diff options
Diffstat (limited to 'cpu/mcf532x')
-rw-r--r-- | cpu/mcf532x/cpu.c | 2 | ||||
-rw-r--r-- | cpu/mcf532x/cpu_init.c | 50 | ||||
-rw-r--r-- | cpu/mcf532x/interrupts.c | 8 | ||||
-rw-r--r-- | cpu/mcf532x/speed.c | 4 | ||||
-rw-r--r-- | cpu/mcf532x/start.S | 38 |
5 files changed, 51 insertions, 51 deletions
diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c index 260d6e6..8c496a2 100644 --- a/cpu/mcf532x/cpu.c +++ b/cpu/mcf532x/cpu.c @@ -117,7 +117,7 @@ int watchdog_init(void) u32 wdog_module = 0; /* set timeout and enable watchdog */ - wdog_module = ((CFG_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT); + wdog_module = ((CONFIG_SYS_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT); #ifdef CONFIG_M5329 wdp->mr = (wdog_module / 8192); #else diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index 93086f7..d348e29 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -63,46 +63,46 @@ void cpu_init_f(void) /* Port configuration */ gpio->par_cs = 0; -#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) - fbcs->csar0 = CFG_CS0_BASE; - fbcs->cscr0 = CFG_CS0_CTRL; - fbcs->csmr0 = CFG_CS0_MASK; +#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) + fbcs->csar0 = CONFIG_SYS_CS0_BASE; + fbcs->cscr0 = CONFIG_SYS_CS0_CTRL; + fbcs->csmr0 = CONFIG_SYS_CS0_MASK; #endif -#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) +#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL)) /* Latch chipselect */ gpio->par_cs |= GPIO_PAR_CS1; - fbcs->csar1 = CFG_CS1_BASE; - fbcs->cscr1 = CFG_CS1_CTRL; - fbcs->csmr1 = CFG_CS1_MASK; + fbcs->csar1 = CONFIG_SYS_CS1_BASE; + fbcs->cscr1 = CONFIG_SYS_CS1_CTRL; + fbcs->csmr1 = CONFIG_SYS_CS1_MASK; #endif -#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) +#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL)) gpio->par_cs |= GPIO_PAR_CS2; - fbcs->csar2 = CFG_CS2_BASE; - fbcs->cscr2 = CFG_CS2_CTRL; - fbcs->csmr2 = CFG_CS2_MASK; + fbcs->csar2 = CONFIG_SYS_CS2_BASE; + fbcs->cscr2 = CONFIG_SYS_CS2_CTRL; + fbcs->csmr2 = CONFIG_SYS_CS2_MASK; #endif -#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) +#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL)) gpio->par_cs |= GPIO_PAR_CS3; - fbcs->csar3 = CFG_CS3_BASE; - fbcs->cscr3 = CFG_CS3_CTRL; - fbcs->csmr3 = CFG_CS3_MASK; + fbcs->csar3 = CONFIG_SYS_CS3_BASE; + fbcs->cscr3 = CONFIG_SYS_CS3_CTRL; + fbcs->csmr3 = CONFIG_SYS_CS3_MASK; #endif -#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) +#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL)) gpio->par_cs |= GPIO_PAR_CS4; - fbcs->csar4 = CFG_CS4_BASE; - fbcs->cscr4 = CFG_CS4_CTRL; - fbcs->csmr4 = CFG_CS4_MASK; + fbcs->csar4 = CONFIG_SYS_CS4_BASE; + fbcs->cscr4 = CONFIG_SYS_CS4_CTRL; + fbcs->csmr4 = CONFIG_SYS_CS4_MASK; #endif -#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) +#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL)) gpio->par_cs |= GPIO_PAR_CS5; - fbcs->csar5 = CFG_CS5_BASE; - fbcs->cscr5 = CFG_CS5_CTRL; - fbcs->csmr5 = CFG_CS5_MASK; + fbcs->csar5 = CONFIG_SYS_CS5_BASE; + fbcs->cscr5 = CONFIG_SYS_CS5_CTRL; + fbcs->csmr5 = CONFIG_SYS_CS5_MASK; #endif #ifdef CONFIG_FSL_I2C @@ -125,7 +125,7 @@ void uart_port_conf(void) volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); break; diff --git a/cpu/mcf532x/interrupts.c b/cpu/mcf532x/interrupts.c index ff50d7d..d6c8205 100644 --- a/cpu/mcf532x/interrupts.c +++ b/cpu/mcf532x/interrupts.c @@ -28,7 +28,7 @@ int interrupt_init(void) { - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); /* Make sure all interrupts are disabled */ intp->imrh0 |= 0xFFFFFFFF; @@ -41,9 +41,9 @@ int interrupt_init(void) #if defined(CONFIG_MCFTMR) void dtimer_intr_setup(void) { - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); - intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; - intp->imrh0 &= ~CFG_TMRINTR_MASK; + intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI; + intp->imrh0 &= ~CONFIG_SYS_TMRINTR_MASK; } #endif diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index a11e425..1e40374 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -197,7 +197,7 @@ int clock_pll(int fsys, int flags) */ /* software workaround for SDRAM opeartion after exiting LIMP mode errata */ - *sdram_workaround = CFG_SDRAM_BASE; + *sdram_workaround = CONFIG_SYS_SDRAM_BASE; /* wait for DQS logic to relock */ for (i = 0; i < 0x200; i++) ; @@ -210,7 +210,7 @@ int clock_pll(int fsys, int flags) */ int get_clocks(void) { - gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000; + gd->bus_clk = clock_pll(CONFIG_SYS_CLK / 1000, 0) * 1000; gd->cpu_clk = (gd->bus_clk * 3); #ifdef CONFIG_FSL_I2C diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index c806f7a..7a3eb5f 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -127,10 +127,10 @@ _start: move.w #0x2700,%sr /* Mask off Interrupt */ /* Set vector base register at the beginning of the Flash */ - move.l #CFG_FLASH_BASE, %d0 + move.l #CONFIG_SYS_FLASH_BASE, %d0 movec %d0, %VBR - move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 /* invalidate and disable cache */ @@ -142,14 +142,14 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2 move.l %d0, (%a1) move.l %d0, (%a2) /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ - move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- move.l #__got_start, %a5 /* put relocation table address to a5 */ @@ -180,7 +180,7 @@ relocate_code: move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ move.l 16(%a6), %a0 /* Save copy of Destination Address */ - move.l #CFG_MONITOR_BASE, %a1 + move.l #CONFIG_SYS_MONITOR_BASE, %a1 move.l #__init_end, %a2 move.l %a0, %a3 @@ -195,7 +195,7 @@ relocate_code: * initialization, now running from RAM. */ move.l %a0, %a1 - add.l #(in_ram - CFG_MONITOR_BASE), %a1 + add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1 jmp (%a1) in_ram: @@ -205,9 +205,9 @@ clear_bss: * Now clear BSS segment */ move.l %a0, %a1 - add.l #(_sbss - CFG_MONITOR_BASE),%a1 + add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1 move.l %a0, %d1 - add.l #(_ebss - CFG_MONITOR_BASE),%d1 + add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1 6: clr.l (%a1)+ cmp.l %a1,%d1 @@ -217,11 +217,11 @@ clear_bss: * fix got table in RAM */ move.l %a0, %a1 - add.l #(__got_start - CFG_MONITOR_BASE),%a1 + add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1 move.l %a1,%a5 /* * fix got pointer register a5 */ move.l %a0, %a2 - add.l #(__got_end - CFG_MONITOR_BASE),%a2 + add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2 7: move.l (%a1),%d1 @@ -233,7 +233,7 @@ clear_bss: /* calculate relative jump to board_init_r in ram */ move.l %a0, %a1 - add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 /* set parameters for board_init_r */ move.l %a0,-(%sp) /* dest_addr */ @@ -268,14 +268,14 @@ _int_handler: icache_enable: move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ - move.l #(CFG_SDRAM_BASE + 0x1c000), %d0 + move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 movec %d0, %ACR0 /* Enable cache */ move.l #0x80000200, %d0 /* Setup cache mask */ movec %d0, %CACR /* Enable cache */ nop - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 moveq #1, %d0 move.l %d0, (%a1) rts @@ -288,14 +288,14 @@ icache_disable: movec %d0, %ACR0 movec %d0, %ACR1 - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 moveq #0, %d0 move.l %d0, (%a1) rts .globl icache_status icache_status: - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 move.l (%a1), %d0 rts @@ -307,7 +307,7 @@ icache_invalid: .globl dcache_enable dcache_enable: - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 moveq #1, %d0 move.l %d0, (%a1) rts @@ -315,14 +315,14 @@ dcache_enable: /* No dcache, just a dummy function */ .globl dcache_disable dcache_disable: - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 moveq #0, %d0 move.l %d0, (%a1) rts .globl dcache_status dcache_status: - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 move.l (%a1), %d0 rts |