summaryrefslogtreecommitdiff
path: root/cpu/mcf52x2
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mcf52x2')
-rw-r--r--cpu/mcf52x2/cpu.c23
-rw-r--r--cpu/mcf52x2/cpu_init.c112
-rw-r--r--cpu/mcf52x2/interrupts.c16
-rw-r--r--cpu/mcf52x2/serial.c10
-rw-r--r--cpu/mcf52x2/speed.c4
-rw-r--r--cpu/mcf52x2/start.S33
6 files changed, 192 insertions, 6 deletions
diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c
index b012222..32a524f 100644
--- a/cpu/mcf52x2/cpu.c
+++ b/cpu/mcf52x2/cpu.c
@@ -34,6 +34,10 @@
#endif
+#ifdef CONFIG_M5249
+#include <asm/m5249.h>
+#endif
+
#ifdef CONFIG_M5272
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
@@ -121,3 +125,22 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
return 0;
};
#endif
+
+#ifdef CONFIG_M5249 /* test-only: todo... */
+int checkcpu (void)
+{
+ char buf[32];
+
+ printf ("CPU: MOTOROLA Coldfire MCF5249 at %s MHz\n", strmhz(buf, CFG_CLK));
+ return 0;
+}
+
+int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
+ /* enable watchdog, set timeout to 0 and wait */
+ mbar_writeByte(MCFSIM_SYPCR, 0xc0);
+ while (1);
+
+ /* we don't return! */
+ return 0;
+};
+#endif
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 8aff8f1..350c431 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -34,7 +34,11 @@
#include <asm/immap_5282.h>
#endif
-#ifdef CONFIG_M5272
+#ifdef CONFIG_M5249
+#include <asm/m5249.h>
+#endif
+
+#if defined(CONFIG_M5272)
/*
* Breath some life into the CPU...
*
@@ -118,7 +122,7 @@ int cpu_init_r (void)
{
return (0);
}
-#endif /* #ifdef CONFIG_M5272 */
+#endif /* #if defined(CONFIG_M5272) */
#ifdef CONFIG_M5282
@@ -142,3 +146,107 @@ int cpu_init_r (void)
return (0);
}
#endif
+
+#if defined(CONFIG_M5249)
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (void)
+{
+#ifndef CFG_PLL_BYPASS
+ /*
+ * Setup the PLL to run at the specified speed
+ *
+ */
+ volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR);
+ unsigned long pllcr;
+#ifdef CFG_FAST_CLK
+ pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */
+#else
+ pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */
+#endif
+ cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */
+ mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */
+ mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */
+ pllcr ^= 0x00000001; /* Set pll bypass to 1 */
+ mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */
+ udelay(0x20); /* Wait for a lock ... */
+#endif /* #ifndef CFG_PLL_BYPASS */
+
+ /*
+ * NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins
+ * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins
+ * which is their primary function.
+ * ~Jeremy
+ */
+ mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC);
+ mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC);
+ mbar2_writeLong(MCFSIM_GPIO_EN, CFG_GPIO_EN);
+ mbar2_writeLong(MCFSIM_GPIO1_EN, CFG_GPIO1_EN);
+ mbar2_writeLong(MCFSIM_GPIO_OUT, CFG_GPIO_OUT);
+ mbar2_writeLong(MCFSIM_GPIO1_OUT, CFG_GPIO1_OUT);
+
+ /*
+ * dBug Compliance:
+ * You can verify these values by using dBug's 'ird'
+ * (Internal Register Display) command
+ * ~Jeremy
+ *
+ */
+ mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */
+ mbar_writeByte(MCFSIM_SYPCR, 0x00);
+ mbar_writeByte(MCFSIM_SWIVR, 0x0f);
+ mbar_writeByte(MCFSIM_SWSR, 0x00);
+ mbar_writeLong(MCFSIM_IMR, 0xfffffbff);
+ mbar_writeByte(MCFSIM_SWDICR, 0x00);
+ mbar_writeByte(MCFSIM_TIMER1ICR, 0x00);
+ mbar_writeByte(MCFSIM_TIMER2ICR, 0x88);
+ mbar_writeByte(MCFSIM_I2CICR, 0x00);
+ mbar_writeByte(MCFSIM_UART1ICR, 0x00);
+ mbar_writeByte(MCFSIM_UART2ICR, 0x00);
+ mbar_writeByte(MCFSIM_ICR6, 0x00);
+ mbar_writeByte(MCFSIM_ICR7, 0x00);
+ mbar_writeByte(MCFSIM_ICR8, 0x00);
+ mbar_writeByte(MCFSIM_ICR9, 0x00);
+ mbar_writeByte(MCFSIM_QSPIICR, 0x00);
+
+ mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080);
+ mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
+ mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
+ mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */
+
+ /* Setup interrupt priorities for gpio7 */
+ /* mbar2_writeLong(MCFSIM_INTLEV5, 0x70000000); */
+
+ /* IDE Config registers */
+ mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020);
+ mbar2_writeLong(MCFSIM_IDECONFIG2, 0x00000000);
+
+ /*
+ * Setup chip selects...
+ */
+
+ mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1);
+ mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1);
+ mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1);
+
+ mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0);
+ mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0);
+ mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0);
+
+ /* enable instruction cache now */
+ icache_enable();
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r (void)
+{
+ return (0);
+}
+#endif /* #if defined(CONFIG_M5249) */
diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c
index 1836f27..868df39 100644
--- a/cpu/mcf52x2/interrupts.c
+++ b/cpu/mcf52x2/interrupts.c
@@ -37,6 +37,10 @@
#include <asm/immap_5282.h>
#endif
+#ifdef CONFIG_M5249
+#include <asm/m5249.h>
+#endif
+
#define NR_IRQS 31
@@ -142,10 +146,11 @@ void int_handler (struct pt_regs *fp)
irq_vecs[vec -
vec_base].handler (irq_vecs[vec - vec_base].arg);
} else {
- printf ("\nBogus External Interrupt Vector %ld\n", vec);
+ printf ("\nBogus External Interrupt Vector %d\n", vec);
}
}
+
#ifdef CONFIG_M5272
int interrupt_init (void)
{
@@ -172,3 +177,12 @@ int interrupt_init (void)
return 0;
}
#endif
+
+#ifdef CONFIG_M5249
+int interrupt_init (void)
+{
+ enable_interrupts ();
+
+ return 0;
+}
+#endif
diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
index fbbd14d..c730922 100644
--- a/cpu/mcf52x2/serial.c
+++ b/cpu/mcf52x2/serial.c
@@ -34,11 +34,19 @@
#include <asm/m5282.h>
#endif
+#ifdef CONFIG_M5249
+#include <asm/m5249.h>
+#endif
+
+#ifdef CONFIG_M5249
+#define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a))
+#else
#define DoubleClock(a) ((double)(CFG_CLK) / 32.0 / (double)(a))
+#endif
void rs_serial_setbaudrate(int port,int baudrate)
{
-#ifdef CONFIG_M5272
+#if defined(CONFIG_M5272) || defined(CONFIG_M5249)
volatile unsigned char *uartp;
double clock, fraction;
diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c
index 8d5c92f..519c992 100644
--- a/cpu/mcf52x2/speed.c
+++ b/cpu/mcf52x2/speed.c
@@ -32,6 +32,10 @@ int get_clocks (void)
DECLARE_GLOBAL_DATA_PTR;
gd->cpu_clk = CFG_CLK;
+#ifdef CONFIG_M5249
+ gd->bus_clk = gd->cpu_clk / 2;
+#else
gd->bus_clk = gd->cpu_clk;
+#endif
return (0);
}
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index cf1b97d..b4926e2 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -110,13 +110,19 @@ _start:
movec %d0, %VBR
#endif
-#ifdef CONFIG_M5272
+#if defined(CONFIG_M5272) || defined(CONFIG_M5249)
move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */
move.c %d0, %MBAR
+ /*** The 5249 has MBAR2 as well ***/
+#ifdef CFG_MBAR2
+ move.l #(CFG_MBAR2 + 1), %d0 /* Get MBAR2 address */
+ movec %d0, #0xc0e /* Set MBAR2 */
+#endif
+
move.l #(CFG_INIT_RAM_ADDR + 1), %d0
movec %d0, %RAMBAR0
-#endif
+#endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */
#ifdef CONFIG_M5282
/* Initialize IPSBAR */
@@ -287,6 +293,28 @@ icache_enable:
rts
#endif
+#ifdef CONFIG_M5249
+ .globl icache_enable
+icache_enable:
+ /*
+ * Note: The 5249 Documentation doesn't give a bit position for CINV!
+ * From the 5272 and the 5307 documentation, I have deduced that it is
+ * probably CACR[24]. Should someone say something to Motorola?
+ * ~Jeremy
+ */
+ move.l #0x01000000, %d0 /* Invalidate whole cache */
+ move.c %d0,%CACR
+ move.l #0xff00c000, %d0 /* Set FLASH cachable: always match (SM=0b10) */
+ move.c %d0, %ACR0
+ move.l #0x0000c000, %d0 /* Set SDRAM cachable: always match (SM=0b10) */
+ move.c %d0, %ACR1
+ move.l #0x90000200, %d0 /* Set cache enable cmd */
+ move.c %d0,%CACR
+ moveq #1, %d0
+ move.l %d0, icache_state
+ rts
+#endif
+
.globl icache_disable
icache_disable:
move.l #0x00000100, %d0 /* Setup cache mask */
@@ -307,6 +335,7 @@ icache_status:
icache_state:
.long 1
+
/*------------------------------------------------------------------------------*/
.globl version_string