diff options
Diffstat (limited to 'cpu/mcf52x2/cpu_init.c')
| -rw-r--r-- | cpu/mcf52x2/cpu_init.c | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 451e3f3..1748ea9 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -2,6 +2,10 @@ * (C) Copyright 2003 * Josef Baumgartner <josef.baumgartner@telex.de> * + * MCF5282 additionals + * (C) Copyright 2005 + * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de> + * * See file CREDITS for list of people who contributed to this * project. * @@ -172,7 +176,180 @@ int cpu_init_r (void) */ void cpu_init_f (void) { +#ifndef CONFIG_WATCHDOG + /* disable watchdog if we aren't using it */ + MCFWTM_WCR = 0; +#endif + +#ifndef CONFIG_MONITOR_IS_IN_RAM + /* Set speed /PLL */ + MCFCLOCK_SYNCR = MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD); + + /* Set up the GPIO ports */ +#ifdef CFG_PEPAR + MCFGPIO_PEPAR = CFG_PEPAR; +#endif +#ifdef CFG_PFPAR + MCFGPIO_PFPAR = CFG_PFPAR; +#endif +#ifdef CFG_PJPAR + MCFGPIO_PJPAR = CFG_PJPAR; +#endif +#ifdef CFG_PSDPAR + MCFGPIO_PSDPAR = CFG_PSDPAR; +#endif +#ifdef CFG_PASPAR + MCFGPIO_PASPAR = CFG_PASPAR; +#endif +#ifdef CFG_PEHLPAR + MCFGPIO_PEHLPAR = CFG_PEHLPAR; +#endif +#ifdef CFG_PQSPAR + MCFGPIO_PQSPAR = CFG_PQSPAR; +#endif +#ifdef CFG_PTCPAR + MCFGPIO_PTCPAR = CFG_PTCPAR; +#endif +#ifdef CFG_PTDPAR + MCFGPIO_PTDPAR = CFG_PTDPAR; +#endif +#ifdef CFG_PUAPAR + MCFGPIO_PUAPAR = CFG_PUAPAR; +#endif + +#ifdef CFG_DDRUA + MCFGPIO_DDRUA = CFG_DDRUA; +#endif + + /* This is probably a bad place to setup chip selects, but everyone + else is doing it! */ + +#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \ + defined(CFG_CS0_WIDTH) & defined(CFG_CS0_RO) & \ + defined(CFG_CS0_WS) + + MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; + + #if (CFG_CS0_WIDTH == 8) + #define CFG_CS0_PS MCFCSM_CSCR_PS_8 + #elif (CFG_CS0_WIDTH == 16) + #define CFG_CS0_PS MCFCSM_CSCR_PS_16 + #elif (CFG_CS0_WIDTH == 32) + #define CFG_CS0_PS MCFCSM_CSCR_PS_32 + #else + #error "CFG_CS0_WIDTH: Fault - wrong bus with for CS0" + #endif + MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS) + |CFG_CS0_PS + |MCFCSM_CSCR_AA; + + #if (CFG_CS0_RO != 0) + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1) + |MCFCSM_CSMR_WP|MCFCSM_CSMR_V; + #else + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1)|MCFCSM_CSMR_V; + #endif +#else + #waring "Chip Select 0 are not initialized/used" +#endif + +#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \ + defined(CFG_CS1_WIDTH) & defined(CFG_CS1_RO) & \ + defined(CFG_CS1_WS) + + MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF; + + #if (CFG_CS1_WIDTH == 8) + #define CFG_CS1_PS MCFCSM_CSCR_PS_8 + #elif (CFG_CS1_WIDTH == 16) + #define CFG_CS1_PS MCFCSM_CSCR_PS_16 + #elif (CFG_CS1_WIDTH == 32) + #define CFG_CS1_PS MCFCSM_CSCR_PS_32 + #else + #error "CFG_CS1_WIDTH: Fault - wrong bus with for CS1" + #endif + MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS) + |CFG_CS1_PS + |MCFCSM_CSCR_AA; + + #if (CFG_CS1_RO != 0) + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1) + |MCFCSM_CSMR_WP + |MCFCSM_CSMR_V; + #else + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1) + |MCFCSM_CSMR_V; + #endif +#else + #warning "Chip Select 1 are not initialized/used" +#endif + +#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \ + defined(CFG_CS2_WIDTH) & defined(CFG_CS2_RO) & \ + defined(CFG_CS2_WS) + + MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF; + + #if (CFG_CS2_WIDTH == 8) + #define CFG_CS2_PS MCFCSM_CSCR_PS_8 + #elif (CFG_CS2_WIDTH == 16) + #define CFG_CS2_PS MCFCSM_CSCR_PS_16 + #elif (CFG_CS2_WIDTH == 32) + #define CFG_CS2_PS MCFCSM_CSCR_PS_32 + #else + #error "CFG_CS2_WIDTH: Fault - wrong bus with for CS2" + #endif + MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS) + |CFG_CS2_PS + |MCFCSM_CSCR_AA; + + #if (CFG_CS2_RO != 0) + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1) + |MCFCSM_CSMR_WP + |MCFCSM_CSMR_V; + #else + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1) + |MCFCSM_CSMR_V; + #endif +#else + #warning "Chip Select 2 are not initialized/used" +#endif + +#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \ + defined(CFG_CS3_WIDTH) & defined(CFG_CS3_RO) & \ + defined(CFG_CS3_WS) + + MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF; + + #if (CFG_CS3_WIDTH == 8) + #define CFG_CS3_PS MCFCSM_CSCR_PS_8 + #elif (CFG_CS3_WIDTH == 16) + #define CFG_CS3_PS MCFCSM_CSCR_PS_16 + #elif (CFG_CS3_WIDTH == 32) + #define CFG_CS3_PS MCFCSM_CSCR_PS_32 + #else + #error "CFG_CS3_WIDTH: Fault - wrong bus with for CS1" + #endif + MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS) + |CFG_CS3_PS + |MCFCSM_CSCR_AA; + + #if (CFG_CS3_RO != 0) + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1) + |MCFCSM_CSMR_WP + |MCFCSM_CSMR_V; + #else + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1) + |MCFCSM_CSMR_V; + #endif +#else + #warning "Chip Select 3 are not initialized/used" +#endif + +#endif /* CONFIG_MONITOR_IS_IN_RAM */ + /* defer enabling cache until boot (see do_go) */ + /* icache_enable(); */ } /* |