diff options
Diffstat (limited to 'cpu/leon2/start.S')
| -rw-r--r-- | cpu/leon2/start.S | 662 |
1 files changed, 0 insertions, 662 deletions
diff --git a/cpu/leon2/start.S b/cpu/leon2/start.S deleted file mode 100644 index b1f1eb5..0000000 --- a/cpu/leon2/start.S +++ /dev/null @@ -1,662 +0,0 @@ -/* This is where the SPARC/LEON3 starts - * Copyright (C) 2007, - * Daniel Hellstrom, daniel@gaisler.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/asmmacro.h> -#include <asm/winmacro.h> -#include <asm/psr.h> -#include <asm/stack.h> -#include <asm/leon.h> -#include <timestamp.h> -#include <version.h> - -/* Entry for traps which jump to a programmer-specified trap handler. */ -#define TRAPR(H) \ - wr %g0, 0xfe0, %psr; \ - mov %g0, %tbr; \ - ba (H); \ - mov %g0, %wim; - -#define TRAP(H) \ - mov %psr, %l0; \ - ba (H); \ - nop; nop; - -#define TRAPI(ilevel) \ - mov ilevel, %l7; \ - mov %psr, %l0; \ - b _irq_entry; \ - mov %wim, %l3 - -/* Unexcpected trap will halt the processor by forcing it to error state */ -#undef BAD_TRAP -#define BAD_TRAP ta 0; nop; nop; nop; - -/* Software trap. Treat as BAD_TRAP for the time being... */ -#define SOFT_TRAP TRAP(_hwerr) - -#define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */ -#define WIM_INIT 2 - -/* All traps low-level code here must end with this macro. */ -#define RESTORE_ALL b ret_trap_entry; clr %l6; - -#define WRITE_PAUSE nop;nop;nop - -WINDOWSIZE = (16 * 4) -ARGPUSHSIZE = (6 * 4) -ARGPUSH = (WINDOWSIZE + 4) -MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4) - -/* Number of register windows */ -#ifndef CONFIG_SYS_SPARC_NWINDOWS -#error Must define number of SPARC register windows, default is 8 -#endif - -#define STACK_ALIGN 8 -#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1)) - - .section ".start", "ax" - .globl _start, start, _trap_table - .globl _irq_entry, nmi_trap - .globl _reset_reloc - -/* at address 0 - * Hardware traps - */ -start: -_start: -_trap_table: - TRAPR(_hardreset); ! 00 reset trap - BAD_TRAP; ! 01 instruction_access_exception - BAD_TRAP; ! 02 illegal_instruction - BAD_TRAP; ! 03 priveleged_instruction - BAD_TRAP; ! 04 fp_disabled - TRAP(_window_overflow); ! 05 window_overflow - TRAP(_window_underflow); ! 06 window_underflow - BAD_TRAP; ! 07 Memory Address Not Aligned - BAD_TRAP; ! 08 Floating Point Exception - BAD_TRAP; ! 09 Data Miss Exception - BAD_TRAP; ! 0a Tagged Instruction Ovrflw - BAD_TRAP; ! 0b Watchpoint Detected - BAD_TRAP; ! 0c - BAD_TRAP; ! 0d - BAD_TRAP; ! 0e - BAD_TRAP; ! 0f - BAD_TRAP; ! 10 - TRAPI(1); ! 11 IRQ level 1 - TRAPI(2); ! 12 IRQ level 2 - TRAPI(3); ! 13 IRQ level 3 - TRAPI(4); ! 14 IRQ level 4 - TRAPI(5); ! 15 IRQ level 5 - TRAPI(6); ! 16 IRQ level 6 - TRAPI(7); ! 17 IRQ level 7 - TRAPI(8); ! 18 IRQ level 8 - TRAPI(9); ! 19 IRQ level 9 - TRAPI(10); ! 1a IRQ level 10 - TRAPI(11); ! 1b IRQ level 11 - TRAPI(12); ! 1c IRQ level 12 - TRAPI(13); ! 1d IRQ level 13 - TRAPI(14); ! 1e IRQ level 14 - TRAP(_nmi_trap); ! 1f IRQ level 15 / - ! NMI (non maskable interrupt) - BAD_TRAP; ! 20 r_register_access_error - BAD_TRAP; ! 21 instruction access error - BAD_TRAP; ! 22 - BAD_TRAP; ! 23 - BAD_TRAP; ! 24 co-processor disabled - BAD_TRAP; ! 25 uniplemented FLUSH - BAD_TRAP; ! 26 - BAD_TRAP; ! 27 - BAD_TRAP; ! 28 co-processor exception - BAD_TRAP; ! 29 data access error - BAD_TRAP; ! 2a division by zero - BAD_TRAP; ! 2b data store error - BAD_TRAP; ! 2c data access MMU miss - BAD_TRAP; ! 2d - BAD_TRAP; ! 2e - BAD_TRAP; ! 2f - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f - - /* implementaion dependent */ - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77 - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b - BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f - - /* Software traps, not handled */ - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 80-83 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 84-87 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 88-8b - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 8c-8f - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 90-93 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 94-97 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 98-9b - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 9c-9f - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a0-a3 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a4-a7 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a8-ab - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ac-af - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b0-b3 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b4-b7 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b8-bb - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! bc-bf - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c0-c3 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c4-c7 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c8-cb - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! cc-cf - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d0-d3 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d4-d7 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d8-db - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! dc-df - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e0-e3 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e4-e7 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e8-eb - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ec-ef - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f0-f3 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f4-f7 - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f8-fb - SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! fc-ff -/* - * Version string - */ - - .data - .globl version_string -version_string: - .ascii U_BOOT_VERSION - .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")" - .ascii CONFIG_IDENT_STRING, "\0" - - .section ".text" - .align 4 - -_hardreset: -1000: - flush - nop - nop - nop - - /* Init Cache */ - set (LEON2_PREGS+LEON_REG_CACHECTRL_OFFSET), %g1 - set 0x0081000f, %g2 - st %g2, [%g1] - - mov %g0, %y - clr %g1 - clr %g2 - clr %g3 - clr %g4 - clr %g5 - clr %g6 - clr %g7 - - mov %asr17, %g3 - and %g3, 0x1f, %g3 -clear_window: - mov %g0, %l0 - mov %g0, %l1 - mov %g0, %l2 - mov %g0, %l3 - mov %g0, %l4 - mov %g0, %l5 - mov %g0, %l6 - mov %g0, %l7 - mov %g0, %o0 - mov %g0, %o1 - mov %g0, %o2 - mov %g0, %o3 - mov %g0, %o4 - mov %g0, %o5 - mov %g0, %o6 - mov %g0, %o7 - subcc %g3, 1, %g3 - bge clear_window - save - -leon2_init: - /* LEON2 Register Base in g1 */ - set LEON2_PREGS, %g1 - -leon2_init_cache: - /* Set Cache control register */ - set 0x1000f, %g2 - st %g2, [%g1 + 0x14] - -leon2_init_clear: - - /* Clear LEON2 registers */ - st %g0, [%g1 + LEON2_ECTRL] - st %g0, [%g1 + LEON2_IMASK] - st %g0, [%g1 + LEON2_IPEND] - st %g0, [%g1 + LEON2_IFORCE] - st %g0, [%g1 + LEON2_ICLEAR] - st %g0, [%g1 + LEON2_IOREG] - st %g0, [%g1 + LEON2_IODIR] - st %g0, [%g1 + LEON2_IOICONF] - st %g0, [%g1 + LEON2_UCTRL0] - st %g0, [%g1 + LEON2_UCTRL1] - -leon2_init_ioport: - /* I/O port initialization */ - set 0xaa00, %g2 - st %g2, [%g1 + LEON2_IOREG] - -leon2_init_mctrl: - - /* memory config register 1 */ - set CONFIG_SYS_GRLIB_MEMCFG1, %g2 - ld [%g1], %g3 ! - and %g3, 0x300, %g3 - or %g2, %g3, %g2 - st %g2, [%g1 + LEON2_MCFG1] - set CONFIG_SYS_GRLIB_MEMCFG2, %g2 ! Load memory config register 2 -#if !( defined(TSIM) || !defined(BZIMAGE)) - st %g2, [%g1 + LEON2_MCFG2] ! only for prom version, else done by "dumon -i" -#endif - set CONFIG_SYS_GRLIB_MEMCFG3, %g2 ! Init FT register - st %g2, [%g1 + LEON2_ECTRL] - ld [%g1 + LEON2_ECTRL], %g2 - srl %g2, 30, %g2 - andcc %g2, 3, %g6 - bne,a leon2_init_wim - mov %g0, %asr16 ! clear err_reg - -leon2_init_wim: - set WIM_INIT, %g3 - mov %g3, %wim - -leon2_init_psr: - set 0x1000, %g3 - mov %psr, %g2 - wr %g2, %g3, %psr - nop - nop - nop - -leon2_init_stackp: - set CONFIG_SYS_INIT_SP_OFFSET, %fp - andn %fp, 0x0f, %fp - sub %fp, 64, %sp - -cpu_init_unreloc: - call cpu_init_f - nop - -/* un relocated start address of monitor */ -#define TEXT_START _text - -/* un relocated end address of monitor */ -#define DATA_END __init_end - -reloc: - set TEXT_START,%g2 - set DATA_END,%g3 - set CONFIG_SYS_RELOC_MONITOR_BASE,%g4 -reloc_loop: - ldd [%g2],%l0 - ldd [%g2+8],%l2 - std %l0,[%g4] - std %l2,[%g4+8] - inc 16,%g2 - subcc %g3,%g2,%g0 - bne reloc_loop - inc 16,%g4 - - clr %l0 - clr %l1 - clr %l2 - clr %l3 - clr %g2 - -/* register g4 contain address to start - * This means that BSS must be directly after data and code segments - * - * g3 is length of bss = (__bss_end-__bss_start) - * - */ - -clr_bss: -/* clear bss area (the relocated) */ - set __bss_start,%g2 - set __bss_end,%g3 - sub %g3,%g2,%g3 - add %g3,%g4,%g3 - clr %g1 /* std %g0 uses g0 and g1 */ -/* clearing 16byte a time ==> linker script need to align to 16 byte offset */ -clr_bss_16: - std %g0,[%g4] - std %g0,[%g4+8] - inc 16,%g4 - cmp %g3,%g4 - bne clr_bss_16 - nop - -/* add offsets to GOT table */ -fixup_got: - set __got_start,%g4 - set __got_end,%g3 -/* - * new got offset = (old GOT-PTR (read with ld) - - * CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) + - * Destination Address (from define) - */ - set CONFIG_SYS_RELOC_MONITOR_BASE,%g2 - set TEXT_START, %g1 - add %g4,%g2,%g4 - sub %g4,%g1,%g4 - add %g3,%g2,%g3 - sub %g3,%g1,%g3 - sub %g2,%g1,%g2 ! prepare register with (new base address) - - ! (old base address) -got_loop: - ld [%g4],%l0 ! load old GOT-PTR - add %l0,%g2,%l0 ! increase with (new base address) - - ! (old base) - st %l0,[%g4] - inc 4,%g4 - cmp %g3,%g4 - bne got_loop - nop - -prom_relocate: - set __prom_start, %g2 - set __prom_end, %g3 - set CONFIG_SYS_PROM_OFFSET, %g4 - -prom_relocate_loop: - ldd [%g2],%l0 - ldd [%g2+8],%l2 - std %l0,[%g4] - std %l2,[%g4+8] - inc 16,%g2 - subcc %g3,%g2,%g0 - bne prom_relocate_loop - inc 16,%g4 - -/* Trap table has been moved, lets tell CPU about - * the new trap table address - */ - - set CONFIG_SYS_RELOC_MONITOR_BASE, %g2 - wr %g0, %g2, %tbr - -/* call relocate*/ - nop -/* Call relocated init functions */ -jump: - set cpu_init_f2,%o1 - set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 - add %o1,%o2,%o1 - sub %o1,%g1,%o1 - call %o1 - clr %o0 - - set board_init_f,%o1 - set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 - add %o1,%o2,%o1 - sub %o1,%g1,%o1 - call %o1 - clr %o0 - -dead: ta 0 ! if call returns... - nop - -/* Interrupt handler caller, - * reg L7: interrupt number - * reg L0: psr after interrupt - * reg L1: PC - * reg L2: next PC - * reg L3: wim - */ -_irq_entry: - SAVE_ALL - - or %l0, PSR_PIL, %g2 - wr %g2, 0x0, %psr - WRITE_PAUSE - wr %g2, PSR_ET, %psr - WRITE_PAUSE - mov %l7, %o0 ! irq level - set handler_irq, %o1 - set (CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o2 - add %o1, %o2, %o1 - call %o1 - add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr - or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq - wr %g2, PSR_ET, %psr ! keep ET up - WRITE_PAUSE - - RESTORE_ALL - -!Window overflow trap handler. - .global _window_overflow - -_window_overflow: - - mov %wim, %l3 ! Calculate next WIM - mov %g1, %l7 - srl %l3, 1, %g1 - sll %l3, (CONFIG_SYS_SPARC_NWINDOWS-1) , %l4 - or %l4, %g1, %g1 - - save ! Get into window to be saved. - mov %g1, %wim - nop; - nop; - nop - st %l0, [%sp + 0]; - st %l1, [%sp + 4]; - st %l2, [%sp + 8]; - st %l3, [%sp + 12]; - st %l4, [%sp + 16]; - st %l5, [%sp + 20]; - st %l6, [%sp + 24]; - st %l7, [%sp + 28]; - st %i0, [%sp + 32]; - st %i1, [%sp + 36]; - st %i2, [%sp + 40]; - st %i3, [%sp + 44]; - st %i4, [%sp + 48]; - st %i5, [%sp + 52]; - st %i6, [%sp + 56]; - st %i7, [%sp + 60]; - restore ! Go back to trap window. - mov %l7, %g1 - jmp %l1 ! Re-execute save. - rett %l2 - -/* Window underflow trap handler. */ - - .global _window_underflow - -_window_underflow: - - mov %wim, %l3 ! Calculate next WIM - sll %l3, 1, %l4 - srl %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5 - or %l5, %l4, %l5 - mov %l5, %wim - nop; nop; nop - restore ! Two restores to get into the - restore ! window to restore - ld [%sp + 0], %l0; ! Restore window from the stack - ld [%sp + 4], %l1; - ld [%sp + 8], %l2; - ld [%sp + 12], %l3; - ld [%sp + 16], %l4; - ld [%sp + 20], %l5; - ld [%sp + 24], %l6; - ld [%sp + 28], %l7; - ld [%sp + 32], %i0; - ld [%sp + 36], %i1; - ld [%sp + 40], %i2; - ld [%sp + 44], %i3; - ld [%sp + 48], %i4; - ld [%sp + 52], %i5; - ld [%sp + 56], %i6; - ld [%sp + 60], %i7; - save ! Get back to the trap window. - save - jmp %l1 ! Re-execute restore. - rett %l2 - - retl - -_nmi_trap: - nop - jmp %l1 - rett %l2 - -_hwerr: - ta 0 - nop - nop - b _hwerr ! loop infinite - nop - -/* Registers to not touch at all. */ -#define t_psr l0 /* Set by caller */ -#define t_pc l1 /* Set by caller */ -#define t_npc l2 /* Set by caller */ -#define t_wim l3 /* Set by caller */ -#define t_twinmask l4 /* Set at beginning of this entry routine. */ -#define t_kstack l5 /* Set right before pt_regs frame is built */ -#define t_retpc l6 /* If you change this, change winmacro.h header file */ -#define t_systable l7 /* Never touch this, could be the syscall table ptr. */ -#define curptr g6 /* Set after pt_regs frame is built */ - -trap_setup: -/* build a pt_regs trap frame. */ - sub %fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack - PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2) - - /* See if we are in the trap window. */ - mov 1, %t_twinmask - sll %t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr) - andcc %t_twinmask, %t_wim, %g0 - beq 1f ! in trap window, clean up - nop - - /*------------------------------------------------- - * Spill , adjust %wim and go. - */ - srl %t_wim, 0x1, %g2 ! begin computation of new %wim - - set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1 - - sll %t_wim, %g3, %t_wim ! NWINDOWS-1 - or %t_wim, %g2, %g2 - and %g2, 0xff, %g2 - - save %g0, %g0, %g0 ! get in window to be saved - - /* Set new %wim value */ - wr %g2, 0x0, %wim - - /* Save the kernel window onto the corresponding stack. */ - RW_STORE(sp) - - restore %g0, %g0, %g0 - /*-------------------------------------------------*/ - -1: - /* Trap from kernel with a window available. - * Just do it... - */ - jmpl %t_retpc + 0x8, %g0 ! return to caller - mov %t_kstack, %sp ! jump onto new stack - -#define twin_tmp1 l4 -#define glob_tmp g4 -#define curptr g6 -ret_trap_entry: - wr %t_psr, 0x0, %psr ! enable nesting again, clear ET - - /* Will the rett land us in the invalid window? */ - mov 2, %g1 - sll %g1, %t_psr, %g1 - - set CONFIG_SYS_SPARC_NWINDOWS, %g2 !NWINDOWS - - srl %g1, %g2, %g2 - or %g1, %g2, %g1 - rd %wim, %g2 - andcc %g2, %g1, %g0 - be 1f ! Nope, just return from the trap - sll %g2, 0x1, %g1 - - /* We have to grab a window before returning. */ - set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1 - - srl %g2, %g3, %g2 - or %g1, %g2, %g1 - and %g1, 0xff, %g1 - - wr %g1, 0x0, %wim - - /* Grrr, make sure we load from the right %sp... */ - PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1) - - restore %g0, %g0, %g0 - RW_LOAD(sp) - b 2f - save %g0, %g0, %g0 - - /* Reload the entire frame in case this is from a - * kernel system call or whatever... - */ -1: - PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1) -2: - wr %t_psr, 0x0, %psr - nop; - nop; - nop - - jmp %t_pc - rett %t_npc - -/* This is called from relocated C-code. - * It resets the system by jumping to _start - */ -_reset_reloc: - set start, %l0 - call %l0 - nop |