diff options
Diffstat (limited to 'cpu/i386')
-rw-r--r-- | cpu/i386/sc520/sc520.c | 71 | ||||
-rw-r--r-- | cpu/i386/sc520/sc520_pci.c | 66 | ||||
-rw-r--r-- | cpu/i386/sc520/sc520_ssi.c | 28 | ||||
-rw-r--r-- | cpu/i386/sc520/sc520_timer.c | 31 |
4 files changed, 79 insertions, 117 deletions
diff --git a/cpu/i386/sc520/sc520.c b/cpu/i386/sc520/sc520.c index 1d79210..4b566a7 100644 --- a/cpu/i386/sc520/sc520.c +++ b/cpu/i386/sc520/sc520.c @@ -33,75 +33,35 @@ DECLARE_GLOBAL_DATA_PTR; /* * utility functions for boards based on the AMD sc520 * - * void write_mmcr_byte(u16 mmcr, u8 data) - * void write_mmcr_word(u16 mmcr, u16 data) - * void write_mmcr_long(u16 mmcr, u32 data) - * - * u8 read_mmcr_byte(u16 mmcr) - * u16 read_mmcr_word(u16 mmcr) - * u32 read_mmcr_long(u16 mmcr) - * * void init_sc520(void) * unsigned long init_sc520_dram(void) */ -static u32 mmcr_base= 0xfffef000; - -void write_mmcr_byte(u16 mmcr, u8 data) -{ - writeb(data, mmcr+mmcr_base); -} - -void write_mmcr_word(u16 mmcr, u16 data) -{ - writew(data, mmcr+mmcr_base); -} - -void write_mmcr_long(u16 mmcr, u32 data) -{ - writel(data, mmcr+mmcr_base); -} - -u8 read_mmcr_byte(u16 mmcr) -{ - return readb(mmcr+mmcr_base); -} - -u16 read_mmcr_word(u16 mmcr) -{ - return readw(mmcr+mmcr_base); -} - -u32 read_mmcr_long(u16 mmcr) -{ - return readl(mmcr+mmcr_base); -} - +volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000; void init_sc520(void) { /* Set the UARTxCTL register at it's slower, * baud clock giving us a 1.8432 MHz reference */ - write_mmcr_byte(SC520_UART1CTL, 7); - write_mmcr_byte(SC520_UART2CTL, 7); + sc520_mmcr->uart1ctl = 0x07; + sc520_mmcr->uart2ctl = 0x07; /* first set the timer pin mapping */ - write_mmcr_byte(SC520_CLKSEL, 0x72); /* no clock frequency selected, use 1.1892MHz */ + sc520_mmcr->clksel = 0x72; /* no clock frequency selected, use 1.1892MHz */ /* enable PCI bus arbitrer */ - write_mmcr_byte(SC520_SYSARBCTL,0x02); /* enable concurrent mode */ - - write_mmcr_word(SC520_SYSARBMENB,0x1f); /* enable external grants */ - write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */ + sc520_mmcr->sysarbctl = 0x02; /* enable concurrent mode */ + sc520_mmcr->sysarbmenb = 0x1f; /* enable external grants */ + sc520_mmcr->hbctl = 0x04; /* enable posted-writes */ if (CONFIG_SYS_SC520_HIGH_SPEED) { - write_mmcr_byte(SC520_CPUCTL, 0x2); /* set it to 133 MHz and write back */ + sc520_mmcr->cpuctl = 0x02; /* set it to 133 MHz and write back */ gd->cpu_clk = 133000000; printf("## CPU Speed set to 133MHz\n"); } else { - write_mmcr_byte(SC520_CPUCTL, 1); /* set CPU to 100 MHz and write back cache */ + sc520_mmcr->cpuctl = 0x01; /* set it to 100 MHz and write back */ printf("## CPU Speed set to 100MHz\n"); gd->cpu_clk = 100000000; } @@ -114,7 +74,7 @@ void init_sc520(void) "loop 0b\n": : : "ecx"); /* turn on the SDRAM write buffer */ - write_mmcr_byte(SC520_DBCTL, 0x11); + sc520_mmcr->dbctl = 0x11; /* turn on the cache and disable write through */ asm("movl %%cr0, %%eax\n" @@ -156,10 +116,9 @@ unsigned long init_sc520_dram(void) val = 3; /* 62.4us */ } - write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4)); + sc520_mmcr->drcctl = (sc520_mmcr->drcctl & 0xcf) | (val<<4); - val = read_mmcr_byte(SC520_DRCTMCTL); - val &= 0xf0; + val = sc520_mmcr->drctmctl & 0xf0; if (cas_precharge_delay==3) { val |= 0x04; /* 3T */ @@ -174,12 +133,12 @@ unsigned long init_sc520_dram(void) } else { val |= 1; } - write_mmcr_byte(SC520_DRCTMCTL, val); + sc520_mmcr->drctmctl = val; #endif /* We read-back the configuration of the dram * controller that the assembly code wrote */ - dram_ctrl = read_mmcr_long(SC520_DRCBENDADR); + dram_ctrl = sc520_mmcr->drcbendadr; bd->bi_dram[0].start = 0; if (dram_ctrl & 0x80) { @@ -232,7 +191,7 @@ void reset_cpu(ulong addr) { printf("Resetting using SC520 MMCR\n"); /* Write a '1' to the SYS_RST of the RESCFG MMCR */ - write_mmcr_word(SC520_RESCFG, 0x0001); + sc520_mmcr->rescfg = 0x01; /* NOTREACHED */ } diff --git a/cpu/i386/sc520/sc520_pci.c b/cpu/i386/sc520/sc520_pci.c index 871ad0a..f446c6d 100644 --- a/cpu/i386/sc520/sc520_pci.c +++ b/cpu/i386/sc520/sc520_pci.c @@ -33,23 +33,23 @@ static struct { u16 level_reg; u8 level_bit; } sc520_irq[] = { - { SC520_IRQ0, SC520_MPICMODE, 0x01 }, - { SC520_IRQ1, SC520_MPICMODE, 0x02 }, - { SC520_IRQ2, SC520_SL1PICMODE, 0x02 }, - { SC520_IRQ3, SC520_MPICMODE, 0x08 }, - { SC520_IRQ4, SC520_MPICMODE, 0x10 }, - { SC520_IRQ5, SC520_MPICMODE, 0x20 }, - { SC520_IRQ6, SC520_MPICMODE, 0x40 }, - { SC520_IRQ7, SC520_MPICMODE, 0x80 }, - - { SC520_IRQ8, SC520_SL1PICMODE, 0x01 }, - { SC520_IRQ9, SC520_SL1PICMODE, 0x02 }, - { SC520_IRQ10, SC520_SL1PICMODE, 0x04 }, - { SC520_IRQ11, SC520_SL1PICMODE, 0x08 }, - { SC520_IRQ12, SC520_SL1PICMODE, 0x10 }, - { SC520_IRQ13, SC520_SL1PICMODE, 0x20 }, - { SC520_IRQ14, SC520_SL1PICMODE, 0x40 }, - { SC520_IRQ15, SC520_SL1PICMODE, 0x80 } + { SC520_IRQ0, 0, 0x01 }, + { SC520_IRQ1, 0, 0x02 }, + { SC520_IRQ2, 1, 0x02 }, + { SC520_IRQ3, 0, 0x08 }, + { SC520_IRQ4, 0, 0x10 }, + { SC520_IRQ5, 0, 0x20 }, + { SC520_IRQ6, 0, 0x40 }, + { SC520_IRQ7, 0, 0x80 }, + + { SC520_IRQ8, 1, 0x01 }, + { SC520_IRQ9, 1, 0x02 }, + { SC520_IRQ10, 1, 0x04 }, + { SC520_IRQ11, 1, 0x08 }, + { SC520_IRQ12, 1, 0x10 }, + { SC520_IRQ13, 1, 0x20 }, + { SC520_IRQ14, 1, 0x40 }, + { SC520_IRQ15, 1, 0x80 } }; @@ -77,34 +77,34 @@ int pci_sc520_set_irq(int pci_pin, int irq) /* first disable any non-pci interrupt source that use * this level */ - for (i=SC520_GPTMR0MAP;i<=SC520_GP10IMAP;i++) { - if (i>=SC520_PCIINTAMAP&&i<=SC520_PCIINTDMAP) { - continue; - } - if (read_mmcr_byte(i) == sc520_irq[irq].priority) { - write_mmcr_byte(i, SC520_IRQ_DISABLED); - } + + /* PCI interrupt mapping (A through D)*/ + for (i=0; i<=3 ;i++) { + if (sc520_mmcr->pci_int_map[i] == sc520_irq[irq].priority) + sc520_mmcr->pci_int_map[i] = SC520_IRQ_DISABLED; + } + + /* GP IRQ interrupt mapping */ + for (i=0; i<=10 ;i++) { + if (sc520_mmcr->gp_int_map[i] == sc520_irq[irq].priority) + sc520_mmcr->gp_int_map[i] = SC520_IRQ_DISABLED; } /* Set the trigger to level */ - write_mmcr_byte(sc520_irq[irq].level_reg, - read_mmcr_byte(sc520_irq[irq].level_reg) | sc520_irq[irq].level_bit); + sc520_mmcr->pic_mode[sc520_irq[irq].level_reg] = + sc520_mmcr->pic_mode[sc520_irq[irq].level_reg] | sc520_irq[irq].level_bit; if (pci_pin < 4) { /* PCI INTA-INTD */ /* route the interrupt */ - write_mmcr_byte(SC520_PCIINTAMAP + pci_pin, sc520_irq[irq].priority); - - + sc520_mmcr->pci_int_map[pci_pin] = sc520_irq[irq].priority; } else { /* GPIRQ0-GPIRQ10 used for additional PCI INTS */ - write_mmcr_byte(SC520_GP0IMAP + pci_pin - 4, sc520_irq[irq].priority); + sc520_mmcr->gp_int_map[pci_pin - 4] = sc520_irq[irq].priority; /* also set the polarity in this case */ - write_mmcr_word(SC520_INTPINPOL, - read_mmcr_word(SC520_INTPINPOL) | (1 << (pci_pin-4))); - + sc520_mmcr->intpinpol = sc520_mmcr->intpinpol | (1 << (pci_pin-4)); } /* register the pin */ diff --git a/cpu/i386/sc520/sc520_ssi.c b/cpu/i386/sc520/sc520_ssi.c index dd667ca..8dbe17a 100644 --- a/cpu/i386/sc520/sc520_ssi.c +++ b/cpu/i386/sc520/sc520_ssi.c @@ -61,32 +61,34 @@ int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase) temp |= PHS_INV_ENB; } - write_mmcr_byte(SC520_SSICTL, temp); + sc520_mmcr->ssictl = temp; return 0; } u8 ssi_txrx_byte(u8 data) { - write_mmcr_byte(SC520_SSIXMIT, data); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMITRCV); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - return read_mmcr_byte(SC520_SSIRCV); + sc520_mmcr->ssixmit = data; + while (sc520_mmcr->ssista & SSISTA_BSY); + sc520_mmcr->ssicmd = SSICMD_CMD_SEL_XMITRCV; + while (sc520_mmcr->ssista & SSISTA_BSY); + + return sc520_mmcr->ssircv; } void ssi_tx_byte(u8 data) { - write_mmcr_byte(SC520_SSIXMIT, data); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMIT); + sc520_mmcr->ssixmit = data; + while (sc520_mmcr->ssista & SSISTA_BSY); + sc520_mmcr->ssicmd = SSICMD_CMD_SEL_XMIT; } u8 ssi_rx_byte(void) { - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_RCV); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - return read_mmcr_byte(SC520_SSIRCV); + while (sc520_mmcr->ssista & SSISTA_BSY); + sc520_mmcr->ssicmd = SSICMD_CMD_SEL_RCV; + while (sc520_mmcr->ssista & SSISTA_BSY); + + return sc520_mmcr->ssircv; } diff --git a/cpu/i386/sc520/sc520_timer.c b/cpu/i386/sc520/sc520_timer.c index 2a3425b..23de14b 100644 --- a/cpu/i386/sc520/sc520_timer.c +++ b/cpu/i386/sc520/sc520_timer.c @@ -30,29 +30,29 @@ void sc520_timer_isr(void) { /* Ack the GP Timer Interrupt */ - write_mmcr_byte (SC520_GPTMRSTA, 0x02); + sc520_mmcr->gptmrsta = 0x02; } int timer_init(void) { /* Map GP Timer 1 to Master PIC IR0 */ - write_mmcr_byte (SC520_GPTMR1MAP, 0x01); + sc520_mmcr->gp_tmr_int_map[1] = 0x01; /* Disable GP Timers 1 & 2 - Allow configuration writes */ - write_mmcr_word (SC520_GPTMR1CTL, 0x4000); - write_mmcr_word (SC520_GPTMR2CTL, 0x4000); + sc520_mmcr->gptmr1ctl = 0x4000; + sc520_mmcr->gptmr2ctl = 0x4000; /* Reset GP Timers 1 & 2 */ - write_mmcr_word (SC520_GPTMR1CNT, 0x0000); - write_mmcr_word (SC520_GPTMR2CNT, 0x0000); + sc520_mmcr->gptmr1cnt = 0x0000; + sc520_mmcr->gptmr2cnt = 0x0000; /* Setup GP Timer 2 as a 100kHz (10us) prescaler */ - write_mmcr_word (SC520_GPTMR2MAXCMPA, 83); - write_mmcr_word (SC520_GPTMR2CTL, 0xc001); + sc520_mmcr->gptmr2maxcmpa = 83; + sc520_mmcr->gptmr2ctl = 0xc001; /* Setup GP Timer 1 as a 1000 Hz (1ms) interrupt generator */ - write_mmcr_word (SC520_GPTMR1MAXCMPA, 100); - write_mmcr_word (SC520_GPTMR1CTL, 0xe009); + sc520_mmcr->gptmr1maxcmpa = 100; + sc520_mmcr->gptmr1ctl = 0xe009; /* Register the SC520 specific timer interrupt handler */ register_timer_isr (sc520_timer_isr); @@ -62,7 +62,7 @@ int timer_init(void) unmask_irq (0); /* Clear the GP Timer 1 status register to get the show rolling*/ - write_mmcr_byte (SC520_GPTMRSTA, 0x02); + sc520_mmcr->gptmrsta = 0x02; return 0; } @@ -71,12 +71,13 @@ void udelay(unsigned long usec) { int m = 0; long u; + long temp; - read_mmcr_word (SC520_SWTMRMILLI); - read_mmcr_word (SC520_SWTMRMICRO); + temp = sc520_mmcr->swtmrmilli; + temp = sc520_mmcr->swtmrmicro; do { - m += read_mmcr_word (SC520_SWTMRMILLI); - u = read_mmcr_word (SC520_SWTMRMICRO) + (m * 1000); + m += sc520_mmcr->swtmrmilli; + u = sc520_mmcr->swtmrmicro + (m * 1000); } while (u < usec); } |