summaryrefslogtreecommitdiff
path: root/cpu/i386
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/i386')
-rw-r--r--cpu/i386/interrupts.c2
-rw-r--r--cpu/i386/sc520.c12
-rw-r--r--cpu/i386/sc520_asm.S12
-rw-r--r--cpu/i386/start.S4
-rw-r--r--cpu/i386/timer.c4
5 files changed, 17 insertions, 17 deletions
diff --git a/cpu/i386/interrupts.c b/cpu/i386/interrupts.c
index f340119..f6dbcca 100644
--- a/cpu/i386/interrupts.c
+++ b/cpu/i386/interrupts.c
@@ -509,7 +509,7 @@ int disable_interrupts(void)
}
-#ifdef CFG_RESET_GENERIC
+#ifdef CONFIG_SYS_RESET_GENERIC
void __attribute__ ((regparm(0))) generate_gpf(void);
asm(".globl generate_gpf\n"
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index 640b255..8bcb979 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -113,7 +113,7 @@ void init_sc520(void)
write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */
- if (CFG_SC520_HIGH_SPEED) {
+ if (CONFIG_SYS_SC520_HIGH_SPEED) {
write_mmcr_byte(SC520_CPUCTL, 0x2); /* set it to 133 MHz and write back */
gd->cpu_clk = 133000000;
printf("## CPU Speed set to 133MHz\n");
@@ -145,7 +145,7 @@ unsigned long init_sc520_dram(void)
u32 dram_present=0;
u32 dram_ctrl;
-#ifdef CFG_SDRAM_DRCTMCTL
+#ifdef CONFIG_SYS_SDRAM_DRCTMCTL
/* these memory control registers are set up in the assember part,
* in sc520_asm.S, during 'mem_init'. If we muck with them here,
* after we are running a stack in RAM, we have troubles. Besides,
@@ -156,9 +156,9 @@ unsigned long init_sc520_dram(void)
#else
int val;
- int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
- int refresh_rate = CFG_SDRAM_REFRESH_RATE;
- int ras_cas_delay = CFG_SDRAM_RAS_CAS_DELAY;
+ int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY;
+ int refresh_rate = CONFIG_SYS_SDRAM_REFRESH_RATE;
+ int ras_cas_delay = CONFIG_SYS_SDRAM_RAS_CAS_DELAY;
/* set SDRAM speed here */
@@ -393,7 +393,7 @@ void pci_sc520_init(struct pci_controller *hose)
#endif
-#ifdef CFG_TIMER_SC520
+#ifdef CONFIG_SYS_TIMER_SC520
void reset_timer(void)
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index 34322ea..59ed2b8 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -460,21 +460,21 @@ emptybank:
incl %edi
loop cleanuplp
-#if defined CFG_SDRAM_DRCTMCTL
+#if defined CONFIG_SYS_SDRAM_DRCTMCTL
/* just have your hardware desinger _GIVE_ you what you need here! */
movl $DRCTMCTL, %edi
- movb $CFG_SDRAM_DRCTMCTL,%al
+ movb $CONFIG_SYS_SDRAM_DRCTMCTL,%al
movb (%edi), %al
#else
-#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
+#if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T)
/* set the CAS latency now since it is hard to do
* when we run from the RAM */
movl $DRCTMCTL, %edi /* DRAM timing register */
movb (%edi), %al
-#ifdef CFG_SDRAM_CAS_LATENCY_2T
+#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
andb $0xef, %al
#endif
-#ifdef CFG_SDRAM_CAS_LATENCY_3T
+#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
orb $0x10, %al
#endif
movb %al, (%edi)
@@ -540,7 +540,7 @@ bank0: movl (%edi), %eax
done:
movl %ebx, %eax
-#if CFG_SDRAM_ECC_ENABLE
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
/* A nominal memory test: just a byte at each address line */
movl %eax, %ecx
shrl $0x1, %ecx
diff --git a/cpu/i386/start.S b/cpu/i386/start.S
index 264ac09..f5ad833 100644
--- a/cpu/i386/start.S
+++ b/cpu/i386/start.S
@@ -67,7 +67,7 @@ mem_init_ret:
* (we need atleast bss start+bss size+stack size) */
movl $_i386boot_bss_start, %ecx /* BSS start */
addl $_i386boot_bss_size, %ecx /* BSS size */
- addl $CFG_STACK_SIZE, %ecx
+ addl $CONFIG_SYS_STACK_SIZE, %ecx
cmpl %ecx, %eax
jae mem_ok
@@ -88,7 +88,7 @@ mem_ok:
/* create a stack after the bss */
movl $_i386boot_bss_start, %eax
addl $_i386boot_bss_size, %eax
- addl $CFG_STACK_SIZE, %eax
+ addl $CONFIG_SYS_STACK_SIZE, %eax
movl %eax, %esp
pushl $0
diff --git a/cpu/i386/timer.c b/cpu/i386/timer.c
index 486d927..46db23f 100644
--- a/cpu/i386/timer.c
+++ b/cpu/i386/timer.c
@@ -72,9 +72,9 @@ int timer_init(void)
}
-#ifdef CFG_TIMER_GENERIC
+#ifdef CONFIG_SYS_TIMER_GENERIC
-/* the unit for these is CFG_HZ */
+/* the unit for these is CONFIG_SYS_HZ */
/* FixMe: implement these */
void reset_timer (void)