diff options
Diffstat (limited to 'cpu/i386/sc520.c')
-rw-r--r-- | cpu/i386/sc520.c | 516 |
1 files changed, 0 insertions, 516 deletions
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c deleted file mode 100644 index b958f8d..0000000 --- a/cpu/i386/sc520.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* stuff specific for the sc520, - * but idependent of implementation */ - -#include <config.h> -#include <common.h> -#include <config.h> -#include <pci.h> -#ifdef CONFIG_SC520_SSI -#include <asm/ic/ssi.h> -#endif -#include <asm/io.h> -#include <asm/pci.h> -#include <asm/ic/sc520.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * utility functions for boards based on the AMD sc520 - * - * void write_mmcr_byte(u16 mmcr, u8 data) - * void write_mmcr_word(u16 mmcr, u16 data) - * void write_mmcr_long(u16 mmcr, u32 data) - * - * u8 read_mmcr_byte(u16 mmcr) - * u16 read_mmcr_word(u16 mmcr) - * u32 read_mmcr_long(u16 mmcr) - * - * void init_sc520(void) - * unsigned long init_sc520_dram(void) - * void pci_sc520_init(struct pci_controller *hose) - * - * void reset_timer(void) - * ulong get_timer(ulong base) - * void set_timer(ulong t) - * void udelay(unsigned long usec) - * - */ - -static u32 mmcr_base= 0xfffef000; - -void write_mmcr_byte(u16 mmcr, u8 data) -{ - writeb(data, mmcr+mmcr_base); -} - -void write_mmcr_word(u16 mmcr, u16 data) -{ - writew(data, mmcr+mmcr_base); -} - -void write_mmcr_long(u16 mmcr, u32 data) -{ - writel(data, mmcr+mmcr_base); -} - -u8 read_mmcr_byte(u16 mmcr) -{ - return readb(mmcr+mmcr_base); -} - -u16 read_mmcr_word(u16 mmcr) -{ - return readw(mmcr+mmcr_base); -} - -u32 read_mmcr_long(u16 mmcr) -{ - return readl(mmcr+mmcr_base); -} - - -void init_sc520(void) -{ - /* Set the UARTxCTL register at it's slower, - * baud clock giving us a 1.8432 MHz reference - */ - write_mmcr_byte(SC520_UART1CTL, 7); - write_mmcr_byte(SC520_UART2CTL, 7); - - /* first set the timer pin mapping */ - write_mmcr_byte(SC520_CLKSEL, 0x72); /* no clock frequency selected, use 1.1892MHz */ - - /* enable PCI bus arbitrer */ - write_mmcr_byte(SC520_SYSARBCTL,0x02); /* enable concurrent mode */ - - write_mmcr_word(SC520_SYSARBMENB,0x1f); /* enable external grants */ - write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */ - - - if (CONFIG_SYS_SC520_HIGH_SPEED) { - write_mmcr_byte(SC520_CPUCTL, 0x2); /* set it to 133 MHz and write back */ - gd->cpu_clk = 133000000; - printf("## CPU Speed set to 133MHz\n"); - } else { - write_mmcr_byte(SC520_CPUCTL, 1); /* set CPU to 100 MHz and write back cache */ - printf("## CPU Speed set to 100MHz\n"); - gd->cpu_clk = 100000000; - } - - - /* wait at least one millisecond */ - asm("movl $0x2000,%%ecx\n" - "wait_loop: pushl %%ecx\n" - "popl %%ecx\n" - "loop wait_loop\n": : : "ecx"); - - /* turn on the SDRAM write buffer */ - write_mmcr_byte(SC520_DBCTL, 0x11); - - /* turn on the cache and disable write through */ - asm("movl %%cr0, %%eax\n" - "andl $0x9fffffff, %%eax\n" - "movl %%eax, %%cr0\n" : : : "eax"); -} - -unsigned long init_sc520_dram(void) -{ - bd_t *bd = gd->bd; - - u32 dram_present=0; - u32 dram_ctrl; -#ifdef CONFIG_SYS_SDRAM_DRCTMCTL - /* these memory control registers are set up in the assember part, - * in sc520_asm.S, during 'mem_init'. If we muck with them here, - * after we are running a stack in RAM, we have troubles. Besides, - * these refresh and delay values are better ? simply specified - * outright in the include/configs/{cfg} file since the HW designer - * simply dictates it. - */ -#else - int val; - - int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY; - int refresh_rate = CONFIG_SYS_SDRAM_REFRESH_RATE; - int ras_cas_delay = CONFIG_SYS_SDRAM_RAS_CAS_DELAY; - - /* set SDRAM speed here */ - - refresh_rate/=78; - if (refresh_rate<=1) { - val = 0; /* 7.8us */ - } else if (refresh_rate==2) { - val = 1; /* 15.6us */ - } else if (refresh_rate==3 || refresh_rate==4) { - val = 2; /* 31.2us */ - } else { - val = 3; /* 62.4us */ - } - - write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4)); - - val = read_mmcr_byte(SC520_DRCTMCTL); - val &= 0xf0; - - if (cas_precharge_delay==3) { - val |= 0x04; /* 3T */ - } else if (cas_precharge_delay==4) { - val |= 0x08; /* 4T */ - } else if (cas_precharge_delay>4) { - val |= 0x0c; - } - - if (ras_cas_delay > 3) { - val |= 2; - } else { - val |= 1; - } - write_mmcr_byte(SC520_DRCTMCTL, val); -#endif - - /* We read-back the configuration of the dram - * controller that the assembly code wrote */ - dram_ctrl = read_mmcr_long(SC520_DRCBENDADR); - - bd->bi_dram[0].start = 0; - if (dram_ctrl & 0x80) { - /* bank 0 enabled */ - dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22; - bd->bi_dram[0].size = bd->bi_dram[1].start; - - } else { - bd->bi_dram[0].size = 0; - bd->bi_dram[1].start = bd->bi_dram[0].start; - } - - if (dram_ctrl & 0x8000) { - /* bank 1 enabled */ - dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14; - bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start; - } else { - bd->bi_dram[1].size = 0; - bd->bi_dram[2].start = bd->bi_dram[1].start; - } - - if (dram_ctrl & 0x800000) { - /* bank 2 enabled */ - dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6; - bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start; - } else { - bd->bi_dram[2].size = 0; - bd->bi_dram[3].start = bd->bi_dram[2].start; - } - - if (dram_ctrl & 0x80000000) { - /* bank 3 enabled */ - dram_present = (dram_ctrl & 0x7f000000) >> 2; - bd->bi_dram[3].size = dram_present - bd->bi_dram[3].start; - } else { - bd->bi_dram[3].size = 0; - } - - -#if 0 - printf("Configured %d bytes of dram\n", dram_present); -#endif - gd->ram_size = dram_present; - - return dram_present; -} - - -#ifdef CONFIG_PCI - - -static struct { - u8 priority; - u16 level_reg; - u8 level_bit; -} sc520_irq[] = { - { SC520_IRQ0, SC520_MPICMODE, 0x01 }, - { SC520_IRQ1, SC520_MPICMODE, 0x02 }, - { SC520_IRQ2, SC520_SL1PICMODE, 0x02 }, - { SC520_IRQ3, SC520_MPICMODE, 0x08 }, - { SC520_IRQ4, SC520_MPICMODE, 0x10 }, - { SC520_IRQ5, SC520_MPICMODE, 0x20 }, - { SC520_IRQ6, SC520_MPICMODE, 0x40 }, - { SC520_IRQ7, SC520_MPICMODE, 0x80 }, - - { SC520_IRQ8, SC520_SL1PICMODE, 0x01 }, - { SC520_IRQ9, SC520_SL1PICMODE, 0x02 }, - { SC520_IRQ10, SC520_SL1PICMODE, 0x04 }, - { SC520_IRQ11, SC520_SL1PICMODE, 0x08 }, - { SC520_IRQ12, SC520_SL1PICMODE, 0x10 }, - { SC520_IRQ13, SC520_SL1PICMODE, 0x20 }, - { SC520_IRQ14, SC520_SL1PICMODE, 0x40 }, - { SC520_IRQ15, SC520_SL1PICMODE, 0x80 } -}; - - -/* The interrupt used for PCI INTA-INTD */ -int sc520_pci_ints[15] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1 -}; - -/* utility function to configure a pci interrupt */ -int pci_sc520_set_irq(int pci_pin, int irq) -{ - int i; - -# if 1 - printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq); -#endif - if (irq < 0 || irq > 15) { - return -1; /* illegal irq */ - } - - if (pci_pin < 0 || pci_pin > 15) { - return -1; /* illegal pci int pin */ - } - - /* first disable any non-pci interrupt source that use - * this level */ - for (i=SC520_GPTMR0MAP;i<=SC520_GP10IMAP;i++) { - if (i>=SC520_PCIINTAMAP&&i<=SC520_PCIINTDMAP) { - continue; - } - if (read_mmcr_byte(i) == sc520_irq[irq].priority) { - write_mmcr_byte(i, SC520_IRQ_DISABLED); - } - } - - /* Set the trigger to level */ - write_mmcr_byte(sc520_irq[irq].level_reg, - read_mmcr_byte(sc520_irq[irq].level_reg) | sc520_irq[irq].level_bit); - - - if (pci_pin < 4) { - /* PCI INTA-INTD */ - /* route the interrupt */ - write_mmcr_byte(SC520_PCIINTAMAP + pci_pin, sc520_irq[irq].priority); - - - } else { - /* GPIRQ0-GPIRQ10 used for additional PCI INTS */ - write_mmcr_byte(SC520_GP0IMAP + pci_pin - 4, sc520_irq[irq].priority); - - /* also set the polarity in this case */ - write_mmcr_word(SC520_INTPINPOL, - read_mmcr_word(SC520_INTPINPOL) | (1 << (pci_pin-4))); - - } - - /* register the pin */ - sc520_pci_ints[pci_pin] = irq; - - - return 0; /* OK */ -} - -void pci_sc520_init(struct pci_controller *hose) -{ - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* System memory space */ - pci_set_region(hose->regions + 0, - SC520_PCI_MEMORY_BUS, - SC520_PCI_MEMORY_PHYS, - SC520_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - SC520_PCI_MEM_BUS, - SC520_PCI_MEM_PHYS, - SC520_PCI_MEM_SIZE, - PCI_REGION_MEM); - - /* ISA/PCI memory space */ - pci_set_region(hose->regions + 2, - SC520_ISA_MEM_BUS, - SC520_ISA_MEM_PHYS, - SC520_ISA_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI I/O space */ - pci_set_region(hose->regions + 3, - SC520_PCI_IO_BUS, - SC520_PCI_IO_PHYS, - SC520_PCI_IO_SIZE, - PCI_REGION_IO); - - /* ISA/PCI I/O space */ - pci_set_region(hose->regions + 4, - SC520_ISA_IO_BUS, - SC520_ISA_IO_PHYS, - SC520_ISA_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 5; - - pci_setup_type1(hose, - SC520_REG_ADDR, - SC520_REG_DATA); - - pci_register_hose(hose); - - hose->last_busno = pci_hose_scan(hose); - - /* enable target memory acceses on host brige */ - pci_write_config_word(0, PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - -} - - -#endif - -#ifdef CONFIG_SYS_TIMER_SC520 - - -void reset_timer(void) -{ - write_mmcr_word(SC520_GPTMR0CNT, 0); - write_mmcr_word(SC520_GPTMR0CTL, 0x6001); - -} - -ulong get_timer(ulong base) -{ - /* fixme: 30 or 33 */ - return read_mmcr_word(SC520_GPTMR0CNT) / 33; -} - -void set_timer(ulong t) -{ - /* FixMe: use two cascade coupled timers */ - write_mmcr_word(SC520_GPTMR0CTL, 0x4001); - write_mmcr_word(SC520_GPTMR0CNT, t*33); - write_mmcr_word(SC520_GPTMR0CTL, 0x6001); -} - - -void udelay(unsigned long usec) -{ - int m=0; - long u; - - read_mmcr_word(SC520_SWTMRMILLI); - read_mmcr_word(SC520_SWTMRMICRO); - -#if 0 - /* do not enable this line, udelay is used in the serial driver -> recursion */ - printf("udelay: %ld m.u %d.%d tm.tu %d.%d\n", usec, m, u, tm, tu); -#endif - while (1) { - - m += read_mmcr_word(SC520_SWTMRMILLI); - u = read_mmcr_word(SC520_SWTMRMICRO) + (m * 1000); - - if (usec <= u) { - break; - } - } -} - -#endif - -int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase) -{ - u8 temp=0; - - if (freq >= 8192) { - temp |= CTL_CLK_SEL_4; - } else if (freq >= 4096) { - temp |= CTL_CLK_SEL_8; - } else if (freq >= 2048) { - temp |= CTL_CLK_SEL_16; - } else if (freq >= 1024) { - temp |= CTL_CLK_SEL_32; - } else if (freq >= 512) { - temp |= CTL_CLK_SEL_64; - } else if (freq >= 256) { - temp |= CTL_CLK_SEL_128; - } else if (freq >= 128) { - temp |= CTL_CLK_SEL_256; - } else { - temp |= CTL_CLK_SEL_512; - } - - if (!lsb_first) { - temp |= MSBF_ENB; - } - - if (inv_clock) { - temp |= CLK_INV_ENB; - } - - if (inv_phase) { - temp |= PHS_INV_ENB; - } - - write_mmcr_byte(SC520_SSICTL, temp); - - return 0; -} - -u8 ssi_txrx_byte(u8 data) -{ - write_mmcr_byte(SC520_SSIXMIT, data); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMITRCV); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - return read_mmcr_byte(SC520_SSIRCV); -} - - -void ssi_tx_byte(u8 data) -{ - write_mmcr_byte(SC520_SSIXMIT, data); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMIT); -} - -u8 ssi_rx_byte(void) -{ - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_RCV); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - return read_mmcr_byte(SC520_SSIRCV); -} - -#ifdef CONFIG_SYS_RESET_SC520 -void reset_cpu(ulong addr) -{ - printf("Resetting using SC520 MMCR\n"); - /* Write a '1' to the SYS_RST of the RESCFG MMCR */ - write_mmcr_word(SC520_RESCFG, 0x0001); - - /* NOTREACHED */ -} -#endif |