summaryrefslogtreecommitdiff
path: root/cpu/i386/sc520.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/i386/sc520.c')
-rw-r--r--cpu/i386/sc520.c181
1 files changed, 90 insertions, 91 deletions
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index 500089a..689e775 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -36,26 +36,26 @@
#include <asm/pci.h>
#include <asm/ic/sc520.h>
-/*
- * utility functions for boards based on the AMD sc520
- *
+/*
+ * utility functions for boards based on the AMD sc520
+ *
* void write_mmcr_byte(u16 mmcr, u8 data)
* void write_mmcr_word(u16 mmcr, u16 data)
* void write_mmcr_long(u16 mmcr, u32 data)
- *
+ *
* u8 read_mmcr_byte(u16 mmcr)
* u16 read_mmcr_word(u16 mmcr)
* u32 read_mmcr_long(u16 mmcr)
- *
+ *
* void init_sc520(void)
* unsigned long init_sc520_dram(void)
* void pci_sc520_init(struct pci_controller *hose)
- *
+ *
* void reset_timer(void)
* ulong get_timer(ulong base)
* void set_timer(ulong t)
* void udelay(unsigned long usec)
- *
+ *
*/
static u32 mmcr_base= 0xfffef000;
@@ -67,7 +67,7 @@ void write_mmcr_byte(u16 mmcr, u8 data)
void write_mmcr_word(u16 mmcr, u16 data)
{
- writew(data, mmcr+mmcr_base);
+ writew(data, mmcr+mmcr_base);
}
void write_mmcr_long(u16 mmcr, u32 data)
@@ -82,7 +82,7 @@ u8 read_mmcr_byte(u16 mmcr)
u16 read_mmcr_word(u16 mmcr)
{
- return readw(mmcr+mmcr_base);
+ return readw(mmcr+mmcr_base);
}
u32 read_mmcr_long(u16 mmcr)
@@ -94,19 +94,19 @@ u32 read_mmcr_long(u16 mmcr)
void init_sc520(void)
{
DECLARE_GLOBAL_DATA_PTR;
-
+
/* Set the UARTxCTL register at it's slower,
- * baud clock giving us a 1.8432 MHz reference
+ * baud clock giving us a 1.8432 MHz reference
*/
write_mmcr_byte(SC520_UART1CTL, 7);
write_mmcr_byte(SC520_UART2CTL, 7);
-
+
/* first set the timer pin mapping */
write_mmcr_byte(SC520_CLKSEL, 0x72); /* no clock frequency selected, use 1.1892MHz */
-
+
/* enable PCI bus arbitrer */
write_mmcr_byte(SC520_SYSARBCTL,0x02); /* enable concurrent mode */
-
+
write_mmcr_word(SC520_SYSARBMENB,0x1f); /* enable external grants */
write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */
@@ -120,10 +120,10 @@ void init_sc520(void)
printf("## CPU Speed set to 100MHz\n");
gd->cpu_clk = 100000000;
}
-
+
/* wait at least one millisecond */
- asm("movl $0x2000,%%ecx\n"
+ asm("movl $0x2000,%%ecx\n"
"wait_loop: pushl %%ecx\n"
"popl %%ecx\n"
"loop wait_loop\n": : : "ecx");
@@ -141,19 +141,19 @@ unsigned long init_sc520_dram(void)
{
DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
-
+
u32 dram_present=0;
u32 dram_ctrl;
int val;
-
- int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
- int refresh_rate = CFG_SDRAM_REFRESH_RATE;
+
+ int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
+ int refresh_rate = CFG_SDRAM_REFRESH_RATE;
int ras_cas_delay = CFG_SDRAM_RAS_CAS_DELAY;
-
+
/* set SDRAM speed here */
-
- refresh_rate/=78;
+
+ refresh_rate/=78;
if (refresh_rate<=1) {
val = 0; /* 7.8us */
} else if (refresh_rate==2) {
@@ -164,22 +164,22 @@ unsigned long init_sc520_dram(void)
val = 3; /* 62.4us */
}
write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4));
-
+
val = read_mmcr_byte(SC520_DRCTMCTL);
val &= 0xf0;
-
- if (cas_precharge_delay==3) {
+
+ if (cas_precharge_delay==3) {
val |= 0x04; /* 3T */
- } else if (cas_precharge_delay==4) {
+ } else if (cas_precharge_delay==4) {
val |= 0x08; /* 4T */
- } else if (cas_precharge_delay>4) {
+ } else if (cas_precharge_delay>4) {
val |= 0x0c;
- }
-
+ }
+
if (ras_cas_delay > 3) {
- val |= 2;
+ val |= 2;
} else {
- val |= 1;
+ val |= 1;
}
write_mmcr_byte(SC520_DRCTMCTL, val);
@@ -187,37 +187,37 @@ unsigned long init_sc520_dram(void)
/* We read-back the configuration of the dram
* controller that the assembly code wrote */
dram_ctrl = read_mmcr_long(SC520_DRCBENDADR);
-
+
bd->bi_dram[0].start = 0;
if (dram_ctrl & 0x80) {
/* bank 0 enabled */
dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
- bd->bi_dram[0].size = bd->bi_dram[1].start;
+ bd->bi_dram[0].size = bd->bi_dram[1].start;
} else {
bd->bi_dram[0].size = 0;
bd->bi_dram[1].start = bd->bi_dram[0].start;
}
-
+
if (dram_ctrl & 0x8000) {
/* bank 1 enabled */
dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
- bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start;
+ bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start;
} else {
bd->bi_dram[1].size = 0;
bd->bi_dram[2].start = bd->bi_dram[1].start;
}
-
+
if (dram_ctrl & 0x800000) {
/* bank 2 enabled */
dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
- bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start;
+ bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start;
} else {
bd->bi_dram[2].size = 0;
bd->bi_dram[3].start = bd->bi_dram[2].start;
- }
-
+ }
+
if (dram_ctrl & 0x80000000) {
/* bank 3 enabled */
dram_present = (dram_ctrl & 0x7f000000) >> 2;
@@ -226,12 +226,12 @@ unsigned long init_sc520_dram(void)
bd->bi_dram[3].size = 0;
}
-
-#if 0
+
+#if 0
printf("Configured %d bytes of dram\n", dram_present);
-#endif
+#endif
gd->ram_size = dram_present;
-
+
return dram_present;
}
@@ -265,19 +265,19 @@ static struct {
/* The interrupt used for PCI INTA-INTD */
-int sc520_pci_ints[15] = {
+int sc520_pci_ints[15] = {
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1
};
/* utility function to configure a pci interrupt */
-int pci_sc520_set_irq(int pci_pin, int irq)
+int pci_sc520_set_irq(int pci_pin, int irq)
{
int i;
-
+
# if 0
printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
-#endif
+#endif
if (irq < 0 || irq > 15) {
return -1; /* illegal irq */
}
@@ -286,7 +286,7 @@ int pci_sc520_set_irq(int pci_pin, int irq)
return -1; /* illegal pci int pin */
}
- /* first disable any non-pci interrupt source that use
+ /* first disable any non-pci interrupt source that use
* this level */
for (i=SC520_GPTMR0MAP;i<=SC520_GP10IMAP;i++) {
if (i>=SC520_PCIINTAMAP&&i<=SC520_PCIINTDMAP) {
@@ -296,31 +296,31 @@ int pci_sc520_set_irq(int pci_pin, int irq)
write_mmcr_byte(i, SC520_IRQ_DISABLED);
}
}
-
+
/* Set the trigger to level */
- write_mmcr_byte(sc520_irq[irq].level_reg,
+ write_mmcr_byte(sc520_irq[irq].level_reg,
read_mmcr_byte(sc520_irq[irq].level_reg) | sc520_irq[irq].level_bit);
-
-
+
+
if (pci_pin < 4) {
/* PCI INTA-INTD */
/* route the interrupt */
write_mmcr_byte(SC520_PCIINTAMAP + pci_pin, sc520_irq[irq].priority);
-
-
+
+
} else {
/* GPIRQ0-GPIRQ10 used for additional PCI INTS */
write_mmcr_byte(SC520_GP0IMAP + pci_pin - 4, sc520_irq[irq].priority);
-
+
/* also set the polarity in this case */
- write_mmcr_word(SC520_INTPINPOL,
+ write_mmcr_word(SC520_INTPINPOL,
read_mmcr_word(SC520_INTPINPOL) | (1 << (pci_pin-4)));
-
+
}
-
- /* register the pin */
+
+ /* register the pin */
sc520_pci_ints[pci_pin] = irq;
-
+
return 0; /* OK */
}
@@ -331,35 +331,35 @@ void pci_sc520_init(struct pci_controller *hose)
hose->last_busno = 0xff;
/* System memory space */
- pci_set_region(hose->regions + 0,
+ pci_set_region(hose->regions + 0,
SC520_PCI_MEMORY_BUS,
SC520_PCI_MEMORY_PHYS,
SC520_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* PCI memory space */
- pci_set_region(hose->regions + 1,
+ pci_set_region(hose->regions + 1,
SC520_PCI_MEM_BUS,
SC520_PCI_MEM_PHYS,
SC520_PCI_MEM_SIZE,
PCI_REGION_MEM);
/* ISA/PCI memory space */
- pci_set_region(hose->regions + 2,
+ pci_set_region(hose->regions + 2,
SC520_ISA_MEM_BUS,
SC520_ISA_MEM_PHYS,
SC520_ISA_MEM_SIZE,
PCI_REGION_MEM);
/* PCI I/O space */
- pci_set_region(hose->regions + 3,
+ pci_set_region(hose->regions + 3,
SC520_PCI_IO_BUS,
SC520_PCI_IO_PHYS,
SC520_PCI_IO_SIZE,
PCI_REGION_IO);
/* ISA/PCI I/O space */
- pci_set_region(hose->regions + 4,
+ pci_set_region(hose->regions + 4,
SC520_ISA_IO_BUS,
SC520_ISA_IO_PHYS,
SC520_ISA_IO_SIZE,
@@ -374,15 +374,14 @@ void pci_sc520_init(struct pci_controller *hose)
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
-
+
/* enable target memory acceses on host brige */
- pci_write_config_word(0, PCI_COMMAND,
+ pci_write_config_word(0, PCI_COMMAND,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
}
-
#endif
#ifdef CFG_TIMER_SC520
@@ -392,7 +391,7 @@ void reset_timer(void)
{
write_mmcr_word(SC520_GPTMR0CNT, 0);
write_mmcr_word(SC520_GPTMR0CTL, 0x6001);
-
+
}
ulong get_timer(ulong base)
@@ -414,19 +413,19 @@ void udelay(unsigned long usec)
{
int m=0;
long u;
-
+
read_mmcr_word(SC520_SWTMRMILLI);
read_mmcr_word(SC520_SWTMRMICRO);
-
+
#if 0
/* do not enable this line, udelay is used in the serial driver -> recursion */
printf("udelay: %ld m.u %d.%d tm.tu %d.%d\n", usec, m, u, tm, tu);
-#endif
+#endif
while (1) {
-
+
m += read_mmcr_word(SC520_SWTMRMILLI);
u = read_mmcr_word(SC520_SWTMRMICRO) + (m * 1000);
-
+
if (usec <= u) {
break;
}
@@ -440,13 +439,13 @@ int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
u8 temp=0;
if (freq >= 8192) {
- temp |= CTL_CLK_SEL_4;
+ temp |= CTL_CLK_SEL_4;
} else if (freq >= 4096) {
- temp |= CTL_CLK_SEL_8;
+ temp |= CTL_CLK_SEL_8;
} else if (freq >= 2048) {
- temp |= CTL_CLK_SEL_16;
+ temp |= CTL_CLK_SEL_16;
} else if (freq >= 1024) {
- temp |= CTL_CLK_SEL_32;
+ temp |= CTL_CLK_SEL_32;
} else if (freq >= 512) {
temp |= CTL_CLK_SEL_64;
} else if (freq >= 256) {
@@ -456,47 +455,47 @@ int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
} else {
temp |= CTL_CLK_SEL_512;
}
-
+
if (!lsb_first) {
temp |= MSBF_ENB;
}
-
+
if (inv_clock) {
temp |= CLK_INV_ENB;
}
-
+
if (inv_phase) {
temp |= PHS_INV_ENB;
}
-
+
write_mmcr_byte(SC520_SSICTL, temp);
-
+
return 0;
}
-u8 ssi_txrx_byte(u8 data)
+u8 ssi_txrx_byte(u8 data)
{
write_mmcr_byte(SC520_SSIXMIT, data);
while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMITRCV);
while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
- return read_mmcr_byte(SC520_SSIRCV);
-}
+ return read_mmcr_byte(SC520_SSIRCV);
+}
-void ssi_tx_byte(u8 data)
+void ssi_tx_byte(u8 data)
{
write_mmcr_byte(SC520_SSIXMIT, data);
- while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
+ while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMIT);
}
-u8 ssi_rx_byte(void)
+u8 ssi_rx_byte(void)
{
while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_RCV);
while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
return read_mmcr_byte(SC520_SSIRCV);
-}
+}
#endif /* CONFIG_SC520 */