diff options
Diffstat (limited to 'cpu/i386/sc520.c')
| -rw-r--r-- | cpu/i386/sc520.c | 18 |
1 files changed, 14 insertions, 4 deletions
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c index c83f0bb..1c4370b 100644 --- a/cpu/i386/sc520.c +++ b/cpu/i386/sc520.c @@ -31,7 +31,9 @@ #include <common.h> #include <config.h> #include <pci.h> +#ifdef CONFIG_SC520_SSI #include <ssi.h> +#endif #include <asm/io.h> #include <asm/pci.h> #include <asm/ic/sc520.h> @@ -143,7 +145,15 @@ unsigned long init_sc520_dram(void) u32 dram_present=0; u32 dram_ctrl; - +#ifdef CFG_SDRAM_DRCTMCTL + /* these memory control registers are set up in the assember part, + * in sc520_asm.S, during 'mem_init'. If we muck with them here, + * after we are running a stack in RAM, we have troubles. Besides, + * these refresh and delay values are better ? simply specified + * outright in the include/configs/{cfg} file since the HW designer + * simply dictates it. + */ +#else int val; int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY; @@ -162,6 +172,7 @@ unsigned long init_sc520_dram(void) } else { val = 3; /* 62.4us */ } + write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4)); val = read_mmcr_byte(SC520_DRCTMCTL); @@ -181,13 +192,12 @@ unsigned long init_sc520_dram(void) val |= 1; } write_mmcr_byte(SC520_DRCTMCTL, val); - +#endif /* We read-back the configuration of the dram * controller that the assembly code wrote */ dram_ctrl = read_mmcr_long(SC520_DRCBENDADR); - bd->bi_dram[0].start = 0; if (dram_ctrl & 0x80) { /* bank 0 enabled */ @@ -274,7 +284,7 @@ int pci_sc520_set_irq(int pci_pin, int irq) { int i; -# if 0 +# if 1 printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq); #endif if (irq < 0 || irq > 15) { |