diff options
Diffstat (limited to 'cpu/blackfin')
| -rw-r--r-- | cpu/blackfin/initcode.c | 221 |
1 files changed, 169 insertions, 52 deletions
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index a039cbb..bb58898 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -9,6 +9,8 @@ * Licensed under the GPL-2 or later. */ +#define BFIN_IN_INITCODE + #include <config.h> #include <asm/blackfin.h> #include <asm/mach-common/bits/bootrom.h> @@ -17,7 +19,6 @@ #include <asm/mach-common/bits/pll.h> #include <asm/mach-common/bits/uart.h> -#define BFIN_IN_INITCODE #include "serial.h" __attribute__((always_inline)) @@ -213,6 +214,7 @@ static inline void serial_putc(char c) # define CONFIG_HAS_VR 1 #endif +#if CONFIG_MEM_SIZE #ifndef EBIU_RSTCTL /* Blackfin with SDRAM */ #ifndef CONFIG_EBIU_SDBCTL_VAL @@ -245,6 +247,7 @@ static inline void serial_putc(char c) # define CONFIG_EBIU_SDBCTL_VAL (CONFIG_EBCAW_VAL | CONFIG_EBSZ_VAL | EBE) #endif #endif +#endif /* Conflicting Column Address Widths Causes SDRAM Errors: * EB2CAW and EB3CAW must be the same @@ -255,28 +258,21 @@ static inline void serial_putc(char c) # endif #endif -BOOTROM_CALLED_FUNC_ATTR -void initcode(ADI_BOOT_DATA *bootstruct) +__attribute__((always_inline)) static inline void +program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) { - ADI_BOOT_DATA bootstruct_scratch; + serial_putc('a'); /* Save the clock pieces that are used in baud rate calculation */ - unsigned int sdivB, divB, vcoB; - serial_init(); if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { - sdivB = bfin_read_PLL_DIV() & 0xf; - vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f; - divB = serial_early_get_div(); + serial_putc('b'); + *sdivB = bfin_read_PLL_DIV() & 0xf; + *vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f; + *divB = serial_early_get_div(); + serial_putc('c'); } - serial_putc('A'); - - /* If the bootstruct is NULL, then it's because we're loading - * dynamically and not via LDR (bootrom). So set the struct to - * some scratch space. - */ - if (!bootstruct) - bootstruct = &bootstruct_scratch; + serial_putc('d'); #ifdef CONFIG_HW_WATCHDOG # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE @@ -289,41 +285,69 @@ void initcode(ADI_BOOT_DATA *bootstruct) * timeout, so don't clobber that. */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { + serial_putc('e'); bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); bfin_write_WDOG_CTL(0); + serial_putc('f'); } #endif - serial_putc('B'); + serial_putc('g'); + + /* Blackfin bootroms use the SPI slow read opcode instead of the SPI + * fast read, so we need to slow down the SPI clock a lot more during + * boot. Once we switch over to u-boot's SPI flash driver, we'll + * increase the speed appropriately. + */ + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) { + serial_putc('h'); + if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4) + bs->dFlags |= BFLAG_FASTREAD; + bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); + serial_putc('i'); + } + + serial_putc('j'); +} + +__attribute__((always_inline)) static inline bool +maybe_self_refresh(ADI_BOOT_DATA *bs) +{ + serial_putc('a'); + + if (!CONFIG_MEM_SIZE) + return false; /* If external memory is enabled, put it into self refresh first. */ - bool put_into_srfs = false; #ifdef EBIU_RSTCTL if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) { + serial_putc('b'); bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ); - put_into_srfs = true; + return true; } #else if (bfin_read_EBIU_SDBCTL() & EBE) { + serial_putc('b'); bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS); - put_into_srfs = true; + return true; } #endif - serial_putc('C'); + serial_putc('c'); - /* Blackfin bootroms use the SPI slow read opcode instead of the SPI - * fast read, so we need to slow down the SPI clock a lot more during - * boot. Once we switch over to u-boot's SPI flash driver, we'll - * increase the speed appropriately. - */ - if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) { - if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4) - bootstruct->dFlags |= BFLAG_FASTREAD; - bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); - } + return false; +} - serial_putc('D'); +__attribute__((always_inline)) static inline u16 +program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) +{ + u16 vr_ctl; + + serial_putc('a'); + + vr_ctl = bfin_read_VR_CTL(); + + serial_putc('b'); /* If we're entering self refresh, make sure it has happened. */ if (put_into_srfs) @@ -334,15 +358,14 @@ void initcode(ADI_BOOT_DATA *bootstruct) #endif continue; - serial_putc('E'); + serial_putc('c'); /* With newer bootroms, we use the helper function to set up * the memory controller. Older bootroms lacks such helpers * so we do it ourselves. */ - uint16_t vr_ctl = bfin_read_VR_CTL(); if (!ANOMALY_05000386) { - serial_putc('F'); + serial_putc('d'); /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */ ADI_SYSCTRL_VALUES memory_settings; @@ -362,7 +385,9 @@ void initcode(ADI_BOOT_DATA *bootstruct) #if ANOMALY_05000432 bfin_write_SIC_IWR1(0); #endif + serial_putc('e'); bfrom_SysControl(actions, &memory_settings, NULL); + serial_putc('f'); #if ANOMALY_05000432 bfin_write_SIC_IWR1(-1); #endif @@ -370,8 +395,9 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_SICA_IWR0(-1); bfin_write_SICA_IWR1(-1); #endif + serial_putc('g'); } else { - serial_putc('G'); + serial_putc('h'); /* Disable all peripheral wakeups except for the PLL event. */ #ifdef SIC_IWR0 @@ -387,38 +413,40 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_SIC_IWR(1); #endif - serial_putc('H'); + serial_putc('i'); /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */ bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); - serial_putc('I'); + serial_putc('j'); /* Only reprogram when needed to avoid triggering unnecessary * PLL relock sequences. */ if (vr_ctl != CONFIG_VR_CTL_VAL) { - serial_putc('!'); + serial_putc('?'); bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); asm("idle;"); + serial_putc('!'); } - serial_putc('J'); + serial_putc('k'); bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); - serial_putc('K'); + serial_putc('l'); /* Only reprogram when needed to avoid triggering unnecessary * PLL relock sequences. */ if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { - serial_putc('!'); + serial_putc('?'); bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); asm("idle;"); + serial_putc('!'); } - serial_putc('L'); + serial_putc('m'); /* Restore all peripheral wakeups. */ #ifdef SIC_IWR0 @@ -433,9 +461,19 @@ void initcode(ADI_BOOT_DATA *bootstruct) #else bfin_write_SIC_IWR(-1); #endif + + serial_putc('n'); } - serial_putc('M'); + serial_putc('o'); + + return vr_ctl; +} + +__attribute__((always_inline)) static inline void +update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB) +{ + serial_putc('a'); /* Since we've changed the SCLK above, we may need to update * the UART divisors (UART baud rates are based on SCLK). @@ -443,6 +481,7 @@ void initcode(ADI_BOOT_DATA *bootstruct) * for dividing which means we'd generate a libgcc reference. */ if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { + serial_putc('b'); unsigned int sdivR, vcoR; sdivR = bfin_read_PLL_DIV() & 0xf; vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; @@ -452,20 +491,38 @@ void initcode(ADI_BOOT_DATA *bootstruct) for (quotient = 0; dividend > 0; ++quotient) dividend -= divisor; serial_early_put_div(quotient - ANOMALY_05000230); + serial_putc('c'); } - serial_putc('N'); + serial_putc('d'); +} + +__attribute__((always_inline)) static inline void +program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) +{ + serial_putc('a'); + + if (!CONFIG_MEM_SIZE) + return; + + serial_putc('b'); /* Program the external memory controller before we come out of * self-refresh. This only works with our SDRAM controller. */ #ifndef EBIU_RSTCTL +# ifdef CONFIG_EBIU_SDRRC_VAL bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); +# endif +# ifdef CONFIG_EBIU_SDBCTL_VAL bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL); +# endif +# ifdef CONFIG_EBIU_SDGCTL_VAL bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL); +# endif #endif - serial_putc('O'); + serial_putc('c'); /* Now that we've reprogrammed, take things out of self refresh. */ if (put_into_srfs) @@ -475,7 +532,7 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS)); #endif - serial_putc('P'); + serial_putc('d'); /* Our DDR controller sucks and cannot be programmed while in * self-refresh. So we have to pull it out before programming. @@ -494,7 +551,18 @@ void initcode(ADI_BOOT_DATA *bootstruct) # endif #endif - serial_putc('Q'); + serial_putc('e'); +} + +__attribute__((always_inline)) static inline void +check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) +{ + serial_putc('a'); + + if (!CONFIG_MEM_SIZE) + return; + + serial_putc('b'); /* Are we coming out of hibernate (suspend to memory) ? * The memory layout is: @@ -508,7 +576,7 @@ void initcode(ADI_BOOT_DATA *bootstruct) uint32_t *hibernate_magic = 0; __builtin_bfin_ssync(); /* make sure memory controller is done */ if (hibernate_magic[0] == 0xDEADBEEF) { - serial_putc('R'); + serial_putc('c'); bfin_write_EVT15(hibernate_magic[1]); bfin_write_IMASK(EVT_IVG15); __asm__ __volatile__ ( @@ -525,15 +593,24 @@ void initcode(ADI_BOOT_DATA *bootstruct) : "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */) ); } + serial_putc('d'); } - serial_putc('S'); + serial_putc('e'); +} + +__attribute__((always_inline)) static inline void +program_async_controller(ADI_BOOT_DATA *bs) +{ + serial_putc('a'); /* Program the async banks controller. */ bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); + serial_putc('b'); + #ifdef EBIU_MODE /* Not all parts have these additional MMRs. */ bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); @@ -541,9 +618,49 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); #endif - serial_putc('T'); + serial_putc('c'); +} + +BOOTROM_CALLED_FUNC_ATTR +void initcode(ADI_BOOT_DATA *bs) +{ + ADI_BOOT_DATA bootstruct_scratch; + + serial_init(); + + serial_putc('A'); + + /* If the bootstruct is NULL, then it's because we're loading + * dynamically and not via LDR (bootrom). So set the struct to + * some scratch space. + */ + if (!bs) + bs = &bootstruct_scratch; + + serial_putc('B'); + bool put_into_srfs = maybe_self_refresh(bs); + + serial_putc('C'); + uint sdivB, divB, vcoB; + program_early_devices(bs, &sdivB, &divB, &vcoB); + + serial_putc('D'); + u16 vr_ctl = program_clocks(bs, put_into_srfs); + + serial_putc('E'); + update_serial_clocks(bs, sdivB, divB, vcoB); + + serial_putc('F'); + program_memory_controller(bs, put_into_srfs); + + serial_putc('G'); + check_hibernation(bs, vr_ctl, put_into_srfs); + + serial_putc('H'); + program_async_controller(bs); #ifdef CONFIG_BFIN_BOOTROM_USES_EVT1 + serial_putc('I'); /* tell the bootrom where our entry point is */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE); |