summaryrefslogtreecommitdiff
path: root/cpu/blackfin/initcode.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/blackfin/initcode.c')
-rw-r--r--cpu/blackfin/initcode.c687
1 files changed, 0 insertions, 687 deletions
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
deleted file mode 100644
index 5f80ad6..0000000
--- a/cpu/blackfin/initcode.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * initcode.c - Initialize the processor. This is usually entails things
- * like external memory, voltage regulators, etc... Note that this file
- * cannot make any function calls as it may be executed all by itself by
- * the Blackfin's bootrom in LDR format.
- *
- * Copyright (c) 2004-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define BFIN_IN_INITCODE
-
-#include <config.h>
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/bootrom.h>
-#include <asm/mach-common/bits/core.h>
-#include <asm/mach-common/bits/ebiu.h>
-#include <asm/mach-common/bits/pll.h>
-#include <asm/mach-common/bits/uart.h>
-
-#include "serial.h"
-
-__attribute__((always_inline))
-static inline void serial_init(void)
-{
-#ifdef __ADSPBF54x__
-# ifdef BFIN_BOOT_UART_USE_RTS
-# define BFIN_UART_USE_RTS 1
-# else
-# define BFIN_UART_USE_RTS 0
-# endif
- if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
- size_t i;
-
- /* force RTS rather than relying on auto RTS */
- bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) | FCPOL);
-
- /* Wait for the line to clear up. We cannot rely on UART
- * registers as none of them reflect the status of the RSR.
- * Instead, we'll sleep for ~10 bit times at 9600 baud.
- * We can precalc things here by assuming boot values for
- * PLL rather than loading registers and calculating.
- * baud = SCLK / (16 ^ (1 - EDBO) * Divisor)
- * EDB0 = 0
- * Divisor = (SCLK / baud) / 16
- * SCLK = baud * 16 * Divisor
- * SCLK = (0x14 * CONFIG_CLKIN_HZ) / 5
- * CCLK = (16 * Divisor * 5) * (9600 / 10)
- * In reality, this will probably be just about 1 second delay,
- * so assuming 9600 baud is OK (both as a very low and too high
- * speed as this will buffer things enough).
- */
-#define _NUMBITS (10) /* how many bits to delay */
-#define _LOWBAUD (9600) /* low baud rate */
-#define _SCLK ((0x14 * CONFIG_CLKIN_HZ) / 5) /* SCLK based on PLL */
-#define _DIVISOR ((_SCLK / _LOWBAUD) / 16) /* UART DLL/DLH */
-#define _NUMINS (3) /* how many instructions in loop */
-#define _CCLK (((16 * _DIVISOR * 5) * (_LOWBAUD / _NUMBITS)) / _NUMINS)
- i = _CCLK;
- while (i--)
- asm volatile("" : : : "memory");
- }
-#endif
-
- if (BFIN_DEBUG_EARLY_SERIAL) {
- int ucen = bfin_read16(&pUART->gctl) & UCEN;
- serial_early_init();
-
- /* If the UART is off, that means we need to program
- * the baud rate ourselves initially.
- */
- if (ucen != UCEN)
- serial_early_set_baud(CONFIG_BAUDRATE);
- }
-}
-
-__attribute__((always_inline))
-static inline void serial_deinit(void)
-{
-#ifdef __ADSPBF54x__
- if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
- /* clear forced RTS rather than relying on auto RTS */
- bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL);
- }
-#endif
-}
-
-__attribute__((always_inline))
-static inline void serial_putc(char c)
-{
- if (!BFIN_DEBUG_EARLY_SERIAL)
- return;
-
- if (c == '\n')
- serial_putc('\r');
-
- bfin_write16(&pUART->thr, c);
-
- while (!(bfin_read16(&pUART->lsr) & TEMT))
- continue;
-}
-
-
-/* Max SCLK can be 133MHz ... dividing that by (2*4) gives
- * us a freq of 16MHz for SPI which should generally be
- * slow enough for the slow reads the bootrom uses.
- */
-#if !defined(CONFIG_SPI_FLASH_SLOW_READ) && \
- ((defined(__ADSPBF52x__) && __SILICON_REVISION__ >= 2) || \
- (defined(__ADSPBF54x__) && __SILICON_REVISION__ >= 1))
-# define BOOTROM_SUPPORTS_SPI_FAST_READ 1
-#else
-# define BOOTROM_SUPPORTS_SPI_FAST_READ 0
-#endif
-#ifndef CONFIG_SPI_BAUD_INITBLOCK
-# define CONFIG_SPI_BAUD_INITBLOCK (BOOTROM_SUPPORTS_SPI_FAST_READ ? 2 : 4)
-#endif
-#ifdef SPI0_BAUD
-# define bfin_write_SPI_BAUD bfin_write_SPI0_BAUD
-#endif
-
-/* PLL_DIV defines */
-#ifndef CONFIG_PLL_DIV_VAL
-# if (CONFIG_CCLK_DIV == 1)
-# define CONFIG_CCLK_ACT_DIV CCLK_DIV1
-# elif (CONFIG_CCLK_DIV == 2)
-# define CONFIG_CCLK_ACT_DIV CCLK_DIV2
-# elif (CONFIG_CCLK_DIV == 4)
-# define CONFIG_CCLK_ACT_DIV CCLK_DIV4
-# elif (CONFIG_CCLK_DIV == 8)
-# define CONFIG_CCLK_ACT_DIV CCLK_DIV8
-# else
-# define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
-# endif
-# define CONFIG_PLL_DIV_VAL (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV)
-#endif
-
-#ifndef CONFIG_PLL_LOCKCNT_VAL
-# define CONFIG_PLL_LOCKCNT_VAL 0x0300
-#endif
-
-#ifndef CONFIG_PLL_CTL_VAL
-# define CONFIG_PLL_CTL_VAL (SPORT_HYST | (CONFIG_VCO_MULT << 9) | CONFIG_CLKIN_HALF)
-#endif
-
-#ifndef CONFIG_EBIU_RSTCTL_VAL
-# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */
-#endif
-#if ((CONFIG_EBIU_RSTCTL_VAL & 0xFFFFFFC4) != 0)
-# error invalid EBIU_RSTCTL value: must not set reserved bits
-#endif
-
-#ifndef CONFIG_EBIU_MBSCTL_VAL
-# define CONFIG_EBIU_MBSCTL_VAL 0
-#endif
-
-#if defined(CONFIG_EBIU_DDRQUE_VAL) && ((CONFIG_EBIU_DDRQUE_VAL & 0xFFFF8000) != 0)
-# error invalid EBIU_DDRQUE value: must not set reserved bits
-#endif
-
-/* Make sure our voltage value is sane so we don't blow up! */
-#ifndef CONFIG_VR_CTL_VAL
-# define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV)
-# if defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__)
-# define CCLK_VLEV_120 400000000
-# define CCLK_VLEV_125 533000000
-# elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
-# define CCLK_VLEV_120 401000000
-# define CCLK_VLEV_125 401000000
-# elif defined(__ADSPBF561__)
-# define CCLK_VLEV_120 300000000
-# define CCLK_VLEV_125 501000000
-# endif
-# if BFIN_CCLK < CCLK_VLEV_120
-# define CONFIG_VR_CTL_VLEV VLEV_120
-# elif BFIN_CCLK < CCLK_VLEV_125
-# define CONFIG_VR_CTL_VLEV VLEV_125
-# else
-# define CONFIG_VR_CTL_VLEV VLEV_130
-# endif
-# if defined(__ADSPBF52x__) /* TBD; use default */
-# undef CONFIG_VR_CTL_VLEV
-# define CONFIG_VR_CTL_VLEV VLEV_110
-# elif defined(__ADSPBF54x__) /* TBD; use default */
-# undef CONFIG_VR_CTL_VLEV
-# define CONFIG_VR_CTL_VLEV VLEV_120
-# elif defined(__ADSPBF538__) || defined(__ADSPBF539__) /* TBD; use default */
-# undef CONFIG_VR_CTL_VLEV
-# define CONFIG_VR_CTL_VLEV VLEV_125
-# endif
-
-# ifdef CONFIG_BFIN_MAC
-# define CONFIG_VR_CTL_CLKBUF CLKBUFOE
-# else
-# define CONFIG_VR_CTL_CLKBUF 0
-# endif
-
-# if defined(__ADSPBF52x__)
-# define CONFIG_VR_CTL_FREQ FREQ_1000
-# else
-# define CONFIG_VR_CTL_FREQ (GAIN_20 | FREQ_1000)
-# endif
-
-# define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ)
-#endif
-
-/* some parts do not have an on-chip voltage regulator */
-#if defined(__ADSPBF51x__)
-# define CONFIG_HAS_VR 0
-# undef CONFIG_VR_CTL_VAL
-# define CONFIG_VR_CTL_VAL 0
-#else
-# define CONFIG_HAS_VR 1
-#endif
-
-#if CONFIG_MEM_SIZE
-#ifndef EBIU_RSTCTL
-/* Blackfin with SDRAM */
-#ifndef CONFIG_EBIU_SDBCTL_VAL
-# if CONFIG_MEM_SIZE == 16
-# define CONFIG_EBSZ_VAL EBSZ_16
-# elif CONFIG_MEM_SIZE == 32
-# define CONFIG_EBSZ_VAL EBSZ_32
-# elif CONFIG_MEM_SIZE == 64
-# define CONFIG_EBSZ_VAL EBSZ_64
-# elif CONFIG_MEM_SIZE == 128
-# define CONFIG_EBSZ_VAL EBSZ_128
-# elif CONFIG_MEM_SIZE == 256
-# define CONFIG_EBSZ_VAL EBSZ_256
-# elif CONFIG_MEM_SIZE == 512
-# define CONFIG_EBSZ_VAL EBSZ_512
-# else
-# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_SIZE
-# endif
-# if CONFIG_MEM_ADD_WDTH == 8
-# define CONFIG_EBCAW_VAL EBCAW_8
-# elif CONFIG_MEM_ADD_WDTH == 9
-# define CONFIG_EBCAW_VAL EBCAW_9
-# elif CONFIG_MEM_ADD_WDTH == 10
-# define CONFIG_EBCAW_VAL EBCAW_10
-# elif CONFIG_MEM_ADD_WDTH == 11
-# define CONFIG_EBCAW_VAL EBCAW_11
-# else
-# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_ADD_WDTH
-# endif
-# define CONFIG_EBIU_SDBCTL_VAL (CONFIG_EBCAW_VAL | CONFIG_EBSZ_VAL | EBE)
-#endif
-#endif
-#endif
-
-/* Conflicting Column Address Widths Causes SDRAM Errors:
- * EB2CAW and EB3CAW must be the same
- */
-#if ANOMALY_05000362
-# if ((CONFIG_EBIU_SDBCTL_VAL & 0x30000000) >> 8) != (CONFIG_EBIU_SDBCTL_VAL & 0x00300000)
-# error "Anomaly 05000362: EB2CAW and EB3CAW must be the same"
-# endif
-#endif
-
-__attribute__((always_inline)) static inline void
-program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB)
-{
- serial_putc('a');
-
- /* Save the clock pieces that are used in baud rate calculation */
- if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
- serial_putc('b');
- *sdivB = bfin_read_PLL_DIV() & 0xf;
- *vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f;
- *divB = serial_early_get_div();
- serial_putc('c');
- }
-
- serial_putc('d');
-
-#ifdef CONFIG_HW_WATCHDOG
-# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE
-# define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000
-# endif
- /* Program the watchdog with an initial timeout of ~20 seconds.
- * Hopefully that should be long enough to load the u-boot LDR
- * (from wherever) and then the common u-boot code can take over.
- * In bypass mode, the start.S would have already set a much lower
- * timeout, so don't clobber that.
- */
- if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) {
- serial_putc('e');
- bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE));
- bfin_write_WDOG_CTL(0);
- serial_putc('f');
- }
-#endif
-
- serial_putc('g');
-
- /* Blackfin bootroms use the SPI slow read opcode instead of the SPI
- * fast read, so we need to slow down the SPI clock a lot more during
- * boot. Once we switch over to u-boot's SPI flash driver, we'll
- * increase the speed appropriately.
- */
- if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
- serial_putc('h');
- if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4)
- bs->dFlags |= BFLAG_FASTREAD;
- bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK);
- serial_putc('i');
- }
-
- serial_putc('j');
-}
-
-__attribute__((always_inline)) static inline bool
-maybe_self_refresh(ADI_BOOT_DATA *bs)
-{
- serial_putc('a');
-
- if (!CONFIG_MEM_SIZE)
- return false;
-
- /* If external memory is enabled, put it into self refresh first. */
-#ifdef EBIU_RSTCTL
- if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) {
- serial_putc('b');
- bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ);
- return true;
- }
-#else
- if (bfin_read_EBIU_SDBCTL() & EBE) {
- serial_putc('b');
- bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
- return true;
- }
-#endif
-
- serial_putc('c');
-
- return false;
-}
-
-__attribute__((always_inline)) static inline u16
-program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs)
-{
- u16 vr_ctl;
-
- serial_putc('a');
-
- vr_ctl = bfin_read_VR_CTL();
-
- serial_putc('b');
-
- /* If we're entering self refresh, make sure it has happened. */
- if (put_into_srfs)
-#ifdef EBIU_RSTCTL
- while (!(bfin_read_EBIU_RSTCTL() & SRACK))
-#else
- while (!(bfin_read_EBIU_SDSTAT() & SDSRA))
-#endif
- continue;
-
- serial_putc('c');
-
- /* With newer bootroms, we use the helper function to set up
- * the memory controller. Older bootroms lacks such helpers
- * so we do it ourselves.
- */
- if (!ANOMALY_05000386) {
- serial_putc('d');
-
- /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
- ADI_SYSCTRL_VALUES memory_settings;
- uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT;
- if (CONFIG_HAS_VR) {
- actions |= SYSCTRL_VRCTL;
- if (CONFIG_VR_CTL_VAL & FREQ_MASK)
- actions |= SYSCTRL_INTVOLTAGE;
- else
- actions |= SYSCTRL_EXTVOLTAGE;
- memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL;
- } else
- actions |= SYSCTRL_EXTVOLTAGE;
- memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL;
- memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL;
- memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL;
-#if ANOMALY_05000432
- bfin_write_SIC_IWR1(0);
-#endif
- serial_putc('e');
- bfrom_SysControl(actions, &memory_settings, NULL);
- serial_putc('f');
-#if ANOMALY_05000432
- bfin_write_SIC_IWR1(-1);
-#endif
-#if ANOMALY_05000171
- bfin_write_SICA_IWR0(-1);
- bfin_write_SICA_IWR1(-1);
-#endif
- serial_putc('g');
- } else {
- serial_putc('h');
-
- /* Disable all peripheral wakeups except for the PLL event. */
-#ifdef SIC_IWR0
- bfin_write_SIC_IWR0(1);
- bfin_write_SIC_IWR1(0);
-# ifdef SIC_IWR2
- bfin_write_SIC_IWR2(0);
-# endif
-#elif defined(SICA_IWR0)
- bfin_write_SICA_IWR0(1);
- bfin_write_SICA_IWR1(0);
-#else
- bfin_write_SIC_IWR(1);
-#endif
-
- serial_putc('i');
-
- /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
- bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
-
- serial_putc('j');
-
- /* Only reprogram when needed to avoid triggering unnecessary
- * PLL relock sequences.
- */
- if (vr_ctl != CONFIG_VR_CTL_VAL) {
- serial_putc('?');
- bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
- asm("idle;");
- serial_putc('!');
- }
-
- serial_putc('k');
-
- bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
-
- serial_putc('l');
-
- /* Only reprogram when needed to avoid triggering unnecessary
- * PLL relock sequences.
- */
- if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
- serial_putc('?');
- bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
- asm("idle;");
- serial_putc('!');
- }
-
- serial_putc('m');
-
- /* Restore all peripheral wakeups. */
-#ifdef SIC_IWR0
- bfin_write_SIC_IWR0(-1);
- bfin_write_SIC_IWR1(-1);
-# ifdef SIC_IWR2
- bfin_write_SIC_IWR2(-1);
-# endif
-#elif defined(SICA_IWR0)
- bfin_write_SICA_IWR0(-1);
- bfin_write_SICA_IWR1(-1);
-#else
- bfin_write_SIC_IWR(-1);
-#endif
-
- serial_putc('n');
- }
-
- serial_putc('o');
-
- return vr_ctl;
-}
-
-__attribute__((always_inline)) static inline void
-update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB)
-{
- serial_putc('a');
-
- /* Since we've changed the SCLK above, we may need to update
- * the UART divisors (UART baud rates are based on SCLK).
- * Do the division by hand as there are no native instructions
- * for dividing which means we'd generate a libgcc reference.
- */
- if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
- serial_putc('b');
- unsigned int sdivR, vcoR;
- sdivR = bfin_read_PLL_DIV() & 0xf;
- vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f;
- int dividend = sdivB * divB * vcoR;
- int divisor = vcoB * sdivR;
- unsigned int quotient;
- for (quotient = 0; dividend > 0; ++quotient)
- dividend -= divisor;
- serial_early_put_div(quotient - ANOMALY_05000230);
- serial_putc('c');
- }
-
- serial_putc('d');
-}
-
-__attribute__((always_inline)) static inline void
-program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs)
-{
- serial_putc('a');
-
- if (!CONFIG_MEM_SIZE)
- return;
-
- serial_putc('b');
-
- /* Program the external memory controller before we come out of
- * self-refresh. This only works with our SDRAM controller.
- */
-#ifndef EBIU_RSTCTL
-# ifdef CONFIG_EBIU_SDRRC_VAL
- bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL);
-# endif
-# ifdef CONFIG_EBIU_SDBCTL_VAL
- bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL);
-# endif
-# ifdef CONFIG_EBIU_SDGCTL_VAL
- bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL);
-# endif
-#endif
-
- serial_putc('c');
-
- /* Now that we've reprogrammed, take things out of self refresh. */
- if (put_into_srfs)
-#ifdef EBIU_RSTCTL
- bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
-#else
- bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS));
-#endif
-
- serial_putc('d');
-
- /* Our DDR controller sucks and cannot be programmed while in
- * self-refresh. So we have to pull it out before programming.
- */
-#ifdef EBIU_RSTCTL
-# ifdef CONFIG_EBIU_RSTCTL_VAL
- bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRCTL0_VAL
- bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRCTL1_VAL
- bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRCTL2_VAL
- bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRCTL3_VAL
- /* default is disable, so don't need to force this */
- bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL);
-# endif
-# ifdef CONFIG_EBIU_DDRQUE_VAL
- bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | CONFIG_EBIU_DDRQUE_VAL);
-# endif
-#endif
-
- serial_putc('e');
-}
-
-__attribute__((always_inline)) static inline void
-check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs)
-{
- serial_putc('a');
-
- if (!CONFIG_MEM_SIZE)
- return;
-
- serial_putc('b');
-
- /* Are we coming out of hibernate (suspend to memory) ?
- * The memory layout is:
- * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF)
- * 0x4: return address
- * 0x8: stack pointer
- *
- * SCKELOW is unreliable on older parts (anomaly 307)
- */
- if (ANOMALY_05000307 || vr_ctl & 0x8000) {
- uint32_t *hibernate_magic = 0;
- __builtin_bfin_ssync(); /* make sure memory controller is done */
- if (hibernate_magic[0] == 0xDEADBEEF) {
- serial_putc('c');
- bfin_write_EVT15(hibernate_magic[1]);
- bfin_write_IMASK(EVT_IVG15);
- __asm__ __volatile__ (
- /* load reti early to avoid anomaly 281 */
- "reti = %0;"
- /* clear hibernate magic */
- "[%0] = %1;"
- /* load stack pointer */
- "SP = [%0 + 8];"
- /* lower ourselves from reset ivg to ivg15 */
- "raise 15;"
- "rti;"
- :
- : "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */)
- );
- }
- serial_putc('d');
- }
-
- serial_putc('e');
-}
-
-__attribute__((always_inline)) static inline void
-program_async_controller(ADI_BOOT_DATA *bs)
-{
- serial_putc('a');
-
- /* Program the async banks controller. */
- bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL);
- bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL);
- bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
-
- serial_putc('b');
-
- /* Not all parts have these additional MMRs. */
-#ifdef EBIU_MODE
-# ifdef CONFIG_EBIU_MBSCTL_VAL
- bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL);
-# endif
-# ifdef CONFIG_EBIU_MODE_VAL
- bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL);
-# endif
-# ifdef CONFIG_EBIU_FCTL_VAL
- bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL);
-# endif
-#endif
-
- serial_putc('c');
-}
-
-BOOTROM_CALLED_FUNC_ATTR
-void initcode(ADI_BOOT_DATA *bs)
-{
- ADI_BOOT_DATA bootstruct_scratch;
-
- serial_init();
-
- serial_putc('A');
-
- /* If the bootstruct is NULL, then it's because we're loading
- * dynamically and not via LDR (bootrom). So set the struct to
- * some scratch space.
- */
- if (!bs)
- bs = &bootstruct_scratch;
-
- serial_putc('B');
- bool put_into_srfs = maybe_self_refresh(bs);
-
- serial_putc('C');
- uint sdivB, divB, vcoB;
- program_early_devices(bs, &sdivB, &divB, &vcoB);
-
- serial_putc('D');
- u16 vr_ctl = program_clocks(bs, put_into_srfs);
-
- serial_putc('E');
- update_serial_clocks(bs, sdivB, divB, vcoB);
-
- serial_putc('F');
- program_memory_controller(bs, put_into_srfs);
-
- serial_putc('G');
- check_hibernation(bs, vr_ctl, put_into_srfs);
-
- serial_putc('H');
- program_async_controller(bs);
-
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
- serial_putc('I');
- /* tell the bootrom where our entry point is */
- if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS)
- bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE);
-#endif
-
- serial_putc('>');
- serial_putc('\n');
-
- serial_deinit();
-}