diff options
Diffstat (limited to 'cpu/bf533')
| -rw-r--r-- | cpu/bf533/Makefile | 16 | ||||
| -rw-r--r-- | cpu/bf533/bf533_serial.h | 9 | ||||
| -rw-r--r-- | cpu/bf533/cache.S | 65 | ||||
| -rw-r--r-- | cpu/bf533/config.mk | 8 | ||||
| -rw-r--r-- | cpu/bf533/cplbhdlr.S | 193 | ||||
| -rw-r--r-- | cpu/bf533/cplbmgr.S | 601 | ||||
| -rw-r--r-- | cpu/bf533/cpu.c | 204 | ||||
| -rw-r--r-- | cpu/bf533/cpu.h | 21 | ||||
| -rw-r--r-- | cpu/bf533/flush.S | 41 | ||||
| -rw-r--r-- | cpu/bf533/init_sdram.S | 179 | ||||
| -rw-r--r-- | cpu/bf533/init_sdram_bootrom_initblock.S | 179 | ||||
| -rw-r--r-- | cpu/bf533/interrupt.S | 257 | ||||
| -rw-r--r-- | cpu/bf533/interrupts.c | 56 | ||||
| -rw-r--r-- | cpu/bf533/ints.c | 86 | ||||
| -rw-r--r-- | cpu/bf533/serial.c | 55 | ||||
| -rw-r--r-- | cpu/bf533/start.S | 255 | ||||
| -rw-r--r-- | cpu/bf533/start1.S | 10 | ||||
| -rw-r--r-- | cpu/bf533/traps.c | 202 | ||||
| -rw-r--r-- | cpu/bf533/video.c | 194 | ||||
| -rw-r--r-- | cpu/bf533/video.h | 25 |
20 files changed, 1198 insertions, 1458 deletions
diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile index 9f4a0d8..dd4f299 100644 --- a/cpu/bf533/Makefile +++ b/cpu/bf533/Makefile @@ -1,6 +1,6 @@ # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,22 +20,24 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = start.o start1.o interrupt.o cache.o cplbhdlr.o cplbmgr.o flush.o -COBJS = cpu.o traps.o ints.o serial.o interrupts.o +START = start.o start1.o interrupt.o cache.o flush.o init_sdram.o +COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o + +EXTRA = init_sdram_bootrom_initblock.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) START := $(addprefix $(obj),$(START)) -all: $(obj).depend $(START) $(LIB) +all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h index d430e6c..25b96a9 100644 --- a/cpu/bf533/bf533_serial.h +++ b/cpu/bf533/bf533_serial.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_serial.h Serial Driver defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _Bf533_SERIAL_H @@ -63,8 +63,7 @@ int serial_getc(void); void serial_puts(const char *s); static void local_put_char(char ch); -extern int get_clock(void); -int baud_table[5] = {9600, 19200, 38400, 57600, 115200}; +int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; struct { unsigned char dl_high; diff --git a/cpu/bf533/cache.S b/cpu/bf533/cache.S index 8fac402..03aebe4 100644 --- a/cpu/bf533/cache.S +++ b/cpu/bf533/cache.S @@ -1,12 +1,11 @@ - - #define ASSEMBLY #include <asm/linkage.h> -#include <asm/cpu/def_LPBlackfin.h> +#include <config.h> +#include <asm/blackfin.h> .text .align 2 -ENTRY(blackfin_icache_flush_range) +ENTRY(_blackfin_icache_flush_range) R2 = -32; R2 = R0 & R2; P0 = R2; @@ -20,7 +19,7 @@ ENTRY(blackfin_icache_flush_range) SSYNC; RTS; -ENTRY(blackfin_dcache_flush_range) +ENTRY(_blackfin_dcache_flush_range) R2 = -32; R2 = R0 & R2; P0 = R2; @@ -35,19 +34,21 @@ ENTRY(blackfin_dcache_flush_range) RTS; ENTRY(_icache_invalidate) -ENTRY(invalidate_entire_icache) - [--SP] = ( R7:5); +ENTRY(_invalidate_entire_icache) + [--SP] = (R7:5); P0.L = (IMEM_CONTROL & 0xFFFF); P0.H = (IMEM_CONTROL >> 16); - R7 = [P0]; + R7 =[P0]; - /* Clear the IMC bit , All valid bits in the instruction + /* + * Clear the IMC bit , All valid bits in the instruction * cache are set to the invalid state */ - BITCLR(R7,IMC_P); + BITCLR(R7, IMC_P); CLI R6; - SSYNC; /* SSYNC required before invalidating cache. */ + /* SSYNC required before invalidating cache. */ + SSYNC; .align 8; [P0] = R7; SSYNC; @@ -58,54 +59,55 @@ ENTRY(invalidate_entire_icache) R7 = R7 | R6; CLI R6; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + SSYNC; .align 8; [P0] = R7; SSYNC; STI R6; - ( R7:5) = [SP++]; + (R7:5) =[SP++]; RTS; -/* Invalidate the Entire Data cache by +/* + * Invalidate the Entire Data cache by * clearing DMC[1:0] bits */ -ENTRY(invalidate_entire_dcache) +ENTRY(_invalidate_entire_dcache) ENTRY(_dcache_invalidate) - [--SP] = ( R7:6); + [--SP] = (R7:6); P0.L = (DMEM_CONTROL & 0xFFFF); P0.H = (DMEM_CONTROL >> 16); - R7 = [P0]; + R7 =[P0]; - /* Clear the DMC[1:0] bits, All valid bits in the data + /* + * Clear the DMC[1:0] bits, All valid bits in the data * cache are set to the invalid state */ - BITCLR(R7,DMC0_P); - BITCLR(R7,DMC1_P); + BITCLR(R7, DMC0_P); + BITCLR(R7, DMC1_P); CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + SSYNC; .align 8; [P0] = R7; SSYNC; STI R6; - /* Configures the data cache again */ R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); R7 = R7 | R6; CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + SSYNC; .align 8; [P0] = R7; SSYNC; STI R6; - ( R7:6) = [SP++]; + (R7:6) =[SP++]; RTS; -ENTRY(blackfin_dcache_invalidate_range) +ENTRY(_blackfin_dcache_invalidate_range) R2 = -32; R2 = R0 & R2; P0 = R2; @@ -113,13 +115,14 @@ ENTRY(blackfin_dcache_invalidate_range) CSYNC; 1: FLUSHINV[P0++]; - CC = P0 < P1 (iu); - IF CC JUMP 1b (bp); + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); - /* If the data crosses a cache line, then we'll be pointing to - ** the last cache line, but won't have flushed/invalidated it yet, so do - ** one more. - */ + /* + * If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed/invalidated it yet, so do + * one more. + */ FLUSHINV[P0]; SSYNC; RTS; diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk index a9d529e..6a713c3 100644 --- a/cpu/bf533/config.mk +++ b/cpu/bf533/config.mk @@ -1,6 +1,6 @@ # U-boot - config.mk # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # -PLATFORM_RELFLAGS += -ffixed-P5 +PLATFORM_RELFLAGS += -mcpu=bf533 -ffixed-P5 diff --git a/cpu/bf533/cplbhdlr.S b/cpu/bf533/cplbhdlr.S deleted file mode 100644 index 61be5bb..0000000 --- a/cpu/bf533/cplbhdlr.S +++ /dev/null @@ -1,193 +0,0 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - */ - - -/* Include an exception handler to invoke the CPLB manager - */ - -#include <asm-blackfin/linkage.h> -#include <asm/cplb.h> -#include <asm/entry.h> - - -.text - -.globl _cplb_hdr; -.type _cplb_hdr, STT_FUNC; -.extern _cplb_mgr; -.type _cplb_mgr, STT_FUNC; -.extern __unknown_exception_occurred; -.type __unknown_exception_occurred, STT_FUNC; -.extern __cplb_miss_all_locked; -.type __cplb_miss_all_locked, STT_FUNC; -.extern __cplb_miss_without_replacement; -.type __cplb_miss_without_replacement, STT_FUNC; -.extern __cplb_protection_violation; -.type __cplb_protection_violation, STT_FUNC; -.extern panic_pv; - -.align 2; - -ENTRY(_cplb_hdr) - SSYNC; - [--SP] = ( R7:0, P5:0 ); - [--SP] = ASTAT; - [--SP] = SEQSTAT; - [--SP] = I0; - [--SP] = I1; - [--SP] = I2; - [--SP] = I3; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC0; - [--SP] = LT1; - [--SP] = LB1; - [--SP] = LC1; - R2 = SEQSTAT; - - /*Mask the contents of SEQSTAT and leave only EXCAUSE in R2*/ - R2 <<= 26; - R2 >>= 26; - - R1 = 0x23; /* Data access CPLB protection violation */ - CC = R2 == R1; - IF !CC JUMP not_data_write; - R0 = 2; /* is a write to data space*/ - JUMP is_icplb_miss; - -not_data_write: - R1 = 0x2C; /* CPLB miss on an instruction fetch */ - CC = R2 == R1; - R0 = 0; /* is_data_miss == False*/ - IF CC JUMP is_icplb_miss; - - R1 = 0x26; - CC = R2 == R1; - IF !CC JUMP unknown; - - R0 = 1; /* is_data_miss == True*/ - -is_icplb_miss: - -#if ( defined (CONFIG_BLKFIN_CACHE) || defined (CONFIG_BLKFIN_DCACHE)) -#if ( defined (CONFIG_BLKFIN_CACHE) && !defined (CONFIG_BLKFIN_DCACHE)) - R1 = CPLB_ENABLE_ICACHE; -#endif -#if ( !defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE)) - R1 = CPLB_ENABLE_DCACHE; -#endif -#if ( defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE)) - R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; -#endif -#else - R1 = 0; -#endif - - [--SP] = RETS; - CALL _cplb_mgr; - RETS = [SP++]; - CC = R0 == 0; - IF !CC JUMP not_replaced; - LC1 = [SP++]; - LB1 = [SP++]; - LT1 = [SP++]; - LC0 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - I3 = [SP++]; - I2 = [SP++]; - I1 = [SP++]; - I0 = [SP++]; - SEQSTAT = [SP++]; - ASTAT = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -unknown: - [--SP] = RETS; - CALL __unknown_exception_occurred; - RETS = [SP++]; - JUMP unknown; -not_replaced: - CC = R0 == CPLB_NO_UNLOCKED; - IF !CC JUMP next_check; - [--SP] = RETS; - CALL __cplb_miss_all_locked; - RETS = [SP++]; -next_check: - CC = R0 == CPLB_NO_ADDR_MATCH; - IF !CC JUMP next_check2; - [--SP] = RETS; - CALL __cplb_miss_without_replacement; - RETS = [SP++]; - JUMP not_replaced; -next_check2: - CC = R0 == CPLB_PROT_VIOL; - IF !CC JUMP strange_return_from_cplb_mgr; - [--SP] = RETS; - CALL __cplb_protection_violation; - RETS = [SP++]; - JUMP not_replaced; -strange_return_from_cplb_mgr: - IDLE; - CSYNC; - JUMP strange_return_from_cplb_mgr; - -/************************************ - * Diagnostic exception handlers - */ - -__cplb_miss_all_locked: - sp += -12; - R0 = CPLB_NO_UNLOCKED; - call panic_bfin; - SP += 12; - RTS; - - __cplb_miss_without_replacement: - sp += -12; - R0 = CPLB_NO_ADDR_MATCH; - call panic_bfin; - SP += 12; - RTS; - -__cplb_protection_violation: - sp += -12; - R0 = CPLB_PROT_VIOL; - call panic_bfin; - SP += 12; - RTS; - -__unknown_exception_occurred: - - /* This function is invoked by the default exception - * handler, if it does not recognise the kind of - * exception that has occurred. In other words, the - * default handler only handles some of the system's - * exception types, and it does not expect any others - * to occur. If your application is going to be using - * other kinds of exceptions, you must replace the - * default handler with your own, that handles all the - * exceptions you will use. - * - * Since there's nothing we can do, we just loop here - * at what we hope is a suitably informative label. - */ - - IDLE; -do_not_know_what_to_do: - CSYNC; - JUMP __unknown_exception_occurred; - - RTS; -.__unknown_exception_occurred.end: -.global __unknown_exception_occurred; -.type __unknown_exception_occurred, STT_FUNC; - -panic_bfin: - RTS; diff --git a/cpu/bf533/cplbmgr.S b/cpu/bf533/cplbmgr.S deleted file mode 100644 index 7a0b048..0000000 --- a/cpu/bf533/cplbmgr.S +++ /dev/null @@ -1,601 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Modification: Dec 07 2004 - * 1. Correction in icheck_lock. Valid lock entries were - * geting victimized, for instruction cplb replacement. - * 2. Setup loop's are modified as now toolchain support's P Indexed - * addressing - * :LG Soft India - * - */ - -/* Usage: int _cplb_mgr(is_data_miss,int enable_cache) - * is_data_miss==2 => Mark as Dirty, write to the clean data page - * is_data_miss==1 => Replace a data CPLB. - * is_data_miss==0 => Replace an instruction CPLB. - * - * Returns: - * CPLB_RELOADED => Successfully updated CPLB table. - * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted.This indicates - * that the CPLBs in the configuration tablei are badly - * configured, as this should never occur. - * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the exception, - * is not covered by any of the CPLBs in the configuration - * table. The application isi presumably misbehaving. - * CPLB_PROT_VIOL => The address being accessed, that triggered thei exception, - * was not a first-write to a clean Write Back Data page, - * and so presumably is a genuine violation of the page's - * protection attributes. The application is misbehaving. - */ -#define ASSEMBLY - -#include <asm-blackfin/linkage.h> -#include <asm-blackfin/blackfin.h> -#include <asm-blackfin/cplbtab.h> -#include <asm-blackfin/cplb.h> - -.text - -.align 2; -ENTRY(_cplb_mgr) - - [--SP]=( R7:0,P5:0 ); - - CC = R0 == 2; - IF CC JUMP dcplb_write; - - CC = R0 == 0; - IF !CC JUMP dcplb_miss_compare; - - /* ICPLB Miss Exception. We need to choose one of the - * currently-installed CPLBs, and replace it with one - * from the configuration table. - */ - - P4.L = (ICPLB_FAULT_ADDR & 0xFFFF); - P4.H = (ICPLB_FAULT_ADDR >> 16); - - P1 = 16; - P5.L = page_size_table; - P5.H = page_size_table; - - P0.L = (ICPLB_DATA0 & 0xFFFF); - P0.H = (ICPLB_DATA0 >> 16); - R4 = [P4]; /* Get faulting address*/ - R6 = 64; /* Advance past the fault address, which*/ - R6 = R6 + R4; /* we'll use if we find a match*/ - R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/ - - R5 = 0; -isearch: - - R1 = [P0-0x100]; /* Address for this CPLB */ - - R0 = [P0++]; /* Info for this CPLB*/ - CC = BITTST(R0,0); /* Is the CPLB valid?*/ - IF !CC JUMP nomatch; /* Skip it, if not.*/ - CC = R4 < R1(IU); /* If fault address less than page start*/ - IF CC JUMP nomatch; /* then skip this one.*/ - R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/ - P1 = R2; - P1 = P5 + (P1<<2); /* index into page-size table*/ - R2 = [P1]; /* Get the page size*/ - R1 = R1 + R2; /* and add to page start, to get page end*/ - CC = R4 < R1(IU); /* and see whether fault addr is in page.*/ - IF !CC R4 = R6; /* If so, advance the address and finish loop.*/ - IF !CC JUMP isearch_done; -nomatch: - /* Go around again*/ - R5 += 1; - CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/ - IF !CC JUMP isearch; - -isearch_done: - I0 = R4; /* Fault address we'll search for*/ - - /* set up pointers */ - P0.L = (ICPLB_DATA0 & 0xFFFF); - P0.H = (ICPLB_DATA0 >> 16); - - /* The replacement procedure for ICPLBs */ - - P4.L = (IMEM_CONTROL & 0xFFFF); - P4.H = (IMEM_CONTROL >> 16); - - /* disable cplbs */ - R5 = [P4]; /* Control Register*/ - BITCLR(R5,ENICPLB_P); - CLI R1; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R1; - - R1 = -1; /* end point comparison */ - R3 = 16; /* counter */ - - /* Search through CPLBs for first non-locked entry */ - /* Overwrite it by moving everyone else up by 1 */ -icheck_lock: - R0 = [P0++]; - R3 = R3 + R1; - CC = R3 == R1; - IF CC JUMP all_locked; - CC = BITTST(R0, 0); /* an invalid entry is good */ - IF !CC JUMP ifound_victim; - CC = BITTST(R0,1); /* but a locked entry isn't */ - IF CC JUMP icheck_lock; - -ifound_victim: -#ifdef CONFIG_CPLB_INFO - R7 = [P0 - 0x104]; - P2.L = ipdt_table; - P2.H = ipdt_table; - P3.L = ipdt_swapcount_table; - P3.H = ipdt_swapcount_table; - P3 += -4; -icount: - R2 = [P2]; /* address from config table */ - P2 += 8; - P3 += 8; - CC = R2==-1; - IF CC JUMP icount_done; - CC = R7==R2; - IF !CC JUMP icount; - R7 = [P3]; - R7 += 1; - [P3] = R7; - CSYNC; -icount_done: -#endif - LC0=R3; - LSETUP(is_move,ie_move) LC0; -is_move: - R0 = [P0]; - [P0 - 4] = R0; - R0 = [P0 - 0x100]; - [P0-0x104] = R0; -ie_move:P0+=4; - - /* We've made space in the ICPLB table, so that ICPLB15 - * is now free to be overwritten. Next, we have to determine - * which CPLB we need to install, from the configuration - * table. This is a matter of getting the start-of-page - * addresses and page-lengths from the config table, and - * determining whether the fault address falls within that - * range. - */ - - P2.L = ipdt_table; - P2.H = ipdt_table; -#ifdef CONFIG_CPLB_INFO - P3.L = ipdt_swapcount_table; - P3.H = ipdt_swapcount_table; - P3 += -8; -#endif - P0.L = page_size_table; - P0.H = page_size_table; - - /* Retrieve our fault address (which may have been advanced - * because the faulting instruction crossed a page boundary). - */ - - R0 = I0; - - /* An extraction pattern, to get the page-size bits from - * the CPLB data entry. Bits 16-17, so two bits at posn 16. - */ - - R1 = ((16<<8)|2); -inext: R4 = [P2++]; /* address from config table */ - R2 = [P2++]; /* data from config table */ -#ifdef CONFIG_CPLB_INFO - P3 += 8; -#endif - - CC = R4 == -1; /* End of config table*/ - IF CC JUMP no_page_in_table; - - /* See if failed address > start address */ - CC = R4 <= R0(IU); - IF !CC JUMP inext; - - /* extract page size (17:16)*/ - R3 = EXTRACT(R2, R1.L) (Z); - - /* add page size to addr to get range */ - - P5 = R3; - P5 = P0 + (P5 << 2); /* scaled, for int access*/ - R3 = [P5]; - R3 = R3 + R4; - - /* See if failed address < (start address + page size) */ - CC = R0 < R3(IU); - IF !CC JUMP inext; - - /* We've found a CPLB in the config table that covers - * the faulting address, so install this CPLB into the - * last entry of the table. - */ - - P1.L = (ICPLB_DATA15 & 0xFFFF); /*ICPLB_DATA15*/ - P1.H = (ICPLB_DATA15 >> 16); - [P1] = R2; - [P1-0x100] = R4; -#ifdef CONFIG_CPLB_INFO - R3 = [P3]; - R3 += 1; - [P3] = R3; -#endif - - /* P4 points to IMEM_CONTROL, and R5 contains its old - * value, after we disabled ICPLBS. Re-enable them. - */ - - BITSET(R5,ENICPLB_P); - CLI R2; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -/* FAILED CASES*/ -no_page_in_table: - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_NO_ADDR_MATCH; - RTS; -all_locked: - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_NO_UNLOCKED; - RTS; -prot_violation: - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_PROT_VIOL; - RTS; - -dcplb_write: - - /* if a DCPLB is marked as write-back (CPLB_WT==0), and - * it is clean (CPLB_DIRTY==0), then a write to the - * CPLB's page triggers a protection violation. We have to - * mark the CPLB as dirty, to indicate that there are - * pending writes associated with the CPLB. - */ - - P4.L = (DCPLB_STATUS & 0xFFFF); - P4.H = (DCPLB_STATUS >> 16); - P3.L = (DCPLB_DATA0 & 0xFFFF); - P3.H = (DCPLB_DATA0 >> 16); - R5 = [P4]; - - /* A protection violation can be caused by more than just writes - * to a clean WB page, so we have to ensure that: - * - It's a write - * - to a clean WB page - * - and is allowed in the mode the access occurred. - */ - - CC = BITTST(R5, 16); /* ensure it was a write*/ - IF !CC JUMP prot_violation; - - /* to check the rest, we have to retrieve the DCPLB.*/ - - /* The low half of DCPLB_STATUS is a bit mask*/ - - R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/ - R3 = 30; /* so we can use this to determine the offset*/ - R2.L = SIGNBITS R2; - R2 = R2.L (Z); /* into the DCPLB table.*/ - R3 = R3 - R2; - P4 = R3; - P3 = P3 + (P4<<2); - R3 = [P3]; /* Retrieve the CPLB*/ - - /* Now we can check whether it's a clean WB page*/ - - CC = BITTST(R3, 14); /* 0==WB, 1==WT*/ - IF CC JUMP prot_violation; - CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/ - IF CC JUMP prot_violation; - - /* Check whether the write is allowed in the mode that was active.*/ - - R2 = 1<<3; /* checking write in user mode*/ - CC = BITTST(R5, 17); /* 0==was user, 1==was super*/ - R5 = CC; - R2 <<= R5; /* if was super, check write in super mode*/ - R2 = R3 & R2; - CC = R2 == 0; - IF CC JUMP prot_violation; - - /* It's a genuine write-to-clean-page.*/ - - BITSET(R3, 7); /* mark as dirty*/ - [P3] = R3; /* and write back.*/ - CSYNC; - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -dcplb_miss_compare: - - /* Data CPLB Miss event. We need to choose a CPLB to - * evict, and then locate a new CPLB to install from the - * config table, that covers the faulting address. - */ - - P1.L = (DCPLB_DATA15 & 0xFFFF); - P1.H = (DCPLB_DATA15 >> 16); - - P4.L = (DCPLB_FAULT_ADDR & 0xFFFF); - P4.H = (DCPLB_FAULT_ADDR >> 16); - R4 = [P4]; - I0 = R4; - - /* The replacement procedure for DCPLBs*/ - - R6 = R1; /* Save for later*/ - - /* Turn off CPLBs while we work.*/ - P4.L = (DMEM_CONTROL & 0xFFFF); - P4.H = (DMEM_CONTROL >> 16); - R5 = [P4]; - BITCLR(R5,ENDCPLB_P); - CLI R0; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R0; - - /* Start looking for a CPLB to evict. Our order of preference - * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs - * are no good. - */ - - I1.L = (DCPLB_DATA0 & 0xFFFF); - I1.H = (DCPLB_DATA0 >> 16); - P1 = 3; - P2 = 16; - I2.L = dcplb_preference; - I2.H = dcplb_preference; - LSETUP(sdsearch1, edsearch1) LC0 = P1; -sdsearch1: - R0 = [I2++]; /* Get the bits we're interested in*/ - P0 = I1; /* Go back to start of table*/ - LSETUP (sdsearch2, edsearch2) LC1 = P2; -sdsearch2: - R1 = [P0++]; /* Fetch each installed CPLB in turn*/ - R2 = R1 & R0; /* and test for interesting bits.*/ - CC = R2 == 0; /* If none are set, it'll do.*/ - IF !CC JUMP skip_stack_check; - - R2 = [P0 - 0x104]; /* R2 - PageStart */ - P3.L = page_size_table; /* retrive end address */ - P3.H = page_size_table; /* retrive end address */ - R3 = 0x2; /* 0th - position, 2 bits -length */ - nop; /*Anamoly 05000209*/ - R7 = EXTRACT(R1,R3.l); - R7 = R7 << 2; /* Page size index offset */ - P5 = R7; - P3 = P3 + P5; - R7 = [P3]; /* page size in 1K bytes */ - - R7 = R7 << 0xA; /* in bytes * 1024*/ - R7 = R2 + R7; /* R7 - PageEnd */ - R4 = SP; /* Test SP is in range */ - - CC = R7 < R4; /* if PageEnd < SP */ - IF CC JUMP dfound_victim; - R3 = 0x284; /* stack length from start of trap till the point */ - /* 20 stack locations for future modifications */ - R4 = R4 + R3; - CC = R4 < R2; /* if SP + stacklen < PageStart */ - IF CC JUMP dfound_victim; -skip_stack_check: - -edsearch2: NOP; -edsearch1: NOP; - - /* If we got here, we didn't find a DCPLB we considered - * replacable, which means all of them were locked. - */ - - JUMP all_locked; -dfound_victim: - -#ifdef CONFIG_CPLB_INFO - R1 = [P0 - 0x104]; - P2.L = dpdt_table; - P2.H = dpdt_table; - P3.L = dpdt_swapcount_table; - P3.H = dpdt_swapcount_table; - P3 += -4; -dicount: - R2 = [P2]; - P2 += 8; - P3 += 8; - CC = R2==-1; - IF CC JUMP dicount_done; - CC = R1==R2; - IF !CC JUMP dicount; - R1 = [P3]; - R1 += 1; - [P3] = R1; - CSYNC; -dicount_done: -#endif - - /* Clean down the hardware loops*/ - R2 = 0; - LC1 = R2; - LC0 = R2; - - /* There's a suitable victim in [P0-4] (because we've - * advanced already). If it's a valid dirty write-back - * CPLB, we need to flush the pending writes first. - */ - - CC = BITTST(R1, 0); /* Is it valid?*/ - IF !CC JUMP Ddoverwrite;/* nope.*/ - CC = BITTST(R1, 7); /* Is it dirty?*/ - IF !CC JUMP Ddoverwrite (BP); /* Nope.*/ - CC = BITTST(R1, 14); /* Is it Write-Through?*/ - IF CC JUMP Ddoverwrite; /* Yep*/ - - /* This is a dirty page, so we need to flush all writes - * that are pending on the page. - */ - - /* Retrieve the page start address*/ - R0 = [P0 - 0x104]; - [--sp] = rets; - CALL dcplb_flush; /* R0==CPLB addr, R1==CPLB data*/ - rets = [sp++]; -Ddoverwrite: - - /* [P0-4] is a suitable victim CPLB, so we want to - * overwrite it by moving all the following CPLBs - * one space closer to the start. - */ - - R1.L = ((DCPLB_DATA15+4) & 0xFFFF); /*DCPLB_DATA15+4*/ - R1.H = ((DCPLB_DATA15+4) >> 16); - R0 = P0; - - /* If the victim happens to be in DCPLB15, - * we don't need to move anything. - */ - - CC = R1 == R0; - IF CC JUMP de_moved; - R1 = R1 - R0; - R1 >>= 2; - P1 = R1; - LSETUP(ds_move, de_move) LC0=P1; -ds_move: - R0 = [P0++]; /* move data */ - [P0 - 8] = R0; - R0 = [P0-0x104] /* move address */ -de_move: [P0-0x108] = R0; - - /* We've now made space in DCPLB15 for the new CPLB to be - * installed. The next stage is to locate a CPLB in the - * config table that covers the faulting address. - */ - -de_moved:NOP; - R0 = I0; /* Our faulting address */ - - P2.L = dpdt_table; - P2.H = dpdt_table; -#ifdef CONFIG_CPLB_INFO - P3.L = dpdt_swapcount_table; - P3.H = dpdt_swapcount_table; - P3 += -8; -#endif - - P1.L = page_size_table; - P1.H = page_size_table; - - /* An extraction pattern, to retrieve bits 17:16.*/ - - R1 = (16<<8)|2; -dnext: R4 = [P2++]; /* address */ - R2 = [P2++]; /* data */ -#ifdef CONFIG_CPLB_INFO - P3 += 8; -#endif - - CC = R4 == -1; - IF CC JUMP no_page_in_table; - - /* See if failed address > start address */ - CC = R4 <= R0(IU); - IF !CC JUMP dnext; - - /* extract page size (17:16)*/ - R3 = EXTRACT(R2, R1.L) (Z); - - /* add page size to addr to get range */ - - P5 = R3; - P5 = P1 + (P5 << 2); - R3 = [P5]; - R3 = R3 + R4; - - /* See if failed address < (start address + page size) */ - CC = R0 < R3(IU); - IF !CC JUMP dnext; - - /* We've found the CPLB that should be installed, so - * write it into CPLB15, masking off any caching bits - * if necessary. - */ - - P1.L = (DCPLB_DATA15 & 0xFFFF); - P1.H = (DCPLB_DATA15 >> 16); - - /* If the DCPLB has cache bits set, but caching hasn't - * been enabled, then we want to mask off the cache-in-L1 - * bit before installing. Moreover, if caching is off, we - * also want to ensure that the DCPLB has WT mode set, rather - * than WB, since WB pages still trigger first-write exceptions - * even when not caching is off, and the page isn't marked as - * cachable. Finally, we could mark the page as clean, not dirty, - * but we choose to leave that decision to the user; if the user - * chooses to have a CPLB pre-defined as dirty, then they always - * pay the cost of flushing during eviction, but don't pay the - * cost of first-write exceptions to mark the page as dirty. - */ - -#ifdef CONFIG_BLKFIN_WT - BITSET(R6, 14); /* Set WT*/ -#endif - - [P1] = R2; - [P1-0x100] = R4; -#ifdef CONFIG_CPLB_INFO - R3 = [P3]; - R3 += 1; - [P3] = R3; -#endif - - /* We've installed the CPLB, so re-enable CPLBs. P4 - * points to DMEM_CONTROL, and R5 is the value we - * last wrote to it, when we were disabling CPLBs. - */ - - BITSET(R5,ENDCPLB_P); - CLI R2; - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -.data -.align 4; -page_size_table: -.byte4 0x00000400; /* 1K */ -.byte4 0x00001000; /* 4K */ -.byte4 0x00100000; /* 1M */ -.byte4 0x00400000; /* 4M */ - -.align 4; -dcplb_preference: -.byte4 0x00000001; /* valid bit */ -.byte4 0x00000082; /* dirty+lock bits */ -.byte4 0x00000002; /* lock bit */ diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c index 78e2b96..8118861 100644 --- a/cpu/bf533/cpu.c +++ b/cpu/bf533/cpu.c @@ -1,7 +1,7 @@ /* * U-boot - cpu.c CPU specific functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,80 +21,27 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> #include <asm/blackfin.h> #include <command.h> #include <asm/entry.h> +#include <asm/cplb.h> +#include <asm/io.h> -#define SSYNC() asm("ssync;") #define CACHE_ON 1 #define CACHE_OFF 0 -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -#define ANOMALY_05000158 0x200 -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -static unsigned int icplb_table[16][2]={ - {0xFFA00000, L1_IMEMORY}, - {0x00000000, SDRAM_IKERNEL}, /*SDRAM_Page1*/ - {0x00400000, SDRAM_IKERNEL}, /*SDRAM_Page1*/ - {0x07C00000, SDRAM_IKERNEL}, /*SDRAM_Page14*/ - {0x00800000, SDRAM_IGENERIC}, /*SDRAM_Page2*/ - {0x00C00000, SDRAM_IGENERIC}, /*SDRAM_Page2*/ - {0x01000000, SDRAM_IGENERIC}, /*SDRAM_Page4*/ - {0x01400000, SDRAM_IGENERIC}, /*SDRAM_Page5*/ - {0x01800000, SDRAM_IGENERIC}, /*SDRAM_Page6*/ - {0x01C00000, SDRAM_IGENERIC}, /*SDRAM_Page7*/ - {0x02000000, SDRAM_IGENERIC}, /*SDRAM_Page8*/ - {0x02400000, SDRAM_IGENERIC}, /*SDRAM_Page9*/ - {0x02800000, SDRAM_IGENERIC}, /*SDRAM_Page10*/ - {0x02C00000, SDRAM_IGENERIC}, /*SDRAM_Page11*/ - {0x03000000, SDRAM_IGENERIC}, /*SDRAM_Page12*/ - {0x03400000, SDRAM_IGENERIC}, /*SDRAM_Page13*/ -}; - -static unsigned int dcplb_table[16][2]={ - {0xFFA00000,L1_DMEMORY}, - {0x00000000,SDRAM_DKERNEL}, /*SDRAM_Page1*/ - {0x00400000,SDRAM_DKERNEL}, /*SDRAM_Page1*/ - {0x07C00000,SDRAM_DKERNEL}, /*SDRAM_Page15*/ - {0x00800000,SDRAM_DGENERIC}, /*SDRAM_Page2*/ - {0x00C00000,SDRAM_DGENERIC}, /*SDRAM_Page3*/ - {0x01000000,SDRAM_DGENERIC}, /*SDRAM_Page4*/ - {0x01400000,SDRAM_DGENERIC}, /*SDRAM_Page5*/ - {0x01800000,SDRAM_DGENERIC}, /*SDRAM_Page6*/ - {0x01C00000,SDRAM_DGENERIC}, /*SDRAM_Page7*/ - {0x02000000,SDRAM_DGENERIC}, /*SDRAM_Page8*/ - {0x02400000,SDRAM_DGENERIC}, /*SDRAM_Page9*/ - {0x02800000,SDRAM_DGENERIC}, /*SDRAM_Page10*/ - {0x02C00000,SDRAM_DGENERIC}, /*SDRAM_Page11*/ - {0x03000000,SDRAM_DGENERIC}, /*SDRAM_Page12*/ - {0x20000000,SDRAM_EBIU}, /*For Network */ -}; - -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - __asm__ __volatile__ - ("cli r3;" - "P0 = %0;" - "JUMP (P0);" - : - : "r" (L1_ISRAM) - ); + __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM) + ); return 0; } @@ -112,29 +59,62 @@ int cleanup_before_linux(void) void icache_enable(void) { - unsigned int *I0,*I1; - int i; + unsigned int *I0, *I1; + int i, j = 0; + /* Before enable icache, disable it first */ + icache_disable(); I0 = (unsigned int *)ICPLB_ADDR0; I1 = (unsigned int *)ICPLB_DATA0; - for(i=0;i<16;i++){ - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & icplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & icplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + if (j == 16) { + break; + } + } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j < 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; } + + } + cli(); - SSYNC(); + sync(); + asm(" .align 8; "); *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); + sync(); sti(); } void icache_disable(void) { cli(); - SSYNC(); + sync(); + asm(" .align 8; "); *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); + sync(); sti(); } @@ -143,7 +123,7 @@ int icache_status(void) unsigned int value; value = *(unsigned int *)IMEM_CONTROL; - if( value & (IMC|ENICPLB) ) + if (value & (IMC | ENICPLB)) return CACHE_ON; else return CACHE_OFF; @@ -151,38 +131,90 @@ int icache_status(void) void dcache_enable(void) { - unsigned int *I0,*I1; + unsigned int *I0, *I1; unsigned int temp; - int i; + int i, j = 0; + + /* Before enable dcache, disable it first */ + dcache_disable(); I0 = (unsigned int *)DCPLB_ADDR0; I1 = (unsigned int *)DCPLB_DATA0; - for(i=0;i<16;i++){ - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & dcplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + } else { + debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & dcplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + if (j == 16) { + break; + } } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j < 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; + } + } + cli(); temp = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - *(unsigned int *)DMEM_CONTROL = ACACHE_BCACHE |ENDCPLB |PORT_PREF0|temp; - SSYNC(); + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; + sync(); sti(); } void dcache_disable(void) { + unsigned int *I0, *I1; + int i; + cli(); - SSYNC(); - *(unsigned int *)DMEM_CONTROL &= ~(ACACHE_BCACHE |ENDCPLB |PORT_PREF0); - SSYNC(); + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); sti(); + + /* after disable dcache, + * clear it so we don't confuse the next application + */ + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + for (i = 0; i < 16; i++) { + *I0++ = 0x0; + *I1++ = 0x0; + } } int dcache_status(void) { unsigned int value; value = *(unsigned int *)DMEM_CONTROL; - if( value & (ENDCPLB)) + if (value & (ENDCPLB)) return CACHE_ON; else return CACHE_OFF; diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h index 7ec3387..b6b73b1 100644 --- a/cpu/bf533/cpu.h +++ b/cpu/bf533/cpu.h @@ -1,7 +1,7 @@ /* * U-boot - cpu.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _CPU_H_ @@ -32,8 +32,8 @@ #define DEF_INTERRUPT_FLAGS 1 #define MAX_TIM_LOAD 0xFFFFFFFF -void blackfin_irq_panic(int reason, struct pt_regs * reg); -extern void dump(struct pt_regs * regs); +void blackfin_irq_panic(int reason, struct pt_regs *reg); +extern void dump(struct pt_regs *regs); void display_excp(void); asmlinkage void evt_nmi(void); asmlinkage void evt_exception(void); @@ -50,16 +50,17 @@ asmlinkage void evt_evt12(void); asmlinkage void evt_evt13(void); asmlinkage void evt_soft_int1(void); asmlinkage void evt_system_call(void); -void blackfin_irq_panic(int reason, struct pt_regs * regs); +void blackfin_irq_panic(int reason, struct pt_regs *regs); void blackfin_free_irq(unsigned int irq, void *dev_id); -void call_isr(int irq, struct pt_regs * fp); +void call_isr(int irq, struct pt_regs *fp); void blackfin_do_irq(int vec, struct pt_regs *fp); void blackfin_init_IRQ(void); void blackfin_enable_irq(unsigned int irq); void blackfin_disable_irq(unsigned int irq); -extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); int blackfin_request_irq(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long flags,const char *devname,void *dev_id); + void (*handler) (int, void *, struct pt_regs *), + unsigned long flags, const char *devname, + void *dev_id); void timer_init(void); #endif diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S index 9fbdefc..62e3d65 100644 --- a/cpu/bf533/flush.S +++ b/cpu/bf533/flush.S @@ -1,15 +1,14 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * Copyright (C) 2004 LG SOft India. All Rights Reserved. +/* Copyright (C) 2003-2007 Analog Devices Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. - * - * Blackfin BF533/2.6 support : LG Soft India */ + #define ASSEMBLY #include <asm/linkage.h> #include <asm/cplb.h> +#include <config.h> #include <asm/blackfin.h> .text @@ -20,7 +19,7 @@ * in the instruction cache. */ -ENTRY(flush_instruction_cache) +ENTRY(_flush_instruction_cache) [--SP] = ( R7:6, P5:4 ); LINK 12; SP += -12; @@ -33,7 +32,7 @@ ENTRY(flush_instruction_cache) inext: R0 = [P5++]; R1 = [P4++]; [--SP] = RETS; - CALL icplb_flush; /* R0 = page, R1 = data*/ + CALL _icplb_flush; /* R0 = page, R1 = data*/ RETS = [SP++]; iskip: R6 += -1; CC = R6; @@ -52,7 +51,7 @@ iskip: R6 += -1; */ .align 2 -ENTRY(icplb_flush) +ENTRY(_icplb_flush) [--SP] = ( R7:0, P5:0 ); [--SP] = LC0; [--SP] = LT0; @@ -86,16 +85,17 @@ ENTRY(icplb_flush) */ R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ + nop; /* Anamoly 05000209 */ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits */ + /* Save in extraction pattern for later deposit. */ + R3.H = R4.L << 0; /* So: * R0 = Page start * R1 = Page length (actually, offset into size/prefix tables) * R3 = sub-bank deposit values - * + * * The cache has 2 Ways, and 64 sets, so we iterate through * the sets, accessing the tag for each Way, for our Bank and * sub-bank, looking for dirty, valid tags that match our @@ -180,8 +180,10 @@ iflush_whole_page: SSYNC; IFLUSH [P0++]; /* because CSYNC can't end loops.*/ LSETUP (isall, ieall) LC0 = P1; -isall:IFLUSH [P0++]; -ieall: NOP; +isall: + IFLUSH [P0++]; +ieall: + NOP; SSYNC; JUMP ifinished; @@ -191,7 +193,7 @@ ieall: NOP; * in the data cache. */ -ENTRY(flush_data_cache) +ENTRY(_flush_data_cache) [--SP] = ( R7:6, P5:4 ); LINK 12; SP += -12; @@ -209,7 +211,7 @@ next: R0 = [P5++]; CC = R2; IF !CC JUMP skip; /* If not, ignore it.*/ [--SP] = RETS; - CALL dcplb_flush; /* R0 = page, R1 = data*/ + CALL _dcplb_flush; /* R0 = page, R1 = data*/ RETS = [SP++]; skip: R6 += -1; CC = R6; @@ -228,7 +230,7 @@ skip: R6 += -1; */ .align 2 -ENTRY(dcplb_flush) +ENTRY(_dcplb_flush) [--SP] = ( R7:0, P5:0 ); [--SP] = LC0; [--SP] = LT0; @@ -290,14 +292,15 @@ bank_chosen: R3 = ((12<<8)|2); /* Extraction pattern */ nop; /*Anamoly 05000209*/ R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ + /* Save in extraction pattern for later deposit.*/ + R3.H = R4.L << 0; /* So: * R0 = Page start * R1 = Page length (actually, offset into size/prefix tables) * R2 = Bank select mask * R3 = sub-bank deposit values - * + * * The cache has 2 Ways, and 64 sets, so we iterate through * the sets, accessing the tag for each Way, for our Bank and * sub-bank, looking for dirty, valid tags that match our @@ -386,7 +389,7 @@ dflush_whole_page: CC = BITTST(R1, 16); /* Whether 1K or 4K*/ IF CC P1 = P2; P1 += -1; /* Unroll one iteration*/ - SSYNC; + SSYNC; FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ LSETUP (eall, eall) LC0 = P1; eall: FLUSHINV [P0++]; diff --git a/cpu/bf533/init_sdram.S b/cpu/bf533/init_sdram.S new file mode 100644 index 0000000..e1a8e2f --- /dev/null +++ b/cpu/bf533/init_sdram.S @@ -0,0 +1,179 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) + p0.h = hi(SPI_BAUD); + p0.l = lo(SPI_BAUD); + r0.l = CONFIG_SPI_BAUD; + w[p0] = r0.l; + SSYNC; +#endif + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf533/init_sdram_bootrom_initblock.S b/cpu/bf533/init_sdram_bootrom_initblock.S new file mode 100644 index 0000000..99ed920 --- /dev/null +++ b/cpu/bf533/init_sdram_bootrom_initblock.S @@ -0,0 +1,179 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) + p0.h = hi(SPI_BAUD); + p0.l = lo(SPI_BAUD); + r0.l = CONFIG_SPI_BAUD_INITBLOCK; + w[p0] = r0.l; + SSYNC; +#endif + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S index e780dc6..c356d53 100644 --- a/cpu/bf533/interrupt.S +++ b/cpu/bf533/interrupt.S @@ -1,7 +1,7 @@ /* * U-boot - interrupt.S Processing of interrupts and exception handling * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -35,208 +35,63 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY - +#include <config.h> +#include <asm/blackfin.h> #include <asm/hw_irq.h> #include <asm/entry.h> #include <asm/blackfin_defs.h> -#include <asm/cpu/bf533_irq.h> -.global blackfin_irq_panic; +.global _blackfin_irq_panic; .text .align 2 #ifndef CONFIG_KGDB -.global evt_emulation -evt_emulation: +.global _evt_emulation +_evt_emulation: SAVE_CONTEXT r0 = IRQ_EMU; r1 = seqstat; sp += -12; - call blackfin_irq_panic; + call _blackfin_irq_panic; sp += 12; rte; #endif -.global evt_nmi -evt_nmi: +.global _evt_nmi +_evt_nmi: SAVE_CONTEXT r0 = IRQ_NMI; r1 = RETN; sp += -12; - call blackfin_irq_panic; + call _blackfin_irq_panic; sp += 12; _evt_nmi_exit: rtn; -.global trap -trap: - [--sp] = r0; - [--sp] = r1; - [--sp] = p0; - [--sp] = p1; - [--sp] = astat; - r0 = seqstat; - R0 <<= 26; - R0 >>= 26; - p0 = r0; - p1.l = EVTABLE; - p1.h = EVTABLE; - p0 = p1 + (p0 << 1); - r1 = W[p0] (Z); - p1 = r1; - jump (pc + p1); - -.global _EVENT1 -_EVENT1: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT2 -_EVENT2: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT3 -_EVENT3: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT4 -_EVENT4: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT5 -_EVENT5: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT6 -_EVENT6: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT7 -_EVENT7: - RAISE 15; - JUMP.S _EXIT; - -.global _EVENT8 -_EVENT8: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT9 -_EVENT9: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT10 -_EVENT10: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT11 -_EVENT11: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT12 -_EVENT12: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT13 -_EVENT13: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT14 -_EVENT14: -/* RAISE 14; */ - CALL _cplb_hdr; - JUMP.S _EXIT; - -.global _EVENT19 -_EVENT19: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT20 -_EVENT20: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT21 -_EVENT21: - RAISE 14; - JUMP.S _EXIT; - -.global _EXIT -_EXIT: - ASTAT = [sp++]; - p1 = [sp++]; - p0 = [sp++]; - r1 = [sp++]; - r0 = [sp++]; - RTX; - -EVTABLE: - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x003E; - .byte2 0x0042; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte2 0x0000; - .byte2 0x001E; - .byte2 0x0022; - .byte2 0x0032; - .byte2 0x002e; - .byte2 0x0002; - .byte2 0x0036; - .byte2 0x002A; - .byte2 0x001A; - .byte2 0x0016; - .byte2 0x000A; - .byte2 0x000E; - .byte2 0x0012; - .byte2 0x0006; - .byte2 0x0026; +.global _trap +_trap: + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _trap_c + sp += 12; + RESTORE_ALL_SYS + rtx; -.global evt_rst -evt_rst: +.global _evt_rst +_evt_rst: SAVE_CONTEXT r0 = IRQ_RST; r1 = RETN; sp += -12; - call do_reset; + call _do_reset; sp += 12; _evt_rst_exit: @@ -246,19 +101,19 @@ irq_panic: r0 = IRQ_EVX; r1 = sp; sp += -12; - call blackfin_irq_panic; + call _blackfin_irq_panic; sp += 12; -.global evt_ivhw -evt_ivhw: +.global _evt_ivhw +_evt_ivhw: SAVE_CONTEXT RAISE 14; _evt_ivhw_exit: rti; -.global evt_timer -evt_timer: +.global _evt_timer +_evt_timer: SAVE_CONTEXT r0 = IRQ_CORETMR; sp += -12; @@ -269,91 +124,91 @@ evt_timer: rti; nop; -.global evt_evt7 -evt_evt7: +.global _evt_evt7 +_evt_evt7: SAVE_CONTEXT r0 = 7; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt7_exit: RESTORE_CONTEXT rti; -.global evt_evt8 -evt_evt8: +.global _evt_evt8 +_evt_evt8: SAVE_CONTEXT r0 = 8; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt8_exit: RESTORE_CONTEXT rti; -.global evt_evt9 -evt_evt9: +.global _evt_evt9 +_evt_evt9: SAVE_CONTEXT r0 = 9; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt9_exit: RESTORE_CONTEXT rti; -.global evt_evt10 -evt_evt10: +.global _evt_evt10 +_evt_evt10: SAVE_CONTEXT r0 = 10; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt10_exit: RESTORE_CONTEXT rti; -.global evt_evt11 -evt_evt11: +.global _evt_evt11 +_evt_evt11: SAVE_CONTEXT r0 = 11; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt11_exit: RESTORE_CONTEXT rti; -.global evt_evt12 -evt_evt12: +.global _evt_evt12 +_evt_evt12: SAVE_CONTEXT r0 = 12; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt12_exit: RESTORE_CONTEXT rti; -.global evt_evt13 -evt_evt13: +.global _evt_evt13 +_evt_evt13: SAVE_CONTEXT r0 = 13; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt13_exit: RESTORE_CONTEXT rti; -.global evt_system_call -evt_system_call: +.global _evt_system_call +_evt_system_call: [--sp] = r0; [--SP] = RETI; r0 = [sp++]; @@ -363,7 +218,7 @@ evt_system_call: r0 = [SP++]; SAVE_CONTEXT sp += -12; - call display_excp; + call _exception_handle; sp += 12; RESTORE_CONTEXT RTI; @@ -371,8 +226,8 @@ evt_system_call: evt_system_call_exit: rti; -.global evt_soft_int1 -evt_soft_int1: +.global _evt_soft_int1 +_evt_soft_int1: [--sp] = r0; [--SP] = RETI; r0 = [sp++]; @@ -382,7 +237,7 @@ evt_soft_int1: r0 = [SP++]; SAVE_CONTEXT sp += -12; - call display_excp; + call _exception_handle; sp += 12; RESTORE_CONTEXT RTI; diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c index df1a25e..14d06cf 100644 --- a/cpu/bf533/interrupts.c +++ b/cpu/bf533/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -10,7 +10,7 @@ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> * Copyright 2003 Metrowerks/Motorola * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) + * BuyWays B.V. (www.buyways.nl) * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -30,21 +30,22 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> #include <asm/machdep.h> #include <asm/irq.h> -#include <asm/cpu/defBF533.h> +#include <config.h> +#include <asm/blackfin.h> #include "cpu.h" static ulong timestamp; static ulong last_time; static int int_flag; -int irq_flags; /* needed by asm-blackfin/system.h */ +int irq_flags; /* needed by asm-blackfin/system.h */ /* Functions just to satisfy the linker */ @@ -61,7 +62,7 @@ unsigned long long get_ticks(void) * This function is derived from PowerPC code (timebase clock frequency). * On BF533 it returns the number of timer ticks per second. */ -ulong get_tbclk (void) +ulong get_tbclk(void) { ulong tbclk; @@ -91,22 +92,22 @@ void udelay(unsigned long usec) unsigned long cclk; cclk = (CONFIG_CCLK_HZ); - while ( usec > 1 ) { - /* - * how many clock ticks to delay? - * - request(in useconds) * clock_ticks(Hz) / useconds/second - */ + while (usec > 1) { + /* + * how many clock ticks to delay? + * - request(in useconds) * clock_ticks(Hz) / useconds/second + */ if (usec < 1000) { - delay = (usec * (cclk/244)) >> 12 ; + delay = (usec * (cclk / 244)) >> 12; usec = 0; } else { - delay = (1000 * (cclk/244)) >> 12 ; + delay = (1000 * (cclk / 244)) >> 12; usec -= 1000; } - asm volatile (" %0 = CYCLES;": "=g"(start)); + asm volatile (" %0 = CYCLES;":"=r" (start)); do { - asm volatile (" %0 = CYCLES; ": "=g"(stop)); + asm volatile (" %0 = CYCLES; ":"=r" (stop)); } while (stop - start < delay); } @@ -117,7 +118,7 @@ void timer_init(void) { *pTCNTL = 0x1; *pTSCALE = 0x0; - *pTCOUNT = MAX_TIM_LOAD; + *pTCOUNT = MAX_TIM_LOAD; *pTPERIOD = MAX_TIM_LOAD; *pTCNTL = 0x7; asm("CSYNC;"); @@ -146,20 +147,23 @@ ulong get_timer(ulong base) /* Number of clocks elapsed */ ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); - /* Find if the TCOUNT is reset - timestamp gives the number of times - TCOUNT got reset */ - if(clocks < last_time) + /** + * Find if the TCOUNT is reset + * timestamp gives the number of times + * TCOUNT got reset + */ + if (clocks < last_time) timestamp++; last_time = clocks; /* Get the number of milliseconds */ - milisec = clocks/(CONFIG_CCLK_HZ / 1000); + milisec = clocks / (CONFIG_CCLK_HZ / 1000); - /* Find the number of millisonds - that got elapsed before this TCOUNT - cycle */ - milisec += timestamp * (MAX_TIM_LOAD/(CONFIG_CCLK_HZ / 1000)); + /** + * Find the number of millisonds + * that got elapsed before this TCOUNT cycle + */ + milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); return (milisec - base); } diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c index 859f4b2..5586689 100644 --- a/cpu/bf533/ints.c +++ b/cpu/bf533/ints.c @@ -1,7 +1,7 @@ /* * U-boot - ints.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on ints.c * @@ -32,8 +32,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -51,9 +51,9 @@ void blackfin_irq_panic(int reason, struct pt_regs *regs) { printf("\n\nException: IRQ 0x%x entered\n", reason); - printf("code=[0x%x], ", (unsigned int) (regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int) regs); - printf("bad PC=0x%04x\n", (unsigned int) regs->pc); + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); dump(regs); printf("Unhandled IRQ or exceptions!\n"); printf("Please reset the board \n"); @@ -61,46 +61,56 @@ void blackfin_irq_panic(int reason, struct pt_regs *regs) void blackfin_init_IRQ(void) { - *(unsigned volatile long *) (SIC_IMASK) = SIC_UNMASK_ALL; + *(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL; cli(); #ifndef CONFIG_KGDB - *(unsigned volatile long *) (EVT_EMULATION_ADDR) = 0x0; + *(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0; #endif - *(unsigned volatile long *) (EVT_NMI_ADDR) = - (unsigned volatile long) evt_nmi; - *(unsigned volatile long *) (EVT_EXCEPTION_ADDR) = - (unsigned volatile long) trap; - *(unsigned volatile long *) (EVT_HARDWARE_ERROR_ADDR) = - (unsigned volatile long) evt_ivhw; - *(unsigned volatile long *) (EVT_RESET_ADDR) = - (unsigned volatile long) evt_rst; - *(unsigned volatile long *) (EVT_TIMER_ADDR) = - (unsigned volatile long) evt_timer; - *(unsigned volatile long *) (EVT_IVG7_ADDR) = - (unsigned volatile long) evt_evt7; - *(unsigned volatile long *) (EVT_IVG8_ADDR) = - (unsigned volatile long) evt_evt8; - *(unsigned volatile long *) (EVT_IVG9_ADDR) = - (unsigned volatile long) evt_evt9; - *(unsigned volatile long *) (EVT_IVG10_ADDR) = - (unsigned volatile long) evt_evt10; - *(unsigned volatile long *) (EVT_IVG11_ADDR) = - (unsigned volatile long) evt_evt11; - *(unsigned volatile long *) (EVT_IVG12_ADDR) = - (unsigned volatile long) evt_evt12; - *(unsigned volatile long *) (EVT_IVG13_ADDR) = - (unsigned volatile long) evt_evt13; - *(unsigned volatile long *) (EVT_IVG14_ADDR) = - (unsigned volatile long) evt_system_call; - *(unsigned volatile long *) (EVT_IVG15_ADDR) = - (unsigned volatile long) evt_soft_int1; - *(volatile unsigned long *) ILAT = 0; + *(unsigned volatile long *)(EVT_NMI_ADDR) = + (unsigned volatile long)evt_nmi; + *(unsigned volatile long *)(EVT_EXCEPTION_ADDR) = + (unsigned volatile long)trap; + *(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) = + (unsigned volatile long)evt_ivhw; + *(unsigned volatile long *)(EVT_RESET_ADDR) = + (unsigned volatile long)evt_rst; + *(unsigned volatile long *)(EVT_TIMER_ADDR) = + (unsigned volatile long)evt_timer; + *(unsigned volatile long *)(EVT_IVG7_ADDR) = + (unsigned volatile long)evt_evt7; + *(unsigned volatile long *)(EVT_IVG8_ADDR) = + (unsigned volatile long)evt_evt8; + *(unsigned volatile long *)(EVT_IVG9_ADDR) = + (unsigned volatile long)evt_evt9; + *(unsigned volatile long *)(EVT_IVG10_ADDR) = + (unsigned volatile long)evt_evt10; + *(unsigned volatile long *)(EVT_IVG11_ADDR) = + (unsigned volatile long)evt_evt11; + *(unsigned volatile long *)(EVT_IVG12_ADDR) = + (unsigned volatile long)evt_evt12; + *(unsigned volatile long *)(EVT_IVG13_ADDR) = + (unsigned volatile long)evt_evt13; + *(unsigned volatile long *)(EVT_IVG14_ADDR) = + (unsigned volatile long)evt_system_call; + *(unsigned volatile long *)(EVT_IVG15_ADDR) = + (unsigned volatile long)evt_soft_int1; + *(volatile unsigned long *)ILAT = 0; asm("csync;"); sti(); - *(volatile unsigned long *) IMASK = 0xffbf; + *(volatile unsigned long *)IMASK = 0xffbf; asm("csync;"); } +void exception_handle(void) +{ +#if defined (CONFIG_PANIC_HANG) + display_excp(); +#else + udelay(100000); /* allow messages to go out */ + do_reset(NULL, 0, 0, NULL); +#endif +} + void display_excp(void) { printf("Exception!\n"); diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c index 7b43ffd..6cab5da 100644 --- a/cpu/bf533/serial.c +++ b/cpu/bf533/serial.c @@ -1,7 +1,7 @@ /* * U-boot - serial.c Serial driver for BF533 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -49,6 +49,7 @@ #include <asm/bitops.h> #include <asm/delay.h> #include <asm/uaccess.h> +#include <asm/io.h> #include "bf533_serial.h" DECLARE_GLOBAL_DATA_PTR; @@ -58,15 +59,16 @@ unsigned long pll_div_fact; void calc_baud(void) { unsigned char i; - int temp; + int temp; + u_long sclk = get_sclk(); - for(i = 0; i < sizeof(baud_table)/sizeof(int); i++) { - temp = CONFIG_SCLK_HZ/(baud_table[i]*8); - if ( temp && 0x1 == 1 ) { + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + temp = sclk / (baud_table[i] * 8); + if ((temp & 0x1) == 1) { temp++; } - temp = temp/2; - hw_baud_table[i].dl_high = (temp >> 8)& 0xFF; + temp = temp / 2; + hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; hw_baud_table[i].dl_low = (temp) & 0xFF; } } @@ -74,6 +76,7 @@ void calc_baud(void) void serial_setbrg(void) { int i; + DECLARE_GLOBAL_DATA_PTR; calc_baud(); @@ -84,29 +87,29 @@ void serial_setbrg(void) /* Enable UART */ *pUART_GCTL |= UART_GCTL_UCEN; - asm("ssync;"); + sync(); /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH; - asm("ssync;"); + sync(); *pUART_DLL = hw_baud_table[i].dl_low; - asm("ssync;"); + sync(); *pUART_DLH = hw_baud_table[i].dl_high; - asm("ssync;"); + sync(); /* Clear DLAB in LCR to Access THR RBR IER */ ACCESS_PORT_IER; - asm("ssync;"); + sync(); /* Enable ERBFI and ELSI interrupts - * to poll SIC_ISR register*/ + * to poll SIC_ISR register*/ *pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI; - asm("ssync;"); + sync(); /* Set LCR to Word Lengh 8-bit word select */ *pUART_LCR = UART_LCR_WLS8; - asm("ssync;"); + sync(); return; } @@ -119,8 +122,7 @@ int serial_init(void) void serial_putc(const char c) { - if ((*pUART_LSR) & UART_LSR_TEMT) - { + if ((*pUART_LSR) & UART_LSR_TEMT) { if (c == '\n') serial_putc('\r'); @@ -148,17 +150,16 @@ int serial_getc(void) int ret; /* Poll for RX Interrupt */ - while (!((isr_val = *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)); + while (!((isr_val = + *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ; asm("csync;"); uart_lsr_val = *pUART_LSR; /* Clear status bit */ uart_rbr_val = *pUART_RBR; /* getc() */ if (isr_val & IRQ_UART_ERROR_BIT) { - ret = -1; - } - else - { + ret = -1; + } else { ret = uart_rbr_val & 0xff; } @@ -180,10 +181,10 @@ static void local_put_char(char ch) save_and_cli(flags); /* Poll for TX Interruput */ - while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)); + while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ; asm("csync;"); - *pUART_THR = ch; /* putc() */ + *pUART_THR = ch; /* putc() */ if (isr_val & IRQ_UART_ERROR_BIT) { printf("?"); @@ -191,5 +192,5 @@ static void local_put_char(char ch) restore_flags(flags); - return ; + return; } diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S index 6d58575..67a60cf 100644 --- a/cpu/bf533/start.S +++ b/cpu/bf533/start.S @@ -1,7 +1,7 @@ /* - * U-boot - start.S Startup file of u-boot for BF533 + * U-boot - start.S Startup file of u-boot for BF533/BF561 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on head.S * Copyright (c) 2003 Metrowerks/Motorola @@ -26,8 +26,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* @@ -38,9 +38,23 @@ #define ASSEMBLY #include <linux/config.h> -#include <asm/blackfin.h> #include <config.h> -#include <asm/mem_init.h> +#include <asm/blackfin.h> + +.global _stext; +.global __bss_start; +.global start; +.global _start; +.global _rambase; +.global _ramstart; +.global _ramend; +.global _bf533_data_dest; +.global _bf533_data_size; +.global edata; +.global _initialize; +.global _exit; +.global flashdataend; +.global init_sdram; #if (CONFIG_CCLK_DIV == 1) #define CONFIG_CCLK_ACT_DIV CCLK_DIV1 @@ -58,26 +72,12 @@ #define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly #endif -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global _rambase; -.global _ramstart; -.global _ramend; -.global _bf533_data_dest; -.global _bf533_data_size; -.global edata; -.global _initialize; -.global _exit; -.global flashdataend; - .text _start: start: _stext: - R0 = 0x30; + R0 = 0x32; SYSCFG = R0; SSYNC; @@ -120,8 +120,9 @@ _stext: /* Set loop counters to zero, to make sure that * hw loops are disabled. */ - lc0 = 0; - lc1 = 0; + r0 = 0; + lc0 = r0; + lc1 = r0; SSYNC; @@ -150,105 +151,40 @@ no_soft_reset: LSETUP(4,4) lc0 = p1; [ p0 ++ ] = r1; - /* - * Set PLL_CTL - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = (PLL_CTL >> 16); - p0.l = (PLL_CTL & 0xFFFF); /* Load the address */ - cli r2; /* Disable interrupts */ - w[p0] = r0; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - ssync; - - /* - * Turn on the CYCLES COUNTER - */ - r2 = SYSCFG; - BITSET (r2,1); - SYSCFG = r2; - - /* Configure SCLK & CCLK Dividers */ - r0 = CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV; - p0.h = (PLL_DIV >> 16); - p0.l = (PLL_DIV & 0xFFFF); - w[p0] = r0; - ssync; - -wait_for_pll_stab: - p0.h = (PLL_STAT >> 16); - p0.l = (PLL_STAT & 0xFFFF); - r0.l = w[p0]; - cc = bittst(r0,5); - if !cc jump wait_for_pll_stab; - - /* Configure SDRAM if SDRAM is already not enabled */ - p0.l = (EBIU_SDSTAT & 0xFFFF); - p0.h = (EBIU_SDSTAT >> 16); - r0.l = w[p0]; - cc = bittst(r0, 3); - if !cc jump skip_sdram_enable; - - /* SDRAM initialization */ - p0.l = (EBIU_SDGCTL & 0xFFFF); - p0.h = (EBIU_SDGCTL >> 16); /* SDRAM Memory Global Control Register */ - r0.h = (mem_SDGCTL >> 16); - r0.l = (mem_SDGCTL & 0xFFFF); - [p0] = r0; - ssync; - - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; w[p0] = r0.l; - ssync; + SSYNC; - p0.l = (EBIU_SDRRC & 0xFFFF); - p0.h = (EBIU_SDRRC >> 16); /* SDRAM Refresh Rate Control Register */ - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; + sp.l = (0xffb01000 & 0xFFFF); + sp.h = (0xffb01000 >> 16); -skip_sdram_enable: - nop; + call init_sdram; -#ifndef CFG_NO_FLASH /* relocate into to RAM */ - p1.l = (CFG_FLASH_BASE & 0xffff); - p1.h = (CFG_FLASH_BASE >> 16); + call get_pc; +offset: + r2.l = offset; + r2.h = offset; + r3.l = start; + r3.h = start; + r1 = r2 - r3; + + r0 = r0 - r1; + p1 = r0; + p2.l = (CFG_MONITOR_BASE & 0xffff); p2.h = (CFG_MONITOR_BASE >> 16); - r0.l = (CFG_MONITOR_LEN & 0xffff); - r0.h = (CFG_MONITOR_LEN >> 16); + + p3 = 0x04; + p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); + p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); loop1: - r1 = [p1]; - [p2] = r1; - p3=0x4; - p1=p1+p3; - p2=p2+p3; - r2=0x4; - r0=r0-r2; - cc=r0==0x0; + r1 = [p1 ++ p3]; + [p2 ++ p3] = r1; + cc=p2==p4; if !cc jump loop1; -#endif /* * configure STACK */ @@ -273,7 +209,8 @@ loop1: p0.l = (IMASK & 0xFFFF); p0.h = (IMASK >> 16); - r0 = IVG15_POS; + r0.l = LO(IVG15_POS); + r0.h = HI(IVG15_POS); [p0] = r0; raise 15; p0.l = WAIT_HERE; @@ -288,37 +225,10 @@ WAIT_HERE: _real_start: [ -- sp ] = reti; -#ifdef CONFIG_EZKIT533 - p0.l = (WDOG_CTL & 0xFFFF); - p0.h = (WDOG_CTL >> 16); - r0 = WATCHDOG_DISABLE(z); - w[p0] = r0; -#endif - - /* Code for initializing Async mem banks */ - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - /* DMA reset code to Hi of L1 SRAM */ copy: - P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ + /* P1 Points to the beginning of SYSTEM MMR Space */ + P1.H = hi(SYSMMR_BASE); P1.L = lo(SYSMMR_BASE); R0.H = reset_start; /* Source Address (high) */ @@ -329,7 +239,8 @@ copy: R1.H = hi(L1_ISRAM); /* Destination Address (high) */ R1.L = lo(L1_ISRAM); /* Destination Address (low) */ R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ + /* Destination DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); DMA: R6 = 0x1 (Z); @@ -342,57 +253,24 @@ DMA: Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - - IDLE; /* Wait for DMA to Complete */ - - R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - /* DMA reset code to DATA BANK A which uses this port - * to avoid following problem - * " Data from a Data Cache fill can be corrupoted after or during - * instruction DMA if certain core stalls exist" - */ - -copy_as_data: - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(DATA_BANKA_SRAM); /* Destination Address (high) */ - R1.L = lo(DATA_BANKA_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ - -DMA_DATA: - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + /* Set Destination Base Address */ + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ /* Set Destination DMAConfig = DMA Enable, Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - IDLE; /* Wait for DMA to Complete */ +WAIT_DMA_DONE: + p0.h = hi(MDMA_D0_IRQ_STATUS); + p0.l = lo(MDMA_D0_IRQ_STATUS); + R0 = W[P0](Z); + CC = BITTST(R0, 0); + if ! CC jump WAIT_DMA_DONE R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ -copy_end: nop; + /* Write 1 to clear DMA interrupt */ + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Initialize BSS Section with 0 s */ p1.l = __bss_start; @@ -433,3 +311,6 @@ reset_end: nop; _exit: jump.s _exit; +get_pc: + r0 = rets; + rts; diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S index 6f48124..6d4731b 100644 --- a/cpu/bf533/start1.S +++ b/cpu/bf533/start1.S @@ -1,7 +1,7 @@ /* * U-boot - start1.S Code running out of RAM after relocation * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,14 +18,14 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY #include <linux/config.h> -#include <asm/blackfin.h> #include <config.h> +#include <asm/blackfin.h> .global start1; .global _start1; @@ -34,5 +34,5 @@ _start1: start1: sp += -12; - call board_init_f; + call _board_init_f; sp += 12; diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c index 37470d5..19b1fde 100644 --- a/cpu/bf533/traps.c +++ b/cpu/bf533/traps.c @@ -1,7 +1,7 @@ /* * U-boot - traps.c Routines related to interrupts and exceptions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * No original Copyright holder listed, @@ -29,8 +29,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -39,9 +39,11 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/traps.h> -#include <asm/page.h> #include <asm/machdep.h> #include "cpu.h" +#include <asm/arch/anomaly.h> +#include <asm/cplb.h> +#include <asm/io.h> void init_IRQ(void) { @@ -51,23 +53,187 @@ void init_IRQ(void) void process_int(unsigned long vec, struct pt_regs *fp) { + printf("interrupt\n"); return; } +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +unsigned long last_cplb_fault_retx; + +static unsigned int cplb_sizes[4] = + { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; + +void trap_c(struct pt_regs *regs) +{ + unsigned int addr; + unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE; + unsigned int i, j, size, *I0, *I1; + unsigned short data = 0; + + switch (trapnr) { + /* 0x26 - Data CPLB Miss */ + case VEC_CPLB_M: + +#ifdef ANOMALY_05000261 + /* + * Work around an anomaly: if we see a new DCPLB fault, + * return without doing anything. Then, + * if we get the same fault again, handle it. + */ + addr = last_cplb_fault_retx; + last_cplb_fault_retx = regs->retx; + printf("this time, curr = 0x%08x last = 0x%08x\n", + addr, last_cplb_fault_retx); + if (addr != last_cplb_fault_retx) + goto trap_c_return; +#endif + data = 1; + + case VEC_CPLB_I_M: + + if (data) { + addr = *(unsigned int *)pDCPLB_FAULT_ADDR; + } else { + addr = *(unsigned int *)pICPLB_FAULT_ADDR; + } + for (i = 0; i < page_descriptor_table_size; i++) { + if (data) { + size = cplb_sizes[dcplb_table[i][1] >> 16]; + j = dcplb_table[i][0]; + } else { + size = cplb_sizes[icplb_table[i][1] >> 16]; + j = icplb_table[i][0]; + } + if ((j <= addr) && ((j + size) > addr)) { + debug("found %i 0x%08x\n", i, j); + break; + } + } + if (i == page_descriptor_table_size) { + printf("something is really wrong\n"); + do_reset(NULL, 0, 0, NULL); + } + + /* Turn the cache off */ + if (data) { + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + sync(); + } + + if (data) { + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + j = 0; + while (*I1 & CPLB_LOCK) { + debug("skipping %i %08p - %08x\n", j, I1, *I1); + *I0++; + *I1++; + j++; + } + + debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); + + for (; j < 15; j++) { + debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); + *I0++ = *(I0 + 1); + *I1++ = *(I1 + 1); + } + + if (data) { + *I0 = dcplb_table[i][0]; + *I1 = dcplb_table[i][1]; + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + *I0 = icplb_table[i][0]; + *I1 = icplb_table[i][1]; + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + for (j = 0; j < 16; j++) { + debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); + } + + /* Turn the cache back on */ + if (data) { + j = *(unsigned int *)DMEM_CONTROL; + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + sync(); + } + + break; + default: + /* All traps come here */ + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); + dump(regs); + printf("\n\n"); + + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); + do_reset(NULL, 0, 0, NULL); + } + + return; + +} + void dump(struct pt_regs *fp) { - printf("PC: %08lx\n", fp->pc); - printf("SEQSTAT: %08lx SP: %08lx\n", (long) fp->seqstat, - (long) fp); - printf("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", - fp->r0, fp->r1, fp->r2, fp->r3); - printf("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", - fp->r4, fp->r5, fp->r6, fp->r7); - printf("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", - fp->p0, fp->p1, fp->p2, fp->p3); - printf("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, - fp->fp); - printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - printf("\n"); + debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", + fp->rete, fp->retn, fp->retx, fp->rets); + debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); + debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); + debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + debug("P4: %08lx P5: %08lx FP: %08lx\n", + fp->p4, fp->p5, fp->fp); + debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", + fp->lb0, fp->lt0, fp->lc0); + debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", + fp->lb1, fp->lt1, fp->lc1); + debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", + fp->b0, fp->l0, fp->m0, fp->i0); + debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", + fp->b1, fp->l1, fp->m1, fp->i1); + debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", + fp->b2, fp->l2, fp->m2, fp->i2); + debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", + fp->b3, fp->l3, fp->m3, fp->i3); + + debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); + debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); + } diff --git a/cpu/bf533/video.c b/cpu/bf533/video.c new file mode 100644 index 0000000..3ff0151 --- /dev/null +++ b/cpu/bf533/video.c @@ -0,0 +1,194 @@ +/* + * (C) Copyright 2000 + * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it + * (C) Copyright 2002 + * Wolfgang Denk, wd@denx.de + * (C) Copyright 2006 + * Aubrey Li, aubrey.li@analog.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdarg.h> +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <i2c.h> +#include <linux/types.h> +#include <devices.h> + +#ifdef CONFIG_VIDEO +#define NTSC_FRAME_ADDR 0x06000000 +#include "video.h" + +/* NTSC OUTPUT SIZE 720 * 240 */ +#define VERTICAL 2 +#define HORIZONTAL 4 + +int is_vblank_line(const int line) +{ + /* + * This array contains a single bit for each line in + * an NTSC frame. + */ + if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) + return true; + + return false; +} + +int NTSC_framebuffer_init(char *base_address) +{ + const int NTSC_frames = 1; + const int NTSC_lines = 525; + char *dest = base_address; + int frame_num, line_num; + + for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { + for (line_num = 1; line_num <= NTSC_lines; ++line_num) { + unsigned int code; + int offset = 0; + int i; + + if (is_vblank_line(line_num)) + offset++; + + if (line_num > 266 || line_num < 3) + offset += 2; + + /* Output EAV code */ + code = SystemCodeMap[offset].EAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output horizontal blanking */ + for (i = 0; i < 67 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + + /* Output SAV */ + code = SystemCodeMap[offset].SAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output empty horizontal data */ + for (i = 0; i < 360 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + } + } + + return dest - base_address; +} + +void fill_frame(char *Frame, int Value) +{ + int *OddPtr32; + int OddLine; + int *EvenPtr32; + int EvenLine; + int i; + int *data; + int m, n; + + /* fill odd and even frames */ + for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { + OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); + EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); + for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { + *OddPtr32 = Value; + *EvenPtr32 = Value; + } + } + + for (m = 0; m < VERTICAL; m++) { + data = (int *)u_boot_logo.data; + for (OddLine = (22 + m), EvenLine = (285 + m); + OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); + OddLine += VERTICAL, EvenLine += VERTICAL) { + OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); + EvenPtr32 = + (int *)((Frame + ((EvenLine) * 1716)) + 276); + for (i = 0; i < u_boot_logo.width / 2; i++) { + /* enlarge one pixel to m x n */ + for (n = 0; n < HORIZONTAL; n++) { + *OddPtr32++ = *data; + *EvenPtr32++ = *data; + } + data++; + } + } + } +} + +void video_putc(const char c) +{ +} + +void video_puts(const char *s) +{ +} + +static int video_init(void) +{ + char *NTSCFrame; + NTSCFrame = (char *)NTSC_FRAME_ADDR; + NTSC_framebuffer_init(NTSCFrame); + fill_frame(NTSCFrame, BLUE); + + *pPPI_CONTROL = 0x0082; + *pPPI_FRAME = 0x020D; + + *pDMA0_START_ADDR = NTSCFrame; + *pDMA0_X_COUNT = 0x035A; + *pDMA0_X_MODIFY = 0x0002; + *pDMA0_Y_COUNT = 0x020D; + *pDMA0_Y_MODIFY = 0x0002; + *pDMA0_CONFIG = 0x1015; + *pPPI_CONTROL = 0x0083; + return 0; +} + +int drv_video_init(void) +{ + int error, devices = 1; + + device_t videodev; + + video_init(); /* Video initialization */ + + memset(&videodev, 0, sizeof(videodev)); + + strcpy(videodev.name, "video"); + videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ + videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ + videodev.putc = video_putc; /* 'putc' function */ + videodev.puts = video_puts; /* 'puts' function */ + + error = device_register(&videodev); + + return (error == 0) ? devices : error; +} +#endif diff --git a/cpu/bf533/video.h b/cpu/bf533/video.h new file mode 100644 index 0000000..d237f6a --- /dev/null +++ b/cpu/bf533/video.h @@ -0,0 +1,25 @@ +#include <video_logo.h> +#define write_dest_byte(val) {*dest++=val;} +#define BLACK (0x01800180) /* black pixel pattern */ +#define BLUE (0x296E29F0) /* blue pixel pattern */ +#define RED (0x51F0515A) /* red pixel pattern */ +#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern */ +#define GREEN (0x91229136) /* green pixel pattern */ +#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ +#define YELLOW (0xD292D210) /* yellow pixel pattern */ +#define WHITE (0xFE80FE80) /* white pixel pattern */ + +#define true 1 +#define false 0 + +typedef struct { + unsigned int SAV; + unsigned int EAV; +} SystemCodeType; + +const SystemCodeType SystemCodeMap[4] = { + {0xFF000080, 0xFF00009D}, + {0xFF0000AB, 0xFF0000B6}, + {0xFF0000C7, 0xFF0000DA}, + {0xFF0000EC, 0xFF0000F1} +}; |