diff options
Diffstat (limited to 'cpu/bf533/start.S')
| -rw-r--r-- | cpu/bf533/start.S | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S deleted file mode 100644 index c32fef6..0000000 --- a/cpu/bf533/start.S +++ /dev/null @@ -1,313 +0,0 @@ -/* - * U-boot - start.S Startup file of u-boot for BF533/BF561 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on head.S - * Copyright (c) 2003 Metrowerks/Motorola - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Note: A change in this file subsequently requires a change in - * board/$(board_name)/config.mk for a valid u-boot.bin - */ - -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> -#include <asm/mach-common/bits/pll.h> - -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global edata; -.global _exit; -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -.text -_start: -start: -_stext: - - R0 = 0x32; - SYSCFG = R0; - SSYNC; - - /* As per HW reference manual DAG registers, - * DATA and Address resgister shall be zero'd - * in initialization, after a reset state - */ - r1 = 0; /* Data registers zero'd */ - r2 = 0; - r3 = 0; - r4 = 0; - r5 = 0; - r6 = 0; - r7 = 0; - - p0 = 0; /* Address registers zero'd */ - p1 = 0; - p2 = 0; - p3 = 0; - p4 = 0; - p5 = 0; - - i0 = 0; /* DAG Registers zero'd */ - i1 = 0; - i2 = 0; - i3 = 0; - m0 = 0; - m1 = 0; - m3 = 0; - m3 = 0; - l0 = 0; - l1 = 0; - l2 = 0; - l3 = 0; - b0 = 0; - b1 = 0; - b2 = 0; - b3 = 0; - - /* Set loop counters to zero, to make sure that - * hw loops are disabled. - */ - r0 = 0; - lc0 = r0; - lc1 = r0; - - SSYNC; - - /* Check soft reset status */ - p0.h = SWRST >> 16; - p0.l = SWRST & 0xFFFF; - r0.l = w[p0]; - - cc = bittst(r0, 15); - if !cc jump no_soft_reset; - - /* Clear Soft reset */ - r0 = 0x0000; - w[p0] = r0; - ssync; - -no_soft_reset: - nop; - - /* Clear EVT registers */ - p0.h = (EVT0 >> 16); - p0.l = (EVT0 & 0xFFFF); - p0 += 8; - p1 = 14; - r1 = 0; - LSETUP(4,4) lc0 = p1; - [ p0 ++ ] = r1; - - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - sp.l = (0xffb01000 & 0xFFFF); - sp.h = (0xffb01000 >> 16); - - call init_sdram; - - /* relocate into to RAM */ - call get_pc; -offset: - r2.l = offset; - r2.h = offset; - r3.l = start; - r3.h = start; - r1 = r2 - r3; - - r0 = r0 - r1; - p1 = r0; - - p2.l = (CFG_MONITOR_BASE & 0xffff); - p2.h = (CFG_MONITOR_BASE >> 16); - - p3 = 0x04; - p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); - p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); -loop1: - r1 = [p1 ++ p3]; - [p2 ++ p3] = r1; - cc=p2==p4; - if !cc jump loop1; - /* - * configure STACK - */ - r0.h = (CONFIG_STACKBASE >> 16); - r0.l = (CONFIG_STACKBASE & 0xFFFF); - sp = r0; - fp = sp; - - /* - * This next section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* To keep ourselves in the supervisor mode */ - p0.l = (EVT15 & 0xFFFF); - p0.h = (EVT15 >> 16); - - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - - p0.l = (IMASK & 0xFFFF); - p0.h = (IMASK >> 16); - r0.l = LO(EVT_IVG15); - r0.h = HI(EVT_IVG15); - [p0] = r0; - raise 15; - p0.l = WAIT_HERE; - p0.h = WAIT_HERE; - reti = p0; - rti; - -WAIT_HERE: - jump WAIT_HERE; - -.global _real_start; -_real_start: - [ -- sp ] = reti; - - /* DMA reset code to Hi of L1 SRAM */ -copy: - /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.H = hi(SYSMMR_BASE); - P1.L = lo(SYSMMR_BASE); - - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - /* Destination DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); - -DMA: - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - /* Set Destination Base Address */ - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -WAIT_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump WAIT_DMA_DONE - - R0 = 0x1; - - /* Write 1 to clear DMA interrupt */ - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; - - /* Initialize BSS Section with 0 s */ - p1.l = __bss_start; - p1.h = __bss_start; - p2.l = _end; - p2.h = _end; - r1 = p1; - r2 = p2; - r3 = r2 - r1; - r3 = r3 >> 2; - p3 = r3; - lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; - CC = p2<=p1; - if CC jump _clear_bss_skip; - r0 = 0; -_clear_bss: -_clear_bss_end: - [p1++] = r0; -_clear_bss_skip: - - p0.l = _start1; - p0.h = _start1; - jump (p0); - -reset_start: - p0.h = WDOG_CNT >> 16; - p0.l = WDOG_CNT & 0xffff; - r0 = 0x0010; - w[p0] = r0; - p0.h = WDOG_CTL >> 16; - p0.l = WDOG_CTL & 0xffff; - r0 = 0x0000; - w[p0] = r0; -reset_wait: - jump reset_wait; - -reset_end: nop; - -_exit: - jump.s _exit; -get_pc: - r0 = rets; - rts; |