summaryrefslogtreecommitdiff
path: root/cpu/bf533/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/bf533/serial.c')
-rw-r--r--cpu/bf533/serial.c186
1 files changed, 0 insertions, 186 deletions
diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c
deleted file mode 100644
index 05fcfcc..0000000
--- a/cpu/bf533/serial.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * U-boot - serial.c Serial driver for BF533
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * This file is based on
- * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART.
- * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>,
- * BuyWays B.V. (www.buyways.nl)
- *
- * Based heavily on blkfinserial.c
- * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
- * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com>
- * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com>
- * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
- *
- * Based on code from 68328 version serial driver imlpementation which was:
- * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <asm/system.h>
-#include <asm/bitops.h>
-#include <asm/delay.h>
-#include <asm/io.h>
-#include "bf533_serial.h"
-#include <asm/mach-common/bits/uart.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-unsigned long pll_div_fact;
-
-void calc_baud(void)
-{
- unsigned char i;
- int temp;
- u_long sclk = get_sclk();
-
- for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
- temp = sclk / (baud_table[i] * 8);
- if ((temp & 0x1) == 1) {
- temp++;
- }
- temp = temp / 2;
- hw_baud_table[i].dl_high = (temp >> 8) & 0xFF;
- hw_baud_table[i].dl_low = (temp) & 0xFF;
- }
-}
-
-void serial_setbrg(void)
-{
- int i;
-
- calc_baud();
-
- for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
- if (gd->baudrate == baud_table[i])
- break;
- }
-
- /* Enable UART */
- *pUART_GCTL |= UCEN;
- SSYNC();
-
- /* Set DLAB in LCR to Access DLL and DLH */
- ACCESS_LATCH;
- SSYNC();
-
- *pUART_DLL = hw_baud_table[i].dl_low;
- SSYNC();
- *pUART_DLH = hw_baud_table[i].dl_high;
- SSYNC();
-
- /* Clear DLAB in LCR to Access THR RBR IER */
- ACCESS_PORT_IER;
- SSYNC();
-
- /* Enable ERBFI and ELSI interrupts
- * to poll SIC_ISR register*/
- *pUART_IER = ELSI | ERBFI | ETBEI;
- SSYNC();
-
- /* Set LCR to Word Lengh 8-bit word select */
- *pUART_LCR = WLS_8;
- SSYNC();
-
- return;
-}
-
-int serial_init(void)
-{
- serial_setbrg();
- return (0);
-}
-
-void serial_putc(const char c)
-{
- if ((*pUART_LSR) & TEMT) {
- if (c == '\n')
- serial_putc('\r');
-
- local_put_char(c);
- }
-
- while (!((*pUART_LSR) & TEMT))
- SYNC_ALL;
-
- return;
-}
-
-int serial_tstc(void)
-{
- if (*pUART_LSR & DR)
- return 1;
- else
- return 0;
-}
-
-int serial_getc(void)
-{
- unsigned short uart_lsr_val, uart_rbr_val;
- unsigned long isr_val;
- int ret;
-
- /* Poll for RX Interrupt */
- while (!serial_tstc())
- continue;
- asm("csync;");
-
- uart_lsr_val = *pUART_LSR; /* Clear status bit */
- uart_rbr_val = *pUART_RBR; /* getc() */
-
- if (uart_lsr_val & (OE|PE|FE|BI)) {
- ret = -1;
- } else {
- ret = uart_rbr_val & 0xff;
- }
-
- return ret;
-}
-
-void serial_puts(const char *s)
-{
- while (*s) {
- serial_putc(*s++);
- }
-}
-
-static void local_put_char(char ch)
-{
- int flags = 0;
- unsigned long isr_val;
-
- /* Poll for TX Interruput */
- while (!(*pUART_LSR & THRE))
- continue;
- asm("csync;");
-
- *pUART_THR = ch; /* putc() */
-
- return;
-}