diff options
Diffstat (limited to 'cpu/arm926ejs')
| -rw-r--r-- | cpu/arm926ejs/at91/at91sam9260_devices.c | 2 | ||||
| -rw-r--r-- | cpu/arm926ejs/davinci/Makefile | 1 | ||||
| -rw-r--r-- | cpu/arm926ejs/davinci/dm365.c | 35 | ||||
| -rw-r--r-- | cpu/arm926ejs/kirkwood/cpu.c | 75 | ||||
| -rw-r--r-- | cpu/arm926ejs/mx27/generic.c | 65 |
5 files changed, 177 insertions, 1 deletions
diff --git a/cpu/arm926ejs/at91/at91sam9260_devices.c b/cpu/arm926ejs/at91/at91sam9260_devices.c index 5309ba2..f86cb99 100644 --- a/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -75,7 +75,7 @@ void at91_serial_hw_init(void) #endif } -#ifdef CONFIG_HAS_DATAFLASH +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ diff --git a/cpu/arm926ejs/davinci/Makefile b/cpu/arm926ejs/davinci/Makefile index e45ad25..7501a85 100644 --- a/cpu/arm926ejs/davinci/Makefile +++ b/cpu/arm926ejs/davinci/Makefile @@ -29,6 +29,7 @@ LIB = $(obj)lib$(SOC).a COBJS-y += cpu.o timer.o psc.o COBJS-$(CONFIG_SOC_DM355) += dm355.o +COBJS-$(CONFIG_SOC_DM365) += dm365.o COBJS-$(CONFIG_SOC_DM644X) += dm644x.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o diff --git a/cpu/arm926ejs/davinci/dm365.c b/cpu/arm926ejs/davinci/dm365.c new file mode 100644 index 0000000..56c1bc0 --- /dev/null +++ b/cpu/arm926ejs/davinci/dm365.c @@ -0,0 +1,35 @@ +/* + * SoC-specific code for tms320dm365 and similar chips + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +void davinci_enable_uart0(void) +{ + lpsc_on(DAVINCI_LPSC_UART0); +} + +#ifdef CONFIG_DRIVER_DAVINCI_I2C +void davinci_enable_i2c(void) +{ + lpsc_on(DAVINCI_LPSC_I2C); +} +#endif diff --git a/cpu/arm926ejs/kirkwood/cpu.c b/cpu/arm926ejs/kirkwood/cpu.c index 795a739..bab5faf 100644 --- a/cpu/arm926ejs/kirkwood/cpu.c +++ b/cpu/arm926ejs/kirkwood/cpu.c @@ -195,6 +195,78 @@ int kw_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23, u32 mpp24_31, return 0; } +/* + * SYSRSTn Duration Counter Support + * + * Kirkwood SoC implements a hardware-based SYSRSTn duration counter. + * When SYSRSTn is asserted low, a SYSRSTn duration counter is running. + * The SYSRSTn duration counter is useful for implementing a manufacturer + * or factory reset. Upon a long reset assertion that is greater than a + * pre-configured environment variable value for sysrstdelay, + * The counter value is stored in the SYSRSTn Length Counter Register + * The counter is based on the 25-MHz reference clock (40ns) + * It is a 29-bit counter, yielding a maximum counting duration of + * 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value, + * it remains at this value until counter reset is triggered by setting + * bit 31 of KW_REG_SYSRST_CNT + */ +static void kw_sysrst_action(void) +{ + int ret; + char *s = getenv("sysrstcmd"); + + if (!s) { + debug("Error.. %s failed, check sysrstcmd\n", + __FUNCTION__); + return; + } + + debug("Starting %s process...\n", __FUNCTION__); +#if !defined(CONFIG_SYS_HUSH_PARSER) + ret = run_command (s, 0); +#else + ret = parse_string_outer(s, FLAG_PARSE_SEMICOLON + | FLAG_EXIT_FROM_LOOP); +#endif + if (ret < 0) + debug("Error.. %s failed\n", __FUNCTION__); + else + debug("%s process finished\n", __FUNCTION__); +} + +static void kw_sysrst_check(void) +{ + u32 sysrst_cnt, sysrst_dly; + char *s; + + /* + * no action if sysrstdelay environment variable is not defined + */ + s = getenv("sysrstdelay"); + if (s == NULL) + return; + + /* read sysrstdelay value */ + sysrst_dly = (u32) simple_strtoul(s, NULL, 10); + + /* read SysRst Length counter register (bits 28:0) */ + sysrst_cnt = (0x1fffffff & readl(KW_REG_SYSRST_CNT)); + debug("H/w Rst hold time: %d.%d secs\n", + sysrst_cnt / SYSRST_CNT_1SEC_VAL, + sysrst_cnt % SYSRST_CNT_1SEC_VAL); + + /* clear the counter for next valid read*/ + writel(1 << 31, KW_REG_SYSRST_CNT); + + /* + * sysrst_action: + * if H/w Reset key is pressed and hold for time + * more than sysrst_dly in seconds + */ + if (sysrst_cnt >= SYSRST_CNT_1SEC_VAL * sysrst_dly) + kw_sysrst_action(); +} + #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) { @@ -298,6 +370,9 @@ int arch_misc_init(void) temp = get_cr(); set_cr(temp & ~CR_V); + /* checks and execute resset to factory event */ + kw_sysrst_check(); + return 0; } #endif /* CONFIG_ARCH_MISC_INIT */ diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c index 9b4ff02..808371f 100644 --- a/cpu/arm926ejs/mx27/generic.c +++ b/cpu/arm926ejs/mx27/generic.c @@ -264,3 +264,68 @@ void imx_gpio_mode(int gpio_mode) ®s->port[port].iconfb2); } } + +#ifdef CONFIG_MXC_UART +void mx27_uart_init_pins(void) +{ + int i; + unsigned int mode[] = { + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + }; + + for (i = 0; i < ARRAY_SIZE(mode); i++) + imx_gpio_mode(mode[i]); + +} +#endif /* CONFIG_MXC_UART */ + +#ifdef CONFIG_FEC_MXC +void mx27_fec_init_pins(void) +{ + int i; + unsigned int mode[] = { + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC | GPIO_PUEN, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_CLR, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + }; + + for (i = 0; i < ARRAY_SIZE(mode); i++) + imx_gpio_mode(mode[i]); +} +#endif /* CONFIG_FEC_MXC */ + +#ifdef CONFIG_MXC_MMC +void mx27_sd2_init_pins(void) +{ + int i; + unsigned int mode[] = { + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, + }; + + for (i = 0; i < ARRAY_SIZE(mode); i++) + imx_gpio_mode(mode[i]); + +} +#endif /* CONFIG_MXC_MMC */ + |