diff options
Diffstat (limited to 'cpu/arm926ejs/mx23/spi.c')
| -rw-r--r-- | cpu/arm926ejs/mx23/spi.c | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/cpu/arm926ejs/mx23/spi.c b/cpu/arm926ejs/mx23/spi.c new file mode 100644 index 0000000..b785918 --- /dev/null +++ b/cpu/arm926ejs/mx23/spi.c @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2008 Embedded Alley Solutions Inc. + * + * (C) Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * Freescale MX23 SSP/SPI driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <asm/arch/spi.h> + +#define SPI_NUM_BUSES 2 +#define SPI_NUM_SLAVES 3 + +/* Initalized in spi_init() depending on SSP port configuration */ +static unsigned long ssp_bases[SPI_NUM_BUSES]; + +/* Set in spi_set_cfg() depending on which SSP port is being used */ +static unsigned long ssp_base = SSP1_BASE; + +/* + * Init SSP port: SSP1 (@bus = 0) or SSP2 (@bus == 1) + */ +static void ssp_spi_init(unsigned int bus) +{ + u32 spi_div; + u32 val = 0; + + if (bus >= SPI_NUM_BUSES) { + printf("SPI bus %d doesn't exist\n", bus); + return; + } + + ssp_base = ssp_bases[bus]; + + /* Reset block */ + + /* Clear SFTRST */ + REG_CLR(ssp_base + SSP_CTRL0, CTRL0_SFTRST); + while (REG_RD(ssp_base + SSP_CTRL0) & CTRL0_SFTRST) + ; + + /* Clear CLKGATE */ + REG_CLR(ssp_base + SSP_CTRL0, CTRL0_CLKGATE); + + /* Set SFTRST and wait until CLKGATE is set */ + REG_SET(ssp_base + SSP_CTRL0, CTRL0_SFTRST); + while (!(REG_RD(ssp_base + SSP_CTRL0) & CTRL0_CLKGATE)) + ; + + /* Clear SFTRST and CLKGATE */ + REG_CLR(ssp_base + SSP_CTRL0, CTRL0_SFTRST); + REG_CLR(ssp_base + SSP_CTRL0, CTRL0_CLKGATE); + + /* + * Set CLK to desired value + */ + + spi_div = ((CONFIG_SSP_CLK>>1) + CONFIG_SPI_CLK - 1) / CONFIG_SPI_CLK; + val = (2 << TIMING_CLOCK_DIVIDE) | ((spi_div - 1) << TIMING_CLOCK_RATE); + REG_WR(ssp_base + SSP_TIMING, val); + + /* Set transfer parameters */ + + /* Set SSP SPI Master mode and word length to 8 bit */ + REG_WR(ssp_base + SSP_CTRL1, WORD_LENGTH8 | SSP_MODE_SPI); + + /* Set BUS_WIDTH to 1 bit and XFER_COUNT to 1 byte */ + REG_WR(ssp_base + SSP_CTRL0, + BUS_WIDTH_SPI1 | (0x1 << CTRL0_XFER_COUNT)); + + /* + * Set BLOCK_SIZE and BLOCK_COUNT to 0, so that XFER_COUNT + * reflects number of bytes to send. Disalbe other bits as + * well + */ + REG_WR(ssp_base + SSP_CMD0, 0x0); +} + +/* + * Init SSP ports, must be called first and only once + */ +void spi_init(void) +{ +#ifdef CONFIG_SPI_SSP1 + ssp_bases[0] = SSP1_BASE; + ssp_spi_init(0); +#endif + +#ifdef CONFIG_SPI_SSP2 + ssp_bases[1] = SSP2_BASE; + ssp_spi_init(1); +#endif +} + +void spi_set_cfg(unsigned int bus, unsigned int cs, unsigned long mode) +{ + u32 clr_mask = 0; + u32 set_mask = 0; + + if (bus >= SPI_NUM_BUSES || cs >= SPI_NUM_SLAVES) { + printf("SPI device %d:%d doesn't exist", bus, cs); + return; + } + + if (ssp_bases[bus] == 0) { + printf("SSP port %d isn't in SPI mode\n", bus + 1); + return; + } + + /* Set SSP port to use */ + ssp_base = ssp_bases[bus]; + + /* Set phase and polarity: HW_SSP_CTRL1 */ + if (mode & SPI_PHASE) + set_mask |= CTRL1_PHASE; + else + clr_mask |= CTRL1_PHASE; + + if (mode & SPI_POLARITY) + set_mask |= CTRL1_POLARITY; + else + clr_mask |= CTRL1_POLARITY; + + REG_SET(ssp_base + SSP_CTRL1, set_mask); + REG_CLR(ssp_base + SSP_CTRL1, clr_mask); + + /* Set SSn number: HW_SSP_CTRL0 */ + REG_CLR(ssp_base + SSP_CTRL0, SPI_CS_CLR_MASK); + + switch (cs) { + case 0: + set_mask = SPI_CS0; + break; + case 1: + set_mask = SPI_CS1; + break; + case 2: + set_mask = SPI_CS2; + break; + } + + REG_SET(ssp_base + SSP_CTRL0, set_mask); +} + +/* Read single data byte */ +static unsigned char spi_read(void) +{ + unsigned char b = 0; + + /* Set XFER_LENGTH to 1 */ + REG_CLR(ssp_base + SSP_CTRL0, 0xffff); + REG_SET(ssp_base + SSP_CTRL0, 1); + + /* Enable READ mode */ + REG_SET(ssp_base + SSP_CTRL0, CTRL0_READ); + + /* Set RUN bit */ + REG_SET(ssp_base + SSP_CTRL0, CTRL0_RUN); + + + /* Set transfer */ + REG_SET(ssp_base + SSP_CTRL0, CTRL0_DATA_XFER); + + while (REG_RD(ssp_base + SSP_STATUS) & STATUS_FIFO_EMPTY) + ; + + /* Read data byte */ + b = REG_RD(ssp_base + SSP_DATA) & 0xff; + + /* Wait until RUN bit is cleared */ + while (REG_RD(ssp_base + SSP_CTRL0) & CTRL0_RUN) + ; + + return b; +} + +/* Write single data byte */ +static void spi_write(unsigned char b) +{ + /* Set XFER_LENGTH to 1 */ + REG_CLR(ssp_base + SSP_CTRL0, 0xffff); + REG_SET(ssp_base + SSP_CTRL0, 1); + + /* Enable WRITE mode */ + REG_CLR(ssp_base + SSP_CTRL0, CTRL0_READ); + + /* Set RUN bit */ + REG_SET(ssp_base + SSP_CTRL0, CTRL0_RUN); + + /* Write data byte */ + REG_WR(ssp_base + SSP_DATA, b); + + /* Set transfer */ + REG_SET(ssp_base + SSP_CTRL0, CTRL0_DATA_XFER); + + /* Wait until RUN bit is cleared */ + while (REG_RD(ssp_base + SSP_CTRL0) & CTRL0_RUN) + ; +} + +static void spi_lock_cs(void) +{ + REG_CLR(ssp_base + SSP_CTRL0, CTRL0_IGNORE_CRC); + REG_SET(ssp_base + SSP_CTRL0, CTRL0_LOCK_CS); +} + +static void spi_unlock_cs(void) +{ + REG_CLR(ssp_base + SSP_CTRL0, CTRL0_LOCK_CS); + REG_SET(ssp_base + SSP_CTRL0, CTRL0_IGNORE_CRC); +} + +void spi_txrx(const char *dout, unsigned int tx_len, char *din, + unsigned int rx_len, unsigned long flags) +{ + int i; + + if (tx_len == 0 && rx_len == 0) + return; + + if (flags & SPI_START) + spi_lock_cs(); + + for (i = 0; i < tx_len; i++) { + + /* Check if it is last data byte to transfer */ + if (flags & SPI_STOP && rx_len == 0 && i == tx_len - 1) + spi_unlock_cs(); + + spi_write(dout[i]); + } + + for (i = 0; i < rx_len; i++) { + + /* Check if it is last data byte to transfer */ + if (flags & SPI_STOP && i == rx_len - 1) + spi_unlock_cs(); + + din[i] = spi_read(); + } +} |