diff options
Diffstat (limited to 'cpu/arm926ejs/davinci/psc.c')
| -rw-r--r-- | cpu/arm926ejs/davinci/psc.c | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/cpu/arm926ejs/davinci/psc.c b/cpu/arm926ejs/davinci/psc.c new file mode 100644 index 0000000..28e2a4b --- /dev/null +++ b/cpu/arm926ejs/davinci/psc.c @@ -0,0 +1,182 @@ +/* + * Power and Sleep Controller (PSC) functions. + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * Copyright (C) 2004 Texas Instruments. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +#define PINMUX0_EMACEN (1 << 31) +#define PINMUX0_AECS5 (1 << 11) +#define PINMUX0_AECS4 (1 << 10) + +#define PINMUX1_I2C (1 << 7) +#define PINMUX1_UART1 (1 << 1) +#define PINMUX1_UART0 (1 << 0) + +/* + * The DM6446 includes two separate power domains: "Always On" and "DSP". The + * "Always On" power domain is always on when the chip is on. The "Always On" + * domain is powered by the VDD pins of the DM6446. The majority of the + * DM6446's modules lie within the "Always On" power domain. A separate + * domain called the "DSP" domain houses the C64x+ and VICP. The "DSP" domain + * is not always on. The "DSP" power domain is powered by the CVDDDSP pins of + * the DM6446. + */ + +/* Works on Always On power domain only (no PD argument) */ +void lpsc_on(unsigned int id) +{ + dv_reg_p mdstat, mdctl; + + if (id >= DAVINCI_LPSC_GEM) + return; /* Don't work on DSP Power Domain */ + + mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); + mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); + + while (REG(PSC_PTSTAT) & 0x01); + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + /* Special treatment for some modules as for sprue14 p.7.4.2 */ + switch (id) { + case DAVINCI_LPSC_VPSSSLV: + case DAVINCI_LPSC_EMAC: + case DAVINCI_LPSC_EMAC_WRAPPER: + case DAVINCI_LPSC_MDIO: + case DAVINCI_LPSC_USB: + case DAVINCI_LPSC_ATA: + case DAVINCI_LPSC_VLYNQ: + case DAVINCI_LPSC_UHPI: + case DAVINCI_LPSC_DDR_EMIF: + case DAVINCI_LPSC_AEMIF: + case DAVINCI_LPSC_MMC_SD: + case DAVINCI_LPSC_MEMSTICK: + case DAVINCI_LPSC_McBSP: + case DAVINCI_LPSC_GPIO: + *mdctl |= 0x200; + break; + } + + REG(PSC_PTCMD) = 0x01; + + while (REG(PSC_PTSTAT) & 0x03); + while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */ +} + +/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */ +#if !defined(CONFIG_SYS_USE_DSPLINK) +void dsp_on(void) +{ + int i; + + if (REG(PSC_PDSTAT1) & 0x1f) + return; /* Already on */ + + REG(PSC_GBLCTL) |= 0x01; + REG(PSC_PDCTL1) |= 0x01; + REG(PSC_PDCTL1) &= ~0x100; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; + REG(PSC_PTCMD) = 0x02; + + for (i = 0; i < 100; i++) { + if (REG(PSC_EPCPR) & 0x02) + break; + } + + REG(PSC_CHP_SHRTSW) = 0x01; + REG(PSC_PDCTL1) |= 0x100; + REG(PSC_EPCCR) = 0x02; + + for (i = 0; i < 100; i++) { + if (!(REG(PSC_PTSTAT) & 0x02)) + break; + } + + REG(PSC_GBLCTL) &= ~0x1f; +} +#endif /* CONFIG_SYS_USE_DSPLINK */ + +void davinci_enable_uart0(void) +{ + lpsc_on(DAVINCI_LPSC_UART0); + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x0000e003; + + /* Enable UART0 MUX lines */ + REG(PINMUX1) |= PINMUX1_UART0; +} + +#ifdef CONFIG_DRIVER_TI_EMAC +void davinci_enable_emac(void) +{ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable EMAC. */ + REG(PINMUX0) |= PINMUX0_EMACEN; +} +#endif + +void davinci_enable_i2c(void) +{ + lpsc_on(DAVINCI_LPSC_I2C); + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= PINMUX1_I2C; +} + +void davinci_errata_workarounds(void) +{ + /* + * Workaround for TMS320DM6446 errata 1.3.22: + * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset + * Revision(s) Affected: 1.3 and earlier + */ + REG(PSC_SILVER_BULLET) = 0; + + /* + * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR) + * as suggested in TMS320DM6446 errata 2.1.2: + * + * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions + * low priority modules can occupy the bus and prevent high priority + * modules like the VPSS from getting the required DDR2 throughput. + * A hex value of 0x20 should provide a good ARM (cache enabled) + * performance and still allow good utilization by the VPSS or other + * modules. + */ + REG(VBPR) = 0x20; +} |