summaryrefslogtreecommitdiff
path: root/cpu/arm920t/s3c24x0/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/arm920t/s3c24x0/serial.c')
-rw-r--r--cpu/arm920t/s3c24x0/serial.c164
1 files changed, 143 insertions, 21 deletions
diff --git a/cpu/arm920t/s3c24x0/serial.c b/cpu/arm920t/s3c24x0/serial.c
index 36851ad..6e853b8 100644
--- a/cpu/arm920t/s3c24x0/serial.c
+++ b/cpu/arm920t/s3c24x0/serial.c
@@ -48,18 +48,74 @@ DECLARE_GLOBAL_DATA_PTR;
#error "Bad: you didn't configure serial ..."
#endif
-void serial_setbrg (void)
+#if defined(CONFIG_SERIAL_MULTI)
+#include <serial.h>
+
+/* Multi serial device functions */
+#define DECLARE_S3C_SERIAL_FUNCTIONS(port) \
+ int s3serial##port##_init (void) {\
+ return serial_init_dev(port);}\
+ void s3serial##port##_setbrg (void) {\
+ serial_setbrg_dev(port);}\
+ int s3serial##port##_getc (void) {\
+ return serial_getc_dev(port);}\
+ int s3serial##port##_tstc (void) {\
+ return serial_tstc_dev(port);}\
+ void s3serial##port##_putc (const char c) {\
+ serial_putc_dev(port, c);}\
+ void s3serial##port##_puts (const char *s) {\
+ serial_puts_dev(port, s);}
+
+#define INIT_S3C_SERIAL_STRUCTURE(port,name,bus) {\
+ name,\
+ bus,\
+ s3serial##port##_init,\
+ s3serial##port##_setbrg,\
+ s3serial##port##_getc,\
+ s3serial##port##_tstc,\
+ s3serial##port##_putc,\
+ s3serial##port##_puts, }
+
+#endif /* CONFIG_SERIAL_MULTI */
+
+void _serial_setbrg(const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
- int i;
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
unsigned int reg = 0;
+ int i;
/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
reg = get_PCLK() / (16 * gd->baudrate) - 1;
+ uart->UBRDIV = reg;
+ for (i = 0; i < 100; i++);
+}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_setbrg_dev(unsigned int dev_index)
+{
+ _serial_setbrg(dev_index);
+}
+#else
+void serial_setbrg(void)
+{
+ _serial_setbrg(UART_NR);
+}
+#endif
+
+
+/* Initialise the serial port. The settings are always 8 data bits, no parity,
+ * 1 stop bit, no start bits.
+ */
+static int serial_init_dev(const int dev_index)
+{
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+ int i;
+
/* FIFO enable, Tx/Rx FIFO clear */
uart->UFCON = 0x07;
uart->UMCON = 0x0;
+
/* Normal,No parity,1 stop,8 bit */
uart->ULCON = 0x3;
/*
@@ -67,40 +123,57 @@ void serial_setbrg (void)
* normal,interrupt or polling
*/
uart->UCON = 0x245;
- uart->UBRDIV = reg;
#ifdef CONFIG_HWFLOW
uart->UMCON = 0x1; /* RTS up */
#endif
- for (i = 0; i < 100; i++);
+
+ /* FIXME: This is sooooooooooooooooooo ugly */
+#if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
+ /* we need auto hw flow control on the gsm and gps port */
+ if (dev_index == 0 || dev_index == 1)
+ uart->UMCON = 0x10;
+#endif
+ _serial_setbrg(dev_index);
+
+ return (0);
}
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
+#if !defined(CONFIG_SERIAL_MULTI)
+/* Initialise the serial port. The settings are always 8 data bits, no parity,
+ * 1 stop bit, no start bits.
*/
int serial_init (void)
{
- serial_setbrg ();
-
- return (0);
+ return serial_init_dev(UART_NR);
}
+#endif
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
-int serial_getc (void)
+int _serial_getc (const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
/* wait for character to arrive */
while (!(uart->UTRSTAT & 0x1));
return uart->URXH & 0xff;
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int serial_getc_dev(unsigned int dev_index)
+{
+ return _serial_getc(dev_index);
+}
+#else
+int serial_getc (void)
+{
+ return _serial_getc(UART_NR);
+}
+#endif
#ifdef CONFIG_HWFLOW
static int hwflow = 0; /* turned off by default */
@@ -138,9 +211,9 @@ void enable_putc(void)
/*
* Output a single byte to the serial port.
*/
-void serial_putc (const char c)
+void _serial_putc (const char c, const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
#ifdef CONFIG_MODEM_SUPPORT
if (be_quiet)
return;
@@ -161,23 +234,72 @@ void serial_putc (const char c)
if (c == '\n')
serial_putc ('\r');
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void serial_putc_dev(unsigned int dev_index, const char c)
+{
+ _serial_putc(c, dev_index);
+}
+#else
+void serial_putc(const char c)
+{
+ _serial_putc(c, UART_NR);
+}
+#endif
+
/*
* Test whether a character is in the RX buffer
*/
-int serial_tstc (void)
+int _serial_tstc(const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
return uart->UTRSTAT & 0x1;
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int
+serial_tstc_dev(unsigned int dev_index)
+{
+ return _serial_tstc(dev_index);
+}
+#else
+int serial_tstc(void)
+{
+ return _serial_tstc(UART_NR);
+}
+#endif
-void
-serial_puts (const char *s)
+void _serial_puts(const char *s, const int dev_index)
{
while (*s) {
- serial_putc (*s++);
+ _serial_putc (*s++, dev_index);
}
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_puts_dev(int dev_index, const char *s)
+{
+ _serial_puts(s, dev_index);
+}
+#else
+void
+serial_puts (const char *s)
+{
+ _serial_puts(s, UART_NR);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+DECLARE_S3C_SERIAL_FUNCTIONS(0);
+struct serial_device s3c24xx_serial0_device =
+ INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
+DECLARE_S3C_SERIAL_FUNCTIONS(1);
+struct serial_device s3c24xx_serial1_device =
+ INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
+DECLARE_S3C_SERIAL_FUNCTIONS(2);
+struct serial_device s3c24xx_serial2_device =
+ INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
+
+#endif /* CONFIG_SERIAL_MULTI */
#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */