summaryrefslogtreecommitdiff
path: root/cpu/arm920t/ks8695/lowlevel_init.S
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/arm920t/ks8695/lowlevel_init.S')
-rw-r--r--cpu/arm920t/ks8695/lowlevel_init.S205
1 files changed, 0 insertions, 205 deletions
diff --git a/cpu/arm920t/ks8695/lowlevel_init.S b/cpu/arm920t/ks8695/lowlevel_init.S
deleted file mode 100644
index e9f1227..0000000
--- a/cpu/arm920t/ks8695/lowlevel_init.S
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * lowlevel_init.S - basic hardware initialization for the KS8695 CPU
- *
- * Copyright (c) 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/platform.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- *************************************************************************
- *
- * Handy dandy macros
- *
- *************************************************************************
- */
-
-/* Delay a bit */
-.macro DELAY_FOR cycles, reg0
- ldr \reg0, =\cycles
- subs \reg0, \reg0, #1
- subne pc, pc, #0xc
-.endm
-
-/*
- *************************************************************************
- *
- * Some local storage.
- *
- *************************************************************************
- */
-
-/* Should we boot with an interactive console or not */
-.globl serial_console
-
-/*
- *************************************************************************
- *
- * Raw hardware initialization code. The important thing is to get
- * SDRAM setup and running. We do some other basic things here too,
- * like getting the PLL set for high speed, and init the LEDs.
- *
- *************************************************************************
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-#if DEBUG
- /*
- * enable UART for early debug trace
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
- mov r2, #0xd9
- str r2, [r1] /* 115200 baud */
- ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
- mov r2, #0x03
- str r2, [r1] /* 8 data bits, no parity, 1 stop */
- ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
- mov r2, #0x41
- str r2, [r1] /* write 'A' */
-#endif
-#if DEBUG
- ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
- mov r2, #0x42
- str r2, [r1]
-#endif
-
- /*
- * remap the memory and flash regions. we want to end up with
- * ram from address 0, and flash at 32MB.
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0)
- ldr r2, =0xbfc00040
- str r2, [r1] /* large flash map */
- ldr pc, =(highflash+0x02000000-0x00f00000) /* jump to high flash address */
-highflash:
- ldr r2, =0x8fe00040
- str r2, [r1] /* remap flash range */
-
- /*
- * remap the second select region to the 4MB immediately after
- * the first region. This way if you have a larger flash (say 8Mb)
- * then you can have it all mapped nicely. Has no effect if you
- * only have a 4Mb or smaller flash.
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL1)
- ldr r2, =0x9fe40040
- str r2, [r1] /* remap flash2 region, contiguous */
- ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
- ldr r2, =0x30000005
- str r2, [r1] /* enable both flash selects */
-
-#ifdef CONFIG_CM41xx
- /*
- * map the second flash chip, using the external IO lines.
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL0)
- ldr r2, =0xafe80b6d
- str r2, [r1] /* remap io0 region, contiguous */
- ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL1)
- ldr r2, =0xbfec0b6d
- str r2, [r1] /* remap io1 region, contiguous */
- ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
- ldr r2, =0x30050005
- str r2, [r1] /* enable second flash */
-#endif
-
- /*
- * before relocating, we have to setup RAM timing
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL0)
-#if (PHYS_SDRAM_1_SIZE == 0x02000000)
- ldr r2, =0x7fc0000e /* 32MB */
-#else
- ldr r2, =0x3fc0000e /* 16MB */
-#endif
- str r2, [r1] /* configure sdram bank0 setup */
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL1)
- mov r2, #0
- str r2, [r1] /* configure sdram bank1 setup */
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_GENERAL)
- ldr r2, =0x0000000a
- str r2, [r1] /* set RAS/CAS timing */
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
- ldr r2, =0x00030000
- str r2, [r1] /* send NOP command */
- DELAY_FOR 0x100, r0
- ldr r2, =0x00010000
- str r2, [r1] /* send PRECHARGE-ALL */
- DELAY_FOR 0x100, r0
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_REFRESH)
- ldr r2, =0x00000020
- str r2, [r1] /* set for fast refresh */
- DELAY_FOR 0x100, r0
- ldr r2, =0x00000190
- str r2, [r1] /* set normal refresh timing */
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
- ldr r2, =0x00020033
- str r2, [r1] /* send mode command */
- DELAY_FOR 0x100, r0
- ldr r2, =0x01f00000
- str r2, [r1] /* enable sdram fifos */
-
- /*
- * set pll to top speed
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_SYSTEN_BUS_CLOCK)
- mov r2, #0
- str r2, [r1] /* set pll clock to 166MHz */
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SWITCH_CTRL0)
- ldr r2, [r1] /* Get switch ctrl0 register */
- and r2, r2, #0x0fc00000 /* Mask out LED control bits */
- orr r2, r2, #0x01800000 /* Set Link/activity/speed actions */
- str r2, [r1]
-
-#ifdef CONFIG_CM4008
- ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_MODE)
- ldr r2, =0x0000fe30
- str r2, [r1] /* enable LED's as outputs */
- ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_DATA)
- ldr r2, =0x0000fe20
- str r2, [r1] /* turn on power LED */
-#endif
-#if defined(CONFIG_CM4008) || defined(CONFIG_CM41xx)
- ldr r2, [r1] /* get current GPIO input data */
- tst r2, #0x8 /* check if "erase" depressed */
- beq nobutton
- mov r2, #0 /* be quiet on boot, no console */
- ldr r1, =serial_console
- str r2, [r1]
-nobutton:
-#endif
-
- add lr, lr, #0x02000000 /* flash is now mapped high */
- add ip, ip, #0x02000000 /* this is a hack */
- mov pc, lr /* all done, return */
-
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */