summaryrefslogtreecommitdiff
path: root/cpu/arm920t/imx/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/arm920t/imx/serial.c')
-rw-r--r--cpu/arm920t/imx/serial.c227
1 files changed, 0 insertions, 227 deletions
diff --git a/cpu/arm920t/imx/serial.c b/cpu/arm920t/imx/serial.c
deleted file mode 100644
index 85f1167..0000000
--- a/cpu/arm920t/imx/serial.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#if defined (CONFIG_IMX)
-
-#include <asm/arch/imx-regs.h>
-
-#ifndef CONFIG_IMX_SERIAL_NONE
-
-#if defined CONFIG_IMX_SERIAL1
-#define UART_BASE IMX_UART1_BASE
-#elif defined CONFIG_IMX_SERIAL2
-#define UART_BASE IMX_UART2_BASE
-#else
-#error "define CONFIG_IMX_SERIAL1, CONFIG_IMX_SERIAL2 or CONFIG_IMX_SERIAL_NONE"
-#endif
-
-struct imx_serial {
- volatile uint32_t urxd[16];
- volatile uint32_t utxd[16];
- volatile uint32_t ucr1;
- volatile uint32_t ucr2;
- volatile uint32_t ucr3;
- volatile uint32_t ucr4;
- volatile uint32_t ufcr;
- volatile uint32_t usr1;
- volatile uint32_t usr2;
- volatile uint32_t uesc;
- volatile uint32_t utim;
- volatile uint32_t ubir;
- volatile uint32_t ubmr;
- volatile uint32_t ubrc;
- volatile uint32_t bipr[4];
- volatile uint32_t bmpr[4];
- volatile uint32_t uts;
-};
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void serial_setbrg (void)
-{
- serial_init();
-}
-
-extern void imx_gpio_mode(int gpio_mode);
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-int serial_init (void)
-{
- volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
- unsigned int ufcr_rfdiv;
- unsigned int refclk;
-
-#ifdef CONFIG_IMX_SERIAL1
- imx_gpio_mode(PC11_PF_UART1_TXD);
- imx_gpio_mode(PC12_PF_UART1_RXD);
-#else
- imx_gpio_mode(PB30_PF_UART2_TXD);
- imx_gpio_mode(PB31_PF_UART2_RXD);
-#endif
-
- /* Disable UART */
- base->ucr1 &= ~UCR1_UARTEN;
-
- /* Set to default POR state */
-
- base->ucr1 = 0x00000004;
- base->ucr2 = 0x00000000;
- base->ucr3 = 0x00000000;
- base->ucr4 = 0x00008040;
- base->uesc = 0x0000002B;
- base->utim = 0x00000000;
- base->ubir = 0x00000000;
- base->ubmr = 0x00000000;
- base->uts = 0x00000000;
- /* Set clocks */
- base->ucr4 |= UCR4_REF16;
-
- /* Configure FIFOs */
- base->ufcr = 0xa81;
-
- /* set the baud rate.
- *
- * baud * 16 x
- * --------- = -
- * refclk y
- *
- * x - 1 = UBIR
- * y - 1 = UBMR
- *
- * each register is 16 bits wide. refclk max is 96 MHz
- *
- */
-
- ufcr_rfdiv = ((base->ufcr) & UFCR_RFDIV) >> 7;
- if (ufcr_rfdiv == 6)
- ufcr_rfdiv = 7;
- else
- ufcr_rfdiv = 6 - ufcr_rfdiv;
-
- refclk = get_PERCLK1();
- refclk /= ufcr_rfdiv;
-
- /* Set the numerator value minus one of the BRM ratio */
- base->ubir = (gd->baudrate / 100) - 1;
-
- /* Set the denominator value minus one of the BRM ratio */
- base->ubmr = (refclk/(16 * 100)) - 1;
-
- /* Set to 8N1 */
- base->ucr2 &= ~UCR2_PREN;
- base->ucr2 |= UCR2_WS;
- base->ucr2 &= ~UCR2_STPB;
-
- /* Ignore RTS */
- base->ucr2 |= UCR2_IRTS;
-
- /* Enable UART */
- base->ucr1 |= UCR1_UARTEN | UCR1_UARTCLKEN;
-
- /* Enable FIFOs */
- base->ucr2 |= UCR2_SRST | UCR2_RXEN | UCR2_TXEN;
-
- /* Clear status flags */
- base->usr2 |= USR2_ADET |
- USR2_DTRF |
- USR2_IDLE |
- USR2_IRINT |
- USR2_WAKE |
- USR2_RTSF |
- USR2_BRCD |
- USR2_ORE;
-
- /* Clear status flags */
- base->usr1 |= USR1_PARITYERR |
- USR1_RTSD |
- USR1_ESCF |
- USR1_FRAMERR |
- USR1_AIRINT |
- USR1_AWAKE;
- return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is successful, the character read is
- * written into its argument c.
- */
-int serial_getc (void)
-{
- volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
- unsigned char ch;
-
- while(base->uts & UTS_RXEMPTY);
-
- ch = (char)base->urxd[0];
-
- return ch;
-}
-
-#ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
-int hwflow_onoff(int on)
-{
-}
-#endif
-
-/*
- * Output a single byte to the serial port.
- */
-void serial_putc (const char c)
-{
- volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
-
- /* Wait for Tx FIFO not full */
- while (base->uts & UTS_TXFULL);
-
- base->utxd[0] = c;
-
- /* If \n, also do \r */
- if (c == '\n')
- serial_putc ('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-int serial_tstc (void)
-{
- volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
-
- /* If receive fifo is empty, return false */
- if (base->uts & UTS_RXEMPTY)
- return 0;
- return 1;
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-#endif /* CONFIG_IMX_SERIAL_NONE */
-#endif /* defined CONFIG_IMX */