diff options
Diffstat (limited to 'cpu/arm920t/a320/timer.c')
| -rw-r--r-- | cpu/arm920t/a320/timer.c | 193 |
1 files changed, 0 insertions, 193 deletions
diff --git a/cpu/arm920t/a320/timer.c b/cpu/arm920t/a320/timer.c deleted file mode 100644 index bb65593..0000000 --- a/cpu/arm920t/a320/timer.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang <ratbert@faraday-tech.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/ftpmu010.h> -#include <asm/arch/fttmr010.h> - -static ulong timestamp; -static ulong lastdec; - -static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; -static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; - -#define TIMER_CLOCK 32768 -#define TIMER_LOAD_VAL 0xffffffff - -int timer_init(void) -{ - unsigned int oscc; - unsigned int cr; - - debug("%s()\n", __func__); - - /* disable timers */ - writel(0, &tmr->cr); - - /* - * use 32768Hz oscillator for RTC, WDT, TIMER - */ - - /* enable the 32768Hz oscillator */ - oscc = readl(&pmu->OSCC); - oscc &= ~(FTPMU010_OSCC_OSCL_OFF | FTPMU010_OSCC_OSCL_TRI); - writel(oscc, &pmu->OSCC); - - /* wait until ready */ - while (!(readl(&pmu->OSCC) & FTPMU010_OSCC_OSCL_STABLE)) - ; - - /* select 32768Hz oscillator */ - oscc = readl(&pmu->OSCC); - oscc |= FTPMU010_OSCC_OSCL_RTCLSEL; - writel(oscc, &pmu->OSCC); - - /* setup timer */ - writel(TIMER_LOAD_VAL, &tmr->timer3_load); - writel(TIMER_LOAD_VAL, &tmr->timer3_counter); - writel(0, &tmr->timer3_match1); - writel(0, &tmr->timer3_match2); - - /* we don't want timer to issue interrupts */ - writel(FTTMR010_TM3_MATCH1 | - FTTMR010_TM3_MATCH2 | - FTTMR010_TM3_OVERFLOW, - &tmr->interrupt_mask); - - cr = readl(&tmr->cr); - cr |= FTTMR010_TM3_CLOCK; /* use external clock */ - cr |= FTTMR010_TM3_ENABLE; - writel(cr, &tmr->cr); - - /* init the timestamp and lastdec value */ - reset_timer_masked(); - - return 0; -} - -/* - * timer without interrupts - */ - -/* - * reset time - */ -void reset_timer_masked(void) -{ - /* capure current decrementer value time */ - lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); - timestamp = 0; /* start "advancing" time stamp from 0 */ - - debug("%s(): lastdec = %lx\n", __func__, lastdec); -} - -void reset_timer(void) -{ - debug("%s()\n", __func__); - reset_timer_masked(); -} - -/* - * return timer ticks - */ -ulong get_timer_masked(void) -{ - /* current tick value */ - ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); - - debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec); - - if (lastdec >= now) { - /* - * normal mode (non roll) - * move stamp fordward with absoulte diff ticks - */ - timestamp += lastdec - now; - } else { - /* - * we have overflow of the count down timer - * - * nts = ts + ld + (TLV - now) - * ts=old stamp, ld=time that passed before passing through -1 - * (TLV-now) amount of time after passing though -1 - * nts = new "advancing time stamp"...it could also roll and - * cause problems. - */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } - - lastdec = now; - - debug("%s() returns %lx\n", __func__, timestamp); - - return timestamp; -} - -/* - * return difference between timer ticks and base - */ -ulong get_timer(ulong base) -{ - debug("%s(%lx)\n", __func__, base); - return get_timer_masked() - base; -} - -void set_timer(ulong t) -{ - debug("%s(%lx)\n", __func__, t); - timestamp = t; -} - -/* delay x useconds AND perserve advance timstamp value */ -void udelay(unsigned long usec) -{ - long tmo = usec * (TIMER_CLOCK / 1000) / 1000; - unsigned long now, last = readl(&tmr->timer3_counter); - - debug("%s(%lu)\n", __func__, usec); - while (tmo > 0) { - now = readl(&tmr->timer3_counter); - if (now > last) /* count down timer overflow */ - tmo -= TIMER_LOAD_VAL + last - now; - else - tmo -= last - now; - last = now; - } -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - debug("%s()\n", __func__); - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - debug("%s()\n", __func__); - return CONFIG_SYS_HZ; -} |