diff options
Diffstat (limited to 'cpu/arm720t')
| -rw-r--r-- | cpu/arm720t/cpu.c | 2 | ||||
| -rw-r--r-- | cpu/arm720t/interrupts.c | 18 | ||||
| -rw-r--r-- | cpu/arm720t/lpc2292/flash.c | 4 | ||||
| -rw-r--r-- | cpu/arm720t/serial.c | 2 | ||||
| -rw-r--r-- | cpu/arm720t/serial_netarm.c | 2 | ||||
| -rw-r--r-- | cpu/arm720t/start.S | 12 |
6 files changed, 20 insertions, 20 deletions
diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c index 60c1aa9..5ac8f59 100644 --- a/cpu/arm720t/cpu.c +++ b/cpu/arm720t/cpu.c @@ -41,7 +41,7 @@ int cpu_init (void) * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; + IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif return 0; diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c index 9854016..39ed345 100644 --- a/cpu/arm720t/interrupts.c +++ b/cpu/arm720t/interrupts.c @@ -95,7 +95,7 @@ static void timer_isr( void *data) { unsigned int *pTime = (unsigned int *)data; (*pTime)++; - if ( !(*pTime % (CFG_HZ/4))) { + if ( !(*pTime % (CONFIG_SYS_HZ/4))) { /* toggle LED 0 */ PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1); } @@ -118,7 +118,7 @@ int interrupt_init (void) IRQEN = 0; /* operate timer 2 in non-prescale mode */ - TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CFG_HZ) | + TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) | NETARM_GEN_TCTL_ENABLE | NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL)); @@ -166,9 +166,9 @@ int interrupt_init (void) /* * Load Timer data register with count down value. - * count_down_val = CFG_SYS_CLK_FREQ/CFG_HZ + * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ */ - PUT_REG( REG_TDATA0, (CFG_SYS_CLK_FREQ / CFG_HZ)); + PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ)); /* * Enable global interrupt @@ -181,7 +181,7 @@ int interrupt_init (void) #elif defined(CONFIG_LPC2292) PUT32(T0IR, 0); /* disable all timer0 interrupts */ PUT32(T0TCR, 0); /* disable timer0 */ - PUT32(T0PR, CFG_SYS_CLK_FREQ / CFG_HZ); + PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ); PUT32(T0MCR, 0); PUT32(T0TC, 0); PUT32(T0TCR, 1); /* enable timer0 */ @@ -223,7 +223,7 @@ void udelay (unsigned long usec) ulong tmo; tmo = usec / 1000; - tmo *= CFG_HZ; + tmo *= CONFIG_SYS_HZ; tmo /= 1000; tmo += get_timer (0); @@ -268,10 +268,10 @@ void udelay_masked (unsigned long usec) if (usec >= 1000) { tmo = usec / 1000; - tmo *= CFG_HZ; + tmo *= CONFIG_SYS_HZ; tmo /= 1000; } else { - tmo = usec * CFG_HZ; + tmo = usec * CONFIG_SYS_HZ; tmo /= (1000*1000); } @@ -294,7 +294,7 @@ void udelay (unsigned long usec) { u32 ticks; - ticks = (usec * CFG_HZ) / 1000000; + ticks = (usec * CONFIG_SYS_HZ) / 1000000; ticks += get_timer (0); diff --git a/cpu/arm720t/lpc2292/flash.c b/cpu/arm720t/lpc2292/flash.c index e5c8697..3d2dc32 100644 --- a/cpu/arm720t/lpc2292/flash.c +++ b/cpu/arm720t/lpc2292/flash.c @@ -85,7 +85,7 @@ int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) command[1] = flash_addr; command[2] = COPY_BUFFER_LOCATION; command[3] = 512; - command[4] = CFG_SYS_CLK_FREQ >> 10; + command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10; iap_entry(command, result); if (result[0] != IAP_RET_CMD_SUCCESS) { printf("IAP copy failed\n"); @@ -132,7 +132,7 @@ int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last) command[0] = IAP_CMD_ERASE; command[1] = s_first; command[2] = s_last; - command[3] = CFG_SYS_CLK_FREQ >> 10; + command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10; iap_entry(command, result); if (result[0] != IAP_RET_CMD_SUCCESS) { printf("IAP erase failed\n"); diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c index 1b0e147..54a9b31 100644 --- a/cpu/arm720t/serial.c +++ b/cpu/arm720t/serial.c @@ -85,7 +85,7 @@ void serial_putc (const char c) if (c == '\n') serial_putc ('\r'); - tmo = get_timer (0) + 1 * CFG_HZ; + tmo = get_timer (0) + 1 * CONFIG_SYS_HZ; while (IO_SYSFLG1 & SYSFLG1_UTXFF) if (get_timer (0) > tmo) break; diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c index a593cbc..1a1b2db 100644 --- a/cpu/arm720t/serial_netarm.c +++ b/cpu/arm720t/serial_netarm.c @@ -46,7 +46,7 @@ DECLARE_GLOBAL_DATA_PTR; /* wait until transmitter is ready for another character */ #define TXWAITRDY(registers) \ { \ - ulong tmo = get_timer(0) + 1 * CFG_HZ; \ + ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ; \ while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \ if (get_timer(0) > tmo) \ break; \ diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S index 8423e4f..022b873 100644 --- a/cpu/arm720t/start.S +++ b/cpu/arm720t/start.S @@ -166,8 +166,8 @@ copy_loop: /* Set up the stack */ stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ - sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ + sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -444,8 +444,8 @@ lock_loop: add r8, sp, #S_PC ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) - sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) + sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -477,8 +477,8 @@ lock_loop: .macro get_bad_stack ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) - sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) + sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack str lr, [r13] @ save caller lr / spsr mrs lr, spsr |