diff options
Diffstat (limited to 'cpu/arm720t/start.S')
| -rw-r--r-- | cpu/arm720t/start.S | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S index e66d109..8423e4f 100644 --- a/cpu/arm720t/start.S +++ b/cpu/arm720t/start.S @@ -43,7 +43,11 @@ _start: b reset ldr pc, _software_interrupt ldr pc, _prefetch_abort ldr pc, _data_abort +#ifdef CONFIG_LPC2292 + .word 0xB4405F76 /* 2's complement of the checksum of the vectors */ +#else ldr pc, _not_used +#endif ldr pc, _irq ldr pc, _fiq @@ -123,6 +127,10 @@ reset: bl cpu_init_crit #endif +#ifdef CONFIG_LPC2292 + bl lowlevel_init +#endif + #ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ @@ -131,6 +139,7 @@ relocate: /* relocate U-Boot to RAM */ beq stack_setup #if TEXT_BASE +#ifndef CONFIG_LPC2292 /* already done in lowlevel_init */ ldr r2, =0x0 /* Relocate the exception vectors */ cmp r1, r2 /* and associated data to address */ ldmneia r0!, {r3-r10} /* 0x0. Do nothing if TEXT_BASE is */ @@ -138,6 +147,7 @@ relocate: /* relocate U-Boot to RAM */ ldmneia r0, {r3-r9} stmneia r2, {r3-r9} adrne r0, _start /* restore r0 */ +#endif /* !CONFIG_LPC2292 */ #endif ldr r2, _armboot_start @@ -206,6 +216,14 @@ SYSCON3: .word 0x80002200 #define CLKCTL_49 0x4 /* 49.152 MHz */ #define CLKCTL_73 0x6 /* 73.728 MHz */ +#elif defined(CONFIG_LPC2292) +PLLCFG_ADR: .word PLLCFG +PLLFEED_ADR: .word PLLFEED +PLLCON_ADR: .word PLLCON +PLLSTAT_ADR: .word PLLSTAT +VPBDIV_ADR: .word VPBDIV +MEMMAP_ADR: .word MEMMAP + #endif cpu_init_crit: @@ -306,6 +324,50 @@ cpu_init_crit: #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No specific initialisation for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_LPC2292) + /* Set-up PLL */ + mov r3, #0xAA + mov r4, #0x55 + /* First disconnect and disable the PLL */ + ldr r0, PLLCON_ADR + mov r1, #0x00 + str r1, [r0] + ldr r0, PLLFEED_ADR /* start feed sequence */ + str r3, [r0] + str r4, [r0] /* feed sequence done */ + /* Set new M and P values */ + ldr r0, PLLCFG_ADR + mov r1, #0x23 /* M=4 and P=2 */ + str r1, [r0] + ldr r0, PLLFEED_ADR /* start feed sequence */ + str r3, [r0] + str r4, [r0] /* feed sequence done */ + /* Then enable the PLL */ + ldr r0, PLLCON_ADR + mov r1, #0x01 /* PLL enable bit */ + str r1, [r0] + ldr r0, PLLFEED_ADR /* start feed sequence */ + str r3, [r0] + str r4, [r0] /* feed sequence done */ + /* Wait for the lock */ + ldr r0, PLLSTAT_ADR + mov r1, #0x400 /* lock bit */ +lock_loop: + ldr r2, [r0] + and r2, r1, r2 + cmp r2, #0 + beq lock_loop + /* And finally connect the PLL */ + ldr r0, PLLCON_ADR + mov r1, #0x03 /* PLL enable bit and connect bit */ + str r1, [r0] + ldr r0, PLLFEED_ADR /* start feed sequence */ + str r3, [r0] + str r4, [r0] /* feed sequence done */ + /* Set-up VPBDIV register */ + ldr r0, VPBDIV_ADR + mov r1, #0x01 /* VPB clock is same as process clock */ + str r1, [r0] #else #error No cpu_init_crit() defined for current CPU type #endif @@ -321,6 +383,7 @@ cpu_init_crit: str r1, [r0] #endif +#ifndef CONFIG_LPC2292 mov ip, lr /* * before relocating, we have to setup RAM timing @@ -329,6 +392,7 @@ cpu_init_crit: */ bl lowlevel_init mov lr, ip +#endif mov pc, lr @@ -537,6 +601,11 @@ reset_cpu: * on external peripherals such as watchdog timers, etc. */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No specific reset actions for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_LPC2292) + .align 5 +.globl reset_cpu +reset_cpu: + mov pc, r0 #else #error No reset_cpu() defined for current CPU type #endif |