summaryrefslogtreecommitdiff
path: root/cpu/arm720t/serial_netarm.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/arm720t/serial_netarm.c')
-rw-r--r--cpu/arm720t/serial_netarm.c200
1 files changed, 0 insertions, 200 deletions
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
deleted file mode 100644
index 1a1b2db..0000000
--- a/cpu/arm720t/serial_netarm.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Serial Port stuff - taken from Linux
- *
- * (C) Copyright 2002
- * MAZeT GmbH <www.mazet.de>
- * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
- *
- * (c) 2004
- * IMMS gGmbH <www.imms.de>
- * Thomas Elste <info@elste.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-
-#ifdef CONFIG_NETARM
-
-#include <asm/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
-#if !defined(CONFIG_NETARM_NS7520)
-#define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
-#else
-#define PORTC (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC))
-#endif
-
-/* wait until transmitter is ready for another character */
-#define TXWAITRDY(registers) \
-{ \
- ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ; \
- while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \
- if (get_timer(0) > tmo) \
- break; \
- } \
-}
-
-
-#ifndef CONFIG_UART1_CONSOLE
-volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
-volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
-#else
-volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(1);
-volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(0);
-#endif
-
-extern void _netarm_led_FAIL1(void);
-
-/*
- * Setup both serial i/f with given baudrate
- */
-void serial_setbrg (void)
-{
- /* set 0 ... make sure pins are configured for serial */
-#if !defined(CONFIG_NETARM_NS7520)
- PORTA = PORTB =
- NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-#else
- PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
- PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-#endif
-
- /* first turn em off */
- serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0;
-
- /* clear match register, we don't need it */
- serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0;
-
- /* setup bit rate generator and rx buffer gap timer (1 byte only) */
- if ((gd->baudrate >= MIN_BAUD_RATE)
- && (gd->baudrate <= MAX_BAUD_RATE)) {
- serial_reg_ch1->bitrate = serial_reg_ch2->bitrate =
- NETARM_SER_BR_X16 (gd->baudrate);
- serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer =
- 0;
- serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer =
- NETARM_SER_RXGAP (gd->baudrate);
- } else {
- hang ();
- }
-
- /* setup port mode */
- serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b =
- ( NETARM_SER_CTLB_RCGT_EN |
- NETARM_SER_CTLB_UART_MODE);
- serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a =
- ( NETARM_SER_CTLA_ENABLE |
- NETARM_SER_CTLA_P_NONE |
- /* see errata */
- NETARM_SER_CTLA_2STOP |
- NETARM_SER_CTLA_8BITS |
- NETARM_SER_CTLA_DTR_EN |
- NETARM_SER_CTLA_RTS_EN);
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- */
-int serial_init (void)
-{
- serial_setbrg ();
- return 0;
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-void serial_putc (const char c)
-{
- volatile unsigned char *fifo;
-
- /* If \n, also do \r */
- if (c == '\n')
- serial_putc ('\r');
-
- fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo);
- TXWAITRDY (serial_reg_ch1);
- *fifo = c;
-}
-
-/*
- * Test of a single byte from the serial port. Returns 1 on success, 0
- * otherwise.
- */
-int serial_tstc(void)
-{
- return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise.
- */
-int serial_getc (void)
-{
- unsigned int ch_uint;
- volatile unsigned int *fifo;
- volatile unsigned char *fifo_char = NULL;
- int buf_count = 0;
-
- while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY))
- /* NOP */ ;
-
- fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo);
- fifo_char = (unsigned char *) &ch_uint;
- ch_uint = *fifo;
-
- buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a);
- switch (buf_count) {
- case NETARM_SER_STATA_RXFDB_4BYTES:
- buf_count = 4;
- break;
- case NETARM_SER_STATA_RXFDB_3BYTES:
- buf_count = 3;
- break;
- case NETARM_SER_STATA_RXFDB_2BYTES:
- buf_count = 2;
- break;
- case NETARM_SER_STATA_RXFDB_1BYTES:
- buf_count = 1;
- break;
- default:
- /* panic, be never here */
- break;
- }
-
- serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED;
-
- return ch_uint & 0xff;
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-#endif /* CONFIG_NETARM */