diff options
Diffstat (limited to 'cpu/arm1136/mx31')
| -rw-r--r-- | cpu/arm1136/mx31/Makefile | 44 | ||||
| -rw-r--r-- | cpu/arm1136/mx31/generic.c | 99 | ||||
| -rw-r--r-- | cpu/arm1136/mx31/interrupts.c | 113 | ||||
| -rw-r--r-- | cpu/arm1136/mx31/serial.c | 230 |
4 files changed, 0 insertions, 486 deletions
diff --git a/cpu/arm1136/mx31/Makefile b/cpu/arm1136/mx31/Makefile deleted file mode 100644 index 1fc8eea..0000000 --- a/cpu/arm1136/mx31/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2000-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundatio; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(SOC).a - -COBJS = interrupts.o serial.o generic.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) - -all: $(obj).depend $(LIB) - -$(LIB): $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -####################################################################### -## - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c deleted file mode 100644 index 297d616..0000000 --- a/cpu/arm1136/mx31/generic.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2007 - * Sascha Hauer, Pengutronix - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/mx31-regs.h> - -static u32 mx31_decode_pll(u32 reg, u32 infreq) -{ - u32 mfi = (reg >> 10) & 0xf; - u32 mfn = reg & 0x3f; - u32 mfd = (reg >> 16) & 0x3f; - u32 pd = (reg >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - mfd += 1; - pd += 1; - - return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) / - (mfd * pd)) << 10; -} - -u32 mx31_get_mpl_dpdgck_clk(void) -{ - u32 infreq; - - if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM) - infreq = CONFIG_MX31_CLK32 * 1024; - else - infreq = CONFIG_MX31_HCLK_FREQ; - - return mx31_decode_pll(__REG(CCM_MPCTL), infreq); } - -u32 mx31_get_mcu_main_clk(void) -{ - /* For now we assume mpl_dpdgck_clk == mcu_main_clk - * which should be correct for most boards - */ - return mx31_get_mpl_dpdgck_clk(); -} - -u32 mx31_get_ipg_clk(void) -{ - u32 freq = mx31_get_mcu_main_clk(); - u32 pdr0 = __REG(CCM_PDR0); - - freq /= ((pdr0 >> 3) & 0x7) + 1; - freq /= ((pdr0 >> 6) & 0x3) + 1; - - return freq; -} - -void mx31_dump_clocks(void) -{ - u32 cpufreq = mx31_get_mcu_main_clk(); - printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000); - printf("ipg clock : %dHz\n", mx31_get_ipg_clk()); -} - -void mx31_gpio_mux(unsigned long mode) -{ - unsigned long reg, shift, tmp; - - reg = IOMUXC_BASE + (mode & 0xfc); - shift = (~mode & 0x3) * 8; - - tmp = __REG(reg); - tmp &= ~(0xff << shift); - tmp |= ((mode >> 8) & 0xff) << shift; - __REG(reg) = tmp; -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - printf("CPU: Freescale i.MX31 at %d MHz\n", - mx31_get_mcu_main_clk() / 1000000); - return 0; -} -#endif diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c deleted file mode 100644 index 189f601..0000000 --- a/cpu/arm1136/mx31/interrupts.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * (C) Copyright 2007 - * Sascha Hauer, Pengutronix - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/mx31-regs.h> - -#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ - -/* General purpose timers registers */ -#define GPTCR __REG(TIMER_BASE) /* Control register */ -#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */ -#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */ -#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */ - -/* General purpose timers bitfields */ -#define GPTCR_SWR (1<<15) /* Software reset */ -#define GPTCR_FRR (1<<9) /* Freerun / restart */ -#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ -#define GPTCR_TEN (1) /* Timer enable */ - -/* - * nothing really to do with interrupts, just starts up a counter. - */ -int interrupt_init(void) -{ - int i; - - /* setup GP Timer 1 */ - GPTCR = GPTCR_SWR; - for (i = 0; i < 100; i++) GPTCR = 0; /* We have no udelay by now */ - GPTPR = 0; /* 32Khz */ - /* Freerun Mode, PERCLK1 input */ - GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; - - return 0; -} - -void reset_timer_masked(void) -{ - GPTCR = 0; - /* Freerun Mode, PERCLK1 input*/ - GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN; -} - -ulong get_timer_masked(void) -{ - ulong val = GPTCNT; - return val; -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -void set_timer(ulong t) -{ -} - -/* delay x useconds AND perserve advance timstamp value */ -void udelay(unsigned long usec) -{ - ulong tmo, tmp; - - if (usec >= 1000) { - /* "big" number, spread normalization to seconds */ - /* start to normalize for usec to ticks per sec */ - tmo = usec / 1000; - /* find number of "ticks" to wait to achieve target */ - tmo *= CFG_HZ; - tmo /= 1000; /* finish normalize. */ - } else { - /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CFG_HZ; - tmo /= (1000*1000); - } - - tmp = get_timer(0); /* get current timestamp */ - if ((tmo + tmp + 1) < tmp) - /* setting this forward will roll time stamp */ - /* reset "advancing" timestamp to 0, set lastinc value */ - reset_timer_masked(); - else - /* else, set advancing stamp wake up time */ - tmo += tmp; - while (get_timer_masked() < tmo)/* loop till event */ - /*NOP*/; -} - -void reset_cpu(ulong addr) -{ - __REG16(WDOG_BASE) = 4; -} diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c deleted file mode 100644 index f7e1b3b..0000000 --- a/cpu/arm1136/mx31/serial.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> - -#if defined CONFIG_MX31_UART - -#include <asm/arch/mx31.h> - -#define __REG(x) (*((volatile u32 *)(x))) - -#ifdef CFG_MX31_UART1 -#define UART_PHYS 0x43f90000 -#elif defined(CFG_MX31_UART2) -#define UART_PHYS 0x43f94000 -#elif defined(CFG_MX31_UART3) -#define UART_PHYS 0x5000c000 -#elif defined(CFG_MX31_UART4) -#define UART_PHYS 0x43fb0000 -#elif defined(CFG_MX31_UART5) -#define UART_PHYS 0x43fb4000 -#else -#error "define CFG_MX31_UARTx to use the mx31 UART driver" -#endif - -/* Register definitions */ -#define URXD 0x0 /* Receiver Register */ -#define UTXD 0x40 /* Transmitter Register */ -#define UCR1 0x80 /* Control Register 1 */ -#define UCR2 0x84 /* Control Register 2 */ -#define UCR3 0x88 /* Control Register 3 */ -#define UCR4 0x8c /* Control Register 4 */ -#define UFCR 0x90 /* FIFO Control Register */ -#define USR1 0x94 /* Status Register 1 */ -#define USR2 0x98 /* Status Register 2 */ -#define UESC 0x9c /* Escape Character Register */ -#define UTIM 0xa0 /* Escape Timer Register */ -#define UBIR 0xa4 /* BRM Incremental Register */ -#define UBMR 0xa8 /* BRM Modulator Register */ -#define UBRC 0xac /* Baud Rate Count Register */ -#define UTS 0xb4 /* UART Test Register (mx31) */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - -DECLARE_GLOBAL_DATA_PTR; - -void serial_setbrg(void) -{ - u32 clk = mx31_get_ipg_clk(); - - if (!gd->baudrate) - gd->baudrate = CONFIG_BAUDRATE; - - __REG(UART_PHYS + UFCR) = 4 << 7; /* divide input clock by 2 */ - __REG(UART_PHYS + UBIR) = 0xf; - __REG(UART_PHYS + UBMR) = clk / (2 * gd->baudrate); - -} - -int serial_getc(void) -{ - while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); - return __REG(UART_PHYS + URXD); -} - -void serial_putc(const char c) -{ - __REG(UART_PHYS + UTXD) = c; - - /* wait for transmitter to be ready */ - while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY)); - - /* If \n, also do \r */ - if (c == '\n') - serial_putc('\r'); -} - -/* - * Test whether a character is in the RX buffer */ -int serial_tstc(void) -{ - /* If receive fifo is empty, return false */ - if (__REG(UART_PHYS + UTS) & UTS_RXEMPTY) - return 0; - return 1; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -int serial_init(void) -{ - __REG(UART_PHYS + UCR1) = 0x0; - __REG(UART_PHYS + UCR2) = 0x0; - - while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST)); - - __REG(UART_PHYS + UCR3) = 0x0704; - __REG(UART_PHYS + UCR4) = 0x8000; - __REG(UART_PHYS + UESC) = 0x002b; - __REG(UART_PHYS + UTIM) = 0x0; - - __REG(UART_PHYS + UTS) = 0x0; - - serial_setbrg(); - - __REG(UART_PHYS + UCR2) = UCR2_WS | UCR2_IRTS | UCR2_RXEN | \ - UCR2_TXEN | UCR2_SRST; - - __REG(UART_PHYS + UCR1) = UCR1_UARTEN; - - return 0; -} - - -#endif /* CONFIG_MX31 */ |