summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
Diffstat (limited to 'common')
-rw-r--r--common/cmd_nand.c2
-rw-r--r--common/usb_storage.c358
2 files changed, 323 insertions, 37 deletions
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index ce7b5ff..60cdd8e 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -38,7 +38,7 @@ struct nand_oob_config {
int eccvalid_pos; /* position of ECC valid flag inside oob -1 = inactive */
} oob_config = { {0}, 0, 0};
-#undef NAND_DEBUG
+#define NAND_DEBUG
#undef PSYCHO_DEBUG
/* ****************** WARNING *********************
diff --git a/common/usb_storage.c b/common/usb_storage.c
index a7944b5..7089036 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -2,8 +2,12 @@
* (C) Copyright 2001
* Denis Peter, MPL AG Switzerland
*
+ * For BBB support (C) Copyright 2003
+ * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
+ *
* Most of this source has been derived from the Linux USB
- * project.
+ * project. BBB support based on /sys/dev/usb/umass.c from
+ * FreeBSD.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -30,6 +34,13 @@
* is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB
* transport protocoll may work as well.
*/
+/*
+ * New Note:
+ * Support for USB Mass Storage Devices (BBB) has been added. It has
+ * only been tested with USB memory sticks.
+ * Nota bene: if you are using the BBB support with a little-endian
+ * CPU then you MUST define LITTLEENDIAN in the configuration file!
+ */
#include <common.h>
@@ -71,6 +82,41 @@ static ccb usb_ccb;
#define US_CBI_ADSC 0
+/*
+ * BULK only
+ */
+#define US_BBB_RESET 0xff
+#define US_BBB_GET_MAX_LUN 0xfe
+
+/* Command Block Wrapper */
+typedef struct {
+ __u32 dCBWSignature;
+# define CBWSIGNATURE 0x43425355
+ __u32 dCBWTag;
+ __u32 dCBWDataTransferLength;
+ __u8 bCBWFlags;
+# define CBWFLAGS_OUT 0x00
+# define CBWFLAGS_IN 0x80
+ __u8 bCBWLUN;
+ __u8 bCDBLength;
+# define CBWCDBLENGTH 16
+ __u8 CBWCDB[CBWCDBLENGTH];
+} umass_bbb_cbw_t;
+#define UMASS_BBB_CBW_SIZE 31
+static __u32 CBWTag = 0;
+
+/* Command Status Wrapper */
+typedef struct {
+ __u32 dCSWSignature;
+# define CSWSIGNATURE 0x53425355
+ __u32 dCSWTag;
+ __u32 dCSWDataResidue;
+ __u8 bCSWStatus;
+# define CSWSTATUS_GOOD 0x0
+# define CSWSTATUS_FAILED 0x1
+# define CSWSTATUS_PHASE 0x2
+} umass_bbb_csw_t;
+#define UMASS_BBB_CSW_SIZE 13
#define USB_MAX_STOR_DEV 5
static int usb_max_devs; /* number of highest available usb device */
@@ -138,6 +184,9 @@ int usb_stor_scan(int mode)
unsigned char i;
struct usb_device *dev;
+ /* GJ */
+ memset(usb_stor_buf, 0, sizeof(usb_stor_buf));
+
if(mode==1) {
printf("scanning bus for storage devices...\n");
}
@@ -293,6 +342,51 @@ static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length)
return 0;
}
+static int usb_stor_BBB_reset(struct us_data *us)
+{
+ int result;
+ unsigned int pipe;
+
+ /*
+ * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
+ *
+ * For Reset Recovery the host shall issue in the following order:
+ * a) a Bulk-Only Mass Storage Reset
+ * b) a Clear Feature HALT to the Bulk-In endpoint
+ * c) a Clear Feature HALT to the Bulk-Out endpoint
+ *
+ * This is done in 3 steps.
+ *
+ * If the reset doesn't succeed, the device should be port reset.
+ *
+ * This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
+ */
+ USB_STOR_PRINTF("BBB_reset\n");
+ result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0),
+ US_BBB_RESET, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT*5);
+ if((result < 0) && (us->pusb_dev->status & USB_ST_STALLED))
+ {
+ USB_STOR_PRINTF("RESET:stall\n");
+ return -1;
+ }
+ /* long wait for reset */
+ wait_ms(150);
+ USB_STOR_PRINTF("BBB_reset result %d: status %X reset\n",result,us->pusb_dev->status);
+ pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
+ result = usb_clear_halt(us->pusb_dev, pipe);
+ /* long wait for reset */
+ wait_ms(150);
+ USB_STOR_PRINTF("BBB_reset result %d: status %X clearing IN endpoint\n",result,us->pusb_dev->status);
+ /* long wait for reset */
+ pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
+ result = usb_clear_halt(us->pusb_dev, pipe);
+ wait_ms(150);
+ USB_STOR_PRINTF("BBB_reset result %d: status %X clearing OUT endpoint\n",result,us->pusb_dev->status);
+ USB_STOR_PRINTF("BBB_reset done\n");
+ return 0;
+}
+
/* FIXME: this reset function doesn't really reset the port, and it
* should. Actually it should probably do what it's doing here, and
* reset the port physically
@@ -320,6 +414,52 @@ static int usb_stor_CB_reset(struct us_data *us)
return 0;
}
+/*
+ * Set up the command for a BBB device. Note that the actual SCSI
+ * command is copied into cbw.CBWCDB.
+ */
+int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
+{
+ int result;
+ int actlen;
+ int dir_in;
+ unsigned int pipe;
+ umass_bbb_cbw_t cbw;
+
+ dir_in = US_DIRECTION(srb->cmd[0]);
+
+#ifdef BBB_COMDAT_TRACE
+ printf("dir %d lun %d cmdlen %d cmd %p datalen %d pdata %p\n", dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen, srb->pdata);
+ if (srb->cmdlen) {
+ for(result = 0;result < srb->cmdlen;result++)
+ printf("cmd[%d] %#x ", result, srb->cmd[result]);
+ printf("\n");
+ }
+#endif
+ /* sanity checks */
+ if (!(srb->cmdlen <= CBWCDBLENGTH)) {
+ USB_STOR_PRINTF("usb_stor_BBB_comdat:cmdlen too large\n");
+ return -1;
+ }
+
+ /* always OUT to the ep */
+ pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
+
+ cbw.dCBWSignature = swap_32(CBWSIGNATURE);
+ cbw.dCBWTag = swap_32(CBWTag++);
+ cbw.dCBWDataTransferLength = swap_32(srb->datalen);
+ cbw.bCBWFlags = (dir_in? CBWFLAGS_IN : CBWFLAGS_OUT);
+ cbw.bCBWLUN = srb->lun;
+ cbw.bCDBLength = srb->cmdlen;
+ /* copy the command data into the CBW command data buffer */
+ /* DST SRC LEN!!! */
+ memcpy(cbw.CBWCDB, srb->cmd, srb->cmdlen);
+ result = usb_bulk_msg(us->pusb_dev, pipe, &cbw, UMASS_BBB_CBW_SIZE, &actlen, USB_CNTL_TIMEOUT*5);
+ if (result < 0)
+ USB_STOR_PRINTF("usb_stor_BBB_comdat:usb_bulk_msg error\n");
+ return result;
+}
+
/* FIXME: we also need a CBI_command which sets up the completion
* interrupt, and waits for it
*/
@@ -422,6 +562,134 @@ int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
#define USB_TRANSPORT_UNKNOWN_RETRY 5
#define USB_TRANSPORT_NOT_READY_RETRY 10
+/* clear a stall on an endpoint - special for BBB devices */
+int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
+{
+ int result;
+
+ /* ENDPOINT_HALT = 0, so set value to 0 */
+ result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
+ 0, endpt, 0, 0, USB_CNTL_TIMEOUT*5);
+ return result;
+}
+
+int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
+{
+ int result, retry;
+ int dir_in;
+ int actlen, data_actlen;
+ unsigned int pipe, pipein, pipeout;
+ umass_bbb_csw_t csw;
+#ifdef BBB_XPORT_TRACE
+ unsigned char *ptr;
+ int index;
+#endif
+
+ dir_in = US_DIRECTION(srb->cmd[0]);
+
+ /* COMMAND phase */
+ USB_STOR_PRINTF("COMMAND phase\n");
+ result = usb_stor_BBB_comdat(srb, us);
+ if (result < 0) {
+ USB_STOR_PRINTF("failed to send CBW status %ld\n",
+ us->pusb_dev->status);
+ usb_stor_BBB_reset(us);
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ wait_ms(5);
+ pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
+ pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
+ /* DATA phase + error handling */
+ USB_STOR_PRINTF("DATA phase\n");
+ data_actlen = 0;
+ /* no data, go immediately to the STATUS phase */
+ if (srb->datalen == 0)
+ goto st;
+ if (dir_in)
+ pipe = pipein;
+ else
+ pipe = pipeout;
+ result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, srb->datalen, &data_actlen, USB_CNTL_TIMEOUT*5);
+ /* special handling of STALL in DATA phase */
+ if((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
+ printf("DATA:stall\n");
+ /* clear the STALL on the endpoint */
+ result = usb_stor_BBB_clear_endpt_stall(us, dir_in? us->ep_in : us->ep_out);
+ if (result >= 0)
+ /* continue on to STATUS phase */
+ goto st;
+ }
+ if (result < 0) {
+ USB_STOR_PRINTF("usb_bulk_msg error status %ld\n",
+ us->pusb_dev->status);
+ usb_stor_BBB_reset(us);
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+#ifdef BBB_XPORT_TRACE
+ for (index = 0; index < data_actlen; index++)
+ printf("pdata[%d] %#x ", index, srb->pdata[index]);
+ printf("\n");
+#endif
+ /* STATUS phase + error handling */
+ st:
+ retry = 0;
+ again:
+ USB_STOR_PRINTF("STATUS phase\n");
+ result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE, &actlen, USB_CNTL_TIMEOUT*5);
+ /* special handling of STALL in STATUS phase */
+ if((result < 0) && (retry < 1) && (us->pusb_dev->status & USB_ST_STALLED)) {
+ USB_STOR_PRINTF("STATUS:stall\n");
+ /* clear the STALL on the endpoint */
+ result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
+ if (result >= 0 && (retry++ < 1))
+ /* do a retry */
+ goto again;
+ }
+ if (result < 0) {
+ USB_STOR_PRINTF("usb_bulk_msg error status %ld\n",
+ us->pusb_dev->status);
+ usb_stor_BBB_reset(us);
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+#ifdef BBB_XPORT_TRACE
+ ptr = (unsigned char *)&csw;
+ for (index = 0; index < UMASS_BBB_CSW_SIZE; index++)
+ printf("ptr[%d] %#x ", index, ptr[index]);
+ printf("\n");
+#endif
+ /* misuse pipe to get the residue */
+ pipe = swap_32(csw.dCSWDataResidue);
+ if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
+ pipe = srb->datalen - data_actlen;
+ if (CSWSIGNATURE != swap_32(csw.dCSWSignature)) {
+ USB_STOR_PRINTF("!CSWSIGNATURE\n");
+ usb_stor_BBB_reset(us);
+ return USB_STOR_TRANSPORT_FAILED;
+ } else if ((CBWTag - 1) != swap_32(csw.dCSWTag)) {
+ USB_STOR_PRINTF("!Tag\n");
+ usb_stor_BBB_reset(us);
+ return USB_STOR_TRANSPORT_FAILED;
+ } else if (csw.bCSWStatus > CSWSTATUS_PHASE) {
+ USB_STOR_PRINTF(">PHASE\n");
+ usb_stor_BBB_reset(us);
+ return USB_STOR_TRANSPORT_FAILED;
+ } else if (csw.bCSWStatus == CSWSTATUS_PHASE) {
+ USB_STOR_PRINTF("=PHASE\n");
+ usb_stor_BBB_reset(us);
+ return USB_STOR_TRANSPORT_FAILED;
+ } else if (data_actlen > srb->datalen) {
+ USB_STOR_PRINTF("transferred %dB instead of %dB\n",
+ data_actlen, srb->datalen);
+ return USB_STOR_TRANSPORT_FAILED;
+ } else if (csw.bCSWStatus == CSWSTATUS_FAILED) {
+ USB_STOR_PRINTF("FAILED\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ return result;
+}
+
int usb_stor_CB_transport(ccb *srb, struct us_data *us)
{
int result,status;
@@ -495,29 +763,28 @@ do_retry:
return USB_STOR_TRANSPORT_GOOD;
/* Check the auto request result */
switch(srb->sense_buf[2]) {
- case 0x01: /* Recovered Error */
- return USB_STOR_TRANSPORT_GOOD;
- break;
- case 0x02: /* Not Ready */
- if(notready++ > USB_TRANSPORT_NOT_READY_RETRY) {
- printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X (NOT READY)\n",
- srb->cmd[0],srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]);
- return USB_STOR_TRANSPORT_FAILED;
- }
- else {
- wait_ms(100);
- goto do_retry;
- }
- break;
- default:
- if(retry++ > USB_TRANSPORT_UNKNOWN_RETRY) {
- printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
- srb->cmd[0],srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]);
- return USB_STOR_TRANSPORT_FAILED;
- }
- else
- goto do_retry;
- break;
+ case 0x01: /* Recovered Error */
+ return USB_STOR_TRANSPORT_GOOD;
+ break;
+ case 0x02: /* Not Ready */
+ if(notready++ > USB_TRANSPORT_NOT_READY_RETRY) {
+ printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X (NOT READY)\n",
+ srb->cmd[0],srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]);
+ return USB_STOR_TRANSPORT_FAILED;
+ } else {
+ wait_ms(100);
+ goto do_retry;
+ }
+ break;
+ default:
+ if(retry++ > USB_TRANSPORT_UNKNOWN_RETRY) {
+ printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
+ srb->cmd[0],srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]);
+ return USB_STOR_TRANSPORT_FAILED;
+ } else {
+ goto do_retry;
+ }
+ break;
}
return USB_STOR_TRANSPORT_FAILED;
}
@@ -538,7 +805,8 @@ static int usb_inquiry(ccb *srb,struct us_data *ss)
USB_STOR_PRINTF("inquiry returns %d\n",i);
if(i==0)
break;
- }while(retry--);
+ } while(retry--);
+
if(!retry) {
printf("error in inquiry\n");
return -1;
@@ -567,17 +835,18 @@ static int usb_request_sense(ccb *srb,struct us_data *ss)
static int usb_test_unit_ready(ccb *srb,struct us_data *ss)
{
int retries=10;
+
do {
memset(&srb->cmd[0],0,12);
srb->cmd[0]=SCSI_TST_U_RDY;
srb->cmd[1]=srb->lun<<5;
srb->datalen=0;
srb->cmdlen=12;
- if(ss->transport(srb,ss)==USB_STOR_TRANSPORT_GOOD)
- {
+ if(ss->transport(srb,ss)==USB_STOR_TRANSPORT_GOOD) {
return 0;
}
} while(retries--);
+
return -1;
}
@@ -594,7 +863,8 @@ static int usb_read_capacity(ccb *srb,struct us_data *ss)
if(ss->transport(srb,ss)==USB_STOR_TRANSPORT_GOOD) {
return 0;
}
- }while(retry--);
+ } while(retry--);
+
return -1;
}
@@ -654,8 +924,7 @@ unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcn
srb->pdata=(unsigned char *)buf_addr;
if(blks>USB_MAX_READ_BLK) {
smallblks=USB_MAX_READ_BLK;
- }
- else {
+ } else {
smallblks=(unsigned short) blks;
}
retry_it:
@@ -751,6 +1020,11 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,struct us_data
ss->transport = usb_stor_CB_transport;
ss->transport_reset = usb_stor_CB_reset;
break;
+ case US_PR_BULK:
+ USB_STOR_PRINTF("Bulk/Bulk/Bulk\n");
+ ss->transport = usb_stor_BBB_transport;
+ ss->transport_reset = usb_stor_BBB_reset;
+ break;
default:
printf("USB Starage Transport unknown / not yet implemented\n");
return 0;
@@ -793,15 +1067,14 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,struct us_data
return 0;
}
/* set class specific stuff */
- /* We only handle certain protocols. Currently, this is
- * the only one.
+ /* We only handle certain protocols. Currently, these are
+ * the only ones.
*/
- if (ss->subclass != US_SC_UFI) {
+ if (ss->subclass != US_SC_UFI && ss->subclass != US_SC_SCSI) {
printf("Sorry, protocol %d not yet supported.\n",ss->subclass);
return 0;
}
- if(ss->ep_int) /* we had found an interrupt endpoint, prepare irq pipe */
- {
+ if(ss->ep_int) { /* we had found an interrupt endpoint, prepare irq pipe */
/* set up the IRQ pipe and handler */
ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255;
@@ -865,6 +1138,19 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t
if(cap[0]>(0x200000 * 10)) /* greater than 10 GByte */
cap[0]>>=16;
#endif
+#ifdef LITTLEENDIAN
+ cap[0] = ((unsigned long)(
+ (((unsigned long)(cap[0]) & (unsigned long)0x000000ffUL) << 24) |
+ (((unsigned long)(cap[0]) & (unsigned long)0x0000ff00UL) << 8) |
+ (((unsigned long)(cap[0]) & (unsigned long)0x00ff0000UL) >> 8) |
+ (((unsigned long)(cap[0]) & (unsigned long)0xff000000UL) >> 24) ));
+ cap[1] = ((unsigned long)(
+ (((unsigned long)(cap[1]) & (unsigned long)0x000000ffUL) << 24) |
+ (((unsigned long)(cap[1]) & (unsigned long)0x0000ff00UL) << 8) |
+ (((unsigned long)(cap[1]) & (unsigned long)0x00ff0000UL) >> 8) |
+ (((unsigned long)(cap[1]) & (unsigned long)0xff000000UL) >> 24) ));
+#endif
+ /* this assumes bigendian! */
cap[0]+=1;
capacity=&cap[0];
blksz=&cap[1];
@@ -881,5 +1167,5 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t
return 1;
}
-#endif
#endif /* CONFIG_USB_STORAGE */
+#endif /* CFG_CMD_USB */
generated by cgit v1.1 at 2024-11-01 17:55:56 +0000