summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
Diffstat (limited to 'common')
-rw-r--r--common/Makefile2
-rw-r--r--common/cmd_bdinfo.c31
-rw-r--r--common/cmd_mem.c55
-rw-r--r--common/cmd_otp.c163
-rw-r--r--common/cmd_reginfo.c45
-rw-r--r--common/cmd_strings.c49
-rw-r--r--common/environment.c7
-rw-r--r--common/fdt_support.c54
-rw-r--r--common/miiphyutil.c31
9 files changed, 354 insertions, 83 deletions
diff --git a/common/Makefile b/common/Makefile
index fbfa536..a88d1ef 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -76,6 +76,7 @@ COBJS-y += cmd_nand.o
COBJS-$(CONFIG_CMD_NET) += cmd_net.o
COBJS-y += cmd_nvedit.o
COBJS-y += cmd_onenand.o
+COBJS-$(CONFIG_CMD_OTP) += cmd_otp.o
ifdef CONFIG_PCI
COBJS-$(CONFIG_CMD_PCI) += cmd_pci.o
endif
@@ -86,6 +87,7 @@ COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o
COBJS-y += cmd_sata.o
COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o
COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
+COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o
COBJS-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
COBJS-$(CONFIG_CMD_USB) += cmd_usb.o
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 4e77461..bbb0192 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -273,6 +273,37 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
+#elif defined(CONFIG_BLACKFIN)
+
+int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int i;
+ bd_t *bd = gd->bd;
+
+ printf("U-Boot = %s\n", bd->bi_r_version);
+ printf("CPU = %s\n", bd->bi_cpu);
+ printf("Board = %s\n", bd->bi_board_name);
+ printf("VCO = %lu MHz\n", bd->bi_vco / 1000000);
+ printf("CCLK = %lu MHz\n", bd->bi_cclk / 1000000);
+ printf("SCLK = %lu MHz\n", bd->bi_sclk / 1000000);
+
+ print_num("boot_params", (ulong)bd->bi_boot_params);
+ print_num("memstart", (ulong)bd->bi_memstart);
+ print_num("memsize", (ulong)bd->bi_memsize);
+ print_num("flashstart", (ulong)bd->bi_flashstart);
+ print_num("flashsize", (ulong)bd->bi_flashsize);
+ print_num("flashoffset", (ulong)bd->bi_flashoffset);
+
+ puts("ethaddr =");
+ for (i = 0; i < 6; ++i)
+ printf("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+ puts("\nip_addr = ");
+ print_IPaddr(bd->bi_ip_addr);
+ printf("\nbaudrate = %d bps\n", bd->bi_baudrate);
+
+ return 0;
+}
+
#else /* ! PPC, which leaves MIPS */
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index a994211..000107f 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -154,9 +154,32 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
} while (nbytes > 0);
#else
- /* Print the lines. */
- print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
- addr += size*length;
+
+# if defined(CONFIG_BLACKFIN)
+ /* See if we're trying to display L1 inst */
+ if (addr_bfin_on_chip_mem(addr)) {
+ char linebuf[DISP_LINE_LEN];
+ ulong linebytes, nbytes = length * size;
+ do {
+ linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
+ memcpy(linebuf, (void *)addr, linebytes);
+ print_buffer(addr, linebuf, size, linebytes/size, DISP_LINE_LEN/size);
+
+ nbytes -= linebytes;
+ addr += linebytes;
+ if (ctrlc()) {
+ rc = 1;
+ break;
+ }
+ } while (nbytes > 0);
+ } else
+# endif
+
+ {
+ /* Print the lines. */
+ print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
+ addr += size*length;
+ }
#endif
dp_last_addr = addr;
@@ -308,6 +331,13 @@ int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
#endif
+#ifdef CONFIG_BLACKFIN
+ if (addr_bfin_on_chip_mem(addr1) || addr_bfin_on_chip_mem(addr2)) {
+ puts ("Comparison with L1 instruction memory not supported.\n\r");
+ return 0;
+ }
+#endif
+
ngood = 0;
while (count-- > 0) {
@@ -478,6 +508,14 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
#endif
+#ifdef CONFIG_BLACKFIN
+ /* See if we're copying to/from L1 inst */
+ if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
+ memcpy((void *)dest, (void *)addr, count * size);
+ return 0;
+ }
+#endif
+
while (count-- > 0) {
if (size == 4)
*((ulong *)dest) = *((ulong *)addr);
@@ -659,6 +697,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
vu_long *addr, *start, *end;
ulong val;
ulong readback;
+ int rcode = 0;
#if defined(CFG_ALT_MEMTEST)
vu_long addr_mask;
@@ -689,7 +728,6 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#else
ulong incr;
ulong pattern;
- int rcode = 0;
#endif
if (argc > 1) {
@@ -954,8 +992,8 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
incr = -incr;
}
- return rcode;
#endif
+ return rcode;
}
@@ -1006,6 +1044,13 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
}
#endif
+#ifdef CONFIG_BLACKFIN
+ if (addr_bfin_on_chip_mem(addr)) {
+ puts ("Can't modify L1 instruction in place. Use cp instead.\n\r");
+ return 0;
+ }
+#endif
+
/* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
diff --git a/common/cmd_otp.c b/common/cmd_otp.c
new file mode 100644
index 0000000..825fa34
--- /dev/null
+++ b/common/cmd_otp.c
@@ -0,0 +1,163 @@
+/*
+ * cmd_otp.c - interface to Blackfin on-chip One-Time-Programmable memory
+ *
+ * Copyright (c) 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* There are 512 128-bit "pages" (0x000 to 0x1FF).
+ * The pages are accessable as 64-bit "halfpages" (an upper and lower half).
+ * The pages are not part of the memory map. There is an OTP controller which
+ * handles scanning in/out of bits. While access is done through OTP MMRs,
+ * the bootrom provides C-callable helper functions to handle the interaction.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+
+#ifdef CONFIG_CMD_OTP
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/otp.h>
+
+static const char *otp_strerror(uint32_t err)
+{
+ switch (err) {
+ case 0: return "no error";
+ case OTP_WRITE_ERROR: return "OTP fuse write error";
+ case OTP_READ_ERROR: return "OTP fuse read error";
+ case OTP_ACC_VIO_ERROR: return "invalid OTP address";
+ case OTP_DATA_MULT_ERROR: return "multiple bad bits detected";
+ case OTP_ECC_MULT_ERROR: return "error in ECC bits";
+ case OTP_PREV_WR_ERROR: return "space already written";
+ case OTP_DATA_SB_WARN: return "single bad bit in half page";
+ case OTP_ECC_SB_WARN: return "single bad bit in ECC";
+ default: return "unknown error";
+ }
+}
+
+#define lowup(x) ((x) % 2 ? "upper" : "lower")
+
+int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ bool force = false;
+ if (!strcmp(argv[1], "--force")) {
+ force = true;
+ argv[1] = argv[0];
+ argv++;
+ --argc;
+ }
+
+ uint32_t (*otp_func)(uint32_t page, uint32_t flags, uint64_t *page_content);
+ if (!strcmp(argv[1], "read"))
+ otp_func = otp_read;
+ else if (!strcmp(argv[1], "write"))
+ otp_func = otp_write;
+ else {
+ usage:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ uint64_t *addr = (uint64_t *)simple_strtoul(argv[2], NULL, 16);
+ uint32_t page = simple_strtoul(argv[3], NULL, 16);
+ uint32_t flags, ret;
+ size_t i, count;
+ ulong half;
+
+ if (argc > 4)
+ count = simple_strtoul(argv[4], NULL, 16);
+ else
+ count = 2;
+
+ if (argc > 5) {
+ half = simple_strtoul(argv[5], NULL, 16);
+ if (half != 0 && half != 1) {
+ puts("Error: 'half' can only be '0' or '1'\n");
+ goto usage;
+ }
+ } else
+ half = 0;
+
+ /* do to the nature of OTP, make sure users are sure */
+ if (!force && otp_func == otp_write) {
+ printf(
+ "Writing one time programmable memory\n"
+ "Make sure your operating voltages and temperature are within spec\n"
+ " source address: 0x%p\n"
+ " OTP destination: %s page 0x%03X - %s page 0x%03X\n"
+ " number to write: %ld halfpages\n"
+ " type \"YES\" (no quotes) to confirm: ",
+ addr,
+ lowup(half), page,
+ lowup(half + count - 1), page + (half + count - 1) / 2,
+ half + count
+ );
+
+ i = 0;
+ while (1) {
+ if (tstc()) {
+ const char exp_ans[] = "YES\r";
+ char c;
+ putc(c = getc());
+ if (exp_ans[i++] != c) {
+ printf(" Aborting\n");
+ return 1;
+ } else if (!exp_ans[i]) {
+ puts("\n");
+ break;
+ }
+ }
+ }
+
+ /* Only supported in newer silicon ... enable writing */
+#if (0)
+ otp_command(OTP_INIT, ...);
+#else
+ *pOTP_TIMING = 0x32149485;
+#endif
+ }
+
+ printf("OTP memory %s: addr 0x%08lx page 0x%03X count %ld ... ",
+ argv[1], addr, page, count);
+
+ ret = 0;
+ for (i = half; i < count + half; ++i) {
+ flags = (i % 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF;
+ ret = otp_func(page, flags, addr);
+ if (ret & 0x1)
+ break;
+ else if (ret)
+ puts("W");
+ else
+ puts(".");
+ ++addr;
+ if (i % 2)
+ ++page;
+ }
+ if (ret & 0x1)
+ printf("\nERROR at page 0x%03X (%s-halfpage): 0x%03X: %s\n",
+ page, lowup(i), ret, otp_strerror(ret));
+ else
+ puts(" done\n");
+
+ if (otp_func == otp_write)
+ /* Only supported in newer silicon ... disable writing */
+#if (0)
+ otp_command(OTP_INIT, ...);
+#else
+ *pOTP_TIMING = 0x1485;
+#endif
+
+ return ret;
+}
+
+U_BOOT_CMD(otp, 6, 0, do_otp,
+ "otp - One-Time-Programmable sub-system\n",
+ "read <addr> <page> [count] [half]\n"
+ "otp write [--force] <addr> <page> [count] [half]\n"
+ " - read/write 'count' half-pages starting at page 'page' (offset 'half')\n");
+
+#endif
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index bb6aa30..980664d 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -329,16 +329,53 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
*(volatile ulong*)MPC5XXX_SDRAM_CS0CFG);
printf ("\tSDRAMCS1: %08X\n",
*(volatile ulong*)MPC5XXX_SDRAM_CS1CFG);
+
+#elif defined(CONFIG_BLACKFIN)
+ puts("\nSystem Configuration registers\n");
+
+ puts("\nPLL Registers\n");
+ printf("\tPLL_DIV: 0x%04x PLL_CTL: 0x%04x\n",
+ bfin_read_PLL_DIV(), bfin_read_PLL_CTL());
+ printf("\tPLL_STAT: 0x%04x PLL_LOCKCNT: 0x%04x\n",
+ bfin_read_PLL_STAT(), bfin_read_PLL_LOCKCNT());
+ printf("\tVR_CTL: 0x%04x\n", bfin_read_VR_CTL());
+
+ puts("\nEBIU AMC Registers\n");
+ printf("\tEBIU_AMGCTL: 0x%04x\n", bfin_read_EBIU_AMGCTL());
+ printf("\tEBIU_AMBCTL0: 0x%08x EBIU_AMBCTL1: 0x%08x\n",
+ bfin_read_EBIU_AMBCTL0(), bfin_read_EBIU_AMBCTL1());
+# ifdef EBIU_MODE
+ printf("\tEBIU_MBSCTL: 0x%08x EBIU_ARBSTAT: 0x%08x\n",
+ bfin_read_EBIU_MBSCTL(), bfin_read_EBIU_ARBSTAT());
+ printf("\tEBIU_MODE: 0x%08x EBIU_FCTL: 0x%08x\n",
+ bfin_read_EBIU_MODE(), bfin_read_EBIU_FCTL());
+# endif
+
+# ifdef EBIU_RSTCTL
+ puts("\nEBIU DDR Registers\n");
+ printf("\tEBIU_DDRCTL0: 0x%08x EBIU_DDRCTL1: 0x%08x\n",
+ bfin_read_EBIU_DDRCTL0(), bfin_read_EBIU_DDRCTL1());
+ printf("\tEBIU_DDRCTL2: 0x%08x EBIU_DDRCTL3: 0x%08x\n",
+ bfin_read_EBIU_DDRCTL2(), bfin_read_EBIU_DDRCTL3());
+ printf("\tEBIU_DDRQUE: 0x%08x EBIU_RSTCTL 0x%04x\n",
+ bfin_read_EBIU_DDRQUE(), bfin_read_EBIU_RSTCTL());
+ printf("\tEBIU_ERRADD: 0x%08x EBIU_ERRMST: 0x%04x\n",
+ bfin_read_EBIU_ERRADD(), bfin_read_EBIU_ERRMST());
+# else
+ puts("\nEBIU SDC Registers\n");
+ printf("\tEBIU_SDRRC: 0x%04x EBIU_SDBCTL: 0x%04x\n",
+ bfin_read_EBIU_SDRRC(), bfin_read_EBIU_SDBCTL());
+ printf("\tEBIU_SDSTAT: 0x%04x EBIU_SDGCTL: 0x%08x\n",
+ bfin_read_EBIU_SDSTAT(), bfin_read_EBIU_SDGCTL());
+# endif
+
#endif /* CONFIG_MPC5200 */
return 0;
}
/**************************************************/
-#if ( defined(CONFIG_8xx) || defined(CONFIG_405GP) || \
- defined(CONFIG_405EP) || defined(CONFIG_MPC5200) ) && \
- defined(CONFIG_CMD_REGINFO)
-
+#if defined(CONFIG_CMD_REGINFO)
U_BOOT_CMD(
reginfo, 2, 1, do_reginfo,
"reginfo - print register information\n",
diff --git a/common/cmd_strings.c b/common/cmd_strings.c
new file mode 100644
index 0000000..bbf56a0
--- /dev/null
+++ b/common/cmd_strings.c
@@ -0,0 +1,49 @@
+/*
+ * cmd_strings.c - just like `strings` command
+ *
+ * Copyright (c) 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+
+#ifdef CONFIG_CFG_STRINGS
+
+static char *start_addr, *last_addr;
+
+int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ if (argc == 1) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if ((flag & CMD_FLAG_REPEAT) == 0) {
+ start_addr = (char *)simple_strtoul(argv[1], NULL, 16);
+ if (argc > 2)
+ last_addr = (char *)simple_strtoul(argv[2], NULL, 16);
+ else
+ last_addr = (char *)-1;
+ }
+
+ char *addr = start_addr;
+ do {
+ printf("%s\n", addr);
+ addr += strlen(addr) + 1;
+ } while (addr[0] && addr < last_addr);
+
+ last_addr = addr + (last_addr - start_addr);
+ start_addr = addr;
+
+ return 0;
+}
+
+U_BOOT_CMD(strings, 3, 1, do_strings,
+ "strings - display strings\n",
+ "<addr> [byte count]\n"
+ " - display strings at <addr> for at least [byte count] or first double NUL\n");
+
+#endif
diff --git a/common/environment.c b/common/environment.c
index 24257f7..3b9914f 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -70,11 +70,16 @@
/*
* Macros to generate global absolutes.
*/
+#if defined(__bfin__)
+# define GEN_SET_VALUE(name, value) asm (".set " GEN_SYMNAME(name) ", " GEN_VALUE(value))
+#else
+# define GEN_SET_VALUE(name, value) asm (GEN_SYMNAME(name) " = " GEN_VALUE(value))
+#endif
#define GEN_SYMNAME(str) SYM_CHAR #str
#define GEN_VALUE(str) #str
#define GEN_ABS(name, value) \
asm (".globl " GEN_SYMNAME(name)); \
- asm (GEN_SYMNAME(name) " = " GEN_VALUE(value))
+ GEN_SET_VALUE(name, value)
/*
* Macros to transform values
diff --git a/common/fdt_support.c b/common/fdt_support.c
index a13c140..69eb667 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -30,9 +30,6 @@
#include <fdt_support.h>
#include <exports.h>
-#ifdef CONFIG_QE
-#include "../drivers/qe/qe.h"
-#endif
/*
* Global data (for the gd->bd)
*/
@@ -418,7 +415,7 @@ void do_fixup_by_path(void *fdt, const char *path, const char *prop,
{
#if defined(DEBUG)
int i;
- debug("Updating property '%s/%s' = ", node, prop);
+ debug("Updating property '%s/%s' = ", path, prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");
@@ -444,7 +441,7 @@ void do_fixup_by_prop(void *fdt,
int off;
#if defined(DEBUG)
int i;
- debug("Updating property '%s/%s' = ", node, prop);
+ debug("Updating property '%s' = ", prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");
@@ -471,7 +468,7 @@ void do_fixup_by_compat(void *fdt, const char *compat,
int off = -1;
#if defined(DEBUG)
int i;
- debug("Updating property '%s/%s' = ", node, prop);
+ debug("Updating property '%s' = ", prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");
@@ -617,49 +614,4 @@ void fdt_fixup_ethernet(void *fdt, bd_t *bd)
#endif
}
}
-
-#ifdef CONFIG_QE
-/*
- * If a QE firmware has been uploaded, then add the 'firmware' node under
- * the 'qe' node.
- */
-void fdt_fixup_qe_firmware(void *fdt)
-{
- struct qe_firmware_info *qe_fw_info;
- int node, ret;
-
- qe_fw_info = qe_get_firmware_info();
- if (!qe_fw_info)
- return;
-
- node = fdt_path_offset(fdt, "/qe");
- if (node < 0)
- return;
-
- /* We assume the node doesn't exist yet */
- node = fdt_add_subnode(fdt, node, "firmware");
- if (node < 0)
- return;
-
- ret = fdt_setprop(fdt, node, "extended-modes",
- &qe_fw_info->extended_modes, sizeof(u64));
- if (ret < 0)
- goto error;
-
- ret = fdt_setprop_string(fdt, node, "id", qe_fw_info->id);
- if (ret < 0)
- goto error;
-
- ret = fdt_setprop(fdt, node, "virtual-traps", qe_fw_info->vtraps,
- sizeof(qe_fw_info->vtraps));
- if (ret < 0)
- goto error;
-
- return;
-
-error:
- fdt_del_node(fdt, node);
-}
-#endif
-
#endif
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 281f0b2..eac8275 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -36,7 +36,6 @@
#include <net.h>
/* local debug macro */
-#define MII_DEBUG
#undef MII_DEBUG
#undef debug
@@ -261,31 +260,25 @@ int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
unsigned short tmp;
if (miiphy_read (devname, addr, PHY_PHYIDR2, &tmp) != 0) {
-#ifdef DEBUG
- puts ("PHY ID register 2 read failed\n");
-#endif
+ debug ("PHY ID register 2 read failed\n");
return (-1);
}
reg = tmp;
-#ifdef DEBUG
- printf ("PHY_PHYIDR2 @ 0x%x = 0x%04x\n", addr, reg);
-#endif
+ debug ("PHY_PHYIDR2 @ 0x%x = 0x%04x\n", addr, reg);
+
if (reg == 0xFFFF) {
/* No physical device present at this address */
return (-1);
}
if (miiphy_read (devname, addr, PHY_PHYIDR1, &tmp) != 0) {
-#ifdef DEBUG
- puts ("PHY ID register 1 read failed\n");
-#endif
+ debug ("PHY ID register 1 read failed\n");
return (-1);
}
reg |= tmp << 16;
-#ifdef DEBUG
- printf ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
-#endif
+ debug ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
+
*oui = (reg >> 10);
*model = (unsigned char)((reg >> 4) & 0x0000003F);
*rev = (unsigned char)(reg & 0x0000000F);
@@ -304,15 +297,11 @@ int miiphy_reset (char *devname, unsigned char addr)
int loop_cnt;
if (miiphy_read (devname, addr, PHY_BMCR, &reg) != 0) {
-#ifdef DEBUG
- printf ("PHY status read failed\n");
-#endif
+ debug ("PHY status read failed\n");
return (-1);
}
if (miiphy_write (devname, addr, PHY_BMCR, reg | 0x8000) != 0) {
-#ifdef DEBUG
- puts ("PHY reset failed\n");
-#endif
+ debug ("PHY reset failed\n");
return (-1);
}
#ifdef CONFIG_PHY_RESET_DELAY
@@ -327,9 +316,7 @@ int miiphy_reset (char *devname, unsigned char addr)
reg = 0x8000;
while (((reg & 0x8000) != 0) && (loop_cnt++ < 1000000)) {
if (miiphy_read (devname, addr, PHY_BMCR, &reg) != 0) {
-# ifdef DEBUG
- puts ("PHY status read failed\n");
-# endif
+ debug ("PHY status read failed\n");
return (-1);
}
}
generated by cgit v1.1 at 2024-12-19 20:55:51 +0000