summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
Diffstat (limited to 'common')
-rw-r--r--common/cmd_bedbug.c424
-rw-r--r--common/cmd_bootm.c931
-rw-r--r--common/console.c532
3 files changed, 1887 insertions, 0 deletions
diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c
new file mode 100644
index 0000000..75b74d5
--- /dev/null
+++ b/common/cmd_bedbug.c
@@ -0,0 +1,424 @@
+/*
+ * BedBug Functions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/ctype.h>
+#include <net.h>
+
+#include <cmd_bedbug.h>
+#include <bedbug/bedbug.h>
+#include <bedbug/regs.h>
+#include <bedbug/ppc.h>
+#include <elf.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+
+#ifndef MAX
+#define MAX(a,b) ((a) > (b) ? (a) : (b))
+#endif
+
+extern void show_regs __P((struct pt_regs*));
+extern int run_command __P((const char*, int));
+extern char console_buffer[];
+
+ulong dis_last_addr = 0; /* Last address disassembled */
+ulong dis_last_len = 20; /* Default disassembler length */
+CPU_DEBUG_CTX bug_ctx; /* Bedbug context structure */
+
+
+/* ======================================================================
+ * U-Boot's puts function does not append a newline, so the bedbug stuff
+ * will use this for the output of the dis/assembler.
+ * ====================================================================== */
+
+int bedbug_puts(const char *str)
+{
+ /* -------------------------------------------------- */
+
+ printf( "%s\r\n", str );
+ return 0;
+} /* bedbug_puts */
+
+
+
+/* ======================================================================
+ * Initialize the bug_ctx structure used by the bedbug debugger. This is
+ * specific to the CPU since each has different debug registers and
+ * settings.
+ * ====================================================================== */
+
+void bedbug_init( void )
+{
+ /* -------------------------------------------------- */
+
+#if defined(CONFIG_4xx)
+ void bedbug405_init( void );
+ bedbug405_init();
+#elif defined(CONFIG_MPC860)
+ void bedbug860_init( void );
+ bedbug860_init();
+#endif
+
+#if defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260)
+ /* Processors that are 603e core based */
+ void bedbug603e_init( void );
+
+ bedbug603e_init();
+#endif
+
+ return;
+} /* bedbug_init */
+
+
+
+/* ======================================================================
+ * Entry point from the interpreter to the disassembler. Repeated calls
+ * will resume from the last disassembled address.
+ * ====================================================================== */
+int do_bedbug_dis (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong addr; /* Address to start disassembly from */
+ ulong len; /* # of instructions to disassemble */
+ /* -------------------------------------------------- */
+
+ /* Setup to go from the last address if none is given */
+ addr = dis_last_addr;
+ len = dis_last_len;
+
+ if (argc < 2)
+ {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if(( flag & CMD_FLAG_REPEAT ) == 0 )
+ {
+ /* New command */
+ addr = simple_strtoul( argv[1], NULL, 16 );
+
+ /* If an extra param is given then it is the length */
+ if( argc > 2 )
+ len = simple_strtoul( argv[2], NULL, 16 );
+ }
+
+ /* Run the disassembler */
+ disppc( (unsigned char *)addr, 0, len, bedbug_puts, F_RADHEX );
+
+ dis_last_addr = addr + (len * 4);
+ dis_last_len = len;
+ return 0;
+} /* do_bedbug_dis */
+
+
+
+/* ======================================================================
+ * Entry point from the interpreter to the assembler. Assembles
+ * instructions in consecutive memory locations until a '.' (period) is
+ * entered on a line by itself.
+ * ====================================================================== */
+int do_bedbug_asm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ long mem_addr; /* Address to assemble into */
+ unsigned long instr; /* Machine code for text */
+ char prompt[ 15 ]; /* Prompt string for user input */
+ int asm_err; /* Error code from the assembler*/
+ /* -------------------------------------------------- */
+ int rcode = 0;
+
+ if (argc < 2)
+ {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ printf( "\nEnter '.' when done\n" );
+ mem_addr = simple_strtoul( argv[ 1 ], NULL, 16 );
+
+ while( 1 )
+ {
+ putc( '\n' );
+ disppc( (unsigned char *)mem_addr, 0, 1, bedbug_puts, F_RADHEX );
+
+ sprintf( prompt, "%08lx: ", mem_addr );
+ readline( prompt );
+
+ if( console_buffer[ 0 ] && strcmp( console_buffer, "." ))
+ {
+ if(( instr = asmppc( mem_addr, console_buffer, &asm_err )) != 0 )
+ {
+ *(unsigned long *)mem_addr = instr;
+ mem_addr += 4;
+ }
+ else
+ {
+ printf( "*** Error: %s ***\n", asm_error_str( asm_err ));
+ rcode = 1;
+ }
+ }
+ else
+ {
+ break;
+ }
+ }
+ return rcode;
+} /* do_bedbug_asm */
+
+
+
+/* ======================================================================
+ * Used to set a break point from the interpreter. Simply calls into the
+ * CPU-specific break point set routine.
+ * ====================================================================== */
+
+int do_bedbug_break (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ /* -------------------------------------------------- */
+ if( bug_ctx.do_break )
+ (*bug_ctx.do_break)( cmdtp, flag, argc, argv );
+ return 0;
+
+} /* do_bedbug_break */
+
+
+
+/* ======================================================================
+ * Called from the debug interrupt routine. Simply calls the CPU-specific
+ * breakpoint handling routine.
+ * ====================================================================== */
+
+void do_bedbug_breakpoint (struct pt_regs *regs)
+{
+ /* -------------------------------------------------- */
+
+ if( bug_ctx.break_isr )
+ (*bug_ctx.break_isr)( regs );
+
+ return;
+} /* do_bedbug_breakpoint */
+
+
+
+/* ======================================================================
+ * Called from the CPU-specific breakpoint handling routine. Enter a
+ * mini main loop until the stopped flag is cleared from the breakpoint
+ * context.
+ *
+ * This handles the parts of the debugger that are common to all CPU's.
+ * ====================================================================== */
+
+void bedbug_main_loop( unsigned long addr, struct pt_regs *regs )
+{
+ int len; /* Length of command line */
+ int flag; /* Command flags */
+ int rc = 0; /* Result from run_command*/
+ char prompt_str[ 20 ]; /* Prompt string */
+ static char lastcommand[ CFG_CBSIZE ] = {0}; /* previous command */
+ /* -------------------------------------------------- */
+
+ if( bug_ctx.clear )
+ (*bug_ctx.clear)( bug_ctx.current_bp );
+
+ printf( "Breakpoint %d: ", bug_ctx.current_bp );
+ disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
+
+ bug_ctx.stopped = 1;
+ bug_ctx.regs = regs;
+
+ sprintf( prompt_str, "BEDBUG.%d =>", bug_ctx.current_bp );
+
+ /* A miniature main loop */
+ while( bug_ctx.stopped )
+ {
+ len = readline( prompt_str );
+
+ flag = 0; /* assume no special flags for now */
+
+ if (len > 0)
+ strcpy( lastcommand, console_buffer );
+ else if( len == 0 )
+ flag |= CMD_FLAG_REPEAT;
+
+ if (len == -1)
+ printf ("<INTERRUPT>\n");
+ else
+ rc = run_command( lastcommand, flag );
+
+ if (rc <= 0) {
+ /* invalid command or not repeatable, forget it */
+ lastcommand[0] = 0;
+ }
+ }
+
+ bug_ctx.regs = NULL;
+ bug_ctx.current_bp = 0;
+
+ return;
+} /* bedbug_main_loop */
+
+
+
+/* ======================================================================
+ * Interpreter command to continue from a breakpoint. Just clears the
+ * stopped flag in the context so that the breakpoint routine will
+ * return.
+ * ====================================================================== */
+int do_bedbug_continue (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+
+{
+ /* -------------------------------------------------- */
+
+ if( ! bug_ctx.stopped )
+ {
+ printf( "Not at a breakpoint\n" );
+ return 1;
+ }
+
+ bug_ctx.stopped = 0;
+ return 0;
+} /* do_bedbug_continue */
+
+
+
+/* ======================================================================
+ * Interpreter command to continue to the next instruction, stepping into
+ * subroutines. Works by calling the find_next_addr() routine to compute
+ * the address passes control to the CPU-specific set breakpoint routine
+ * for the current breakpoint number.
+ * ====================================================================== */
+int do_bedbug_step (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned long addr; /* Address to stop at */
+ /* -------------------------------------------------- */
+
+ if( ! bug_ctx.stopped )
+ {
+ printf( "Not at a breakpoint\n" );
+ return 1;
+ }
+
+ if( !find_next_address( (unsigned char *)&addr, FALSE, bug_ctx.regs ))
+ return 1;
+
+ if( bug_ctx.set )
+ (*bug_ctx.set)( bug_ctx.current_bp, addr );
+
+ bug_ctx.stopped = 0;
+ return 0;
+} /* do_bedbug_step */
+
+
+
+/* ======================================================================
+ * Interpreter command to continue to the next instruction, stepping over
+ * subroutines. Works by calling the find_next_addr() routine to compute
+ * the address passes control to the CPU-specific set breakpoint routine
+ * for the current breakpoint number.
+ * ====================================================================== */
+int do_bedbug_next (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned long addr; /* Address to stop at */
+ /* -------------------------------------------------- */
+
+ if( ! bug_ctx.stopped )
+ {
+ printf( "Not at a breakpoint\n" );
+ return 1;
+ }
+
+ if( !find_next_address( (unsigned char *)&addr, TRUE, bug_ctx.regs ))
+ return 1;
+
+ if( bug_ctx.set )
+ (*bug_ctx.set)( bug_ctx.current_bp, addr );
+
+ bug_ctx.stopped = 0;
+ return 0;
+} /* do_bedbug_next */
+
+
+
+/* ======================================================================
+ * Interpreter command to print the current stack. This assumes an EABI
+ * architecture, so it starts with GPR R1 and works back up the stack.
+ * ====================================================================== */
+int do_bedbug_stack (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ unsigned long sp; /* Stack pointer */
+ unsigned long func; /* LR from stack */
+ int depth; /* Stack iteration level */
+ int skip = 1; /* Flag to skip the first entry */
+ unsigned long top; /* Top of memory address */
+ /* -------------------------------------------------- */
+
+ if( ! bug_ctx.stopped )
+ {
+ printf( "Not at a breakpoint\n" );
+ return 1;
+ }
+
+ top = gd->bd->bi_memstart + gd->bd->bi_memsize;
+ depth = 0;
+
+ printf( "Depth PC\n" );
+ printf( "----- --------\n" );
+ printf( "%5d %08lx\n", depth++, bug_ctx.regs->nip );
+
+ sp = bug_ctx.regs->gpr[ 1 ];
+ func = *(unsigned long *)(sp+4);
+
+ while(( func < top ) && ( sp < top ))
+ {
+ if( !skip )
+ printf( "%5d %08lx\n", depth++, func );
+ else
+ --skip;
+
+ sp = *(unsigned long *)sp;
+ func = *(unsigned long *)(sp+4);
+ }
+ return 0;
+} /* do_bedbug_stack */
+
+
+
+/* ======================================================================
+ * Interpreter command to dump the registers. Calls the CPU-specific
+ * show registers routine.
+ * ====================================================================== */
+int do_bedbug_rdump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ /* -------------------------------------------------- */
+
+ if( ! bug_ctx.stopped )
+ {
+ printf( "Not at a breakpoint\n" );
+ return 1;
+ }
+
+ show_regs( bug_ctx.regs );
+ return 0;
+} /* do_bedbug_rdump */
+
+
+/* ====================================================================== */
+#endif /* CFG_CMD_BEDBUG */
+
+
+/*
+ * Copyright (c) 2001 William L. Pitts
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are freely
+ * permitted provided that the above copyright notice and this
+ * paragraph and the following disclaimer are duplicated in all
+ * such forms.
+ *
+ * This software is provided "AS IS" and without any express or
+ * implied warranties, including, without limitation, the implied
+ * warranties of merchantability and fitness for a particular
+ * purpose.
+ */
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
new file mode 100644
index 0000000..e8ce40d
--- /dev/null
+++ b/common/cmd_bootm.c
@@ -0,0 +1,931 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Boot support
+ */
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <cmd_boot.h>
+#include <image.h>
+#include <malloc.h>
+#include <zlib.h>
+#include <asm/byteorder.h>
+#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_TIMESTAMP)
+#include <rtc.h>
+#endif
+
+#ifdef CFG_HUSH_PARSER
+#include <hush.h>
+#endif
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+#ifdef CFG_INIT_RAM_LOCK
+#include <asm/cache.h>
+#endif
+
+/*
+ * Some systems (for example LWMON) have very short watchdog periods;
+ * we must make sure to split long operations like memmove() or
+ * crc32() into reasonable chunks.
+ */
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+# define CHUNKSZ (64 * 1024)
+#endif
+
+int gunzip (void *, int, unsigned char *, int *);
+
+static void *zalloc(void *, unsigned, unsigned);
+static void zfree(void *, void *, unsigned);
+
+#if (CONFIG_COMMANDS & CFG_CMD_IMI)
+static int image_info (unsigned long addr);
+#endif
+static void print_type (image_header_t *hdr);
+
+/*
+ * Continue booting an OS image; caller already has:
+ * - copied image header to global variable `header'
+ * - checked header magic number, checksums (both header & image),
+ * - verified image architecture (PPC) and type (KERNEL or MULTI),
+ * - loaded (first part of) image to header load address,
+ * - disabled interrupts.
+ */
+typedef void boot_os_Fcn (cmd_tbl_t *cmdtp, int flag,
+ int argc, char *argv[],
+ ulong addr, /* of image to boot */
+ ulong *len_ptr, /* multi-file image length table */
+ int verify); /* getenv("verify")[0] != 'n' */
+
+#ifndef CONFIG_ARM
+static boot_os_Fcn do_bootm_linux;
+#else
+extern boot_os_Fcn do_bootm_linux;
+#endif
+static boot_os_Fcn do_bootm_netbsd;
+#if (CONFIG_COMMANDS & CFG_CMD_ELF)
+static boot_os_Fcn do_bootm_vxworks;
+static boot_os_Fcn do_bootm_qnxelf;
+int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] );
+int do_bootelf (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] );
+#endif /* CFG_CMD_ELF */
+
+image_header_t header;
+
+ulong load_addr = CFG_LOAD_ADDR; /* Default Load Address */
+
+int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong iflag;
+ ulong addr;
+ ulong data, len, checksum;
+ ulong *len_ptr;
+ int i, verify;
+ char *name, *s;
+ int (*appl)(cmd_tbl_t *, int, int, char *[]);
+ image_header_t *hdr = &header;
+
+ s = getenv ("verify");
+ verify = (s && (*s == 'n')) ? 0 : 1;
+
+ if (argc < 2) {
+ addr = load_addr;
+ } else {
+ addr = simple_strtoul(argv[1], NULL, 16);
+ }
+
+ SHOW_BOOT_PROGRESS (1);
+ printf ("## Booting image at %08lx ...\n", addr);
+
+ /* Copy header so we can blank CRC field for re-calculation */
+ memmove (&header, (char *)addr, sizeof(image_header_t));
+
+ if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+ printf ("Bad Magic Number\n");
+ SHOW_BOOT_PROGRESS (-1);
+ return 1;
+ }
+ SHOW_BOOT_PROGRESS (2);
+
+ data = (ulong)&header;
+ len = sizeof(image_header_t);
+
+ checksum = ntohl(hdr->ih_hcrc);
+ hdr->ih_hcrc = 0;
+
+ if (crc32 (0, (char *)data, len) != checksum) {
+ printf ("Bad Header Checksum\n");
+ SHOW_BOOT_PROGRESS (-2);
+ return 1;
+ }
+ SHOW_BOOT_PROGRESS (3);
+
+ /* for multi-file images we need the data part, too */
+ print_image_hdr ((image_header_t *)addr);
+
+ data = addr + sizeof(image_header_t);
+ len = ntohl(hdr->ih_size);
+
+ if (verify) {
+ printf (" Verifying Checksum ... ");
+ if (crc32 (0, (char *)data, len) != ntohl(hdr->ih_dcrc)) {
+ printf ("Bad Data CRC\n");
+ SHOW_BOOT_PROGRESS (-3);
+ return 1;
+ }
+ printf ("OK\n");
+ }
+ SHOW_BOOT_PROGRESS (4);
+
+ len_ptr = (ulong *)data;
+
+ if (hdr->ih_arch != IH_CPU_PPC && hdr->ih_arch != IH_CPU_ARM) {
+ printf ("Unsupported Architecture\n");
+ SHOW_BOOT_PROGRESS (-4);
+ return 1;
+ }
+ SHOW_BOOT_PROGRESS (5);
+
+ switch (hdr->ih_type) {
+ case IH_TYPE_STANDALONE: name = "Standalone Application";
+ break;
+ case IH_TYPE_KERNEL: name = "Kernel Image";
+ break;
+ case IH_TYPE_MULTI: name = "Multi-File Image";
+ len = ntohl(len_ptr[0]);
+ /* OS kernel is always the first image */
+ data += 8; /* kernel_len + terminator */
+ for (i=1; len_ptr[i]; ++i)
+ data += 4;
+ break;
+ default: printf ("Wrong Image Type for %s command\n", cmdtp->name);
+ SHOW_BOOT_PROGRESS (-5);
+ return 1;
+ }
+ SHOW_BOOT_PROGRESS (6);
+
+ /*
+ * We have reached the point of no return: we are going to
+ * overwrite all exception vector code, so we cannot easily
+ * recover from any failures any more...
+ */
+
+ iflag = disable_interrupts();
+
+ switch (hdr->ih_comp) {
+ case IH_COMP_NONE:
+ if(hdr->ih_load == addr) {
+ printf (" XIP %s ... ", name);
+ } else {
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+ size_t l = len;
+ void *to = (void *)ntohl(hdr->ih_load);
+ void *from = (void *)data;
+
+ printf (" Loading %s ... ", name);
+
+ while (l > 0) {
+ size_t tail = (l > CHUNKSZ) ? CHUNKSZ : l;
+ WATCHDOG_RESET();
+ memmove (to, from, tail);
+ to += tail;
+ from += tail;
+ l -= tail;
+ }
+#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */
+ memmove ((void *) ntohl(hdr->ih_load), (uchar *)data, len);
+#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
+ }
+ break;
+ case IH_COMP_GZIP:
+ printf (" Uncompressing %s ... ", name);
+ if (gunzip ((void *)ntohl(hdr->ih_load), 0x400000,
+ (uchar *)data, (int *)&len) != 0) {
+ printf ("GUNZIP ERROR - must RESET board to recover\n");
+ SHOW_BOOT_PROGRESS (-6);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+ break;
+ default:
+ if (iflag)
+ enable_interrupts();
+ printf ("Unimplemented compression type %d\n", hdr->ih_comp);
+ SHOW_BOOT_PROGRESS (-7);
+ return 1;
+ }
+ printf ("OK\n");
+ SHOW_BOOT_PROGRESS (7);
+
+ switch (hdr->ih_type) {
+ case IH_TYPE_STANDALONE:
+ appl = (int (*)(cmd_tbl_t *, int, int, char *[]))ntohl(hdr->ih_ep);
+ if (iflag)
+ enable_interrupts();
+
+ (*appl)(cmdtp, flag, argc-1, &argv[1]);
+ break;
+ case IH_TYPE_KERNEL:
+ case IH_TYPE_MULTI:
+ /* handled below */
+ break;
+ default:
+ if (iflag)
+ enable_interrupts();
+ printf ("Can't boot image type %d\n", hdr->ih_type);
+ SHOW_BOOT_PROGRESS (-8);
+ return 1;
+ }
+ SHOW_BOOT_PROGRESS (8);
+
+ switch (hdr->ih_os) {
+ default: /* handled by (original) Linux case */
+ case IH_OS_LINUX:
+ do_bootm_linux (cmdtp, flag, argc, argv,
+ addr, len_ptr, verify);
+ break;
+ case IH_OS_NETBSD:
+ do_bootm_netbsd (cmdtp, flag, argc, argv,
+ addr, len_ptr, verify);
+ break;
+#if (CONFIG_COMMANDS & CFG_CMD_ELF)
+ case IH_OS_VXWORKS:
+ do_bootm_vxworks (cmdtp, flag, argc, argv,
+ addr, len_ptr, verify);
+ break;
+ case IH_OS_QNX:
+ do_bootm_qnxelf (cmdtp, flag, argc, argv,
+ addr, len_ptr, verify);
+ break;
+#endif /* CFG_CMD_ELF */
+ }
+
+ SHOW_BOOT_PROGRESS (-9);
+#ifdef DEBUG
+ printf ("\n## Control returned to monitor - resetting...\n");
+ do_reset (cmdtp, flag, argc, argv);
+#endif
+ return 1;
+}
+
+#ifndef CONFIG_ARM
+static void
+do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
+ int argc, char *argv[],
+ ulong addr,
+ ulong *len_ptr,
+ int verify)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ ulong sp;
+ ulong len, checksum;
+ ulong initrd_start, initrd_end;
+ ulong cmd_start, cmd_end;
+ ulong initrd_high;
+ ulong data;
+ char *cmdline;
+ char *s;
+ bd_t *kbd;
+ void (*kernel)(bd_t *, ulong, ulong, ulong, ulong);
+ image_header_t *hdr = &header;
+
+ if ((s = getenv ("initrd_high")) != NULL) {
+ /* a value of "no" or a similar string will act like 0,
+ * turning the "load high" feature off. This is intentional.
+ */
+ initrd_high = simple_strtoul(s, NULL, 16);
+ } else { /* not set, no restrictions to load high */
+ initrd_high = ~0;
+ }
+
+ /*
+ * Booting a (Linux) kernel image
+ *
+ * Allocate space for command line and board info - the
+ * address should be as high as possible within the reach of
+ * the kernel (see CFG_BOOTMAPSZ settings), but in unused
+ * memory, which means far enough below the current stack
+ * pointer.
+ */
+
+ asm( "mr %0,1": "=r"(sp) : );
+
+#ifdef DEBUG
+ printf ("## Current stack ends at 0x%08lX ", sp);
+#endif
+ sp -= 2048; /* just to be sure */
+ if (sp > CFG_BOOTMAPSZ)
+ sp = CFG_BOOTMAPSZ;
+ sp &= ~0xF;
+
+#ifdef DEBUG
+ printf ("=> set upper limit to 0x%08lX\n", sp);
+#endif
+ cmdline = (char *)((sp - CFG_BARGSIZE) & ~0xF);
+ kbd = (bd_t *)(((ulong)cmdline - sizeof(bd_t)) & ~0xF);
+
+ if ((s = getenv("bootargs")) == NULL)
+ s = "";
+
+ strcpy (cmdline, s);
+
+ cmd_start = (ulong)&cmdline[0];
+ cmd_end = cmd_start + strlen(cmdline);
+
+ *kbd = *(gd->bd);
+
+#ifdef DEBUG
+ printf ("## cmdline at 0x%08lX ... 0x%08lX\n", cmd_start, cmd_end);
+
+ do_bdinfo (NULL, 0, 0, NULL);
+#endif
+
+ if ((s = getenv ("clocks_in_mhz")) != NULL) {
+ /* convert all clock information to MHz */
+ kbd->bi_intfreq /= 1000000L;
+ kbd->bi_busfreq /= 1000000L;
+#if defined(CONFIG_8260)
+ kbd->bi_cpmfreq /= 1000000L;
+ kbd->bi_brgfreq /= 1000000L;
+ kbd->bi_sccfreq /= 1000000L;
+ kbd->bi_vco /= 1000000L;
+#endif /* CONFIG_8260 */
+ }
+
+ kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep;
+
+ /*
+ * Check if there is an initrd image
+ */
+ if (argc >= 3) {
+ SHOW_BOOT_PROGRESS (9);
+
+ addr = simple_strtoul(argv[2], NULL, 16);
+
+ printf ("## Loading RAMDisk Image at %08lx ...\n", addr);
+
+ /* Copy header so we can blank CRC field for re-calculation */
+ memmove (&header, (char *)addr, sizeof(image_header_t));
+
+ if (hdr->ih_magic != IH_MAGIC) {
+ printf ("Bad Magic Number\n");
+ SHOW_BOOT_PROGRESS (-10);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+
+ data = (ulong)&header;
+ len = sizeof(image_header_t);
+
+ checksum = hdr->ih_hcrc;
+ hdr->ih_hcrc = 0;
+
+ if (crc32 (0, (char *)data, len) != checksum) {
+ printf ("Bad Header Checksum\n");
+ SHOW_BOOT_PROGRESS (-11);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+
+ SHOW_BOOT_PROGRESS (10);
+
+ print_image_hdr (hdr);
+
+ data = addr + sizeof(image_header_t);
+ len = hdr->ih_size;
+
+ if (verify) {
+ ulong csum = 0;
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+ ulong cdata = data, edata = cdata + len;
+#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
+
+ printf (" Verifying Checksum ... ");
+
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+
+ while (cdata < edata) {
+ ulong chunk = edata - cdata;
+
+ if (chunk > CHUNKSZ)
+ chunk = CHUNKSZ;
+ csum = crc32 (csum, (char *)cdata, chunk);
+ cdata += chunk;
+
+ WATCHDOG_RESET();
+ }
+#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */
+ csum = crc32 (0, (char *)data, len);
+#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
+
+ if (csum != hdr->ih_dcrc) {
+ printf ("Bad Data CRC\n");
+ SHOW_BOOT_PROGRESS (-12);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+ printf ("OK\n");
+ }
+
+ SHOW_BOOT_PROGRESS (11);
+
+ if ((hdr->ih_os != IH_OS_LINUX) ||
+ (hdr->ih_arch != IH_CPU_PPC) ||
+ (hdr->ih_type != IH_TYPE_RAMDISK) ) {
+ printf ("No Linux PPC Ramdisk Image\n");
+ SHOW_BOOT_PROGRESS (-13);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+
+ /*
+ * Now check if we have a multifile image
+ */
+ } else if ((hdr->ih_type==IH_TYPE_MULTI) && (len_ptr[1])) {
+ u_long tail = ntohl(len_ptr[0]) % 4;
+ int i;
+
+ SHOW_BOOT_PROGRESS (13);
+
+ /* skip kernel length and terminator */
+ data = (ulong)(&len_ptr[2]);
+ /* skip any additional image length fields */
+ for (i=1; len_ptr[i]; ++i)
+ data += 4;
+ /* add kernel length, and align */
+ data += ntohl(len_ptr[0]);
+ if (tail) {
+ data += 4 - tail;
+ }
+
+ len = ntohl(len_ptr[1]);
+
+ } else {
+ /*
+ * no initrd image
+ */
+ SHOW_BOOT_PROGRESS (14);
+
+ len = data = 0;
+ }
+
+#ifdef DEBUG
+ if (!data) {
+ printf ("No initrd\n");
+ }
+#endif
+
+ if (data) {
+ initrd_start = (ulong)kbd - len;
+ initrd_start &= ~(4096 - 1); /* align on page */
+
+ if (initrd_high) {
+ ulong nsp;
+
+ /*
+ * the inital ramdisk does not need to be within
+ * CFG_BOOTMAPSZ as it is not accessed until after
+ * the mm system is initialised.
+ *
+ * do the stack bottom calculation again and see if
+ * the initrd will fit just below the monitor stack
+ * bottom without overwriting the area allocated
+ * above for command line args and board info.
+ */
+ asm( "mr %0,1": "=r"(nsp) : );
+ nsp -= 2048; /* just to be sure */
+ nsp &= ~0xF;
+ if (nsp > initrd_high) /* limit as specified */
+ nsp = initrd_high;
+ nsp -= len;
+ nsp &= ~(4096 - 1); /* align on page */
+ if (nsp >= sp)
+ initrd_start = nsp;
+ }
+
+ SHOW_BOOT_PROGRESS (12);
+#ifdef DEBUG
+ printf ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n",
+ data, data + len - 1, len, len);
+#endif
+ initrd_end = initrd_start + len;
+ printf (" Loading Ramdisk to %08lx, end %08lx ... ",
+ initrd_start, initrd_end);
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+ {
+ size_t l = len;
+ void *to = (void *)initrd_start;
+ void *from = (void *)data;
+
+ while (l > 0) {
+ size_t tail = (l > CHUNKSZ) ? CHUNKSZ : l;
+ WATCHDOG_RESET();
+ memmove (to, from, tail);
+ to += tail;
+ from += tail;
+ l -= tail;
+ }
+ }
+#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */
+ memmove ((void *)initrd_start, (void *)data, len);
+#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
+ printf ("OK\n");
+ } else {
+ initrd_start = 0;
+ initrd_end = 0;
+ }
+
+#ifdef DEBUG
+ printf ("## Transferring control to Linux (at address %08lx) ...\n",
+ (ulong)kernel);
+#endif
+ SHOW_BOOT_PROGRESS (15);
+
+#ifdef CFG_INIT_RAM_LOCK
+ unlock_ram_in_cache();
+#endif
+ /*
+ * Linux Kernel Parameters:
+ * r3: ptr to board info data
+ * r4: initrd_start or 0 if no initrd
+ * r5: initrd_end - unused if r4 is 0
+ * r6: Start of command line string
+ * r7: End of command line string
+ */
+ (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+}
+#endif /* CONFIG_ARM */
+
+static void
+do_bootm_netbsd (cmd_tbl_t *cmdtp, int flag,
+ int argc, char *argv[],
+ ulong addr,
+ ulong *len_ptr,
+ int verify)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ image_header_t *hdr = &header;
+
+ void (*loader)(bd_t *, image_header_t *, char *, char *);
+ image_header_t *img_addr;
+ char *consdev;
+ char *cmdline;
+
+
+ /*
+ * Booting a (NetBSD) kernel image
+ *
+ * This process is pretty similar to a standalone application:
+ * The (first part of an multi-) image must be a stage-2 loader,
+ * which in turn is responsible for loading & invoking the actual
+ * kernel. The only differences are the parameters being passed:
+ * besides the board info strucure, the loader expects a command
+ * line, the name of the console device, and (optionally) the
+ * address of the original image header.
+ */
+
+ img_addr = 0;
+ if ((hdr->ih_type==IH_TYPE_MULTI) && (len_ptr[1]))
+ img_addr = (image_header_t *) addr;
+
+
+ consdev = "";
+#if defined (CONFIG_8xx_CONS_SMC1)
+ consdev = "smc1";
+#elif defined (CONFIG_8xx_CONS_SMC2)
+ consdev = "smc2";
+#elif defined (CONFIG_8xx_CONS_SCC2)
+ consdev = "scc2";
+#elif defined (CONFIG_8xx_CONS_SCC3)
+ consdev = "scc3";
+#endif
+
+ if (argc > 2) {
+ ulong len;
+ int i;
+
+ for (i=2, len=0 ; i<argc ; i+=1)
+ len += strlen (argv[i]) + 1;
+ cmdline = malloc (len);
+
+ for (i=2, len=0 ; i<argc ; i+=1) {
+ if (i > 2)
+ cmdline[len++] = ' ';
+ strcpy (&cmdline[len], argv[i]);
+ len += strlen (argv[i]);
+ }
+ } else if ((cmdline = getenv("bootargs")) == NULL) {
+ cmdline = "";
+ }
+
+ loader = (void (*)(bd_t *, image_header_t *, char *, char *)) hdr->ih_ep;
+
+ printf ("## Transferring control to NetBSD stage-2 loader (at address %08lx) ...\n",
+ (ulong)loader);
+
+ SHOW_BOOT_PROGRESS (15);
+
+ /*
+ * NetBSD Stage-2 Loader Parameters:
+ * r3: ptr to board info data
+ * r4: image address
+ * r5: console device
+ * r6: boot args string
+ */
+ (*loader) (gd->bd, img_addr, consdev, cmdline);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_BOOTD)
+int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int rcode = 0;
+#ifndef CFG_HUSH_PARSER
+ if (run_command (getenv ("bootcmd"), flag) < 0) rcode = 1;
+#else
+ if (parse_string_outer(getenv("bootcmd"),
+ FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP) != 0 ) rcode = 1;
+#endif
+ return rcode;
+}
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_IMI)
+int do_iminfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int arg;
+ ulong addr;
+ int rcode=0;
+
+ if (argc < 2) {
+ return image_info (load_addr);
+ }
+
+ for (arg=1; arg <argc; ++arg) {
+ addr = simple_strtoul(argv[arg], NULL, 16);
+ if (image_info (addr) != 0) rcode = 1;
+ }
+ return rcode;
+}
+
+static int image_info (ulong addr)
+{
+ ulong data, len, checksum;
+ image_header_t *hdr = &header;
+
+ printf ("\n## Checking Image at %08lx ...\n", addr);
+
+ /* Copy header so we can blank CRC field for re-calculation */
+ memmove (&header, (char *)addr, sizeof(image_header_t));
+
+ if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+ printf (" Bad Magic Number\n");
+ return 1;
+ }
+
+ data = (ulong)&header;
+ len = sizeof(image_header_t);
+
+ checksum = ntohl(hdr->ih_hcrc);
+ hdr->ih_hcrc = 0;
+
+ if (crc32 (0, (char *)data, len) != checksum) {
+ printf (" Bad Header Checksum\n");
+ return 1;
+ }
+
+ /* for multi-file images we need the data part, too */
+ print_image_hdr ((image_header_t *)addr);
+
+ data = addr + sizeof(image_header_t);
+ len = ntohl(hdr->ih_size);
+
+ printf (" Verifying Checksum ... ");
+ if (crc32 (0, (char *)data, len) != ntohl(hdr->ih_dcrc)) {
+ printf (" Bad Data CRC\n");
+ return 1;
+ }
+ printf ("OK\n");
+ return 0;
+}
+#endif /* CFG_CMD_IMI */
+
+void
+print_image_hdr (image_header_t *hdr)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_TIMESTAMP)
+ time_t timestamp = (time_t)ntohl(hdr->ih_time);
+ struct rtc_time tm;
+#endif
+
+ printf (" Image Name: %.*s\n", IH_NMLEN, hdr->ih_name);
+#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_TIMESTAMP)
+ to_tm (timestamp, &tm);
+ printf (" Created: %4d-%02d-%02d %2d:%02d:%02d UTC\n",
+ tm.tm_year, tm.tm_mon, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+#endif /* CFG_CMD_DATE, CONFIG_TIMESTAMP */
+ printf (" Image Type: "); print_type(hdr); printf ("\n");
+ printf (" Data Size: %d Bytes = ", ntohl(hdr->ih_size));
+ print_size (ntohl(hdr->ih_size), "\n");
+ printf (" Load Address: %08x\n", ntohl(hdr->ih_load));
+ printf (" Entry Point: %08x\n", ntohl(hdr->ih_ep));
+
+ if (hdr->ih_type == IH_TYPE_MULTI) {
+ int i;
+ ulong len;
+ ulong *len_ptr = (ulong *)((ulong)hdr + sizeof(image_header_t));
+
+ printf (" Contents:\n");
+ for (i=0; (len = ntohl(*len_ptr)); ++i, ++len_ptr) {
+ printf (" Image %d: %8ld Bytes = ", i, len);
+ print_size (len, "\n");
+ }
+ }
+}
+
+
+static void
+print_type (image_header_t *hdr)
+{
+ char *os, *arch, *type, *comp;
+
+ switch (hdr->ih_os) {
+ case IH_OS_INVALID: os = "Invalid OS"; break;
+ case IH_OS_NETBSD: os = "NetBSD"; break;
+ case IH_OS_LINUX: os = "Linux"; break;
+ case IH_OS_VXWORKS: os = "VxWorks"; break;
+ case IH_OS_QNX: os = "QNX"; break;
+ case IH_OS_U_BOOT: os = "U-Boot"; break;
+ default: os = "Unknown OS"; break;
+ }
+
+ switch (hdr->ih_arch) {
+ case IH_CPU_INVALID: arch = "Invalid CPU"; break;
+ case IH_CPU_ALPHA: arch = "Alpha"; break;
+ case IH_CPU_ARM: arch = "ARM"; break;
+ case IH_CPU_I386: arch = "Intel x86"; break;
+ case IH_CPU_IA64: arch = "IA64"; break;
+ case IH_CPU_MIPS: arch = "MIPS"; break;
+ case IH_CPU_MIPS64: arch = "MIPS 64 Bit"; break;
+ case IH_CPU_PPC: arch = "PowerPC"; break;
+ case IH_CPU_S390: arch = "IBM S390"; break;
+ case IH_CPU_SH: arch = "SuperH"; break;
+ case IH_CPU_SPARC: arch = "SPARC"; break;
+ case IH_CPU_SPARC64: arch = "SPARC 64 Bit"; break;
+ default: arch = "Unknown Architecture"; break;
+ }
+
+ switch (hdr->ih_type) {
+ case IH_TYPE_INVALID: type = "Invalid Image"; break;
+ case IH_TYPE_STANDALONE:type = "Standalone Program"; break;
+ case IH_TYPE_KERNEL: type = "Kernel Image"; break;
+ case IH_TYPE_RAMDISK: type = "RAMDisk Image"; break;
+ case IH_TYPE_MULTI: type = "Multi-File Image"; break;
+ case IH_TYPE_FIRMWARE: type = "Firmware"; break;
+ case IH_TYPE_SCRIPT: type = "Script"; break;
+ default: type = "Unknown Image"; break;
+ }
+
+ switch (hdr->ih_comp) {
+ case IH_COMP_NONE: comp = "uncompressed"; break;
+ case IH_COMP_GZIP: comp = "gzip compressed"; break;
+ case IH_COMP_BZIP2: comp = "bzip2 compressed"; break;
+ default: comp = "unknown compression"; break;
+ }
+
+ printf ("%s %s %s (%s)", arch, os, type, comp);
+}
+
+#define ZALLOC_ALIGNMENT 16
+
+static void *zalloc(void *x, unsigned items, unsigned size)
+{
+ void *p;
+
+ size *= items;
+ size = (size + ZALLOC_ALIGNMENT - 1) & ~(ZALLOC_ALIGNMENT - 1);
+
+ p = malloc (size);
+
+ return (p);
+}
+
+static void zfree(void *x, void *addr, unsigned nb)
+{
+ free (addr);
+}
+
+#define HEAD_CRC 2
+#define EXTRA_FIELD 4
+#define ORIG_NAME 8
+#define COMMENT 0x10
+#define RESERVED 0xe0
+
+#define DEFLATED 8
+
+int gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
+{
+ z_stream s;
+ int r, i, flags;
+
+ /* skip header */
+ i = 10;
+ flags = src[3];
+ if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
+ printf ("Error: Bad gzipped data\n");
+ return (-1);
+ }
+ if ((flags & EXTRA_FIELD) != 0)
+ i = 12 + src[10] + (src[11] << 8);
+ if ((flags & ORIG_NAME) != 0)
+ while (src[i++] != 0)
+ ;
+ if ((flags & COMMENT) != 0)
+ while (src[i++] != 0)
+ ;
+ if ((flags & HEAD_CRC) != 0)
+ i += 2;
+ if (i >= *lenp) {
+ printf ("Error: gunzip out of data in header\n");
+ return (-1);
+ }
+
+ s.zalloc = zalloc;
+ s.zfree = zfree;
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+ s.outcb = (cb_func)WATCHDOG_RESET;
+#else
+ s.outcb = Z_NULL;
+#endif /* CONFIG_HW_WATCHDOG */
+
+ r = inflateInit2(&s, -MAX_WBITS);
+ if (r != Z_OK) {
+ printf ("Error: inflateInit2() returned %d\n", r);
+ return (-1);
+ }
+ s.next_in = src + i;
+ s.avail_in = *lenp - i;
+ s.next_out = dst;
+ s.avail_out = dstlen;
+ r = inflate(&s, Z_FINISH);
+ if (r != Z_OK && r != Z_STREAM_END) {
+ printf ("Error: inflate() returned %d\n", r);
+ return (-1);
+ }
+ *lenp = s.next_out - (unsigned char *) dst;
+ inflateEnd(&s);
+
+ return (0);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_ELF)
+static void
+do_bootm_vxworks (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+ ulong addr, ulong *len_ptr, int verify)
+{
+ image_header_t *hdr = &header;
+ char str[80];
+
+ sprintf(str, "%x", hdr->ih_ep); /* write entry-point into string */
+ setenv("loadaddr", str);
+ do_bootvx(cmdtp, 0, 0, NULL);
+}
+
+static void
+do_bootm_qnxelf (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+ ulong addr, ulong *len_ptr, int verify)
+{
+ image_header_t *hdr = &header;
+ char *local_args[2];
+ char str[16];
+
+ sprintf(str, "%x", hdr->ih_ep); /* write entry-point into string */
+ local_args[0] = argv[0];
+ local_args[1] = str; /* and provide it via the arguments */
+ do_bootelf(cmdtp, 0, 2, local_args);
+}
+#endif /* CFG_CMD_ELF */
diff --git a/common/console.c b/common/console.c
new file mode 100644
index 0000000..f99dfcc
--- /dev/null
+++ b/common/console.c
@@ -0,0 +1,532 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <stdarg.h>
+#include <malloc.h>
+#include <console.h>
+#include <syscall.h>
+
+void **syscall_tbl;
+
+#ifdef CFG_CONSOLE_IS_IN_ENV
+/*
+ * if overwrite_console returns 1, the stdin, stderr and stdout
+ * are switched to the serial port, else the settings in the
+ * environment are used
+ */
+#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+extern int overwrite_console (void);
+#else
+int overwrite_console (void)
+{
+ return (0);
+}
+#endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */
+
+#endif /* CFG_CONSOLE_IS_IN_ENV */
+
+static int console_setfile (int file, device_t * dev)
+{
+ int error = 0;
+
+ if (dev == NULL)
+ return -1;
+
+ switch (file) {
+ case stdin:
+ case stdout:
+ case stderr:
+ /* Start new device */
+ if (dev->start) {
+ error = dev->start ();
+ /* If it's not started dont use it */
+ if (error < 0)
+ break;
+ }
+
+ /* Assign the new device (leaving the existing one started) */
+ stdio_devices[file] = dev;
+
+ /*
+ * Update monitor functions
+ * (to use the console stuff by other applications)
+ */
+ switch (file) {
+ case stdin:
+ syscall_tbl[SYSCALL_GETC] = dev->getc;
+ syscall_tbl[SYSCALL_TSTC] = dev->tstc;
+ break;
+ case stdout:
+ syscall_tbl[SYSCALL_PUTC] = dev->putc;
+ syscall_tbl[SYSCALL_PUTS] = dev->puts;
+ syscall_tbl[SYSCALL_PRINTF] = printf;
+ break;
+ }
+ break;
+
+ default: /* Invalid file ID */
+ error = -1;
+ }
+ return error;
+}
+
+/** U-Boot INITIAL CONSOLE-NOT COMPATIBLE FUNCTIONS *************************/
+
+void serial_printf (const char *fmt, ...)
+{
+ va_list args;
+ uint i;
+ char printbuffer[CFG_PBSIZE];
+
+ va_start (args, fmt);
+
+ /* For this to work, printbuffer must be larger than
+ * anything we ever want to print.
+ */
+ i = vsprintf (printbuffer, fmt, args);
+ va_end (args);
+
+ serial_puts (printbuffer);
+}
+
+int fgetc (int file)
+{
+ if (file < MAX_FILES)
+ return stdio_devices[file]->getc ();
+
+ return -1;
+}
+
+int ftstc (int file)
+{
+ if (file < MAX_FILES)
+ return stdio_devices[file]->tstc ();
+
+ return -1;
+}
+
+void fputc (int file, const char c)
+{
+ if (file < MAX_FILES)
+ stdio_devices[file]->putc (c);
+}
+
+void fputs (int file, const char *s)
+{
+ if (file < MAX_FILES)
+ stdio_devices[file]->puts (s);
+}
+
+void fprintf (int file, const char *fmt, ...)
+{
+ va_list args;
+ uint i;
+ char printbuffer[CFG_PBSIZE];
+
+ va_start (args, fmt);
+
+ /* For this to work, printbuffer must be larger than
+ * anything we ever want to print.
+ */
+ i = vsprintf (printbuffer, fmt, args);
+ va_end (args);
+
+ /* Send to desired file */
+ fputs (file, printbuffer);
+}
+
+/** U-Boot INITIAL CONSOLE-COMPATIBLE FUNCTION *****************************/
+
+int getc (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (gd->flags & GD_FLG_DEVINIT) {
+ /* Get from the standard input */
+ return fgetc (stdin);
+ }
+
+ /* Send directly to the handler */
+ return serial_getc ();
+}
+
+int tstc (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (gd->flags & GD_FLG_DEVINIT) {
+ /* Test the standard input */
+ return ftstc (stdin);
+ }
+
+ /* Send directly to the handler */
+ return serial_tstc ();
+}
+
+void putc (const char c)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (gd->flags & GD_FLG_DEVINIT) {
+ /* Send to the standard output */
+ fputc (stdout, c);
+ } else {
+ /* Send directly to the handler */
+ serial_putc (c);
+ }
+}
+
+void puts (const char *s)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (gd->flags & GD_FLG_DEVINIT) {
+ /* Send to the standard output */
+ fputs (stdout, s);
+ } else {
+ /* Send directly to the handler */
+ serial_puts (s);
+ }
+}
+
+void printf (const char *fmt, ...)
+{
+ va_list args;
+ uint i;
+ char printbuffer[CFG_PBSIZE];
+
+ va_start (args, fmt);
+
+ /* For this to work, printbuffer must be larger than
+ * anything we ever want to print.
+ */
+ i = vsprintf (printbuffer, fmt, args);
+ va_end (args);
+
+ /* Print the string */
+ puts (printbuffer);
+}
+
+/* test if ctrl-c was pressed */
+static int ctrlc_disabled = 0; /* see disable_ctrl() */
+static int ctrlc_was_pressed = 0;
+int ctrlc (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (!ctrlc_disabled && gd->have_console) {
+ if (tstc ()) {
+ switch (getc ()) {
+ case 0x03: /* ^C - Control C */
+ ctrlc_was_pressed = 1;
+ return 1;
+ default:
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+/* pass 1 to disable ctrlc() checking, 0 to enable.
+ * returns previous state
+ */
+int disable_ctrlc (int disable)
+{
+ int prev = ctrlc_disabled; /* save previous state */
+
+ ctrlc_disabled = disable;
+ return prev;
+}
+
+int had_ctrlc (void)
+{
+ return ctrlc_was_pressed;
+}
+
+void clear_ctrlc (void)
+{
+ ctrlc_was_pressed = 0;
+}
+
+#ifdef CONFIG_MODEM_SUPPORT_DEBUG
+char screen[1024];
+char *cursor = screen;
+int once = 0;
+inline void dbg(const char *fmt, ...)
+{
+ va_list args;
+ uint i;
+ char printbuffer[CFG_PBSIZE];
+
+ if (!once) {
+ memset(screen, 0, sizeof(screen));
+ once++;
+ }
+
+ va_start(args, fmt);
+
+ /* For this to work, printbuffer must be larger than
+ * anything we ever want to print.
+ */
+ i = vsprintf(printbuffer, fmt, args);
+ va_end(args);
+
+ if ((screen + sizeof(screen) - 1 - cursor) < strlen(printbuffer)+1) {
+ memset(screen, 0, sizeof(screen));
+ cursor = screen;
+ }
+ sprintf(cursor, printbuffer);
+ cursor += strlen(printbuffer);
+
+}
+#else
+inline void dbg(const char *fmt, ...)
+{
+}
+#endif
+
+/** U-Boot INIT FUNCTIONS *************************************************/
+
+int console_assign (int file, char *devname)
+{
+ int flag, i;
+
+ /* Check for valid file */
+ switch (file) {
+ case stdin:
+ flag = DEV_FLAGS_INPUT;
+ break;
+ case stdout:
+ case stderr:
+ flag = DEV_FLAGS_OUTPUT;
+ break;
+ default:
+ return -1;
+ }
+
+ /* Check for valid device name */
+
+ for (i = 1; i <= ListNumItems (devlist); i++) {
+ device_t *dev = ListGetPtrToItem (devlist, i);
+
+ if (strcmp (devname, dev->name) == 0) {
+ if (dev->flags & flag)
+ return console_setfile (file, dev);
+
+ return -1;
+ }
+ }
+
+ return -1;
+}
+
+/* Called before relocation - use serial functions */
+int console_init_f (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->have_console = 1;
+ return (0);
+}
+
+#ifdef CFG_CONSOLE_IS_IN_ENV
+/* search a device */
+device_t *search_device (int flags, char *name)
+{
+ int i, items;
+ device_t *dev = NULL;
+
+ items = ListNumItems (devlist);
+ if (name == NULL)
+ return dev;
+
+ for (i = 1; i <= items; i++) {
+ dev = ListGetPtrToItem (devlist, i);
+ if ((dev->flags & flags) && (strcmp (name, dev->name) == 0)) {
+ break;
+ }
+ }
+ return dev;
+}
+#endif /* CFG_CONSOLE_IS_IN_ENV */
+
+#ifdef CFG_CONSOLE_IS_IN_ENV
+/* Called after the relocation - use desired console functions */
+int console_init_r (void)
+{
+ char *stdinname, *stdoutname, *stderrname;
+ device_t *inputdev = NULL, *outputdev = NULL, *errdev = NULL;
+
+ /* set default handlers at first */
+ syscall_tbl[SYSCALL_GETC] = serial_getc;
+ syscall_tbl[SYSCALL_TSTC] = serial_tstc;
+ syscall_tbl[SYSCALL_PUTC] = serial_putc;
+ syscall_tbl[SYSCALL_PUTS] = serial_puts;
+ syscall_tbl[SYSCALL_PRINTF] = serial_printf;
+
+ /* stdin stdout and stderr are in environment */
+ /* scan for it */
+ stdinname = getenv ("stdin");
+ stdoutname = getenv ("stdout");
+ stderrname = getenv ("stderr");
+
+ if (overwrite_console () == 0) { /* if not overwritten by config switch */
+ inputdev = search_device (DEV_FLAGS_INPUT, stdinname);
+ outputdev = search_device (DEV_FLAGS_OUTPUT, stdoutname);
+ errdev = search_device (DEV_FLAGS_OUTPUT, stderrname);
+ }
+ /* if the devices are overwritten or not found, use default device */
+ if (inputdev == NULL) {
+ inputdev = search_device (DEV_FLAGS_INPUT, "serial");
+ }
+ if (outputdev == NULL) {
+ outputdev = search_device (DEV_FLAGS_OUTPUT, "serial");
+ }
+ if (errdev == NULL) {
+ errdev = search_device (DEV_FLAGS_OUTPUT, "serial");
+ }
+ /* Initializes output console first */
+ if (outputdev != NULL) {
+ console_setfile (stdout, outputdev);
+ }
+ if (errdev != NULL) {
+ console_setfile (stderr, errdev);
+ }
+ if (inputdev != NULL) {
+ console_setfile (stdin, inputdev);
+ }
+
+#ifndef CFG_CONSOLE_INFO_QUIET
+ /* Print information */
+ printf ("In: ");
+ if (stdio_devices[stdin] == NULL) {
+ printf ("No input devices available!\n");
+ } else {
+ printf ("%s\n", stdio_devices[stdin]->name);
+ }
+
+ printf ("Out: ");
+ if (stdio_devices[stdout] == NULL) {
+ printf ("No output devices available!\n");
+ } else {
+ printf ("%s\n", stdio_devices[stdout]->name);
+ }
+
+ printf ("Err: ");
+ if (stdio_devices[stderr] == NULL) {
+ printf ("No error devices available!\n");
+ } else {
+ printf ("%s\n", stdio_devices[stderr]->name);
+ }
+#endif /* CFG_CONSOLE_INFO_QUIET */
+
+#ifdef CFG_CONSOLE_ENV_OVERWRITE
+ /* set the environment variables (will overwrite previous env settings) */
+ for (i = 0; i < 3; i++) {
+ setenv (stdio_names[i], stdio_devices[i]->name);
+ }
+#endif /* CFG_CONSOLE_ENV_OVERWRITE */
+
+#if 0
+ /* If nothing usable installed, use only the initial console */
+ if ((stdio_devices[stdin] == NULL) && (stdio_devices[stdout] == NULL))
+ return (0);
+#endif
+ return (0);
+}
+
+#else /* CFG_CONSOLE_IS_IN_ENV */
+
+/* Called after the relocation - use desired console functions */
+int console_init_r (void)
+{
+ device_t *inputdev = NULL, *outputdev = NULL;
+ int i, items = ListNumItems (devlist);
+
+ /* Scan devices looking for input and output devices */
+ for (i = 1;
+ (i <= items) && ((inputdev == NULL) || (outputdev == NULL));
+ i++
+ ) {
+ device_t *dev = ListGetPtrToItem (devlist, i);
+
+ if ((dev->flags & DEV_FLAGS_INPUT) && (inputdev == NULL)) {
+ inputdev = dev;
+ }
+ if ((dev->flags & DEV_FLAGS_OUTPUT) && (outputdev == NULL)) {
+ outputdev = dev;
+ }
+ }
+
+ /* Initializes output console first */
+ if (outputdev != NULL) {
+ console_setfile (stdout, outputdev);
+ console_setfile (stderr, outputdev);
+ }
+
+ /* Initializes input console */
+ if (inputdev != NULL) {
+ console_setfile (stdin, inputdev);
+ }
+
+#ifndef CFG_CONSOLE_INFO_QUIET
+ /* Print informations */
+ printf ("In: ");
+ if (stdio_devices[stdin] == NULL) {
+ printf ("No input devices available!\n");
+ } else {
+ printf ("%s\n", stdio_devices[stdin]->name);
+ }
+
+ printf ("Out: ");
+ if (stdio_devices[stdout] == NULL) {
+ printf ("No output devices available!\n");
+ } else {
+ printf ("%s\n", stdio_devices[stdout]->name);
+ }
+
+ printf ("Err: ");
+ if (stdio_devices[stderr] == NULL) {
+ printf ("No error devices available!\n");
+ } else {
+ printf ("%s\n", stdio_devices[stderr]->name);
+ }
+#endif /* CFG_CONSOLE_INFO_QUIET */
+
+ /* Setting environment variables */
+ for (i = 0; i < 3; i++) {
+ setenv (stdio_names[i], stdio_devices[i]->name);
+ }
+
+#if 0
+ /* If nothing usable installed, use only the initial console */
+ if ((stdio_devices[stdin] == NULL) && (stdio_devices[stdout] == NULL))
+ return (0);
+#endif
+
+ return (0);
+}
+
+#endif /* CFG_CONSOLE_IS_IN_ENV */
generated by cgit v1.1 at 2024-11-22 18:14:28 +0000