diff options
Diffstat (limited to 'common')
| -rw-r--r-- | common/Makefile | 2 | ||||
| -rw-r--r-- | common/cmd_bootm.c | 37 | ||||
| -rw-r--r-- | common/cmd_log.c | 223 | ||||
| -rw-r--r-- | common/cmd_pcmcia.c | 218 | ||||
| -rw-r--r-- | common/command.c | 2 | ||||
| -rw-r--r-- | common/devices.c | 3 |
6 files changed, 469 insertions, 16 deletions
diff --git a/common/Makefile b/common/Makefile index f2c90c7..3f4ff01 100644 --- a/common/Makefile +++ b/common/Makefile @@ -33,7 +33,7 @@ COBJS = main.o altera.o bedbug.o \ cmd_dcr.o cmd_diag.o cmd_doc.o cmd_dtt.o \ cmd_eeprom.o cmd_elf.o cmd_fdc.o cmd_flash.o \ cmd_fpga.o cmd_i2c.o cmd_ide.o cmd_immap.o \ - cmd_jffs2.o cmd_mem.o cmd_mii.o cmd_misc.o \ + cmd_jffs2.o cmd_log.o cmd_mem.o cmd_mii.o cmd_misc.o \ cmd_net.o cmd_nvedit.o env_common.o \ env_flash.o env_eeprom.o env_nvram.o env_nowhere.o \ cmd_pci.o cmd_pcmcia.o \ diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index e8ce40d..70ca999 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -325,6 +325,17 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, initrd_high = ~0; } +#ifdef CONFIG_LOGBUFFER + kbd=gd->bd; + if ((s = getenv ("logstart")) != NULL) { + kbd->bi_sramstart = simple_strtoul(s, NULL, 16); + /* Prevent initrd from overwriting logbuffer */ + if (initrd_high < kbd->bi_sramstart) + initrd_high = kbd->bi_sramstart-1024; + } + debug ("## Logbuffer at 0x%08lX ", kbd->bi_sramstart); +#endif + /* * Booting a (Linux) kernel image * @@ -337,17 +348,15 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, asm( "mr %0,1": "=r"(sp) : ); -#ifdef DEBUG - printf ("## Current stack ends at 0x%08lX ", sp); -#endif + debug ("## Current stack ends at 0x%08lX ", sp); + sp -= 2048; /* just to be sure */ if (sp > CFG_BOOTMAPSZ) sp = CFG_BOOTMAPSZ; sp &= ~0xF; -#ifdef DEBUG - printf ("=> set upper limit to 0x%08lX\n", sp); -#endif + debug ("=> set upper limit to 0x%08lX\n", sp); + cmdline = (char *)((sp - CFG_BARGSIZE) & ~0xF); kbd = (bd_t *)(((ulong)cmdline - sizeof(bd_t)) & ~0xF); @@ -492,11 +501,9 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, len = data = 0; } -#ifdef DEBUG if (!data) { - printf ("No initrd\n"); + debug ("No initrd\n"); } -#endif if (data) { initrd_start = (ulong)kbd - len; @@ -527,10 +534,10 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, } SHOW_BOOT_PROGRESS (12); -#ifdef DEBUG - printf ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n", + + debug ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n", data, data + len - 1, len, len); -#endif + initrd_end = initrd_start + len; printf (" Loading Ramdisk to %08lx, end %08lx ... ", initrd_start, initrd_end); @@ -558,10 +565,10 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, initrd_end = 0; } -#ifdef DEBUG - printf ("## Transferring control to Linux (at address %08lx) ...\n", + + debug ("## Transferring control to Linux (at address %08lx) ...\n", (ulong)kernel); -#endif + SHOW_BOOT_PROGRESS (15); #ifdef CFG_INIT_RAM_LOCK diff --git a/common/cmd_log.c b/common/cmd_log.c new file mode 100644 index 0000000..2e42f10 --- /dev/null +++ b/common/cmd_log.c @@ -0,0 +1,223 @@ +/* + * (C) Copyright 2002 + * Detlev Zundel, DENX Software Engineering, dzu@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Logbuffer handling routines + */ + +#include <common.h> +#include <command.h> +#include <devices.h> +#include <logbuff.h> + +#if defined(CONFIG_LOGBUFFER) + +#define LOG_BUF_LEN (16384) +#define LOG_BUF_MASK (LOG_BUF_LEN-1) + +/* Local prototypes */ +static void logbuff_putc (const char c); +static void logbuff_puts (const char *s); +static int logbuff_printk(const char *line); + +static char buf[1024]; + +static unsigned console_loglevel = 3; +static unsigned default_message_loglevel = 4; +static unsigned long log_size; +static unsigned char *log_buf=NULL; +static unsigned long *ext_log_start, *ext_logged_chars; +#define log_start (*ext_log_start) +#define logged_chars (*ext_logged_chars) + +/* Forced by code, eh! */ +#define LOGBUFF_MAGIC 0xc0de4ced + +int drv_logbuff_init (void) +{ + device_t logdev; + int rc; + + /* Device initialization */ + memset (&logdev, 0, sizeof (logdev)); + + strcpy (logdev.name, "logbuff"); + logdev.ext = 0; /* No extensions */ + logdev.flags = DEV_FLAGS_OUTPUT; /* Output only */ + logdev.putc = logbuff_putc; /* 'putc' function */ + logdev.puts = logbuff_puts; /* 'puts' function */ + + rc = device_register (&logdev); + + return (rc == 0) ? 1 : rc; +} + +static void logbuff_putc (const char c) +{ + char buf[2]; + buf[0]=c; + buf[1]='\0'; + logbuff_printk(buf); +} + +static void logbuff_puts (const char *s) +{ + char buf[512]; + + sprintf(buf, "%s\n", s); + logbuff_printk(buf); +} + +void logbuff_log(char *msg) +{ + DECLARE_GLOBAL_DATA_PTR; + + if (gd->flags & GD_FLG_RELOC) { + logbuff_printk(msg); + } else { + puts(msg); + } +} + +void logbuff_reset (void) +{ + char *s; + unsigned long *ext_tag; + + if ((s = getenv ("logstart")) != NULL) { + log_buf = (unsigned char *)simple_strtoul(s, NULL, 16); + ext_tag=(unsigned long *)(log_buf)-3; + ext_log_start=(unsigned long *)(log_buf)-2; + ext_logged_chars=(unsigned long *)(log_buf)-1; +// if (*ext_tag!=LOGBUFF_MAGIC) { + logged_chars=log_start=0; + *ext_tag=LOGBUFF_MAGIC; +// } + log_size=logged_chars; + } +} + +/* + * Subroutine: do_log + * + * Description: Handler for 'log' command.. + * + * Inputs: argv[1] contains the subcommand + * + * Return: None + * + */ +int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char *s; + unsigned long i; + + if (log_buf==NULL) { + printf ("No logbuffer defined! Set 'logstart' to use this feature.\n"); + return 1; + } + + switch (argc) { + + case 2: + if (strcmp(argv[1],"show") == 0) { + for (i=0; i<logged_chars; i++) { + s=log_buf+((log_start+i)&LOG_BUF_MASK); + putc(*s); + } + return 0; + } else if (strcmp(argv[1],"reset") == 0) { + log_start=0; + logged_chars=0; + log_size=0; + return 0; + } + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + + case 3: + if (strcmp(argv[1],"append") == 0) { + logbuff_puts(argv[2]); + return 0; + + } + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + + default: + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } +} + +static int logbuff_printk(const char *line) +{ + int i; + char *msg, *p, *buf_end; + int line_feed; + static signed char msg_level = -1; + + strcpy(buf + 3, line); + i = strlen(line); + buf_end = buf + 3 + i; + for (p = buf + 3; p < buf_end; p++) { + msg = p; + if (msg_level < 0) { + if ( + p[0] != '<' || + p[1] < '0' || + p[1] > '7' || + p[2] != '>' + ) { + p -= 3; + p[0] = '<'; + p[1] = default_message_loglevel + '0'; + p[2] = '>'; + } else + msg += 3; + msg_level = p[1] - '0'; + } + line_feed = 0; + for (; p < buf_end; p++) { + log_buf[(log_start+log_size) & LOG_BUF_MASK] = *p; + if (log_size < LOG_BUF_LEN) + log_size++; + else + log_start++; + + logged_chars++; + if (*p == '\n') { + line_feed = 1; + break; + } + } + if (msg_level < console_loglevel) { + printf("%s", msg); + } + if (line_feed) + msg_level = -1; + } + return i; +} + +#endif /* (CONFIG_LOGBUFFER) */ diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c index ccf21a9..6d01e70 100644 --- a/common/cmd_pcmcia.c +++ b/common/cmd_pcmcia.c @@ -1975,6 +1975,224 @@ done: #endif /* R360MPI */ +/* ---------------------------------------------------------------------------- */ +/* KUP4K Board */ +/* ---------------------------------------------------------------------------- */ +#if defined(CONFIG_KUP4K) + +#define PCMCIA_BOARD_MSG "KUP4K" + +#define KUP4K_PCMCIA_B_3V3 (0x00020000) + +static int hardware_enable(int slot) +{ + volatile immap_t *immap; + volatile cpm8xx_t *cp; + volatile pcmconf8xx_t *pcmp; + volatile sysconf8xx_t *sysp; + uint reg, mask; + + debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); + + udelay(10000); + + immap = (immap_t *)CFG_IMMR; + sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf)); + pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia)); + cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm)); + + /* + * Configure SIUMCR to enable PCMCIA port B + * (VFLS[0:1] are not used for debugging, we connect FRZ# instead) + */ + sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */ + + /* clear interrupt state, and disable interrupts */ + pcmp->pcmc_pscr = PCMCIA_MASK(_slot_); + pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_); + + /* disable interrupts & DMA */ + PCMCIA_PGCRX(_slot_) = 0; + + /* + * Disable PCMCIA buffers (isolate the interface) + * and assert RESET signal + */ + debug ("Disable PCMCIA buffers and assert RESET\n"); + reg = PCMCIA_PGCRX(_slot_); + reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ + reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ + PCMCIA_PGCRX(_slot_) = reg; + udelay(500); + + /* + * Configure Port B pins for + * 3 Volts enable + */ + cp->cp_pbdir |= KUP4K_PCMCIA_B_3V3; + cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3; + /* remove all power */ + cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3; /* active low */ + + /* + * Make sure there is a card in the slot, then configure the interface. + */ + udelay(10000); + debug ("[%d] %s: PIPR(%p)=0x%x\n", + __LINE__,__FUNCTION__, + &(pcmp->pcmc_pipr),pcmp->pcmc_pipr); + if (pcmp->pcmc_pipr & 0x00001800) { + printf (" No Card found\n"); + return (1); + } + + /* + * Power On. + */ + mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot); + reg = pcmp->pcmc_pipr; + debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", + reg, + (reg&PCMCIA_VS1(slot))?"n":"ff", + (reg&PCMCIA_VS2(slot))?"n":"ff"); + if ((reg & mask) == mask) { + puts (" 5.0V card found: NOT SUPPORTED !!!\n"); + } else { + cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3; + puts (" 3.3V card found: "); + } +#if 0 + /* VCC switch error flag, PCMCIA slot INPACK_ pin */ + cp->cp_pbdir &= ~(0x0020 | 0x0010); + cp->cp_pbpar &= ~(0x0020 | 0x0010); + udelay(500000); +#endif + debug ("Enable PCMCIA buffers and stop RESET\n"); + reg = PCMCIA_PGCRX(_slot_); + reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ + reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ + PCMCIA_PGCRX(_slot_) = reg; + + udelay(250000); /* some cards need >150 ms to come up :-( */ + + debug ("# hardware_enable done\n"); + + return (0); +} + + + +#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) +static int hardware_disable(int slot) +{ + volatile immap_t *immap; + volatile cpm8xx_t *cp; + volatile pcmconf8xx_t *pcmp; + u_long reg; + + debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); + + immap = (immap_t *)CFG_IMMR; + pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia)); + cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm)); + + /* remove all power */ + cp->cp_pbdat |= DDC4000_PCMCIA_B_3V3; + + /* Configure PCMCIA General Control Register */ + PCMCIA_PGCRX(_slot_) = 0; + + debug ("Disable PCMCIA buffers and assert RESET\n"); + reg = PCMCIA_PGCRX(_slot_); + reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ + reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ + PCMCIA_PGCRX(_slot_) = reg; + + udelay(10000); + + return (0); +} +#endif /* CFG_CMD_PCMCIA */ + + + +static int voltage_set(int slot, int vcc, int vpp) +{ + volatile immap_t *immap; + volatile cpm8xx_t *cp; + volatile pcmconf8xx_t *pcmp; + u_long reg; + + debug ("voltage_set: " \ + PCMCIA_BOARD_MSG \ + " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n", + 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10); + + immap = (immap_t *)CFG_IMMR; + pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia)); + cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm)); + + /* + * Disable PCMCIA buffers (isolate the interface) + * and assert RESET signal + */ + debug ("Disable PCMCIA buffers and assert RESET\n"); + reg = PCMCIA_PGCRX(_slot_); + reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ + reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ + PCMCIA_PGCRX(_slot_) = reg; + udelay(500); + + debug ("PCMCIA power OFF\n"); + /* + * Configure Port B pins for + * 3 Volts enable + */ + cp->cp_pbdir |= KUP4K_PCMCIA_B_3V3; + cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3; + /* remove all power */ + cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3; /* active low */ + + switch(vcc) { + case 0: break; + case 33: + cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3; + debug ("PCMCIA powered at 3.3V\n"); + break; + case 50: + debug ("PCMCIA: 5Volt vcc not supported\n"); + break; + default: + puts("PCMCIA: vcc not supported"); + break; + } + + /* Checking supported voltages */ + + debug ("PIPR: 0x%x --> %s\n", + pcmp->pcmc_pipr, + (pcmp->pcmc_pipr & 0x00008000) + ? "only 5 V --> NOT SUPPORTED" + : "can do 3.3V"); + + + debug ("Enable PCMCIA buffers and stop RESET\n"); + reg = PCMCIA_PGCRX(_slot_); + reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ + reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ + PCMCIA_PGCRX(_slot_) = reg; + udelay(500); + + debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", + slot+'A'); + return (0); +} + +#endif /* KUP4K */ + + + + /* ---------------------------------------------------------------------------- */ /* End of Board Specific Stuff */ diff --git a/common/command.c b/common/command.c index 2f50e6d..db39b41 100644 --- a/common/command.c +++ b/common/command.c @@ -68,6 +68,7 @@ #include <cmd_dtt.h> #include <cmd_vfd.h> /* load a bitmap to the VFDs on TRAB */ +#include <cmd_log.h> /* * HELP command @@ -280,6 +281,7 @@ cmd_tbl_t cmd_tbl[] = { CMD_TBL_KGDB CMD_TBL_LOADB CMD_TBL_LOADS + CMD_TBL_LOG CMD_TBL_LOOP CMD_TBL_JFFS2_LS CMD_TBL_MCCINFO diff --git a/common/devices.c b/common/devices.c index 2d0b046..8207f83 100644 --- a/common/devices.c +++ b/common/devices.c @@ -178,6 +178,9 @@ int devices_init (void) #ifdef CONFIG_WL_4PPM_KEYBOARD drv_wlkbd_init (); #endif +#ifdef CONFIG_LOGBUFFER + drv_logbuff_init (); +#endif drv_system_init (); gd-> flags |= GD_FLG_DEVINIT; /* device initialization done */ |