diff options
Diffstat (limited to 'common')
| -rw-r--r-- | common/Makefile | 3 | ||||
| -rw-r--r-- | common/cmd_mdio.c | 286 |
2 files changed, 289 insertions, 0 deletions
diff --git a/common/Makefile b/common/Makefile index 02dbeed..5f0c534 100644 --- a/common/Makefile +++ b/common/Makefile @@ -117,6 +117,9 @@ COBJS-$(CONFIG_MII) += miiphyutil.o COBJS-$(CONFIG_CMD_MII) += miiphyutil.o COBJS-$(CONFIG_PHYLIB) += miiphyutil.o COBJS-$(CONFIG_CMD_MII) += cmd_mii.o +ifdef CONFIG_PHYLIB +COBJS-$(CONFIG_CMD_MII) += cmd_mdio.o +endif COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o COBJS-$(CONFIG_MP) += cmd_mp.o diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c new file mode 100644 index 0000000..cac0703 --- /dev/null +++ b/common/cmd_mdio.c @@ -0,0 +1,286 @@ +/* + * (C) Copyright 2011 Freescale Semiconductor, Inc + * Andy Fleming + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * MDIO Commands + */ + +#include <common.h> +#include <command.h> +#include <miiphy.h> +#include <phy.h> + + +static char last_op[2]; +static uint last_data; +static uint last_addr_lo; +static uint last_addr_hi; +static uint last_devad_lo; +static uint last_devad_hi; +static uint last_reg_lo; +static uint last_reg_hi; + +static int extract_range(char *input, int *plo, int *phi) +{ + char *end; + *plo = simple_strtol(input, &end, 0); + if (end == input) + return -1; + + if ((*end == '-') && *(++end)) + *phi = simple_strtol(end, NULL, 0); + else if (*end == '\0') + *phi = *plo; + else + return -1; + + return 0; +} + +int mdio_write_ranges(struct mii_dev *bus, int addrlo, + int addrhi, int devadlo, int devadhi, + int reglo, int reghi, unsigned short data) +{ + int addr, devad, reg; + int err = 0; + + for (addr = addrlo; addr <= addrhi; addr++) { + for (devad = devadlo; devad <= devadhi; devad++) { + for (reg = reglo; reg <= reghi; reg++) { + err = bus->write(bus, addr, devad, reg, data); + + if (err) + goto err_out; + } + } + } + +err_out: + return err; +} + +int mdio_read_ranges(struct mii_dev *bus, int addrlo, + int addrhi, int devadlo, int devadhi, + int reglo, int reghi) +{ + int addr, devad, reg; + + printf("Reading from bus %s\n", bus->name); + for (addr = addrlo; addr <= addrhi; addr++) { + printf("PHY at address %d:\n", addr); + + for (devad = devadlo; devad <= devadhi; devad++) { + for (reg = reglo; reg <= reghi; reg++) { + u16 val; + val = bus->read(bus, addr, devad, reg); + + if (val < 0) { + printf("Error\n"); + + return val; + } + + if (devad >= 0) + printf("%d.", devad); + + printf("%d - 0x%x\n", reg, val & 0xffff); + } + } + } + + return 0; +} + +/* The register will be in the form [a[-b].]x[-y] */ +int extract_reg_range(char *input, int *devadlo, int *devadhi, + int *reglo, int *reghi) +{ + char *regstr; + + /* use strrchr to find the last string after a '.' */ + regstr = strrchr(input, '.'); + + /* If it exists, extract the devad(s) */ + if (regstr) { + char devadstr[32]; + + strncpy(devadstr, input, regstr - input); + devadstr[regstr - input] = '\0'; + + if (extract_range(devadstr, devadlo, devadhi)) + return -1; + + regstr++; + } else { + /* Otherwise, we have no devad, and we just got regs */ + *devadlo = *devadhi = MDIO_DEVAD_NONE; + + regstr = input; + } + + return extract_range(regstr, reglo, reghi); +} + +int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus, + int *addrlo, int *addrhi) +{ + struct phy_device *phydev; + + if ((argc < 1) || (argc > 2)) + return -1; + + /* If there are two arguments, it's busname addr */ + if (argc == 2) { + *bus = miiphy_get_dev_by_name(argv[0]); + + if (!*bus) + return -1; + + return extract_range(argv[1], addrlo, addrhi); + } + + /* It must be one argument, here */ + + /* + * This argument can be one of two things: + * 1) Ethernet device name + * 2) Just an address (use the previously-used bus) + * + * We check all buses for a PHY which is connected to an ethernet + * device by the given name. If none are found, we call + * extract_range() on the string, and see if it's an address range. + */ + phydev = mdio_phydev_for_ethname(argv[0]); + + if (phydev) { + *addrlo = *addrhi = phydev->addr; + *bus = phydev->bus; + + return 0; + } + + /* It's an address or nothing useful */ + return extract_range(argv[0], addrlo, addrhi); +} + +/* ---------------------------------------------------------------- */ +static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char op[2]; + int addrlo, addrhi, reglo, reghi, devadlo, devadhi; + unsigned short data; + int pos = argc - 1; + struct mii_dev *bus; + + if (argc < 2) + return cmd_usage(cmdtp); + + /* + * We use the last specified parameters, unless new ones are + * entered. + */ + op[0] = argv[1][0]; + addrlo = last_addr_lo; + addrhi = last_addr_hi; + devadlo = last_devad_lo; + devadhi = last_devad_hi; + reglo = last_reg_lo; + reghi = last_reg_hi; + data = last_data; + + bus = mdio_get_current_dev(); + + if (flag & CMD_FLAG_REPEAT) + op[0] = last_op[0]; + + switch (op[0]) { + case 'w': + if (pos > 1) + data = simple_strtoul(argv[pos--], NULL, 16); + case 'r': + if (pos > 1) + if (extract_reg_range(argv[pos--], &devadlo, &devadhi, + ®lo, ®hi)) + return -1; + + default: + if (pos > 1) + if (extract_phy_range(&(argv[2]), pos - 1, &bus, + &addrlo, &addrhi)) + return -1; + + break; + } + + if (op[0] == 'l') { + mdio_list_devices(); + + return 0; + } + + /* Save the chosen bus */ + miiphy_set_current_dev(bus->name); + + switch (op[0]) { + case 'w': + mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi, + reglo, reghi, data); + break; + + case 'r': + mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi, + reglo, reghi); + break; + } + + /* + * Save the parameters for repeats. + */ + last_op[0] = op[0]; + last_addr_lo = addrlo; + last_addr_hi = addrhi; + last_devad_lo = devadlo; + last_devad_hi = devadhi; + last_reg_lo = reglo; + last_reg_hi = reghi; + last_data = data; + + return 0; +} + +/***************************************************/ + +U_BOOT_CMD( + mdio, 6, 1, do_mdio, + "MDIO utility commands", + "list - List MDIO buses\n" + "mdio read <phydev> [<devad>.]<reg> - " + "read PHY's register at <devad>.<reg>\n" + "mdio write <phydev> [<devad>.]<reg> <data> - " + "write PHY's register at <devad>.<reg>\n" + "<phydev> may be:\n" + " <busname> <addr>\n" + " <addr>\n" + " <eth name>\n" + "<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n" +); |