diff options
Diffstat (limited to 'common')
-rw-r--r-- | common/Kconfig | 3 | ||||
-rw-r--r-- | common/board_f.c | 32 | ||||
-rw-r--r-- | common/board_r.c | 14 | ||||
-rw-r--r-- | common/cmd_blob.c | 18 | ||||
-rw-r--r-- | common/cmd_bootm.c | 3 | ||||
-rw-r--r-- | common/cmd_eeprom.c | 6 | ||||
-rw-r--r-- | common/cmd_elf.c | 4 | ||||
-rw-r--r-- | common/cmd_fastboot.c | 6 | ||||
-rw-r--r-- | common/cmd_gpt.c | 52 | ||||
-rw-r--r-- | common/cmd_usb_mass_storage.c | 2 | ||||
-rw-r--r-- | common/cmd_yaffs2.c | 26 | ||||
-rw-r--r-- | common/dlmalloc.c | 10 | ||||
-rw-r--r-- | common/fb_mmc.c | 60 | ||||
-rw-r--r-- | common/hash.c | 10 | ||||
-rw-r--r-- | common/lcd_console.c | 39 | ||||
-rw-r--r-- | common/spl/spl.c | 35 |
16 files changed, 258 insertions, 62 deletions
diff --git a/common/Kconfig b/common/Kconfig index 2ca002d..e662774 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1,5 +1,4 @@ menu "Command line interface" - depends on !SPL_BUILD config HUSH_PARSER bool "Use hush shell" @@ -134,7 +133,7 @@ config LOOPW Infinite write loop on address range config CMD_MEMTEST - bool "crc32" + bool "memtest" help Simple RAM read/write test. diff --git a/common/board_f.c b/common/board_f.c index 62fdaeb..731b539 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -174,7 +174,7 @@ static int announce_dram_init(void) return 0; } -#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) +#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K) static int init_func_ram(void) { #ifdef CONFIG_BOARD_TYPES @@ -610,7 +610,7 @@ static int display_new_sp(void) return 0; } -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) static int setup_board_part1(void) { bd_t *bd = gd->bd; @@ -631,7 +631,7 @@ static int setup_board_part1(void) defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif -#if defined(CONFIG_MPC5xxx) +#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ #endif #if defined(CONFIG_MPC83xx) @@ -660,6 +660,14 @@ static int setup_board_part2(void) bd->bi_ipbfreq = gd->arch.ipb_clk; bd->bi_pcifreq = gd->pci_clk; #endif /* CONFIG_MPC5xxx */ +#if defined(CONFIG_M68K) && defined(CONFIG_PCI) + bd->bi_pcifreq = gd->pci_clk; +#endif +#if defined(CONFIG_EXTRA_CLOCK) + bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ + bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ + bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ +#endif return 0; } @@ -721,6 +729,13 @@ static int setup_reloc(void) { #ifdef CONFIG_SYS_TEXT_BASE gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE; +#ifdef CONFIG_M68K + /* + * On all ColdFire arch cpu, monitor code starts always + * just after the default vector table location, so at 0x400 + */ + gd->reloc_off = gd->relocaddr - (CONFIG_SYS_TEXT_BASE + 0x400); +#endif #endif memcpy(gd->new_gd, (char *)gd, sizeof(gd_t)); @@ -846,6 +861,9 @@ static init_fnc_t init_sequence_f[] = { #ifdef CONFIG_FSL_ESDHC get_clocks, #endif +#ifdef CONFIG_M68K + get_clocks, +#endif env_init, /* initialize environment */ #if defined(CONFIG_8xx_CPUCLK_DEFAULT) /* get CPU and bus clocks according to the environment variable */ @@ -872,7 +890,7 @@ static init_fnc_t init_sequence_f[] = { #if defined(CONFIG_MPC83xx) prt_83xx_rsr, #endif -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) checkcpu, #endif print_cpuinfo, /* display cpu info (and speed) */ @@ -898,7 +916,7 @@ static init_fnc_t init_sequence_f[] = { #if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) dram_init, /* configure available RAM banks */ #endif -#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) +#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K) init_func_ram, #endif #ifdef CONFIG_POST @@ -966,7 +984,7 @@ static init_fnc_t init_sequence_f[] = { reserve_stacks, setup_dram_config, show_dram_config, -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) setup_board_part1, INIT_FUNC_WATCHDOG_RESET setup_board_part2, @@ -1056,7 +1074,7 @@ void board_init_f_r(void) * Transfer execution from Flash to RAM by calculating the address * of the in-RAM copy of board_init_r() and calling it */ - (board_init_r + gd->reloc_off)(gd, gd->relocaddr); + (board_init_r + gd->reloc_off)((gd_t *)gd, gd->relocaddr); /* NOTREACHED - board_init_r() does not return */ hang(); diff --git a/common/board_r.c b/common/board_r.c index 4fcd4f6..0335f6b 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -167,14 +167,17 @@ static int initr_serial(void) return 0; } -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) static int initr_trap(void) { /* * Setup trap handlers */ +#if defined(CONFIG_PPC) trap_init(gd->relocaddr); - +#else + trap_init(CONFIG_SYS_SDRAM_BASE); +#endif return 0; } #endif @@ -729,7 +732,7 @@ init_fnc_t init_sequence_r[] = { #ifdef CONFIG_NEEDS_MANUAL_RELOC initr_manual_reloc_cmdtable, #endif -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) initr_trap, #endif #ifdef CONFIG_ADDR_MAP @@ -767,7 +770,7 @@ init_fnc_t init_sequence_r[] = { initr_flash, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_PPC) +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) /* initialize higher level parts of CPU like time base and timers */ cpu_init_r, #endif @@ -831,7 +834,8 @@ init_fnc_t init_sequence_r[] = { #if defined(CONFIG_ARM) || defined(CONFIG_AVR32) initr_enable_interrupts, #endif -#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) +#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) \ + || defined(CONFIG_M68K) timer_init, /* initialize timer */ #endif #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) diff --git a/common/cmd_blob.c b/common/cmd_blob.c index 82ecaf0..d3f22a1 100644 --- a/common/cmd_blob.c +++ b/common/cmd_blob.c @@ -90,17 +90,19 @@ static char blob_help_text[] = "enc src dst len km - Encapsulate and create blob of data\n" " $len bytes long at address $src and\n" " store the result at address $dst.\n" - " $km is the 16 byte key modifier\n" - " is also required for generation/use as\n" - " key for cryptographic operation. Key\n" - " modifier should be 16 byte long.\n" + " $km is the address where the key\n" + " modifier is stored.\n" + " The modifier is required for generation\n" + " /use as key for cryptographic operation.\n" + " Key modifier should be 16 byte long.\n" "blob dec src dst len km - Decapsulate the blob of data at address\n" " $src and store result of $len byte at\n" " addr $dst.\n" - " $km is the 16 byte key modifier\n" - " is also required for generation/use as\n" - " key for cryptographic operation. Key\n" - " modifier should be 16 byte long.\n"; + " $km is the address where the key\n" + " modifier is stored.\n" + " The modifier is required for generation\n" + " /use as key for cryptographic operation.\n" + " Key modifier should be 16 byte long.\n"; U_BOOT_CMD( blob, 6, 1, do_blob, diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 48199bf..4f77f22 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -78,7 +78,8 @@ static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc, return CMD_RET_USAGE; } - if (state != BOOTM_STATE_START && images.state >= state) { + if (((state & BOOTM_STATE_START) != BOOTM_STATE_START) && + images.state >= state) { printf("Trying to execute a command out of order\n"); return CMD_RET_USAGE; } diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index 29f0f1f..e9904cd 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -161,6 +161,9 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) spi_read (addr, alen, buffer, len); #else +#if defined(CONFIG_SYS_I2C_EEPROM_BUS) + i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); +#endif if (i2c_read(addr[0], offset, alen - 1, buffer, len)) rcode = 1; #endif @@ -339,6 +342,9 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn /* Write is enabled ... now write eeprom value. */ #endif +#if defined(CONFIG_SYS_I2C_EEPROM_BUS) + i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); +#endif if (i2c_write(addr[0], offset, alen - 1, buffer, len)) rcode = 1; diff --git a/common/cmd_elf.c b/common/cmd_elf.c index 58b61c2..c745371 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -95,6 +95,7 @@ int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned long addr; /* Address of the ELF image */ unsigned long rc; /* Return value from user code */ char *sload, *saddr; + const char *ep = getenv("autostart"); /* -------------------------------------------------- */ int rcode = 0; @@ -123,6 +124,9 @@ int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) else addr = load_elf_image_shdr(addr); + if (ep && !strcmp(ep, "no")) + return rcode; + printf("## Starting application at 0x%08lx ...\n", addr); /* diff --git a/common/cmd_fastboot.c b/common/cmd_fastboot.c index b72f4f3..346ab80 100644 --- a/common/cmd_fastboot.c +++ b/common/cmd_fastboot.c @@ -20,6 +20,12 @@ static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) if (ret) return ret; + if (!g_dnl_board_usb_cable_connected()) { + puts("\rUSB cable not detected.\n" \ + "Command exit.\n"); + return CMD_RET_FAILURE; + } + while (1) { if (g_dnl_detach()) break; diff --git a/common/cmd_gpt.c b/common/cmd_gpt.c index e38422d..c56fe15 100644 --- a/common/cmd_gpt.c +++ b/common/cmd_gpt.c @@ -154,17 +154,24 @@ static int set_gpt_info(block_dev_desc_t *dev_desc, /* extract disk guid */ s = str; - tok = strsep(&s, ";"); - val = extract_val(tok, "uuid_disk"); + val = extract_val(str, "uuid_disk"); if (!val) { +#ifdef CONFIG_RANDOM_UUID + *str_disk_guid = malloc(UUID_STR_LEN + 1); + gen_rand_uuid_str(*str_disk_guid, UUID_STR_FORMAT_STD); +#else free(str); return -2; +#endif + } else { + val = strsep(&val, ";"); + if (extract_env(val, &p)) + p = val; + *str_disk_guid = strdup(p); + free(val); + /* Move s to first partition */ + strsep(&s, ";"); } - if (extract_env(val, &p)) - p = val; - *str_disk_guid = strdup(p); - free(val); - if (strlen(s) == 0) return -3; @@ -192,20 +199,25 @@ static int set_gpt_info(block_dev_desc_t *dev_desc, /* uuid */ val = extract_val(tok, "uuid"); - if (!val) { /* 'uuid' is mandatory */ - errno = -4; - goto err; - } - if (extract_env(val, &p)) - p = val; - if (strlen(p) >= sizeof(parts[i].uuid)) { - printf("Wrong uuid format for partition %d\n", i); + if (!val) { + /* 'uuid' is optional if random uuid's are enabled */ +#ifdef CONFIG_RANDOM_UUID + gen_rand_uuid_str(parts[i].uuid, UUID_STR_FORMAT_STD); +#else errno = -4; goto err; +#endif + } else { + if (extract_env(val, &p)) + p = val; + if (strlen(p) >= sizeof(parts[i].uuid)) { + printf("Wrong uuid format for partition %d\n", i); + errno = -4; + goto err; + } + strcpy((char *)parts[i].uuid, p); + free(val); } - strcpy((char *)parts[i].uuid, p); - free(val); - /* name */ val = extract_val(tok, "name"); if (!val) { /* name is mandatory */ @@ -281,11 +293,11 @@ static int gpt_default(block_dev_desc_t *blk_dev_desc, const char *str_part) } /* save partitions layout to disk */ - gpt_restore(blk_dev_desc, str_disk_guid, partitions, part_count); + ret = gpt_restore(blk_dev_desc, str_disk_guid, partitions, part_count); free(str_disk_guid); free(partitions); - return 0; + return ret; } /** diff --git a/common/cmd_usb_mass_storage.c b/common/cmd_usb_mass_storage.c index 2c879ea..51c3fff 100644 --- a/common/cmd_usb_mass_storage.c +++ b/common/cmd_usb_mass_storage.c @@ -159,6 +159,6 @@ exit: U_BOOT_CMD(ums, 4, 1, do_usb_mass_storage, "Use the UMS [User Mass Storage]", - "ums <USB_controller> [<devtype>] <devnum> e.g. ums 0 mmc 0\n" + "<USB_controller> [<devtype>] <devnum> e.g. ums 0 mmc 0\n" " devtype defaults to mmc" ); diff --git a/common/cmd_yaffs2.c b/common/cmd_yaffs2.c index d43a9d4..9244606 100644 --- a/common/cmd_yaffs2.c +++ b/common/cmd_yaffs2.c @@ -281,46 +281,46 @@ int do_ymv(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) U_BOOT_CMD(ytrace, 2, 0, do_ytrace, "show/set yaffs trace mask", - "ytrace [new_mask] show/set yaffs trace mask"); + "[new_mask] show/set yaffs trace mask"); U_BOOT_CMD(ydevls, 1, 0, do_ydevls, "list yaffs mount points", "list yaffs mount points"); U_BOOT_CMD(ydevconfig, 5, 0, do_ydevconfig, "configure yaffs mount point", - "ydevconfig mtpoint mtd_id start_block end_block configures a yaffs2 mount point"); + "mtpoint mtd_id start_block end_block configures a yaffs2 mount point"); U_BOOT_CMD(ymount, 2, 0, do_ymount, - "mount yaffs", "ymount mtpoint mounts a yaffs2 mount point"); + "mount yaffs", "mtpoint mounts a yaffs2 mount point"); U_BOOT_CMD(yumount, 2, 0, do_yumount, - "unmount yaffs", "yunmount mtpoint unmounts a yaffs2 mount point"); + "unmount yaffs", "mtpoint unmounts a yaffs2 mount point"); -U_BOOT_CMD(yls, 3, 0, do_yls, "yaffs ls", "yls [-l] dirname"); +U_BOOT_CMD(yls, 3, 0, do_yls, "yaffs ls", "[-l] dirname"); U_BOOT_CMD(yrd, 2, 0, do_yrd, - "read file from yaffs", "yrd path read file from yaffs"); + "read file from yaffs", "path read file from yaffs"); U_BOOT_CMD(ywr, 4, 0, do_ywr, "write file to yaffs", - "ywr filename value num_vlues write values to yaffs file"); + "filename value num_vlues write values to yaffs file"); U_BOOT_CMD(yrdm, 3, 0, do_yrdm, "read file to memory from yaffs", - "yrdm filename offset reads yaffs file into memory"); + "filename offset reads yaffs file into memory"); U_BOOT_CMD(ywrm, 4, 0, do_ywrm, "write file from memory to yaffs", - "ywrm filename offset size writes memory to yaffs file"); + "filename offset size writes memory to yaffs file"); U_BOOT_CMD(ymkdir, 2, 0, do_ymkdir, - "YAFFS mkdir", "ymkdir dir create a yaffs directory"); + "YAFFS mkdir", "dir create a yaffs directory"); U_BOOT_CMD(yrmdir, 2, 0, do_yrmdir, - "YAFFS rmdir", "yrmdir dirname removes a yaffs directory"); + "YAFFS rmdir", "dirname removes a yaffs directory"); -U_BOOT_CMD(yrm, 2, 0, do_yrm, "YAFFS rm", "yrm path removes a yaffs file"); +U_BOOT_CMD(yrm, 2, 0, do_yrm, "YAFFS rm", "path removes a yaffs file"); U_BOOT_CMD(ymv, 4, 0, do_ymv, "YAFFS mv", - "ymv old_path new_path moves/rename files within a yaffs mount point"); + "old_path new_path moves/rename files within a yaffs mount point"); diff --git a/common/dlmalloc.c b/common/dlmalloc.c index 6453ee9..b2ce063 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1535,9 +1535,9 @@ void mem_malloc_init(ulong start, ulong size) debug("using memory %#lx-%#lx for malloc()\n", mem_malloc_start, mem_malloc_end); - - memset((void *)mem_malloc_start, 0, size); - +#ifdef CONFIG_SYS_MALLOC_CLEAR_ON_INIT + memset((void *)mem_malloc_start, 0x0, size); +#endif malloc_bin_reloc(); } @@ -2948,10 +2948,12 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; /* check if expand_top called, in which case don't need to clear */ +#ifdef CONFIG_SYS_MALLOC_CLEAR_ON_INIT #if MORECORE_CLEARS mchunkptr oldtop = top; INTERNAL_SIZE_T oldtopsize = chunksize(top); #endif +#endif Void_t* mem = mALLOc (sz); if ((long)n < 0) return NULL; @@ -2977,6 +2979,7 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; csz = chunksize(p); +#ifdef CONFIG_SYS_MALLOC_CLEAR_ON_INIT #if MORECORE_CLEARS if (p == oldtop && csz > oldtopsize) { @@ -2984,6 +2987,7 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; csz = oldtopsize; } #endif +#endif MALLOC_ZERO(mem, csz - SIZE_SZ); return mem; diff --git a/common/fb_mmc.c b/common/fb_mmc.c index 6ea3938..75899e4 100644 --- a/common/fb_mmc.c +++ b/common/fb_mmc.c @@ -10,6 +10,7 @@ #include <part.h> #include <aboot.h> #include <sparse_format.h> +#include <mmc.h> #ifndef CONFIG_FASTBOOT_GPT_NAME #define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME @@ -22,13 +23,13 @@ static char *response_str; void fastboot_fail(const char *s) { - strncpy(response_str, "FAIL", 4); + strncpy(response_str, "FAIL\0", 5); strncat(response_str, s, RESPONSE_LEN - 4 - 1); } void fastboot_okay(const char *s) { - strncpy(response_str, "OKAY", 4); + strncpy(response_str, "OKAY\0", 5); strncat(response_str, s, RESPONSE_LEN - 4 - 1); } @@ -110,3 +111,58 @@ void fb_mmc_flash_write(const char *cmd, void *download_buffer, write_raw_image(dev_desc, &info, cmd, download_buffer, download_bytes); } + +void fb_mmc_erase(const char *cmd, char *response) +{ + int ret; + block_dev_desc_t *dev_desc; + disk_partition_t info; + lbaint_t blks, blks_start, blks_size, grp_size; + struct mmc *mmc = find_mmc_device(CONFIG_FASTBOOT_FLASH_MMC_DEV); + + if (mmc == NULL) { + error("invalid mmc device"); + fastboot_fail("invalid mmc device"); + return; + } + + /* initialize the response buffer */ + response_str = response; + + dev_desc = get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV); + if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) { + error("invalid mmc device"); + fastboot_fail("invalid mmc device"); + return; + } + + ret = get_partition_info_efi_by_name(dev_desc, cmd, &info); + if (ret) { + error("cannot find partition: '%s'", cmd); + fastboot_fail("cannot find partition"); + return; + } + + /* Align blocks to erase group size to avoid erasing other partitions */ + grp_size = mmc->erase_grp_size; + blks_start = (info.start + grp_size - 1) & ~(grp_size - 1); + if (info.size >= grp_size) + blks_size = (info.size - (blks_start - info.start)) & + (~(grp_size - 1)); + else + blks_size = 0; + + printf("Erasing blocks " LBAFU " to " LBAFU " due to alignment\n", + blks_start, blks_start + blks_size); + + blks = dev_desc->block_erase(dev_desc->dev, blks_start, blks_size); + if (blks != blks_size) { + error("failed erasing from device %d", dev_desc->dev); + fastboot_fail("failed erasing from device"); + return; + } + + printf("........ erased " LBAFU " bytes from '%s'\n", + blks_size * info.blksz, cmd); + fastboot_okay(""); +} diff --git a/common/hash.c b/common/hash.c index d154d02..9e9f84b 100644 --- a/common/hash.c +++ b/common/hash.c @@ -127,11 +127,21 @@ static struct hash_algo hash_algo[] = { SHA1_SUM_LEN, hw_sha1, CHUNKSZ_SHA1, +#ifdef CONFIG_SHA_PROG_HW_ACCEL + hw_sha_init, + hw_sha_update, + hw_sha_finish, +#endif }, { "sha256", SHA256_SUM_LEN, hw_sha256, CHUNKSZ_SHA256, +#ifdef CONFIG_SHA_PROG_HW_ACCEL + hw_sha_init, + hw_sha_update, + hw_sha_finish, +#endif }, #endif #ifdef CONFIG_SHA1 diff --git a/common/lcd_console.c b/common/lcd_console.c index 74c388a..8bf83b9 100644 --- a/common/lcd_console.c +++ b/common/lcd_console.c @@ -209,3 +209,42 @@ void lcd_printf(const char *fmt, ...) lcd_puts(buf); } + +static int do_lcd_setcursor(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + unsigned int col, row; + + if (argc != 3) + return CMD_RET_USAGE; + + col = simple_strtoul(argv[1], NULL, 10); + row = simple_strtoul(argv[2], NULL, 10); + lcd_position_cursor(col, row); + + return 0; +} + +static int do_lcd_puts(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + if (argc != 2) + return CMD_RET_USAGE; + + lcd_puts(argv[1]); + + return 0; +} + +U_BOOT_CMD( + setcurs, 3, 1, do_lcd_setcursor, + "set cursor position within screen", + " <col> <row> in character" +); + +U_BOOT_CMD( + lcdputs, 2, 1, do_lcd_puts, + "print string on lcd-framebuffer", + " <string>" +); + diff --git a/common/spl/spl.c b/common/spl/spl.c index ded0f30..cd75bbc 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -281,3 +281,38 @@ void preloader_console_init(void) spl_display_print(); #endif } + +/** + * spl_relocate_stack_gd() - Relocate stack ready for board_init_r() execution + * + * Sometimes board_init_f() runs with a stack in SRAM but we want to use SDRAM + * for the main board_init_r() execution. This is typically because we need + * more stack space for things like the MMC sub-system. + * + * This function calculates the stack position, copies the global_data into + * place and returns the new stack position. The caller is responsible for + * setting up the sp register. + * + * @return new stack location, or 0 to use the same stack + */ +ulong spl_relocate_stack_gd(void) +{ +#ifdef CONFIG_SPL_STACK_R + gd_t *new_gd; + ulong ptr; + + /* Get stack position: use 8-byte alignment for ABI compliance */ + ptr = CONFIG_SPL_STACK_R - sizeof(gd_t); + ptr &= ~7; + new_gd = (gd_t *)ptr; + memcpy(new_gd, (void *)gd, sizeof(gd_t)); + gd = new_gd; + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + return ptr; +#else + return 0; +#endif +} |