summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
Diffstat (limited to 'common')
-rw-r--r--common/cmd_mii.c8
-rw-r--r--common/miiphyutil.c151
2 files changed, 99 insertions, 60 deletions
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 72e11d5..3b4dc8a 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -112,9 +112,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"OUI = 0x%04X, "
"Model = 0x%02X, "
"Rev = 0x%02X, "
- "%3dbaseT, %s\n",
+ "%3dbase%s, %s\n",
j, oui, model, rev,
miiphy_speed (devname, j),
+ miiphy_is_1000base_x (devname, j)
+ ? "X" : "T",
(miiphy_duplex (devname, j) == FULL)
? "FDX" : "HDX");
}
@@ -496,9 +498,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"OUI = 0x%04X, "
"Model = 0x%02X, "
"Rev = 0x%02X, "
- "%3dbaseT, %s\n",
+ "%3dbase%s, %s\n",
j, oui, model, rev,
miiphy_speed (devname, j),
+ miiphy_is_1000base_x (devname, j)
+ ? "X" : "T",
(miiphy_duplex (devname, j) == FULL)
? "FDX" : "HDX");
}
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 58ebc5e..281f0b2 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -344,101 +344,136 @@ int miiphy_reset (char *devname, unsigned char addr)
/*****************************************************************************
*
- * Determine the ethernet speed (10/100).
+ * Determine the ethernet speed (10/100/1000). Return 10 on error.
*/
int miiphy_speed (char *devname, unsigned char addr)
{
- unsigned short reg;
+ u16 bmcr, anlpar;
#if defined(CONFIG_PHY_GIGE)
- if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
- printf ("PHY 1000BT Status read failed\n");
- } else {
- if (reg != 0xFFFF) {
- if ((reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))
- != 0) {
- return (_1000BASET);
- }
- }
+ u16 btsr;
+
+ /*
+ * Check for 1000BASE-X. If it is supported, then assume that the speed
+ * is 1000.
+ */
+ if (miiphy_is_1000base_x (devname, addr)) {
+ return _1000BASET;
+ }
+ /*
+ * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+ */
+ /* Check for 1000BASE-T. */
+ if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+ printf ("PHY 1000BT status");
+ goto miiphy_read_failed;
+ }
+ if (btsr != 0xFFFF &&
+ (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
+ return _1000BASET;
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
- puts ("PHY speed read failed, assuming 10bT\n");
- return (_10BASET);
+ if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+ printf ("PHY speed");
+ goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
- if ((reg & PHY_BMCR_AUTON) != 0) {
+ if (bmcr & PHY_BMCR_AUTON) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
- puts ("PHY AN speed read failed, assuming 10bT\n");
- return (_10BASET);
- }
- if ((reg & PHY_ANLPAR_100) != 0) {
- return (_100BASET);
- } else {
- return (_10BASET);
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ printf ("PHY AN speed");
+ goto miiphy_read_failed;
}
+ return (anlpar & PHY_ANLPAR_100) ? _100BASET : _10BASET;
}
/* Get speed from basic control settings. */
- else if (reg & PHY_BMCR_100MB) {
- return (_100BASET);
- } else {
- return (_10BASET);
- }
+ return (bmcr & PHY_BMCR_100MB) ? _100BASET : _10BASET;
+ miiphy_read_failed:
+ printf (" read failed, assuming 10BASE-T\n");
+ return _10BASET;
}
/*****************************************************************************
*
- * Determine full/half duplex.
+ * Determine full/half duplex. Return half on error.
*/
int miiphy_duplex (char *devname, unsigned char addr)
{
- unsigned short reg;
+ u16 bmcr, anlpar;
#if defined(CONFIG_PHY_GIGE)
- if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
- printf ("PHY 1000BT Status read failed\n");
- } else {
- if ((reg != 0xFFFF) &&
- (reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
- if ((reg & PHY_1000BTSR_1000FD) != 0) {
- return (FULL);
- } else {
- return (HALF);
- }
+ u16 btsr;
+
+ /* Check for 1000BASE-X. */
+ if (miiphy_is_1000base_x (devname, addr)) {
+ /* 1000BASE-X */
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ printf ("1000BASE-X PHY AN duplex");
+ goto miiphy_read_failed;
+ }
+ }
+ /*
+ * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+ */
+ /* Check for 1000BASE-T. */
+ if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+ printf ("PHY 1000BT status");
+ goto miiphy_read_failed;
+ }
+ if (btsr != 0xFFFF) {
+ if (btsr & PHY_1000BTSR_1000FD) {
+ return FULL;
+ } else if (btsr & PHY_1000BTSR_1000HD) {
+ return HALF;
}
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
- puts ("PHY duplex read failed, assuming half duplex\n");
- return (HALF);
+ if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+ puts ("PHY duplex");
+ goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
- if ((reg & PHY_BMCR_AUTON) != 0) {
+ if (bmcr & PHY_BMCR_AUTON) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
- puts ("PHY AN duplex read failed, assuming half duplex\n");
- return (HALF);
- }
-
- if ((reg & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) != 0) {
- return (FULL);
- } else {
- return (HALF);
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ puts ("PHY AN duplex");
+ goto miiphy_read_failed;
}
+ return (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ?
+ FULL : HALF;
}
/* Get speed from basic control settings. */
- else if (reg & PHY_BMCR_DPLX) {
- return (FULL);
- } else {
- return (HALF);
- }
+ return (bmcr & PHY_BMCR_DPLX) ? FULL : HALF;
+
+ miiphy_read_failed:
+ printf (" read failed, assuming half duplex\n");
+ return HALF;
+}
+/*****************************************************************************
+ *
+ * Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
+ * 1000BASE-T, or on error.
+ */
+int miiphy_is_1000base_x (char *devname, unsigned char addr)
+{
+#if defined(CONFIG_PHY_GIGE)
+ u16 exsr;
+
+ if (miiphy_read (devname, addr, PHY_EXSR, &exsr)) {
+ printf ("PHY extended status read failed, assuming no "
+ "1000BASE-X\n");
+ return 0;
+ }
+ return 0 != (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH));
+#else
+ return 0;
+#endif
}
#ifdef CFG_FAULT_ECHO_LINK_DOWN