diff options
Diffstat (limited to 'common')
| -rw-r--r-- | common/board_f.c | 6 | ||||
| -rw-r--r-- | common/cmd_date.c | 9 | ||||
| -rw-r--r-- | common/cmd_dtt.c | 9 | ||||
| -rw-r--r-- | common/cmd_i2c.c | 121 | ||||
| -rw-r--r-- | common/env_eeprom.c | 14 | ||||
| -rw-r--r-- | common/stdio.c | 13 |
6 files changed, 129 insertions, 43 deletions
diff --git a/common/board_f.c b/common/board_f.c index ab4242a..ca9a760 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -261,7 +261,8 @@ void __dram_init_banksize(void) void dram_init_banksize(void) __attribute__((weak, alias("__dram_init_banksize"))); -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C) static int init_func_i2c(void) { puts("I2C: "); @@ -919,7 +920,8 @@ static init_fnc_t init_sequence_f[] = { misc_init_f, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C) init_func_i2c, #endif #if defined(CONFIG_HARD_SPI) diff --git a/common/cmd_date.c b/common/cmd_date.c index 0ac032c..f7ae1da 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -50,8 +50,13 @@ static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int old_bus; /* switch to correct I2C bus */ +#ifdef CONFIG_SYS_I2C + old_bus = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM); +#else old_bus = I2C_GET_BUS(); I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM); +#endif switch (argc) { case 2: /* set date & time */ @@ -97,7 +102,11 @@ static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } /* switch back to original I2C bus */ +#ifdef CONFIG_SYS_I2C + i2c_set_bus_num(old_bus); +#else I2C_SET_BUS(old_bus); +#endif return rcode; } diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c index edbd4a8..c3f8982 100644 --- a/common/cmd_dtt.c +++ b/common/cmd_dtt.c @@ -73,8 +73,13 @@ int dtt_i2c(void) /* Force a compilation error, if there are more then 32 sensors */ BUILD_BUG_ON(sizeof(sensors) > 32); /* switch to correct I2C bus */ +#ifdef CONFIG_SYS_I2C + old_bus = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM); +#else old_bus = I2C_GET_BUS(); I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM); +#endif _initialize_dtt(); @@ -86,8 +91,12 @@ int dtt_i2c(void) printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i])); /* switch back to original I2C bus */ +#ifdef CONFIG_SYS_I2C + i2c_set_bus_num(old_bus); +#else I2C_SET_BUS(old_bus); #endif +#endif return 0; } diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 4380794..5614a6d 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1,4 +1,9 @@ /* + * (C) Copyright 2009 + * Sergey Kubushyn, himself, ksi@koi8.net + * + * Changes for unified multibus/multiadapter I2C support. + * * (C) Copyright 2001 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. * @@ -85,6 +90,8 @@ #include <asm/byteorder.h> #include <linux/compiler.h> +DECLARE_GLOBAL_DATA_PTR; + /* Display values from last command. * Memory modify remembered values are different from display memory. */ @@ -103,7 +110,8 @@ static uint i2c_mm_last_alen; * pairs. The following macros take care of this */ #if defined(CONFIG_SYS_I2C_NOPROBES) -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MUX) || \ + defined(CONFIG_I2C_MULTI_BUS) static struct { uchar bus; @@ -119,7 +127,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; #define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */ #define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a)) #define NO_PROBE_ADDR(i) i2c_no_probes[(i)] -#endif /* CONFIG_MULTI_BUS */ +#endif /* defined(CONFIG_SYS_I2C) */ #define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0])) #endif @@ -127,9 +135,6 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; #if defined(CONFIG_I2C_MUX) static I2C_MUX_DEVICE *i2c_mux_devices = NULL; static int i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS; - -DECLARE_GLOBAL_DATA_PTR; - #endif #define DISP_LINE_LEN 16 @@ -144,7 +149,6 @@ DECLARE_GLOBAL_DATA_PTR; __weak void i2c_init_board(void) { - return; } /* TODO: Implement architecture-specific get/set functions */ @@ -161,6 +165,11 @@ void i2c_init_board(void) * * Returns I2C bus speed in Hz. */ +#if !defined(CONFIG_SYS_I2C) +/* + * TODO: Implement architecture-specific get/set functions + * Should go away, if we switched completely to new multibus support + */ __weak unsigned int i2c_get_bus_speed(void) { @@ -188,6 +197,7 @@ int i2c_set_bus_speed(unsigned int speed) return 0; } +#endif /** * get_alen() - Small parser helper function to get address length @@ -700,7 +710,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv int found = 0; #if defined(CONFIG_SYS_I2C_NOPROBES) int k, skip; - uchar bus = GET_BUS_NUM; + unsigned int bus = GET_BUS_NUM; #endif /* NOPROBES */ if (argc == 2) @@ -1373,9 +1383,8 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) } #endif /* CONFIG_I2C_EDID */ -#if defined(CONFIG_I2C_MUX) /** - * do_i2c_add_bus() - Handle the "i2c bus" command-line command + * do_i2c_show_bus() - Handle the "i2c bus" command-line command * @cmdtp: Command data struct pointer * @flag: Command flag * @argc: Command-line argument count @@ -1383,35 +1392,55 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) * * Returns zero always. */ -static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +#if defined(CONFIG_SYS_I2C) +int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int ret=0; + int i; +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + int j; +#endif if (argc == 1) { /* show all busses */ - I2C_MUX *mux; - I2C_MUX_DEVICE *device = i2c_mux_devices; - - printf ("Busses reached over muxes:\n"); - while (device != NULL) { - printf ("Bus ID: %x\n", device->busid); - printf (" reached over Mux(es):\n"); - mux = device->mux; - while (mux != NULL) { - printf (" %s@%x ch: %x\n", mux->name, mux->chip, mux->channel); - mux = mux->next; + for (i = 0; i < CONFIG_SYS_NUM_I2C_BUSES; i++) { + printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name); +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) { + if (i2c_bus[i].next_hop[j].chip == 0) + break; + printf("->%s@0x%2x:%d", + i2c_bus[i].next_hop[j].mux.name, + i2c_bus[i].next_hop[j].chip, + i2c_bus[i].next_hop[j].channel); } - device = device->next; +#endif + printf("\n"); } } else { - (void)i2c_mux_ident_muxstring ((uchar *)argv[1]); - ret = 0; + /* show specific bus */ + i = simple_strtoul(argv[1], NULL, 10); + if (i >= CONFIG_SYS_NUM_I2C_BUSES) { + printf("Invalid bus %d\n", i); + return -1; + } + printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name); +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) { + if (i2c_bus[i].next_hop[j].chip == 0) + break; + printf("->%s@0x%2x:%d", + i2c_bus[i].next_hop[j].mux.name, + i2c_bus[i].next_hop[j].chip, + i2c_bus[i].next_hop[j].channel); + } +#endif + printf("\n"); } - return ret; + + return 0; } -#endif /* CONFIG_I2C_MUX */ +#endif -#if defined(CONFIG_I2C_MULTI_BUS) /** * do_i2c_bus_num() - Handle the "i2c dev" command-line command * @cmdtp: Command data struct pointer @@ -1422,23 +1451,29 @@ static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar * Returns zero on success, CMD_RET_USAGE in case of misuse and negative * on error. */ -static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) +int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int bus_idx, ret=0; + int ret = 0; + unsigned int bus_no; if (argc == 1) /* querying current setting */ printf("Current bus is %d\n", i2c_get_bus_num()); else { - bus_idx = simple_strtoul(argv[1], NULL, 10); - printf("Setting bus to %d\n", bus_idx); - ret = i2c_set_bus_num(bus_idx); + bus_no = simple_strtoul(argv[1], NULL, 10); + if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) { + printf("Invalid bus %d\n", bus_no); + return -1; + } + printf("Setting bus to %d\n", bus_no); + ret = i2c_set_bus_num(bus_no); if (ret) printf("Failure changing bus number (%d)\n", ret); } return ret; } -#endif /* CONFIG_I2C_MULTI_BUS */ +#endif /* defined(CONFIG_SYS_I2C) */ /** * do_i2c_bus_speed() - Handle the "i2c speed" command-line command @@ -1508,16 +1543,21 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) */ static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { +#if defined(CONFIG_SYS_I2C) + i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr); +#else i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif return 0; } static cmd_tbl_t cmd_i2c_sub[] = { -#if defined(CONFIG_I2C_MUX) - U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""), +#if defined(CONFIG_SYS_I2C) + U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""), #endif /* CONFIG_I2C_MUX */ U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""), -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) || \ + defined(CONFIG_I2C_MULTI_BUS) U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""), #endif /* CONFIG_I2C_MULTI_BUS */ #if defined(CONFIG_I2C_EDID) @@ -1576,11 +1616,12 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /***************************************************/ #ifdef CONFIG_SYS_LONGHELP static char i2c_help_text[] = -#if defined(CONFIG_I2C_MUX) - "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c " +#if defined(CONFIG_SYS_I2C) + "bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n" #endif /* CONFIG_I2C_MUX */ "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) || \ + defined(CONFIG_I2C_MULTI_BUS) "i2c dev [dev] - show or set current I2C bus\n" #endif /* CONFIG_I2C_MULTI_BUS */ #if defined(CONFIG_I2C_EDID) diff --git a/common/env_eeprom.c b/common/env_eeprom.c index 45c935b..fbd459a 100644 --- a/common/env_eeprom.c +++ b/common/env_eeprom.c @@ -49,6 +49,10 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset, #if defined(CONFIG_I2C_ENV_EEPROM_BUS) int old_bus = i2c_get_bus_num(); +#if defined(CONFIG_SYS_I2C) + if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS) + i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS); +#else if (gd->flags & GD_FLG_RELOC) { if (env_eeprom_bus == -1) { I2C_MUX_DEVICE *dev = NULL; @@ -68,11 +72,16 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset, (uchar *)CONFIG_I2C_ENV_EEPROM_BUS); } #endif +#endif rcode = eeprom_read(dev_addr, offset, buffer, cnt); #if defined(CONFIG_I2C_ENV_EEPROM_BUS) +#if defined(CONFIG_SYS_I2C) + if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS) +#else if (old_bus != env_eeprom_bus) +#endif i2c_set_bus_num(old_bus); #endif return rcode; @@ -85,8 +94,13 @@ static int eeprom_bus_write(unsigned dev_addr, unsigned offset, #if defined(CONFIG_I2C_ENV_EEPROM_BUS) int old_bus = i2c_get_bus_num(); +#if defined(CONFIG_SYS_I2C) + if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS) + i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS); +#else rcode = i2c_mux_ident_muxstring_f((uchar *)CONFIG_I2C_ENV_EEPROM_BUS); #endif +#endif rcode = eeprom_write(dev_addr, offset, buffer, cnt); #if defined(CONFIG_I2C_ENV_EEPROM_BUS) i2c_set_bus_num(old_bus); diff --git a/common/stdio.c b/common/stdio.c index 5d5117c..2011880 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -1,4 +1,8 @@ /* + * Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net> + * + * Changes for multibus/multiadapter I2C support. + * * (C) Copyright 2000 * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it * @@ -30,7 +34,8 @@ #ifdef CONFIG_LOGBUFFER #include <logbuff.h> #endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \ + defined(CONFIG_SYS_I2C_ADAPTERS) #include <i2c.h> #endif @@ -210,9 +215,15 @@ int stdio_init (void) #ifdef CONFIG_ARM_DCC drv_arm_dcc_init (); #endif +#ifdef CONFIG_SYS_I2C +#ifdef CONFIG_SYS_I2C_ADAPTERS + i2c_init_all(); +#endif +#else #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif +#endif #ifdef CONFIG_LCD drv_lcd_init (); #endif |