summaryrefslogtreecommitdiff
path: root/common/cmd_pcmcia.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/cmd_pcmcia.c')
-rw-r--r--common/cmd_pcmcia.c58
1 files changed, 29 insertions, 29 deletions
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 53d2227..cb4e4c6 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -160,8 +160,8 @@ int pcmcia_on (void)
}
#else
-#ifdef CONFIG_BMS2003
-# define BMS2003_FRAM_TIMING (PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
+#ifdef CONFIG_HMI10
+# define HMI10_FRAM_TIMING (PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
#endif
#if defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
# define CFG_PCMCIA_TIMING (PCMCIA_SHT(9) | PCMCIA_SST(3) | PCMCIA_SL(12))
@@ -200,14 +200,14 @@ int pcmcia_on (void)
switch (i) {
#ifdef CONFIG_IDE_8xx_PCCARD
case 4:
-#ifdef CONFIG_BMS2003
+#ifdef CONFIG_HMI10
{ /* map FRAM area */
win->or = ( PCMCIA_BSIZE_256K
| PCMCIA_PPS_8
| PCMCIA_PRS_ATTR
| slotbit
| PCMCIA_PV
- | BMS2003_FRAM_TIMING );
+ | HMI10_FRAM_TIMING );
break;
}
#endif
@@ -241,7 +241,7 @@ int pcmcia_on (void)
break;
}
#endif /* CONFIG_IDE_8xx_PCCARD */
-#ifdef CONFIG_BMS2003
+#ifdef CONFIG_HMI10
case 3: { /* map I/O window for 4xUART data/ctrl */
win->br += 0x40000;
win->or = ( PCMCIA_BSIZE_256K
@@ -252,7 +252,7 @@ int pcmcia_on (void)
| CFG_PCMCIA_TIMING );
break;
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
default: /* set to not valid */
win->or = 0;
break;
@@ -636,7 +636,7 @@ static int hardware_enable(int slot)
PCMCIA_PGCRX(slot) = reg;
udelay(500);
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
#ifndef CONFIG_NSCU
/*
* Configure Port C pins for
@@ -648,7 +648,7 @@ static int hardware_enable(int slot)
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
#endif
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable
@@ -657,7 +657,7 @@ static int hardware_enable(int slot)
/* remove all power */
immap->im_cpm.cp_pbdat |= 0x00000300;
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
/*
* Make sure there is a card in the slot, then configure the interface.
@@ -666,11 +666,11 @@ static int hardware_enable(int slot)
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
#else
if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
printf (" No Card found\n");
return (1);
}
@@ -686,25 +686,25 @@ static int hardware_enable(int slot)
(reg&PCMCIA_VS2(slot))?"n":"ff");
#ifndef CONFIG_NSCU
if ((reg & mask) == mask) {
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= 0x0004;
#else
immap->im_cpm.cp_pbdat &= ~(0x0000100);
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
puts (" 5.0V card found: ");
} else {
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= 0x0002;
#else
immap->im_cpm.cp_pbdat &= ~(0x0000200);
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
puts (" 3.3V card found: ");
}
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#else
immap->im_cpm.cp_pbdir |= 0x00000300;
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
#else
if ((reg & mask) == mask) {
puts (" 5.0V card found: ");
@@ -749,14 +749,14 @@ static int hardware_disable(int slot)
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
#ifndef CONFIG_NSCU
/* remove all power */
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
#endif
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
immap->im_cpm.cp_pbdat |= 0x00000300;
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
@@ -806,7 +806,7 @@ static int voltage_set(int slot, int vcc, int vpp)
PCMCIA_PGCRX(slot) = reg;
udelay(500);
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable,
@@ -824,7 +824,7 @@ static int voltage_set(int slot, int vcc, int vpp)
case 50: reg |= 0x0004; break;
default: goto done;
}
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable,
@@ -843,7 +843,7 @@ static int voltage_set(int slot, int vcc, int vpp)
case 50: reg |= 0x00000100; break;
default: goto done;
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
/* Checking supported voltages */
@@ -851,21 +851,21 @@ static int voltage_set(int slot, int vcc, int vpp)
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= reg;
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#else
immap->im_cpm.cp_pbdat &= !reg;
immap->im_cpm.cp_pbdir |= 0x00000300;
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
if (reg) {
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
debug ("PCMCIA powered at %sV\n",
(reg&0x0004) ? "5.0" : "3.3");
#else
debug ("PCMCIA powered at %sV\n",
(reg&0x00000200) ? "5.0" : "3.3");
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
} else {
debug ("PCMCIA powered down\n");
}
@@ -1850,11 +1850,11 @@ static int hardware_enable (int slot)
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
#else
if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
printf (" No Card found\n");
return (1);
}