diff options
Diffstat (limited to 'common/cmd_i2c.c')
| -rw-r--r-- | common/cmd_i2c.c | 159 |
1 files changed, 154 insertions, 5 deletions
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index c543bb5..62378af 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -101,8 +101,31 @@ static uchar i2c_mm_last_chip; static uint i2c_mm_last_addr; static uint i2c_mm_last_alen; +/* If only one I2C bus is present, the list of devices to ignore when + * the probe command is issued is represented by a 1D array of addresses. + * When multiple buses are present, the list is an array of bus-address + * pairs. The following macros take care of this */ + #if defined(CFG_I2C_NOPROBES) +#if defined(CONFIG_I2C_MULTI_BUS) +static struct +{ + uchar bus; + uchar addr; +} i2c_no_probes[] = CFG_I2C_NOPROBES; +#define GET_BUS_NUM i2c_get_bus_num() +#define COMPARE_BUS(b,i) (i2c_no_probes[(i)].bus == (b)) +#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)].addr == (a)) +#define NO_PROBE_ADDR(i) i2c_no_probes[(i)].addr +#else /* single bus */ static uchar i2c_no_probes[] = CFG_I2C_NOPROBES; +#define GET_BUS_NUM 0 +#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */ +#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a)) +#define NO_PROBE_ADDR(i) i2c_no_probes[(i)] +#endif /* CONFIG_MULTI_BUS */ + +#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0])) #endif static int @@ -538,14 +561,17 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int j; #if defined(CFG_I2C_NOPROBES) int k, skip; -#endif + uchar bus = GET_BUS_NUM; +#endif /* NOPROBES */ puts ("Valid chip addresses:"); for(j = 0; j < 128; j++) { #if defined(CFG_I2C_NOPROBES) skip = 0; - for (k = 0; k < sizeof(i2c_no_probes); k++){ - if (j == i2c_no_probes[k]){ + for(k=0; k < NUM_ELEMENTS_NOPROBE; k++) + { + if(COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) + { skip = 1; break; } @@ -561,8 +587,11 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #if defined(CFG_I2C_NOPROBES) puts ("Excluded chip addresses:"); - for( k = 0; k < sizeof(i2c_no_probes); k++ ) - printf(" %02X", i2c_no_probes[k] ); + for(k=0; k < NUM_ELEMENTS_NOPROBE; k++) + { + if(COMPARE_BUS(bus,k)) + printf(" %02X", NO_PROBE_ADDR(k)); + } putc ('\n'); #endif @@ -873,6 +902,104 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } #endif /* CFG_CMD_SDRAM */ +#if defined(CONFIG_I2C_CMD_TREE) +#if defined(CONFIG_I2C_MULTI_BUS) +int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int bus_idx, ret=0; + + if (argc == 1) /* querying current setting */ + { + printf("Current bus is %d\n", i2c_get_bus_num()); + } + else + { + bus_idx = simple_strtoul(argv[1], NULL, 10); + printf("Setting bus to %d\n", bus_idx); + ret = i2c_set_bus_num(bus_idx); + if(ret) + { + printf("Failure changing bus number (%d)\n", ret); + } + } + return ret; +} +#endif /* CONFIG_I2C_MULTI_BUS */ + +int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int speed, ret=0; + + if (argc == 1) /* querying current speed */ + { + printf("Current bus speed=%d\n", i2c_get_bus_speed()); + } + else + { + speed = simple_strtoul(argv[1], NULL, 10); + printf("Setting bus speed to %d Hz\n", speed); + ret = i2c_set_bus_speed(speed); + if(ret) + { + printf("Failure changing bus speed (%d)\n", ret); + } + } + return ret; +} + +int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ +#if defined(CONFIG_I2C_MULTI_BUS) + if(!strncmp(argv[1], "de", 2)) + { + return do_i2c_bus_num(cmdtp, flag, --argc, ++argv); + } +#endif /* CONFIG_I2C_MULTI_BUS */ + if(!strncmp(argv[1], "sp", 2)) + { + return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "md", 2)) + { + return do_i2c_md(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "mm", 2)) + { + return do_i2c_mm(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "mw", 2)) + { + return do_i2c_mw(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "nm", 2)) + { + return do_i2c_nm(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "cr", 2)) + { + return do_i2c_crc(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "pr", 2)) + { + return do_i2c_probe(cmdtp, flag, --argc, ++argv); + } + if(!strncmp(argv[1], "lo", 2)) + { + return do_i2c_loop(cmdtp, flag, --argc, ++argv); + } +#if (CONFIG_COMMANDS & CFG_CMD_SDRAM) + if(!strncmp(argv[1], "sd", 2)) + { + return do_sdram(cmdtp, flag, --argc, ++argv); + } +#endif /* CFG_CMD_SDRAM */ + else + { + printf ("Usage:\n%s\n", cmdtp->usage); + } + return 0; +} +#endif /* CONFIG_I2C_CMD_TREE */ /***************************************************/ @@ -930,4 +1057,26 @@ U_BOOT_CMD( " (valid chip values 50..57)\n" ); #endif + +#if defined(CONFIG_I2C_CMD_TREE) +U_BOOT_CMD( + i2c, 6, 1, do_i2c, + "i2c - I2C sub-system\n", +#if defined(CONFIG_I2C_MULTI_BUS) + "dev [dev] - show or set current I2C bus\n" +#endif /* CONFIG_I2C_MULTI_BUS */ + "i2c speed [speed] - show or set I2C bus speed\n" + "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n" + "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n" + "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n" + "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" + "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" + "i2c probe - show devices on the I2C bus\n" + "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n" +#if (CONFIG_COMMANDS & CFG_CMD_SDRAM) + "i2c sdram chip - print SDRAM configuration information\n" +#endif /* CFG_CMD_SDRAM */ +); +#endif /* CONFIG_I2C_CMD_TREE */ + #endif /* CFG_CMD_I2C */ |