summaryrefslogtreecommitdiff
path: root/common/cmd_eeprom.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/cmd_eeprom.c')
-rw-r--r--common/cmd_eeprom.c353
1 files changed, 353 insertions, 0 deletions
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
new file mode 100644
index 0000000..29e9faf
--- /dev/null
+++ b/common/cmd_eeprom.c
@@ -0,0 +1,353 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) || defined(CFG_ENV_IS_IN_EEPROM)
+
+extern void eeprom_init (void);
+extern int eeprom_read (unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt);
+extern int eeprom_write (unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt);
+#endif
+
+
+#if defined(CFG_EEPROM_X40430)
+ /* Maximum number of times to poll for acknowledge after write */
+#define MAX_ACKNOWLEDGE_POLLS 10
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
+int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ const char *const fmt =
+ "\nEEPROM @0x%lX %s: addr %08lx off %04lx count %ld ... ";
+
+#if defined(CFG_I2C_MULTI_EEPROMS)
+ if (argc == 6) {
+ ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
+ ulong addr = simple_strtoul (argv[3], NULL, 16);
+ ulong off = simple_strtoul (argv[4], NULL, 16);
+ ulong cnt = simple_strtoul (argv[5], NULL, 16);
+#else
+ if (argc == 5) {
+ ulong dev_addr = CFG_DEF_EEPROM_ADDR;
+ ulong addr = simple_strtoul (argv[2], NULL, 16);
+ ulong off = simple_strtoul (argv[3], NULL, 16);
+ ulong cnt = simple_strtoul (argv[4], NULL, 16);
+#endif /* CFG_I2C_MULTI_EEPROMS */
+
+# ifndef CONFIG_SPI
+ eeprom_init ();
+# endif /* !CONFIG_SPI */
+
+ if (strcmp (argv[1], "read") == 0) {
+ int rcode;
+
+ printf (fmt, dev_addr, argv[1], addr, off, cnt);
+
+ rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt);
+
+ printf ("done\n");
+ return rcode;
+ } else if (strcmp (argv[1], "write") == 0) {
+ int rcode;
+
+ printf (fmt, dev_addr, argv[1], addr, off, cnt);
+
+ rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt);
+
+ printf ("done\n");
+ return rcode;
+ }
+ }
+
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+#endif /* CFG_CMD_EEPROM */
+
+/*-----------------------------------------------------------------------
+ *
+ * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
+ *
+ * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ * 0x00000nxx for EEPROM address selectors and page number at n.
+ */
+
+#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) || defined(CFG_ENV_IS_IN_EEPROM)
+
+#ifndef CONFIG_SPI
+#if !defined(CFG_I2C_EEPROM_ADDR_LEN) || CFG_I2C_EEPROM_ADDR_LEN < 1 || CFG_I2C_EEPROM_ADDR_LEN > 2
+#error CFG_I2C_EEPROM_ADDR_LEN must be 1 or 2
+#endif
+#endif
+
+int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+ unsigned end = offset + cnt;
+ unsigned blk_off;
+ int rcode = 0;
+
+ /* Read data until done or would cross a page boundary.
+ * We must write the address again when changing pages
+ * because the next page may be in a different device.
+ */
+ while (offset < end) {
+ unsigned alen, len, maxlen;
+#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+ uchar addr[2];
+
+ blk_off = offset & 0xFF; /* block offset */
+
+ addr[0] = offset >> 8; /* block number */
+ addr[1] = blk_off; /* block offset */
+ alen = 2;
+#else
+ uchar addr[3];
+
+ blk_off = offset & 0xFF; /* block offset */
+
+ addr[0] = offset >> 16; /* block number */
+ addr[1] = offset >> 8; /* upper address octet */
+ addr[2] = blk_off; /* lower address octet */
+ alen = 3;
+#endif /* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+
+ addr[0] |= dev_addr; /* insert device address */
+
+ maxlen = 0x100 - blk_off;
+ if (maxlen > I2C_RXTX_LEN)
+ maxlen = I2C_RXTX_LEN;
+ len = end - offset;
+ if (len > maxlen)
+ len = maxlen;
+#ifdef CONFIG_SPI
+ spi_read (addr, alen, buffer, len);
+#else
+ if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
+ rcode = 1;
+#endif
+ buffer += len;
+ offset += len;
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ *
+ * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
+ *
+ * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ * 0x00000nxx for EEPROM address selectors and page number at n.
+ */
+
+int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+ unsigned end = offset + cnt;
+ unsigned blk_off;
+ int rcode = 0;
+
+#if defined(CFG_EEPROM_X40430)
+ uchar contr_r_addr[2];
+ uchar addr_void[2];
+ uchar contr_reg[2];
+ uchar ctrl_reg_v;
+ int i;
+#endif
+
+ /* Write data until done or would cross a write page boundary.
+ * We must write the address again when changing pages
+ * because the address counter only increments within a page.
+ */
+
+ while (offset < end) {
+ unsigned alen, len, maxlen;
+#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+ uchar addr[2];
+
+ blk_off = offset & 0xFF; /* block offset */
+
+ addr[0] = offset >> 8; /* block number */
+ addr[1] = blk_off; /* block offset */
+ alen = 2;
+#else
+ uchar addr[3];
+
+ blk_off = offset & 0xFF; /* block offset */
+
+ addr[0] = offset >> 16; /* block number */
+ addr[1] = offset >> 8; /* upper address octet */
+ addr[2] = blk_off; /* lower address octet */
+ alen = 3;
+#endif /* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+
+ addr[0] |= dev_addr; /* insert device address */
+
+#if defined(CFG_EEPROM_PAGE_WRITE_BITS)
+
+#define EEPROM_PAGE_SIZE (1 << CFG_EEPROM_PAGE_WRITE_BITS)
+#define EEPROM_PAGE_OFFSET(x) ((x) & (EEPROM_PAGE_SIZE - 1))
+
+ maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
+#else
+ maxlen = 0x100 - blk_off;
+#endif
+ if (maxlen > I2C_RXTX_LEN)
+ maxlen = I2C_RXTX_LEN;
+
+ len = end - offset;
+ if (len > maxlen)
+ len = maxlen;
+#ifdef CONFIG_SPI
+ spi_write (addr, alen, buffer, len);
+#else
+#if defined(CFG_EEPROM_X40430)
+ /* Get the value of the control register.
+ * Set current address (internal pointer in the x40430)
+ * to 0x1ff.
+ */
+ contr_r_addr[0] = 9;
+ contr_r_addr[1] = 0xff;
+ addr_void[0] = 0;
+ addr_void[1] = addr[1];
+#ifdef CFG_I2C_EEPROM_ADDR
+ contr_r_addr[0] |= CFG_I2C_EEPROM_ADDR;
+ addr_void[0] |= CFG_I2C_EEPROM_ADDR;
+#endif
+ contr_reg[0] = 0xff;
+ if (i2c_read (contr_r_addr[0], contr_r_addr[1], 1, contr_reg, 1) != 0) {
+ rcode = 1;
+ }
+ ctrl_reg_v = contr_reg[0];
+
+ /* Are any of the eeprom blocks write protected?
+ */
+ if (ctrl_reg_v & 0x18) {
+ ctrl_reg_v &= ~0x18; /* reset block protect bits */
+ ctrl_reg_v |= 0x02; /* set write enable latch */
+ ctrl_reg_v &= ~0x04; /* clear RWEL */
+
+ /* Set write enable latch.
+ */
+ contr_reg[0] = 0x02;
+ if (i2c_write (contr_r_addr[0], 0xff, 1, contr_reg, 1) != 0) {
+ rcode = 1;
+ }
+
+ /* Set register write enable latch.
+ */
+ contr_reg[0] = 0x06;
+ if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
+ rcode = 1;
+ }
+
+ /* Modify ctrl register.
+ */
+ contr_reg[0] = ctrl_reg_v;
+ if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
+ rcode = 1;
+ }
+
+ /* The write (above) is an operation on NV memory.
+ * These can take some time (~5ms), and the device
+ * will not respond to further I2C messages till
+ * it's completed the write.
+ * So poll device for an I2C acknowledge.
+ * When we get one we know we can continue with other
+ * operations.
+ */
+ contr_reg[0] = 0;
+ for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) {
+ if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 1)
+ break; /* got ack */
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+ }
+ if (i == MAX_ACKNOWLEDGE_POLLS) {
+ printf("EEPROM poll acknowledge failed\n");
+ rcode = 1;
+ }
+ }
+
+ /* Is the write enable latch on?.
+ */
+ else if (!(ctrl_reg_v & 0x02)) {
+ /* Set write enable latch.
+ */
+ contr_reg[0] = 0x02;
+ if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
+ rcode = 1;
+ }
+ }
+ /* Write is enabled ... now write eeprom value.
+ */
+#endif
+ if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
+ rcode = 1;
+
+#endif
+ buffer += len;
+ offset += len;
+
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Set default values
+ */
+#ifndef CFG_I2C_SPEED
+#define CFG_I2C_SPEED 50000
+#endif
+
+#ifndef CFG_I2C_SLAVE
+#define CFG_I2C_SLAVE 0xFE
+#endif
+
+void eeprom_init (void)
+{
+#if defined(CONFIG_SPI)
+ spi_init_f ();
+#endif
+#if defined(CONFIG_HARD_I2C) || \
+ defined(CONFIG_SOFT_I2C)
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+#endif
+}
+/*-----------------------------------------------------------------------
+ */
+#endif /* CFG_CMD_EEPROM */