diff options
Diffstat (limited to 'common/Kconfig')
| -rw-r--r-- | common/Kconfig | 586 |
1 files changed, 0 insertions, 586 deletions
diff --git a/common/Kconfig b/common/Kconfig index 9d446bf..067545d 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1,522 +1,3 @@ -menu "Command line interface" - -config HUSH_PARSER - bool "Use hush shell" - select SYS_HUSH_PARSER - help - This option enables the "hush" shell (from Busybox) as command line - interpreter, thus enabling powerful command line syntax like - if...then...else...fi conditionals or `&&' and '||' - constructs ("shell scripts"). - - If disabled, you get the old, much simpler behaviour with a somewhat - smaller memory footprint. - -config SYS_HUSH_PARSER - bool - help - Backward compatibility. - -config SYS_PROMPT - string "Shell prompt" - default "=> " - help - This string is displayed in the command line to the left of the - cursor. - -menu "Autoboot options" - -config AUTOBOOT_KEYED - bool "Stop autobooting via specific input key / string" - default n - help - This option enables stopping (aborting) of the automatic - boot feature only by issuing a specific input key or - string. If not enabled, any input key will abort the - U-Boot automatic booting process and bring the device - to the U-Boot prompt for user input. - -config AUTOBOOT_PROMPT - string "Autoboot stop prompt" - depends on AUTOBOOT_KEYED - default "Autoboot in %d seconds\\n" - help - This string is displayed before the boot delay selected by - CONFIG_BOOTDELAY starts. If it is not defined there is no - output indicating that autoboot is in progress. - - Note that this define is used as the (only) argument to a - printf() call, so it may contain '%' format specifications, - provided that it also includes, sepearated by commas exactly - like in a printf statement, the required arguments. It is - the responsibility of the user to select only such arguments - that are valid in the given context. - -config AUTOBOOT_ENCRYPTION - bool "Enable encryption in autoboot stopping" - depends on AUTOBOOT_KEYED - default n - -config AUTOBOOT_DELAY_STR - string "Delay autobooting via specific input key / string" - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION - help - This option delays the automatic boot feature by issuing - a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR - or the environment variable "bootdelaykey" is specified - and this string is received from console input before - autoboot starts booting, U-Boot gives a command prompt. The - U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is - used, otherwise it never times out. - -config AUTOBOOT_STOP_STR - string "Stop autobooting via specific input key / string" - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION - help - This option enables stopping (aborting) of the automatic - boot feature only by issuing a specific input key or - string. If CONFIG_AUTOBOOT_STOP_STR or the environment - variable "bootstopkey" is specified and this string is - received from console input before autoboot starts booting, - U-Boot gives a command prompt. The U-Boot prompt never - times out, even if CONFIG_BOOT_RETRY_TIME is used. - -config AUTOBOOT_KEYED_CTRLC - bool "Enable Ctrl-C autoboot interruption" - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION - default n - help - This option allows for the boot sequence to be interrupted - by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". - Setting this variable provides an escape sequence from the - limited "password" strings. - -config AUTOBOOT_STOP_STR_SHA256 - string "Stop autobooting via SHA256 encrypted password" - depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION - help - This option adds the feature to only stop the autobooting, - and therefore boot into the U-Boot prompt, when the input - string / password matches a values that is encypted via - a SHA256 hash and saved in the environment. - -endmenu - -comment "Commands" - -menu "Info commands" - -config CMD_BDI - bool "bdinfo" - default y - help - Print board info - -config CMD_CONSOLE - bool "coninfo" - default y - help - Print console devices and information. - -config CMD_CPU - bool "cpu" - help - Print information about available CPUs. This normally shows the - number of CPUs, type (e.g. manufacturer, architecture, product or - internal name) and clock frequency. Other information may be - available depending on the CPU driver. - -config CMD_LICENSE - bool "license" - help - Print GPL license text - -endmenu - -menu "Boot commands" - -config CMD_BOOTD - bool "bootd" - default y - help - Run the command stored in the environment "bootcmd", i.e. - "bootd" does the same thing as "run bootcmd". - -config CMD_BOOTM - bool "bootm" - default y - help - Boot an application image from the memory. - -config CMD_ELF - bool "bootelf, bootvx" - default y - help - Boot an ELF/vxWorks image from the memory. - -config CMD_GO - bool "go" - default y - help - Start an application at a given address. - -config CMD_RUN - bool "run" - default y - help - Run the command in the given environment variable. - -config CMD_IMI - bool "iminfo" - default y - help - Print header information for application image. - -config CMD_IMLS - bool "imls" - default y - help - List all images found in flash - -config CMD_XIMG - bool "imxtract" - default y - help - Extract a part of a multi-image. - -config CMD_POWEROFF - bool - -endmenu - -menu "Environment commands" - -config CMD_EXPORTENV - bool "env export" - default y - help - Export environments. - -config CMD_IMPORTENV - bool "env import" - default y - help - Import environments. - -config CMD_EDITENV - bool "editenv" - default y - help - Edit environment variable. - -config CMD_SAVEENV - bool "saveenv" - default y - help - Save all environment variables into the compiled-in persistent - storage. - -config CMD_ENV_EXISTS - bool "env exists" - default y - help - Check if a variable is defined in the environment for use in - shell scripting. - -endmenu - -menu "Memory commands" - -config CMD_MEMORY - bool "md, mm, nm, mw, cp, cmp, base, loop" - default y - help - Memeory commands. - md - memory display - mm - memory modify (auto-incrementing address) - nm - memory modify (constant address) - mw - memory write (fill) - cp - memory copy - cmp - memory compare - base - print or set address offset - loop - initinite loop on address range - -config CMD_CRC32 - bool "crc32" - default y - help - Compute CRC32. - -config LOOPW - bool "loopw" - help - Infinite write loop on address range - -config CMD_MEMTEST - bool "memtest" - help - Simple RAM read/write test. - -config CMD_MX_CYCLIC - bool "mdc, mwc" - help - mdc - memory display cyclic - mwc - memory write cyclic - -config CMD_MEMINFO - bool "meminfo" - help - Display memory information. - -endmenu - -menu "Device access commands" - -config CMD_DM - bool "dm - Access to driver model information" - depends on DM - default y - help - Provides access to driver model data structures and information, - such as a list of devices, list of uclasses and the state of each - device (e.g. activated). This is not required for operation, but - can be useful to see the state of driver model for debugging or - interest. - -config CMD_DEMO - bool "demo - Demonstration commands for driver model" - depends on DM - help - Provides a 'demo' command which can be used to play around with - driver model. To use this properly you will need to enable one or - both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). - Otherwise you will always get an empty list of devices. The demo - devices are defined in the sandbox device tree, so the easiest - option is to use sandbox and pass the -d point to sandbox's - u-boot.dtb file. - -config CMD_LOADB - bool "loadb" - default y - help - Load a binary file over serial line. - -config CMD_LOADS - bool "loads" - default y - help - Load an S-Record file over serial line - -config CMD_FLASH - bool "flinfo, erase, protect" - default y - help - NOR flash support. - flinfo - print FLASH memory information - erase - FLASH memory - protect - enable or disable FLASH write protection - -config CMD_ARMFLASH - depends on FLASH_CFI_DRIVER - bool "armflash" - help - ARM Ltd reference designs flash partition access - -config CMD_NAND - bool "nand" - help - NAND support. - -config CMD_SF - bool "sf" - help - SPI Flash support - -config CMD_SPI - bool "sspi" - help - SPI utility command. - -config CMD_I2C - bool "i2c" - help - I2C support. - -config CMD_USB - bool "usb" - help - USB support. - -config CMD_FPGA - bool "fpga" - default y - help - FPGA support. - -config CMD_REMOTEPROC - bool "remoteproc" - depends on REMOTEPROC - help - Support for Remote Processor control - -config CMD_GPIO - bool "gpio" - help - GPIO support. - -endmenu - - -menu "Shell scripting commands" - -config CMD_ECHO - bool "echo" - default y - help - Echo args to console - -config CMD_ITEST - bool "itest" - default y - help - Return true/false on integer compare. - -config CMD_SOURCE - bool "source" - default y - help - Run script from memory - -config CMD_SETEXPR - bool "setexpr" - default y - help - Evaluate boolean and math expressions and store the result in an env - variable. - Also supports loading the value at a memory location into a variable. - If CONFIG_REGEX is enabled, setexpr also supports a gsub function. - -endmenu - -menu "Network commands" - -config CMD_NET - bool "bootp, tftpboot" - select NET - default y - help - Network commands. - bootp - boot image via network using BOOTP/TFTP protocol - tftpboot - boot image via network using TFTP protocol - -config CMD_TFTPPUT - bool "tftp put" - help - TFTP put command, for uploading files to a server - -config CMD_TFTPSRV - bool "tftpsrv" - help - Act as a TFTP server and boot the first received file - -config CMD_RARP - bool "rarpboot" - help - Boot image via network using RARP/TFTP protocol - -config CMD_DHCP - bool "dhcp" - help - Boot image via network using DHCP/TFTP protocol - -config CMD_NFS - bool "nfs" - default y - help - Boot image via network using NFS protocol. - -config CMD_PING - bool "ping" - help - Send ICMP ECHO_REQUEST to network host - -config CMD_CDP - bool "cdp" - help - Perform CDP network configuration - -config CMD_SNTP - bool "sntp" - help - Synchronize RTC via network - -config CMD_DNS - bool "dns" - help - Lookup the IP of a hostname - -config CMD_LINK_LOCAL - bool "linklocal" - help - Acquire a network IP address using the link-local protocol - -endmenu - -menu "Misc commands" - -config CMD_AMBAPP - bool "ambapp" - depends on LEON3 - default y - help - Lists AMBA Plug-n-Play information. - -config SYS_AMBAPP_PRINT_ON_STARTUP - bool "Show AMBA PnP info on startup" - depends on CMD_AMBAPP - default n - help - Show AMBA Plug-n-Play information on startup. - -config CMD_TIME - bool "time" - help - Run commands and summarize execution time. - -# TODO: rename to CMD_SLEEP -config CMD_MISC - bool "sleep" - default y - help - Delay execution for some time - -config CMD_TIMER - bool "timer" - help - Access the system timer. - -config CMD_SETGETDCR - bool "getdcr, setdcr, getidcr, setidcr" - depends on 4xx - default y - help - getdcr - Get an AMCC PPC 4xx DCR's value - setdcr - Set an AMCC PPC 4xx DCR's value - getidcr - Get a register value via indirect DCR addressing - setidcr - Set a register value via indirect DCR addressing - -config CMD_SOUND - bool "sound" - depends on SOUND - help - This provides basic access to the U-Boot's sound support. The main - feature is to play a beep. - - sound init - set up sound system - sound play - play a sound - -endmenu - menu "Boot timing" config BOOTSTAGE @@ -565,13 +46,6 @@ config BOOTSTAGE_USER_COUNT a new ID will be allocated from this stash. If you exceed the limit, recording will stop. -config CMD_BOOTSTAGE - bool "Enable the 'bootstage' command" - depends on BOOTSTAGE - help - Add a 'bootstage' command which supports printing a report - and un/stashing of bootstage data. - config BOOTSTAGE_FDT bool "Store boot timing information in the OS device tree" depends on BOOTSTAGE @@ -623,66 +97,6 @@ config BOOTSTAGE_STASH_SIZE endmenu -menu "Power commands" -config CMD_PMIC - bool "Enable Driver Model PMIC command" - depends on DM_PMIC - help - This is the pmic command, based on a driver model pmic's API. - Command features are unchanged: - - list - list pmic devices - - pmic dev <id> - show or [set] operating pmic device (NEW) - - pmic dump - dump registers - - pmic read address - read byte of register at address - - pmic write address - write byte to register at address - The only one change for this command is 'dev' subcommand. - -config CMD_REGULATOR - bool "Enable Driver Model REGULATOR command" - depends on DM_REGULATOR - help - This command is based on driver model regulator's API. - User interface features: - - list - list regulator devices - - regulator dev <id> - show or [set] operating regulator device - - regulator info - print constraints info - - regulator status - print operating status - - regulator value <val] <-f> - print/[set] voltage value [uV] - - regulator current <val> - print/[set] current value [uA] - - regulator mode <id> - print/[set] operating mode id - - regulator enable - enable the regulator output - - regulator disable - disable the regulator output - - The '-f' (force) option can be used for set the value which exceeds - the limits, which are found in device-tree and are kept in regulator's - uclass platdata structure. - -endmenu - -menu "Security commands" -config CMD_TPM - bool "Enable the 'tpm' command" - depends on TPM - help - This provides a means to talk to a TPM from the command line. A wide - range of commands if provided - see 'tpm help' for details. The - command requires a suitable TPM on your board and the correct driver - must be enabled. - -config CMD_TPM_TEST - bool "Enable the 'tpm test' command" - depends on CMD_TPM - help - This provides a a series of tests to confirm that the TPM is working - correctly. The tests cover initialisation, non-volatile RAM, extend, - global lock and checking that timing is within expectations. The - tests pass correctly on Infineon TPMs but may need to be adjusted - for other devices. - -endmenu - -endmenu - config CONSOLE_RECORD bool "Console recording" help |