diff options
Diffstat (limited to 'cmd/Kconfig')
| -rw-r--r-- | cmd/Kconfig | 585 |
1 files changed, 585 insertions, 0 deletions
diff --git a/cmd/Kconfig b/cmd/Kconfig new file mode 100644 index 0000000..2ed0263 --- /dev/null +++ b/cmd/Kconfig @@ -0,0 +1,585 @@ +menu "Command line interface" + +config HUSH_PARSER + bool "Use hush shell" + select SYS_HUSH_PARSER + help + This option enables the "hush" shell (from Busybox) as command line + interpreter, thus enabling powerful command line syntax like + if...then...else...fi conditionals or `&&' and '||' + constructs ("shell scripts"). + + If disabled, you get the old, much simpler behaviour with a somewhat + smaller memory footprint. + +config SYS_HUSH_PARSER + bool + help + Backward compatibility. + +config SYS_PROMPT + string "Shell prompt" + default "=> " + help + This string is displayed in the command line to the left of the + cursor. + +menu "Autoboot options" + +config AUTOBOOT_KEYED + bool "Stop autobooting via specific input key / string" + default n + help + This option enables stopping (aborting) of the automatic + boot feature only by issuing a specific input key or + string. If not enabled, any input key will abort the + U-Boot automatic booting process and bring the device + to the U-Boot prompt for user input. + +config AUTOBOOT_PROMPT + string "Autoboot stop prompt" + depends on AUTOBOOT_KEYED + default "Autoboot in %d seconds\\n" + help + This string is displayed before the boot delay selected by + CONFIG_BOOTDELAY starts. If it is not defined there is no + output indicating that autoboot is in progress. + + Note that this define is used as the (only) argument to a + printf() call, so it may contain '%' format specifications, + provided that it also includes, sepearated by commas exactly + like in a printf statement, the required arguments. It is + the responsibility of the user to select only such arguments + that are valid in the given context. + +config AUTOBOOT_ENCRYPTION + bool "Enable encryption in autoboot stopping" + depends on AUTOBOOT_KEYED + default n + +config AUTOBOOT_DELAY_STR + string "Delay autobooting via specific input key / string" + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION + help + This option delays the automatic boot feature by issuing + a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR + or the environment variable "bootdelaykey" is specified + and this string is received from console input before + autoboot starts booting, U-Boot gives a command prompt. The + U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is + used, otherwise it never times out. + +config AUTOBOOT_STOP_STR + string "Stop autobooting via specific input key / string" + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION + help + This option enables stopping (aborting) of the automatic + boot feature only by issuing a specific input key or + string. If CONFIG_AUTOBOOT_STOP_STR or the environment + variable "bootstopkey" is specified and this string is + received from console input before autoboot starts booting, + U-Boot gives a command prompt. The U-Boot prompt never + times out, even if CONFIG_BOOT_RETRY_TIME is used. + +config AUTOBOOT_KEYED_CTRLC + bool "Enable Ctrl-C autoboot interruption" + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION + default n + help + This option allows for the boot sequence to be interrupted + by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". + Setting this variable provides an escape sequence from the + limited "password" strings. + +config AUTOBOOT_STOP_STR_SHA256 + string "Stop autobooting via SHA256 encrypted password" + depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION + help + This option adds the feature to only stop the autobooting, + and therefore boot into the U-Boot prompt, when the input + string / password matches a values that is encypted via + a SHA256 hash and saved in the environment. + +endmenu + +comment "Commands" + +menu "Info commands" + +config CMD_BDI + bool "bdinfo" + default y + help + Print board info + +config CMD_CONSOLE + bool "coninfo" + default y + help + Print console devices and information. + +config CMD_CPU + bool "cpu" + help + Print information about available CPUs. This normally shows the + number of CPUs, type (e.g. manufacturer, architecture, product or + internal name) and clock frequency. Other information may be + available depending on the CPU driver. + +config CMD_LICENSE + bool "license" + help + Print GPL license text + +endmenu + +menu "Boot commands" + +config CMD_BOOTD + bool "bootd" + default y + help + Run the command stored in the environment "bootcmd", i.e. + "bootd" does the same thing as "run bootcmd". + +config CMD_BOOTM + bool "bootm" + default y + help + Boot an application image from the memory. + +config CMD_ELF + bool "bootelf, bootvx" + default y + help + Boot an ELF/vxWorks image from the memory. + +config CMD_GO + bool "go" + default y + help + Start an application at a given address. + +config CMD_RUN + bool "run" + default y + help + Run the command in the given environment variable. + +config CMD_IMI + bool "iminfo" + default y + help + Print header information for application image. + +config CMD_IMLS + bool "imls" + default y + help + List all images found in flash + +config CMD_XIMG + bool "imxtract" + default y + help + Extract a part of a multi-image. + +config CMD_POWEROFF + bool + +endmenu + +menu "Environment commands" + +config CMD_EXPORTENV + bool "env export" + default y + help + Export environments. + +config CMD_IMPORTENV + bool "env import" + default y + help + Import environments. + +config CMD_EDITENV + bool "editenv" + default y + help + Edit environment variable. + +config CMD_SAVEENV + bool "saveenv" + default y + help + Save all environment variables into the compiled-in persistent + storage. + +config CMD_ENV_EXISTS + bool "env exists" + default y + help + Check if a variable is defined in the environment for use in + shell scripting. + +endmenu + +menu "Memory commands" + +config CMD_MEMORY + bool "md, mm, nm, mw, cp, cmp, base, loop" + default y + help + Memeory commands. + md - memory display + mm - memory modify (auto-incrementing address) + nm - memory modify (constant address) + mw - memory write (fill) + cp - memory copy + cmp - memory compare + base - print or set address offset + loop - initinite loop on address range + +config CMD_CRC32 + bool "crc32" + default y + help + Compute CRC32. + +config LOOPW + bool "loopw" + help + Infinite write loop on address range + +config CMD_MEMTEST + bool "memtest" + help + Simple RAM read/write test. + +config CMD_MX_CYCLIC + bool "mdc, mwc" + help + mdc - memory display cyclic + mwc - memory write cyclic + +config CMD_MEMINFO + bool "meminfo" + help + Display memory information. + +endmenu + +menu "Device access commands" + +config CMD_DM + bool "dm - Access to driver model information" + depends on DM + default y + help + Provides access to driver model data structures and information, + such as a list of devices, list of uclasses and the state of each + device (e.g. activated). This is not required for operation, but + can be useful to see the state of driver model for debugging or + interest. + +config CMD_DEMO + bool "demo - Demonstration commands for driver model" + depends on DM + help + Provides a 'demo' command which can be used to play around with + driver model. To use this properly you will need to enable one or + both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). + Otherwise you will always get an empty list of devices. The demo + devices are defined in the sandbox device tree, so the easiest + option is to use sandbox and pass the -d point to sandbox's + u-boot.dtb file. + +config CMD_LOADB + bool "loadb" + default y + help + Load a binary file over serial line. + +config CMD_LOADS + bool "loads" + default y + help + Load an S-Record file over serial line + +config CMD_FLASH + bool "flinfo, erase, protect" + default y + help + NOR flash support. + flinfo - print FLASH memory information + erase - FLASH memory + protect - enable or disable FLASH write protection + +config CMD_ARMFLASH + depends on FLASH_CFI_DRIVER + bool "armflash" + help + ARM Ltd reference designs flash partition access + +config CMD_NAND + bool "nand" + help + NAND support. + +config CMD_SF + bool "sf" + help + SPI Flash support + +config CMD_SPI + bool "sspi" + help + SPI utility command. + +config CMD_I2C + bool "i2c" + help + I2C support. + +config CMD_USB + bool "usb" + help + USB support. + +config CMD_FPGA + bool "fpga" + default y + help + FPGA support. + +config CMD_REMOTEPROC + bool "remoteproc" + depends on REMOTEPROC + help + Support for Remote Processor control + +config CMD_GPIO + bool "gpio" + help + GPIO support. + +endmenu + + +menu "Shell scripting commands" + +config CMD_ECHO + bool "echo" + default y + help + Echo args to console + +config CMD_ITEST + bool "itest" + default y + help + Return true/false on integer compare. + +config CMD_SOURCE + bool "source" + default y + help + Run script from memory + +config CMD_SETEXPR + bool "setexpr" + default y + help + Evaluate boolean and math expressions and store the result in an env + variable. + Also supports loading the value at a memory location into a variable. + If CONFIG_REGEX is enabled, setexpr also supports a gsub function. + +endmenu + +menu "Network commands" + +config CMD_NET + bool "bootp, tftpboot" + select NET + default y + help + Network commands. + bootp - boot image via network using BOOTP/TFTP protocol + tftpboot - boot image via network using TFTP protocol + +config CMD_TFTPPUT + bool "tftp put" + help + TFTP put command, for uploading files to a server + +config CMD_TFTPSRV + bool "tftpsrv" + help + Act as a TFTP server and boot the first received file + +config CMD_RARP + bool "rarpboot" + help + Boot image via network using RARP/TFTP protocol + +config CMD_DHCP + bool "dhcp" + help + Boot image via network using DHCP/TFTP protocol + +config CMD_NFS + bool "nfs" + default y + help + Boot image via network using NFS protocol. + +config CMD_PING + bool "ping" + help + Send ICMP ECHO_REQUEST to network host + +config CMD_CDP + bool "cdp" + help + Perform CDP network configuration + +config CMD_SNTP + bool "sntp" + help + Synchronize RTC via network + +config CMD_DNS + bool "dns" + help + Lookup the IP of a hostname + +config CMD_LINK_LOCAL + bool "linklocal" + help + Acquire a network IP address using the link-local protocol + +endmenu + +menu "Misc commands" + +config CMD_AMBAPP + bool "ambapp" + depends on LEON3 + default y + help + Lists AMBA Plug-n-Play information. + +config SYS_AMBAPP_PRINT_ON_STARTUP + bool "Show AMBA PnP info on startup" + depends on CMD_AMBAPP + default n + help + Show AMBA Plug-n-Play information on startup. + +config CMD_TIME + bool "time" + help + Run commands and summarize execution time. + +# TODO: rename to CMD_SLEEP +config CMD_MISC + bool "sleep" + default y + help + Delay execution for some time + +config CMD_TIMER + bool "timer" + help + Access the system timer. + +config CMD_SETGETDCR + bool "getdcr, setdcr, getidcr, setidcr" + depends on 4xx + default y + help + getdcr - Get an AMCC PPC 4xx DCR's value + setdcr - Set an AMCC PPC 4xx DCR's value + getidcr - Get a register value via indirect DCR addressing + setidcr - Set a register value via indirect DCR addressing + +config CMD_SOUND + bool "sound" + depends on SOUND + help + This provides basic access to the U-Boot's sound support. The main + feature is to play a beep. + + sound init - set up sound system + sound play - play a sound + +endmenu + +config CMD_BOOTSTAGE + bool "Enable the 'bootstage' command" + depends on BOOTSTAGE + help + Add a 'bootstage' command which supports printing a report + and un/stashing of bootstage data. + +menu "Power commands" +config CMD_PMIC + bool "Enable Driver Model PMIC command" + depends on DM_PMIC + help + This is the pmic command, based on a driver model pmic's API. + Command features are unchanged: + - list - list pmic devices + - pmic dev <id> - show or [set] operating pmic device (NEW) + - pmic dump - dump registers + - pmic read address - read byte of register at address + - pmic write address - write byte to register at address + The only one change for this command is 'dev' subcommand. + +config CMD_REGULATOR + bool "Enable Driver Model REGULATOR command" + depends on DM_REGULATOR + help + This command is based on driver model regulator's API. + User interface features: + - list - list regulator devices + - regulator dev <id> - show or [set] operating regulator device + - regulator info - print constraints info + - regulator status - print operating status + - regulator value <val] <-f> - print/[set] voltage value [uV] + - regulator current <val> - print/[set] current value [uA] + - regulator mode <id> - print/[set] operating mode id + - regulator enable - enable the regulator output + - regulator disable - disable the regulator output + + The '-f' (force) option can be used for set the value which exceeds + the limits, which are found in device-tree and are kept in regulator's + uclass platdata structure. + +endmenu + +menu "Security commands" +config CMD_TPM + bool "Enable the 'tpm' command" + depends on TPM + help + This provides a means to talk to a TPM from the command line. A wide + range of commands if provided - see 'tpm help' for details. The + command requires a suitable TPM on your board and the correct driver + must be enabled. + +config CMD_TPM_TEST + bool "Enable the 'tpm test' command" + depends on CMD_TPM + help + This provides a a series of tests to confirm that the TPM is working + correctly. The tests cover initialisation, non-volatile RAM, extend, + global lock and checking that timing is within expectations. The + tests pass correctly on Infineon TPMs but may need to be adjusted + for other devices. + +endmenu + +endmenu |