diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/mx7dsabresd/imximage.cfg | 11 | ||||
| -rw-r--r-- | board/freescale/mx7dsabresd/imximage_TO_1_1.cfg | 122 | ||||
| -rw-r--r-- | board/freescale/mx7dsabresd/plugin.S | 227 |
3 files changed, 360 insertions, 0 deletions
diff --git a/board/freescale/mx7dsabresd/imximage.cfg b/board/freescale/mx7dsabresd/imximage.cfg index c2b3a8c..4dca2d3 100644 --- a/board/freescale/mx7dsabresd/imximage.cfg +++ b/board/freescale/mx7dsabresd/imximage.cfg @@ -1,5 +1,6 @@ /* * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * SPDX-License-Identifier: GPL-2.0+ * @@ -22,6 +23,10 @@ IMAGE_VERSION 2 BOOT_FROM sd +#ifdef CONFIG_USE_IMXIMG_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/freescale/mx7dsabresd/plugin.bin 0x00910000 +#else /* * Secure boot support */ @@ -42,6 +47,9 @@ CSF CONFIG_CSF_SIZE */ DATA 4 0x30340004 0x4F400005 +/* Clear then set bit30 to ensure exit from DDR retention */ +DATA 4 0x30360388 0x40000000 +DATA 4 0x30360384 0x40000000 DATA 4 0x30391000 0x00000002 DATA 4 0x307a0000 0x01040001 @@ -93,9 +101,12 @@ CHECK_BITS_SET 4 0x307900c4 0x1 DATA 4 0x307900c0 0x0e447304 DATA 4 0x307900c0 0x0e407304 + DATA 4 0x30384130 0x00000000 DATA 4 0x30340020 0x00000178 DATA 4 0x30384130 0x00000002 DATA 4 0x30790018 0x0000000f CHECK_BITS_SET 4 0x307a0004 0x1 + +#endif diff --git a/board/freescale/mx7dsabresd/imximage_TO_1_1.cfg b/board/freescale/mx7dsabresd/imximage_TO_1_1.cfg new file mode 100644 index 0000000..66cc99c --- /dev/null +++ b/board/freescale/mx7dsabresd/imximage_TO_1_1.cfg @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2014-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include <config.h> + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +BOOT_FROM sd + +#ifdef CONFIG_USE_IMXIMG_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/freescale/mx7dsabresd/plugin.bin 0x00910000 +#else + +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +DATA 4 0x30360070 0x00703021 +DATA 4 0x30360090 0x0 +DATA 4 0x30360070 0x00603021 +CHECK_BITS_SET 4 0x30360070 0x80000000 +DATA 4 0x30389880 0x1 + +DATA 4 0x30340004 0x4F400005 +/* Clear then set bit30 to ensure exit from DDR retention */ +DATA 4 0x30360388 0x40000000 +DATA 4 0x30360384 0x40000000 + +DATA 4 0x30391000 0x00000002 +DATA 4 0x307a0000 0x01040001 +DATA 4 0x307a01a0 0x80400003 +DATA 4 0x307a01a4 0x00100020 +DATA 4 0x307a01a8 0x80100004 +DATA 4 0x307a0064 0x00400046 +DATA 4 0x307a0490 0x00000001 +DATA 4 0x307a00d0 0x00020083 +DATA 4 0x307a00d4 0x00690000 +DATA 4 0x307a00dc 0x09300004 +DATA 4 0x307a00e0 0x04080000 +DATA 4 0x307a00e4 0x00100004 +DATA 4 0x307a00f4 0x0000033f +DATA 4 0x307a0100 0x09081109 +DATA 4 0x307a0104 0x0007020d +DATA 4 0x307a0108 0x03040407 +DATA 4 0x307a010c 0x00002006 +DATA 4 0x307a0110 0x04020205 +DATA 4 0x307a0114 0x03030202 +DATA 4 0x307a0120 0x00000803 +DATA 4 0x307a0180 0x00800020 +DATA 4 0x307a0184 0x02000100 +DATA 4 0x307a0190 0x02098204 +DATA 4 0x307a0194 0x00030303 +DATA 4 0x307a0200 0x00000016 +DATA 4 0x307a0204 0x00171717 +DATA 4 0x307a0214 0x04040404 +DATA 4 0x307a0218 0x0f040404 +DATA 4 0x307a0240 0x06000604 +DATA 4 0x307a0244 0x00000001 +DATA 4 0x30391000 0x00000000 +DATA 4 0x30790000 0x17420f40 +DATA 4 0x30790004 0x10210100 +DATA 4 0x30790010 0x00060807 +DATA 4 0x307900b0 0x1010007e +DATA 4 0x3079009c 0x00000dee +DATA 4 0x3079007c 0x18181818 +DATA 4 0x30790080 0x18181818 +DATA 4 0x30790084 0x40401818 +DATA 4 0x30790088 0x00000040 +DATA 4 0x3079006c 0x40404040 +DATA 4 0x30790020 0x08080808 +DATA 4 0x30790030 0x08080808 +DATA 4 0x30790050 0x01000010 +DATA 4 0x30790050 0x00000010 + +DATA 4 0x307900c0 0x0e407304 +DATA 4 0x307900c0 0x0e447304 +DATA 4 0x307900c0 0x0e447306 + +CHECK_BITS_SET 4 0x307900c4 0x1 + +DATA 4 0x307900c0 0x0e447304 +DATA 4 0x307900c0 0x0e407304 + + +DATA 4 0x30384130 0x00000000 +DATA 4 0x30340020 0x00000178 +DATA 4 0x30384130 0x00000002 +DATA 4 0x30790018 0x0000000f + +CHECK_BITS_SET 4 0x307a0004 0x1 + +#endif diff --git a/board/freescale/mx7dsabresd/plugin.S b/board/freescale/mx7dsabresd/plugin.S new file mode 100644 index 0000000..2dce883 --- /dev/null +++ b/board/freescale/mx7dsabresd/plugin.S @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2014-2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> + +/* DDR script */ +.macro imx7d_ddrphy_latency_setting + ldr r2, =ANATOP_BASE_ADDR + ldr r3, [r2, #0x800] + and r3, r3, #0xFF + cmp r3, #0x11 + bne NO_DELAY + + /*TO 1.1*/ + ldr r1, =0x00000dee + str r1, [r0, #0x9c] + ldr r1, =0x18181818 + str r1, [r0, #0x7c] + ldr r1, =0x18181818 + str r1, [r0, #0x80] + ldr r1, =0x40401818 + str r1, [r0, #0x84] + ldr r1, =0x00000040 + str r1, [r0, #0x88] + ldr r1, =0x40404040 + str r1, [r0, #0x6c] + b TUNE_END + +NO_DELAY: + /*TO 1.0*/ + ldr r1, =0x00000d6e + str r1, [r0, #0x9c] + +TUNE_END: +.endm + +.macro imx7d_ddr_freq_setting + ldr r2, =ANATOP_BASE_ADDR + ldr r3, [r2, #0x800] + and r3, r3, #0xFF + cmp r3, #0x11 + bne FREQ_DEFAULT_533 + + /* Change to 400Mhz for TO1.1 */ + ldr r0, =ANATOP_BASE_ADDR + ldr r1, =0x70 + ldr r2, =0x00703021 + str r2, [r0, r1] + ldr r1, =0x90 + ldr r2, =0x0 + str r2, [r0, r1] + ldr r1, =0x70 + ldr r2, =0x00603021 + str r2, [r0, r1] + + ldr r3, =0x80000000 +wait_lock: + ldr r2, [r0, r1] + and r2, r3 + cmp r2, r3 + bne wait_lock + + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x9880 + ldr r2, =0x1 + str r2, [r0, r1] + +FREQ_DEFAULT_533: +.endm + +.macro imx7d_sabresd_ddr_setting + imx7d_ddr_freq_setting + + /* Configure ocram_epdc */ + ldr r0, =IOMUXC_GPR_BASE_ADDR + ldr r1, =0x4f400005 + str r1, [r0, #0x4] + + /* clear/set bit30 of SNVS_MISC_CTRL to ensure exit from ddr retention */ + ldr r0, =ANATOP_BASE_ADDR + ldr r1, =(0x1 << 30) + str r1, [r0, #0x388] + str r1, [r0, #0x384] + + ldr r0, =SRC_BASE_ADDR + ldr r1, =0x2 + ldr r2, =0x1000 + str r1, [r0, r2] + + ldr r0, =DDRC_IPS_BASE_ADDR + ldr r1, =0x01040001 + str r1, [r0] + ldr r1, =0x80400003 + str r1, [r0, #0x1a0] + ldr r1, =0x00100020 + str r1, [r0, #0x1a4] + ldr r1, =0x80100004 + str r1, [r0, #0x1a8] + ldr r1, =0x00400046 + str r1, [r0, #0x64] + ldr r1, =0x1 + str r1, [r0, #0x490] + ldr r1, =0x00020001 + str r1, [r0, #0xd0] + ldr r1, =0x00690000 + str r1, [r0, #0xd4] + ldr r1, =0x09300004 + str r1, [r0, #0xdc] + ldr r1, =0x04080000 + str r1, [r0, #0xe0] + ldr r1, =0x00100004 + str r1, [r0, #0xe4] + ldr r1, =0x33f + str r1, [r0, #0xf4] + ldr r1, =0x09081109 + str r1, [r0, #0x100] + ldr r1, =0x0007020d + str r1, [r0, #0x104] + ldr r1, =0x03040407 + str r1, [r0, #0x108] + ldr r1, =0x00002006 + str r1, [r0, #0x10c] + ldr r1, =0x04020205 + str r1, [r0, #0x110] + ldr r1, =0x03030202 + str r1, [r0, #0x114] + ldr r1, =0x00000803 + str r1, [r0, #0x120] + ldr r1, =0x00800020 + str r1, [r0, #0x180] + ldr r1, =0x02000100 + str r1, [r0, #0x184] + ldr r1, =0x02098204 + str r1, [r0, #0x190] + ldr r1, =0x00030303 + str r1, [r0, #0x194] + + ldr r1, =0x00000016 + str r1, [r0, #0x200] + ldr r1, =0x00171717 + str r1, [r0, #0x204] + ldr r1, =0x04040404 + str r1, [r0, #0x214] + ldr r1, =0x0f040404 + str r1, [r0, #0x218] + + ldr r1, =0x06000604 + str r1, [r0, #0x240] + ldr r1, =0x00000001 + str r1, [r0, #0x244] + + ldr r0, =SRC_BASE_ADDR + mov r1, #0x0 + ldr r2, =0x1000 + str r1, [r0, r2] + + ldr r0, =DDRPHY_IPS_BASE_ADDR + ldr r1, =0x17420f40 + str r1, [r0] + ldr r1, =0x10210100 + str r1, [r0, #0x4] + ldr r1, =0x00060807 + str r1, [r0, #0x10] + ldr r1, =0x1010007e + str r1, [r0, #0xb0] + imx7d_ddrphy_latency_setting + ldr r1, =0x08080808 + str r1, [r0, #0x20] + ldr r1, =0x08080808 + str r1, [r0, #0x30] + ldr r1, =0x01000010 + str r1, [r0, #0x50] + + ldr r1, =0x0e407304 + str r1, [r0, #0xc0] + ldr r1, =0x0e447304 + str r1, [r0, #0xc0] + ldr r1, =0x0e447306 + str r1, [r0, #0xc0] + +wait_zq: + ldr r1, [r0, #0xc4] + tst r1, #0x1 + beq wait_zq + + ldr r1, =0x0e447304 + str r1, [r0, #0xc0] + ldr r1, =0x0e407304 + str r1, [r0, #0xc0] + + ldr r0, =CCM_BASE_ADDR + mov r1, #0x0 + ldr r2, =0x4130 + str r1, [r0, r2] + ldr r0, =IOMUXC_GPR_BASE_ADDR + mov r1, #0x178 + str r1, [r0, #0x20] + ldr r0, =CCM_BASE_ADDR + mov r1, #0x2 + ldr r2, =0x4130 + str r1, [r0, r2] + ldr r0, =DDRPHY_IPS_BASE_ADDR + ldr r1, =0x0000000f + str r1, [r0, #0x18] + + ldr r0, =DDRC_IPS_BASE_ADDR +wait_stat: + ldr r1, [r0, #0x4] + tst r1, #0x1 + beq wait_stat +.endm + +.macro imx7_clock_gating +.endm + +.macro imx7_qos_setting +.endm + +.macro imx7_ddr_setting + imx7d_sabresd_ddr_setting +.endm + +/* include the common plugin code here */ +#include <asm/arch/mx7_plugin.S> |