diff options
Diffstat (limited to 'board')
160 files changed, 1360 insertions, 4750 deletions
diff --git a/board/actux1/Makefile b/board/actux1/Makefile deleted file mode 100644 index 05a8669..0000000 --- a/board/actux1/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := actux1.o diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c deleted file mode 100644 index 03ccd93..0000000 --- a/board/actux1/actux1.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <miiphy.h> -#ifdef CONFIG_PCI -#include <pci.h> -#include <asm/arch/ixp425pci.h> -#endif - -#include "actux1_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* CS5: Debug port */ - writel(0x9d520003, IXP425_EXP_CS5); - /* CS6: HwRel */ - writel(0x81860001, IXP425_EXP_CS6); - /* CS7: LEDs */ - writel(0x80900003, IXP425_EXP_CS7); - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); - - /* Setup GPIOs for PCI INTA */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI1_INTA); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI1_INTA); - - /* Setup GPIOs for 33MHz clock output */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - writel(0x011001FF, IXP425_GPIO_GPCLKR); - - udelay(533); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - - ACTUX1_LED1(2); - ACTUX1_LED2(2); - ACTUX1_LED3(0); - ACTUX1_LED4(0); - ACTUX1_LED5(0); - ACTUX1_LED6(0); - ACTUX1_LED7(0); - - ACTUX1_HS(ACTUX1_HS_DCD); - - return 0; -} - -/* - * Check Board Identity - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: AcTux-1 rev."); - putc(ACTUX1_BOARDREL + 'A' - 1); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * 0 = reserved - * 1 = Rev. A - * 2 = Rev. B - *************************************************************************/ -u32 get_board_rev(void) -{ - return ACTUX1_BOARDREL; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - - -#ifdef CONFIG_PCI -struct pci_controller hose; - -void pci_init_board(void) -{ - pci_ixp_init(&hose); -} -#endif - -void reset_phy(void) -{ - u16 id1, id2; - - /* initialize the PHY */ - miiphy_reset("NPE0", CONFIG_PHY_ADDR); - - miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID1, &id1); - miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID2, &id2); - - id2 &= 0xFFF0; /* mask out revision bits */ - - if (id1 == 0x13 && id2 == 0x78e0) { - /* - * LXT971/LXT972 PHY: set LED outputs: - * LED1(green) = Link/ACT, - * LED2 (unused) = LINK, - * LED3(red) = Coll - */ - miiphy_write("NPE0", CONFIG_PHY_ADDR, 20, 0xD432); - } else if (id1 == 0x143 && id2 == 0xbc30) { - /* BCM5241: default values are OK */ - } else - printf("unknown ethernet PHY ID: %x %x\n", id1, id2); -} diff --git a/board/actux1/actux1_hw.h b/board/actux1/actux1_hw.h deleted file mode 100644 index 5627f24..0000000 --- a/board/actux1/actux1_hw.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the AcTux-1 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ACTUX1_HW_H -#define _ACTUX1_HW_H - -/* 0 = LED off,1 = green, 2 = red, 3 = orange */ -#define ACTUX1_LED1(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) -#define ACTUX1_LED2(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) -#define ACTUX1_LED3(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) -#define ACTUX1_LED4(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 3) -#define ACTUX1_LED5(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 4) -#define ACTUX1_LED6(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 5) -#define ACTUX1_LED7(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 6) -#define ACTUX1_HS(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7) -#define ACTUX1_HS_DCD 0x01 -#define ACTUX1_HS_DSR 0x02 - -#define ACTUX1_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS -#define ACTUX1_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) - -/* GPIO settings */ -#define CONFIG_SYS_GPIO_PCI1_INTA 2 -#define CONFIG_SYS_GPIO_PCI2_INTA 3 -#define CONFIG_SYS_GPIO_I2C_SDA 4 -#define CONFIG_SYS_GPIO_I2C_SCL 5 -#define CONFIG_SYS_GPIO_DBGJUMPER 9 -#define CONFIG_SYS_GPIO_BUTTON1 10 -#define CONFIG_SYS_GPIO_DBGSENSE 11 -#define CONFIG_SYS_GPIO_DTR 12 -#define CONFIG_SYS_GPIO_IORST 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#endif diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds deleted file mode 100644 index 4716e4f..0000000 --- a/board/actux1/u-boot.lds +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") -OUTPUT_ARCH (arm) -ENTRY (_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN (4); - .text : { - *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) - net/built-in.o(.text*) - board/actux1/built-in.o(.text*) - arch/arm/cpu/ixp/built-in.o(.text*) - drivers/input/built-in.o(.text*) - - . = env_offset; - common/env_embedded.o(.ppcenv) - *(.text*) - } - - . = ALIGN(4); - .rodata : { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - . = ALIGN(4); - .data : { - *(.data*) - } - . = ALIGN(4); - .got : { - *(.got) - } - . =.; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN (4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - _end = .; - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/actux2/Makefile b/board/actux2/Makefile deleted file mode 100644 index 24cbff1..0000000 --- a/board/actux2/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := actux2.o diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c deleted file mode 100644 index e578cd0..0000000 --- a/board/actux2/actux2.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> - -#include <miiphy.h> - -#include "actux2_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* CS1: IPAC-X */ - writel(0x94d10013, IXP425_EXP_CS1); - /* CS5: Debug port */ - writel(0x9d520003, IXP425_EXP_CS5); - /* CS6: HW release register */ - writel(0x81860001, IXP425_EXP_CS6); - /* CS7: LEDs */ - writel(0x80900003, IXP425_EXP_CS7); - - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD); - - /* Setup GPIOs for Interrupt inputs */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT); - - /* Setup GPIOs for 33MHz clock output */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - writel(0x011001FF, IXP425_GPIO_GPCLKR); - - udelay(533); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST); - - ACTUX2_LED1(1); - ACTUX2_LED2(0); - ACTUX2_LED3(0); - ACTUX2_LED4(0); - - return 0; -} - -/* - * Check Board Identity - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: AcTux-2 rev."); - putc(ACTUX2_BOARDREL + 'A' - 1); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * 0 = reserved - * 1 = Rev. A - * 2 = Rev. B - *************************************************************************/ -u32 get_board_rev(void) -{ - return ACTUX2_BOARDREL; -} - -void reset_phy(void) -{ - /* init IcPlus IP175C ethernet switch to native IP175C mode */ - miiphy_write("NPE0", 29, 31, 0x175C); -} diff --git a/board/actux2/actux2_hw.h b/board/actux2/actux2_hw.h deleted file mode 100644 index 57c6fa7..0000000 --- a/board/actux2/actux2_hw.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the AcTux-2 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ACTUX2_HW_H -#define _ACTUX2_HW_H - -/* 0 = LED off,1 = green, 2 = red, 3 = orange */ -#define ACTUX2_LED1(a) writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) -#define ACTUX2_LED2(a) writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) -#define ACTUX2_LED3(a) writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) -#define ACTUX2_LED4(a) writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 3) - -#define ACTUX2_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS -#define ACTUX2_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) -#define ACTUX2_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0) - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPIO_DBGINT 0 -#define CONFIG_SYS_GPIO_ETHINT 1 -#define CONFIG_SYS_GPIO_ETHRST 2 /* Out */ -#define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */ -#define CONFIG_SYS_GPIO_UNUSED4 4 -#define CONFIG_SYS_GPIO_UNUSED5 5 -#define CONFIG_SYS_GPIO_DSR 6 /* Out */ -#define CONFIG_SYS_GPIO_DCD 7 /* Out */ -#define CONFIG_SYS_GPIO_IPAC_INT 8 -#define CONFIG_SYS_GPIO_DBGJUMPER 9 -#define CONFIG_SYS_GPIO_BUTTON1 10 -#define CONFIG_SYS_GPIO_DBGSENSE 11 -#define CONFIG_SYS_GPIO_DTR 12 -#define CONFIG_SYS_GPIO_IORST 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#endif diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds deleted file mode 100644 index f00d7c7..0000000 --- a/board/actux2/u-boot.lds +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") -OUTPUT_ARCH (arm) -ENTRY (_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN (4); - .text : { - *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) - net/built-in.o(.text*) - board/actux2/built-in.o(.text*) - arch/arm/cpu/ixp/built-in.o(.text*) - drivers/input/built-in.o(.text*) - - . = env_offset; - common/env_embedded.o(.ppcenv) - *(.text*) - } - - . = ALIGN(4); - .rodata : { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - . = ALIGN(4); - .data : { - *(.data*) - } - . = ALIGN(4); - .got : { - *(.got) - } - . =.; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN (4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - _end = .; - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/actux3/Makefile b/board/actux3/Makefile deleted file mode 100644 index f628f26..0000000 --- a/board/actux3/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := actux3.o diff --git a/board/actux3/actux3.c b/board/actux3/actux3.c deleted file mode 100644 index 09c803c..0000000 --- a/board/actux3/actux3.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <miiphy.h> -#include "actux3_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* CS1: IPAC-X */ - writel(0x94d10013, IXP425_EXP_CS1); - /* CS5: Debug port */ - writel(0x9d520003, IXP425_EXP_CS5); - /* CS6: Release/Option register */ - writel(0x81860001, IXP425_EXP_CS6); - /* CS7: LEDs */ - writel(0x80900003, IXP425_EXP_CS7); - - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED5_GN); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED6_RT); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED6_GN); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED5_GN); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED6_RT); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED6_GN); - - /* - * Setup GPIO's for Interrupt inputs - */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT); - - /* - * Setup GPIO's for 33MHz clock output - */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - writel(0x011001FF, IXP425_GPIO_GPCLKR); - - /* we need a minimum PCI reset pulse width after enabling the clock */ - udelay(533); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST); - - ACTUX3_LED1_RT(1); - ACTUX3_LED1_GN(0); - ACTUX3_LED2_RT(0); - ACTUX3_LED2_GN(0); - ACTUX3_LED3_RT(0); - ACTUX3_LED3_GN(0); - ACTUX3_LED4_GN(0); - ACTUX3_LED5_RT(0); - - return 0; -} - -/* - * Check Board Identity - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: AcTux-3 rev."); - putc(ACTUX3_BOARDREL + 'A' - 1); - - if (i > 0) { - puts (", serial# "); - puts (buf); - } - putc('\n'); - - return 0; -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * 0 = reserved - * 1 = Rev. A - * 2 = Rev. B - *************************************************************************/ -u32 get_board_rev(void) -{ - return ACTUX3_BOARDREL; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - -void reset_phy(void) -{ - int i; - - /* initialize the PHY */ - miiphy_reset("NPE0", CONFIG_PHY_ADDR); - - /* all LED outputs = Link/Act */ - miiphy_write("NPE0", CONFIG_PHY_ADDR, 0x16, 0x0AAA); - - /* - * The Marvell 88E6060 switch comes up with all ports disabled. - * set all ethernet switch ports to forwarding state - */ - for (i = 1; i <= 5; i++) - miiphy_write("NPE0", CONFIG_PHY_ADDR + 8 + i, 0x04, 0x03); - -} diff --git a/board/actux3/actux3_hw.h b/board/actux3/actux3_hw.h deleted file mode 100644 index f8acb4d..0000000 --- a/board/actux3/actux3_hw.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the AcTux-3 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ACTUX3_HW_H -#define _ACTUX3_HW_H - -/* 0 = LED off,1 = ON */ -#define ACTUX3_LED1_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) -#define ACTUX3_LED1_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) -#define ACTUX3_LED2_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) -#define ACTUX3_LED2_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 3) -#define ACTUX3_LED3_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 4) -#define ACTUX3_LED3_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 5) -#define ACTUX3_LED4_GN(a) writeb((a)^1, IXP425_EXP_BUS_CS7_BASE_PHYS + 6) -#define ACTUX3_LED5_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7) - -#define ACTUX3_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS -#define ACTUX3_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) -#define ACTUX3_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0) - -/* GPIO settings */ -#define CONFIG_SYS_GPIO_DBGINT 0 -#define CONFIG_SYS_GPIO_ETHINT 1 -#define CONFIG_SYS_GPIO_ETHRST 2 /* Out */ -#define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */ -#define CONFIG_SYS_GPIO_LED6_RT 4 /* Out */ -#define CONFIG_SYS_GPIO_LED6_GN 5 /* Out */ -#define CONFIG_SYS_GPIO_DSR 6 /* Out */ -#define CONFIG_SYS_GPIO_DCD 7 /* Out */ -#define CONFIG_SYS_GPIO_DBGJUMPER 9 -#define CONFIG_SYS_GPIO_BUTTON1 10 -#define CONFIG_SYS_GPIO_DBGSENSE 11 -#define CONFIG_SYS_GPIO_DTR 12 -#define CONFIG_SYS_GPIO_IORST 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#endif diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds deleted file mode 100644 index 2de3ca6..0000000 --- a/board/actux3/u-boot.lds +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") -OUTPUT_ARCH (arm) -ENTRY (_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN (4); - .text : { - *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) - net/built-in.o(.text*) - board/actux3/built-in.o(.text*) - arch/arm/cpu/ixp/built-in.o(.text*) - drivers/input/built-in.o(.text*) - - . = env_offset; - common/env_embedded.o(.ppcenv) - *(.text*) - } - - . = ALIGN(4); - .rodata : { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - . = ALIGN(4); - .data : { - *(.data*) - } - . = ALIGN(4); - .got : { - *(.got) - } - . =.; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN (4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - _end = .; - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/actux4/Makefile b/board/actux4/Makefile deleted file mode 100644 index b949b60..0000000 --- a/board/actux4/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := actux4.o diff --git a/board/actux4/actux4.c b/board/actux4/actux4.c deleted file mode 100644 index 81c5458..0000000 --- a/board/actux4/actux4.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <miiphy.h> -#ifdef CONFIG_PCI -#include <pci.h> -#include <asm/arch/ixp425pci.h> -#endif - -#include "actux4_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - writel(0xbd113c42, IXP425_EXP_CS1); - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_nPWRON); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_nPWRON); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); - - /* led not populated on board*/ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED3); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED3); - - /* middle LED */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED2); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED2); - - /* right LED */ - /* weak pulldown = LED weak on */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_LED1); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED1); - - /* Setup GPIO's for Interrupt inputs */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTA); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTB); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTC); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RTCINT); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB); - - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTA); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTB); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTC); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RTCINT); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB); - - /* Setup GPIO's for 33MHz clock output */ - writel(0x011001FF, IXP425_GPIO_GPCLKR); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - - udelay(10000); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - udelay(10000); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - udelay(10000); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - - return 0; -} - -/* Check Board Identity */ -int checkboard(void) -{ - puts("Board: AcTux-4\n"); - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - -#ifdef CONFIG_PCI -struct pci_controller hose; - -void pci_init_board(void) -{ - pci_ixp_init(&hose); -} -#endif - -/* - * Hardcoded flash setup: - * Flash 0 is a non-CFI SST 39VF020 flash, 8 bit flash / 8 bit bus. - * Flash 1 is an Intel *16 flash using the CFI driver. - */ -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) -{ - if (banknum == 0) { /* non-CFI boot flash */ - info->portwidth = 1; - info->chipwidth = 1; - info->interface = FLASH_CFI_X8; - return 1; - } else - return 0; -} diff --git a/board/actux4/actux4_hw.h b/board/actux4/actux4_hw.h deleted file mode 100644 index b936376..0000000 --- a/board/actux4/actux4_hw.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the AcTux-4 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ACTUX4_HW_H -#define _ACTUX4_HW_H - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPIO_USBINTA 0 -#define CONFIG_SYS_GPIO_USBINTB 1 -#define CONFIG_SYS_GPIO_USBINTC 2 -#define CONFIG_SYS_GPIO_nPWRON 3 /* Out */ -#define CONFIG_SYS_GPIO_I2C_SCL 4 -#define CONFIG_SYS_GPIO_I2C_SDA 5 -#define CONFIG_SYS_GPIO_PCI_INTB 6 -#define CONFIG_SYS_GPIO_BUTTON1 7 -#define CONFIG_SYS_GPIO_LED1 8 /* Out */ -#define CONFIG_SYS_GPIO_RTCINT 9 -#define CONFIG_SYS_GPIO_LED2 10 /* Out */ -#define CONFIG_SYS_GPIO_PCI_INTA 11 -#define CONFIG_SYS_GPIO_IORST 12 /* Out */ -#define CONFIG_SYS_GPIO_LED3 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#endif diff --git a/board/ait/cam_enc_4xx/config.mk b/board/ait/cam_enc_4xx/config.mk index d7e7894..c7cfaca 100644 --- a/board/ait/cam_enc_4xx/config.mk +++ b/board/ait/cam_enc_4xx/config.mk @@ -9,7 +9,7 @@ UBL_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/ublimage.cfg ifndef CONFIG_SPL_BUILD -ALL-y += $(obj)u-boot.ubl +ALL-y += u-boot.ubl else # as SPL_TEXT_BASE is not page-aligned, we need for some # linkers the -n flag (Do not page align data), to prevent diff --git a/board/altera/socfpga/socfpga_cyclone5.c b/board/altera/socfpga/socfpga_cyclone5.c index 576066b..a960eb6 100644 --- a/board/altera/socfpga/socfpga_cyclone5.c +++ b/board/altera/socfpga/socfpga_cyclone5.c @@ -12,6 +12,7 @@ DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_DISPLAY_CPUINFO) /* * Print CPU information */ @@ -20,6 +21,7 @@ int print_cpuinfo(void) puts("CPU : Altera SOCFPGA Platform\n"); return 0; } +#endif /* * Print Board information diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c index 30a3b90..4e2d342 100644 --- a/board/armltd/versatile/versatile.c +++ b/board/armltd/versatile/versatile.c @@ -52,7 +52,11 @@ int board_early_init_f (void) int board_init (void) { /* arch number of Versatile Board */ +#ifdef CONFIG_ARCH_VERSATILE_AB + gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_AB; +#else gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_PB; +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = 0x00000100; diff --git a/board/avionic-design/dts/tegra20-medcom-wide.dts b/board/avionic-design/dts/tegra20-medcom-wide.dts deleted file mode 100644 index a9a07f9..0000000 --- a/board/avionic-design/dts/tegra20-medcom-wide.dts +++ /dev/null @@ -1,77 +0,0 @@ -/dts-v1/; - -#include "tegra20-tamonten.dtsi" - -/ { - model = "Avionic Design Medcom-Wide"; - compatible = "ad,medcom-wide", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x { - status = "okay"; - - dc@54200000 { - status = "okay"; - - rgb { - nvidia,panel = <&lcd_panel>; - status = "okay"; - }; - }; - }; - - serial@70006300 { - clock-frequency = <216000000>; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - lcd_panel: panel { - clock = <61715000>; - xres = <1366>; - yres = <768>; - left-margin = <2>; - right-margin = <47>; - hsync-len = <136>; - lower-margin = <21>; - upper-margin = <11>; - vsync-len = <4>; - - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 500000>; - nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,panel-timings = <0 0 0 0>; - }; -}; diff --git a/board/avionic-design/dts/tegra20-plutux.dts b/board/avionic-design/dts/tegra20-plutux.dts deleted file mode 100644 index 20016f2..0000000 --- a/board/avionic-design/dts/tegra20-plutux.dts +++ /dev/null @@ -1,45 +0,0 @@ -/dts-v1/; - -#include "tegra20-tamonten.dtsi" - -/ { - model = "Avionic Design Plutux"; - compatible = "ad,plutux", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - serial@70006300 { - clock-frequency = <216000000>; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; -}; diff --git a/board/avionic-design/dts/tegra20-tamonten.dtsi b/board/avionic-design/dts/tegra20-tamonten.dtsi deleted file mode 100644 index f379622..0000000 --- a/board/avionic-design/dts/tegra20-tamonten.dtsi +++ /dev/null @@ -1,500 +0,0 @@ -#include "tegra20.dtsi" - -/ { - model = "Avionic Design Tamonten SOM"; - compatible = "ad,tamonten", "nvidia,tegra20"; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x { - hdmi { - vdd-supply = <&hdmi_vdd_reg>; - pll-supply = <&hdmi_pll_reg>; - - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ - }; - }; - - pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ata { - nvidia,pins = "ata"; - nvidia,function = "ide"; - }; - atb { - nvidia,pins = "atb", "gma", "gme"; - nvidia,function = "sdio4"; - }; - atc { - nvidia,pins = "atc"; - nvidia,function = "nand"; - }; - atd { - nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", - "spia", "spib", "spic"; - nvidia,function = "gmi"; - }; - cdev1 { - nvidia,pins = "cdev1"; - nvidia,function = "plla_out"; - }; - cdev2 { - nvidia,pins = "cdev2"; - nvidia,function = "pllp_out4"; - }; - crtp { - nvidia,pins = "crtp"; - nvidia,function = "crt"; - }; - csus { - nvidia,pins = "csus"; - nvidia,function = "vi_sensor_clk"; - }; - dap1 { - nvidia,pins = "dap1"; - nvidia,function = "dap1"; - }; - dap2 { - nvidia,pins = "dap2"; - nvidia,function = "dap2"; - }; - dap3 { - nvidia,pins = "dap3"; - nvidia,function = "dap3"; - }; - dap4 { - nvidia,pins = "dap4"; - nvidia,function = "dap4"; - }; - dta { - nvidia,pins = "dta", "dtd"; - nvidia,function = "sdio2"; - }; - dtb { - nvidia,pins = "dtb", "dtc", "dte"; - nvidia,function = "rsvd1"; - }; - dtf { - nvidia,pins = "dtf"; - nvidia,function = "i2c3"; - }; - gmc { - nvidia,pins = "gmc"; - nvidia,function = "uartd"; - }; - gpu7 { - nvidia,pins = "gpu7"; - nvidia,function = "rtck"; - }; - gpv { - nvidia,pins = "gpv", "slxa", "slxk"; - nvidia,function = "pcie"; - }; - hdint { - nvidia,pins = "hdint"; - nvidia,function = "hdmi"; - }; - i2cp { - nvidia,pins = "i2cp"; - nvidia,function = "i2cp"; - }; - irrx { - nvidia,pins = "irrx", "irtx"; - nvidia,function = "uarta"; - }; - kbca { - nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", - "kbce", "kbcf"; - nvidia,function = "kbc"; - }; - lcsn { - nvidia,pins = "lcsn", "ld0", "ld1", "ld2", - "ld3", "ld4", "ld5", "ld6", "ld7", - "ld8", "ld9", "ld10", "ld11", "ld12", - "ld13", "ld14", "ld15", "ld16", "ld17", - "ldc", "ldi", "lhp0", "lhp1", "lhp2", - "lhs", "lm0", "lm1", "lpp", "lpw0", - "lpw1", "lpw2", "lsc0", "lsc1", "lsck", - "lsda", "lsdi", "lspi", "lvp0", "lvp1", - "lvs"; - nvidia,function = "displaya"; - }; - owc { - nvidia,pins = "owc", "spdi", "spdo", "uac"; - nvidia,function = "rsvd2"; - }; - pmc { - nvidia,pins = "pmc"; - nvidia,function = "pwr_on"; - }; - rm { - nvidia,pins = "rm"; - nvidia,function = "i2c1"; - }; - sdb { - nvidia,pins = "sdb", "sdc", "sdd"; - nvidia,function = "pwm"; - }; - sdio1 { - nvidia,pins = "sdio1"; - nvidia,function = "sdio1"; - }; - slxc { - nvidia,pins = "slxc", "slxd"; - nvidia,function = "spdif"; - }; - spid { - nvidia,pins = "spid", "spie", "spif"; - nvidia,function = "spi1"; - }; - spig { - nvidia,pins = "spig", "spih"; - nvidia,function = "spi2_alt"; - }; - uaa { - nvidia,pins = "uaa", "uab", "uda"; - nvidia,function = "ulpi"; - }; - uad { - nvidia,pins = "uad"; - nvidia,function = "irda"; - }; - uca { - nvidia,pins = "uca", "ucb"; - nvidia,function = "uartc"; - }; - conf_ata { - nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "cdev2", "dap1", "dtb", "gma", - "gmb", "gmc", "gmd", "gme", "gpu7", - "gpv", "i2cp", "pta", "rm", "slxa", - "slxk", "spia", "spib", "uac"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - conf_ck32 { - nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", - "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; - }; - conf_csus { - nvidia,pins = "csus", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; - }; - conf_crtp { - nvidia,pins = "crtp", "dap2", "dap3", "dap4", - "dtc", "dte", "dtf", "gpu", "sdio1", - "slxc", "slxd", "spdi", "spdo", "spig", - "uda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - }; - conf_ddc { - nvidia,pins = "ddc", "dta", "dtd", "kbca", - "kbcb", "kbcc", "kbcd", "kbce", "kbcf", - "sdc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - conf_hdint { - nvidia,pins = "hdint", "lcsn", "ldc", "lm1", - "lpw1", "lsc1", "lsck", "lsda", "lsdi", - "lvp0", "owc", "sdb"; - nvidia,tristate = <1>; - }; - conf_irrx { - nvidia,pins = "irrx", "irtx", "sdd", "spic", - "spie", "spih", "uaa", "uab", "uad", - "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; - }; - conf_lc { - nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; - }; - conf_ld0 { - nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", - "ld5", "ld6", "ld7", "ld8", "ld9", - "ld10", "ld11", "ld12", "ld13", "ld14", - "ld15", "ld16", "ld17", "ldi", "lhp0", - "lhp1", "lhp2", "lhs", "lm0", "lpp", - "lpw0", "lpw2", "lsc0", "lspi", "lvp1", - "lvs", "pmc"; - nvidia,tristate = <0>; - }; - conf_ld17_0 { - nvidia,pins = "ld17_0", "ld19_18", "ld21_20", - "ld23_22"; - nvidia,pull = <1>; - }; - }; - - state_i2cmux_ddc: pinmux_i2cmux_ddc { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "i2c2"; - }; - pta { - nvidia,pins = "pta"; - nvidia,function = "rsvd4"; - }; - }; - - state_i2cmux_pta: pinmux_i2cmux_pta { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "rsvd4"; - }; - pta { - nvidia,pins = "pta"; - nvidia,function = "i2c2"; - }; - }; - - state_i2cmux_idle: pinmux_i2cmux_idle { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "rsvd4"; - }; - pta { - nvidia,pins = "pta"; - nvidia,function = "rsvd4"; - }; - }; - }; - - i2s@70002800 { - status = "okay"; - }; - - serial@70006300 { - status = "okay"; - }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; - }; - - i2c@7000c000 { - clock-frequency = <400000>; - status = "okay"; - }; - - i2c@7000c400 { - clock-frequency = <100000>; - status = "okay"; - }; - - i2cmux { - compatible = "i2c-mux-pinctrl"; - #address-cells = <1>; - #size-cells = <0>; - - i2c-parent = <&{/i2c@7000c400}>; - - pinctrl-names = "ddc", "pta", "idle"; - pinctrl-0 = <&state_i2cmux_ddc>; - pinctrl-1 = <&state_i2cmux_pta>; - pinctrl-2 = <&state_i2cmux_idle>; - - hdmi_ddc: i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - i2c@7000d000 { - clock-frequency = <400000>; - status = "okay"; - - pmic: tps6586x@34 { - compatible = "ti,tps6586x"; - reg = <0x34>; - interrupts = <0 86 0x4>; - - ti,system-power-controller; - - #gpio-cells = <2>; - gpio-controller; - - sys-supply = <&vdd_5v0_reg>; - vin-sm0-supply = <&sys_reg>; - vin-sm1-supply = <&sys_reg>; - vin-sm2-supply = <&sys_reg>; - vinldo01-supply = <&sm2_reg>; - vinldo23-supply = <&sm2_reg>; - vinldo4-supply = <&sm2_reg>; - vinldo678-supply = <&sm2_reg>; - vinldo9-supply = <&sm2_reg>; - - regulators { - sys_reg: sys { - regulator-name = "vdd_sys"; - regulator-always-on; - }; - - sm0 { - regulator-name = "vdd_sys_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - sm1 { - regulator-name = "vdd_sys_sm1,vdd_cpu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - sm2_reg: sm2 { - regulator-name = "vdd_sys_sm2,vin_ldo*"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - }; - - ldo0 { - regulator-name = "vdd_ldo0,vddio_pex_clk"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo1 { - regulator-name = "vdd_ldo1,avdd_pll*"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo2 { - regulator-name = "vdd_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo3 { - regulator-name = "vdd_ldo3,avdd_usb*"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo4 { - regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo5 { - regulator-name = "vdd_ldo5,vcore_mmc"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - ldo6 { - regulator-name = "vdd_ldo6,avdd_vdac"; - /* - * According to the Tegra 2 Automotive - * DataSheet, a typical value for this - * would be 2.8V, but the PMIC only - * supports 2.85V. - */ - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - hdmi_vdd_reg: ldo7 { - regulator-name = "vdd_ldo7,avdd_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - hdmi_pll_reg: ldo8 { - regulator-name = "vdd_ldo8,avdd_hdmi_pll"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo9 { - regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; - /* - * According to the Tegra 2 Automotive - * DataSheet, a typical value for this - * would be 2.8V, but the PMIC only - * supports 2.85V. - */ - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - - ldo_rtc { - regulator-name = "vdd_rtc_out"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - temperature-sensor@4c { - compatible = "onnn,nct1008"; - reg = <0x4c>; - }; - }; - - pmc { - nvidia,invert-interrupt; - }; - - usb@c5008000 { - status = "okay"; - }; - - sdhci@c8000600 { - cd-gpios = <&gpio 58 1>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ - bus-width = <4>; - status = "okay"; - }; - - regulators { - compatible = "simple-bus"; - - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - }; -}; diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts deleted file mode 100644 index 4c1b08d..0000000 --- a/board/avionic-design/dts/tegra20-tec.dts +++ /dev/null @@ -1,77 +0,0 @@ -/dts-v1/; - -#include "tegra20-tamonten.dtsi" - -/ { - model = "Avionic Design Tamonten Evaluation Carrier"; - compatible = "ad,tec", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x { - status = "okay"; - - dc@54200000 { - status = "okay"; - - rgb { - nvidia,panel = <&lcd_panel>; - status = "okay"; - }; - }; - }; - - serial@70006300 { - clock-frequency = <216000000>; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - lcd_panel: panel { - clock = <33260000>; - xres = <800>; - yres = <480>; - left-margin = <120>; - right-margin = <120>; - hsync-len = <16>; - lower-margin = <15>; - upper-margin = <15>; - vsync-len = <15>; - - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 500000>; - nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,panel-timings = <0 0 0 0>; - }; -}; diff --git a/board/avionic-design/dts/tegra30-tamonten.dtsi b/board/avionic-design/dts/tegra30-tamonten.dtsi deleted file mode 100644 index 50d5762..0000000 --- a/board/avionic-design/dts/tegra30-tamonten.dtsi +++ /dev/null @@ -1,69 +0,0 @@ -#include "tegra30.dtsi" - -/ { - model = "Avionic Design Tamonten NG"; - compatible = "ad,tamonten-ng", "nvidia,tegra30"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - aliases { - i2c0 = "/i2c@7000c000"; - i2c1 = "/i2c@7000c700"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - i2c4 = "/i2c@7000d000"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000400"; - sdhci2 = "/sdhci@78000000"; - usb0 = "/usb@7d008000"; - }; - - /* GEN1 */ - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - /* GEN2 */ - i2c@7000c400 { - clock-frequency = <100000>; - }; - - /* CAM */ - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - }; - - /* DDC */ - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - /* PWR */ - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - }; - - /* SD slot on the base board */ - sdhci@78000400 { - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 67 0>; /* gpio PI3 */ - bus-width = <4>; - }; - - /* EMMC on the COM module */ - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - usb@7d008000 { - status = "okay"; - }; - -}; diff --git a/board/avionic-design/dts/tegra30-tec-ng.dts b/board/avionic-design/dts/tegra30-tec-ng.dts deleted file mode 100644 index 8a69e81..0000000 --- a/board/avionic-design/dts/tegra30-tec-ng.dts +++ /dev/null @@ -1,18 +0,0 @@ -/dts-v1/; - -#include "tegra30-tamonten.dtsi" - -/ { - model = "Avionic Design Tamonten™ NG Evaluation Carrier"; - compatible = "ad,tec-ng", "nvidia,tegra30"; - - /* GEN2 */ - i2c@7000c400 { - status = "okay"; - }; - - /* SD card slot */ - sdhci@78000400 { - status = "okay"; - }; -}; diff --git a/board/avionic-design/medcom-wide/Makefile b/board/avionic-design/medcom-wide/Makefile index 87e1912..bcf7ccf 100644 --- a/board/avionic-design/medcom-wide/Makefile +++ b/board/avionic-design/medcom-wide/Makefile @@ -9,4 +9,4 @@ obj-y := ../common/tamonten.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile index 87e1912..bcf7ccf 100644 --- a/board/avionic-design/plutux/Makefile +++ b/board/avionic-design/plutux/Makefile @@ -9,4 +9,4 @@ obj-y := ../common/tamonten.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/avionic-design/tec-ng/Makefile b/board/avionic-design/tec-ng/Makefile index 79d86026..a556b92 100644 --- a/board/avionic-design/tec-ng/Makefile +++ b/board/avionic-design/tec-ng/Makefile @@ -7,4 +7,4 @@ obj-y := ../common/tamonten-ng.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile index 87e1912..bcf7ccf 100644 --- a/board/avionic-design/tec/Makefile +++ b/board/avionic-design/tec/Makefile @@ -9,4 +9,4 @@ obj-y := ../common/tamonten.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/bct-brettl2/config.mk b/board/bct-brettl2/config.mk index f1ef9bf..0d3df2d 100644 --- a/board/bct-brettl2/config.mk +++ b/board/bct-brettl2/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf518f-ezbrd/config.mk b/board/bf518f-ezbrd/config.mk index f1ef9bf..0d3df2d 100644 --- a/board/bf518f-ezbrd/config.mk +++ b/board/bf518f-ezbrd/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf526-ezbrd/config.mk b/board/bf526-ezbrd/config.mk index f1ef9bf..0d3df2d 100644 --- a/board/bf526-ezbrd/config.mk +++ b/board/bf526-ezbrd/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf527-ad7160-eval/config.mk b/board/bf527-ad7160-eval/config.mk index f1ef9bf..0d3df2d 100644 --- a/board/bf527-ad7160-eval/config.mk +++ b/board/bf527-ad7160-eval/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf527-ezkit/config.mk b/board/bf527-ezkit/config.mk index f1ef9bf..0d3df2d 100644 --- a/board/bf527-ezkit/config.mk +++ b/board/bf527-ezkit/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf527-sdp/config.mk b/board/bf527-sdp/config.mk index 5f327a9..af299f5 100644 --- a/board/bf527-sdp/config.mk +++ b/board/bf527-sdp/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 6 diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk index 973d357..97eaafe 100644 --- a/board/bf533-ezkit/config.mk +++ b/board/bf533-ezkit/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk index 973d357..97eaafe 100644 --- a/board/bf533-stamp/config.mk +++ b/board/bf533-stamp/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk index ae2ea0b..bc0e747 100644 --- a/board/bf537-stamp/config.mk +++ b/board/bf537-stamp/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf538f-ezkit/config.mk b/board/bf538f-ezkit/config.mk index 973d357..97eaafe 100644 --- a/board/bf538f-ezkit/config.mk +++ b/board/bf538f-ezkit/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf548-ezkit/config.mk b/board/bf548-ezkit/config.mk index ad3a729..8d2c60f 100644 --- a/board/bf548-ezkit/config.mk +++ b/board/bf548-ezkit/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 diff --git a/board/bf561-acvilon/config.mk b/board/bf561-acvilon/config.mk index c33aef9..ce94715 100644 --- a/board/bf561-acvilon/config.mk +++ b/board/bf561-acvilon/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk index c33aef9..ce94715 100644 --- a/board/bf561-ezkit/config.mk +++ b/board/bf561-ezkit/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README index 5049093..9d84265 100644 --- a/board/boundary/nitrogen6x/README +++ b/board/boundary/nitrogen6x/README @@ -67,10 +67,10 @@ override auto-detection and force activation of the specified panel. To build U-Boot for one of the Nitrogen6x or SabreLite board: make nitrogen6x_config - make u-boot.imx + make Note that 'nitrogen6x' is a placeholder. The complete list of supported -board configurations is shown in tha MAINTAINERS file: +board configurations is shown in the boards.cfg file: nitrogen6q i.MX6Q/6D 1GB nitrogen6dl i.MX6DL 1GB nitrogen6s i.MX6S 512MB diff --git a/board/boundary/nitrogen6x/nitrogen6dl.cfg b/board/boundary/nitrogen6x/nitrogen6dl.cfg index 97ae0c2..1cdccad 100644 --- a/board/boundary/nitrogen6x/nitrogen6dl.cfg +++ b/board/boundary/nitrogen6x/nitrogen6dl.cfg @@ -16,7 +16,7 @@ IMAGE_VERSION 2 * Boot Device : one of * spi, sd (the board has no nand neither onenand) */ -BOOT_FROM sd +BOOT_FROM spi #define __ASSEMBLY__ #include <config.h> diff --git a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg index 82f837e..516d67e 100644 --- a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg @@ -16,7 +16,7 @@ IMAGE_VERSION 2 * Boot Device : one of * spi, sd (the board has no nand neither onenand) */ -BOOT_FROM sd +BOOT_FROM spi #define __ASSEMBLY__ #include <config.h> diff --git a/board/boundary/nitrogen6x/nitrogen6q.cfg b/board/boundary/nitrogen6x/nitrogen6q.cfg index b6f1518..b6642e6 100644 --- a/board/boundary/nitrogen6x/nitrogen6q.cfg +++ b/board/boundary/nitrogen6x/nitrogen6q.cfg @@ -16,7 +16,7 @@ IMAGE_VERSION 2 * Boot Device : one of * spi, sd (the board has no nand neither onenand) */ -BOOT_FROM sd +BOOT_FROM spi #define __ASSEMBLY__ #include <config.h> diff --git a/board/boundary/nitrogen6x/nitrogen6q2g.cfg b/board/boundary/nitrogen6x/nitrogen6q2g.cfg index 8d7ff25..fe6dfc1 100644 --- a/board/boundary/nitrogen6x/nitrogen6q2g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6q2g.cfg @@ -16,7 +16,7 @@ IMAGE_VERSION 2 * Boot Device : one of * spi, sd (the board has no nand neither onenand) */ -BOOT_FROM sd +BOOT_FROM spi #define __ASSEMBLY__ #include <config.h> diff --git a/board/boundary/nitrogen6x/nitrogen6s.cfg b/board/boundary/nitrogen6x/nitrogen6s.cfg index 34fb9d0..ca30cd6 100644 --- a/board/boundary/nitrogen6x/nitrogen6s.cfg +++ b/board/boundary/nitrogen6x/nitrogen6s.cfg @@ -16,7 +16,7 @@ IMAGE_VERSION 2 * Boot Device : one of * spi, sd (the board has no nand neither onenand) */ -BOOT_FROM sd +BOOT_FROM spi #define __ASSEMBLY__ #include <config.h> diff --git a/board/boundary/nitrogen6x/nitrogen6s1g.cfg b/board/boundary/nitrogen6x/nitrogen6s1g.cfg index d61453c..b1489fb 100644 --- a/board/boundary/nitrogen6x/nitrogen6s1g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6s1g.cfg @@ -16,7 +16,7 @@ IMAGE_VERSION 2 * Boot Device : one of * spi, sd (the board has no nand neither onenand) */ -BOOT_FROM sd +BOOT_FROM spi #define __ASSEMBLY__ #include <config.h> diff --git a/board/br4/config.mk b/board/br4/config.mk index 5c18d5c..2436ec0 100644 --- a/board/br4/config.mk +++ b/board/br4/config.mk @@ -9,6 +9,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/chromebook-x86/coreboot/config.mk b/board/chromebook-x86/coreboot/config.mk deleted file mode 100644 index 0c05dd0..0000000 --- a/board/chromebook-x86/coreboot/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# Copyright (c) 2011 The Chromium OS Authors. All rights reserved. -# -# SPDX-License-Identifier: GPL-2.0 BSD-3-Clause -# - -HOSTCFLAGS_autoconf.mk.dep = -Wno-variadic-macros diff --git a/board/chromebook-x86/dts/alex.dts b/board/chromebook-x86/dts/alex.dts deleted file mode 100644 index 2f13544..0000000 --- a/board/chromebook-x86/dts/alex.dts +++ /dev/null @@ -1,24 +0,0 @@ -/dts-v1/; - -/include/ "coreboot.dtsi" - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "Google Alex"; - compatible = "google,alex", "intel,atom-pineview"; - - config { - silent_console = <0>; - }; - - gpio: gpio {}; - - serial { - reg = <0x3f8 8>; - clock-frequency = <115200>; - }; - - chosen { }; - memory { device_type = "memory"; reg = <0 0>; }; -}; diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts deleted file mode 100644 index 4a37dac..0000000 --- a/board/chromebook-x86/dts/link.dts +++ /dev/null @@ -1,35 +0,0 @@ -/dts-v1/; - -/include/ "coreboot.dtsi" - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "Google Link"; - compatible = "google,link", "intel,celeron-ivybridge"; - - config { - silent_console = <0>; - }; - - gpio: gpio {}; - - serial { - reg = <0x3f8 8>; - clock-frequency = <115200>; - }; - - chosen { }; - memory { device_type = "memory"; reg = <0 0>; }; - - spi { - #address-cells = <1>; - #size-cells = <0>; - compatible = "intel,ich9"; - spi-flash@0 { - reg = <0>; - compatible = "winbond,w25q64", "spi-flash"; - memory-map = <0xff800000 0x00800000>; - }; - }; -}; diff --git a/board/cm-bf527/config.mk b/board/cm-bf527/config.mk index f1ef9bf..0d3df2d 100644 --- a/board/cm-bf527/config.mk +++ b/board/cm-bf527/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/cm-bf533/config.mk b/board/cm-bf533/config.mk index 973d357..97eaafe 100644 --- a/board/cm-bf533/config.mk +++ b/board/cm-bf533/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf537e/config.mk b/board/cm-bf537e/config.mk index 973d357..97eaafe 100644 --- a/board/cm-bf537e/config.mk +++ b/board/cm-bf537e/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf537u/config.mk b/board/cm-bf537u/config.mk index 973d357..97eaafe 100644 --- a/board/cm-bf537u/config.mk +++ b/board/cm-bf537u/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf548/config.mk b/board/cm-bf548/config.mk index c005afb..289c8a4 100644 --- a/board/cm-bf548/config.mk +++ b/board/cm-bf548/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 diff --git a/board/cm-bf548/video.c b/board/cm-bf548/video.c index a43413e..c35d285 100644 --- a/board/cm-bf548/video.c +++ b/board/cm-bf548/video.c @@ -11,6 +11,7 @@ #include <config.h> #include <malloc.h> #include <asm/blackfin.h> +#include <asm/clock.h> #include <asm/gpio.h> #include <asm/portmux.h> #include <asm/mach-common/bits/dma.h> diff --git a/board/cm-bf561/config.mk b/board/cm-bf561/config.mk index c33aef9..ce94715 100644 --- a/board/cm-bf561/config.mk +++ b/board/cm-bf561/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/compal/dts/tegra20-paz00.dts b/board/compal/dts/tegra20-paz00.dts deleted file mode 100644 index 780203c..0000000 --- a/board/compal/dts/tegra20-paz00.dts +++ /dev/null @@ -1,91 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "Toshiba AC100 / Dynabook AZ"; - compatible = "compal,paz00", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000000"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; - }; - - serial@70006000 { - clock-frequency = < 216000000 >; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000000 { - status = "okay"; - cd-gpios = <&gpio 173 1>; /* gpio PV5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 169 0>; /* gpio PV1 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - }; - - lcd_panel: panel { - /* PAZ00 has 1024x600 */ - clock = <54030000>; - xres = <1024>; - yres = <600>; - right-margin = <160>; - left-margin = <24>; - hsync-len = <136>; - upper-margin = <3>; - lower-margin = <61>; - vsync-len = <6>; - hsync-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 0>; - nvidia,backlight-enable-gpios = <&gpio 164 0>; /* PU4 */ - nvidia,lvds-shutdown-gpios = <&gpio 102 0>; /* PM6 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,panel-vdd-gpios = <&gpio 4 0>; /* PA4 */ - nvidia,panel-timings = <400 4 203 17 15>; - }; -}; diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile index b2d3b6b..e6a0b29 100644 --- a/board/compal/paz00/Makefile +++ b/board/compal/paz00/Makefile @@ -16,4 +16,4 @@ obj-y := paz00.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts deleted file mode 100644 index ee31476..0000000 --- a/board/compulab/dts/tegra20-trimslice.dts +++ /dev/null @@ -1,64 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "Compulab TrimSlice board"; - compatible = "compulab,trimslice", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000000"; - }; - - memory { - reg = <0x00000000 0x40000000>; - }; - - serial@70006000 { - clock-frequency = <216000000>; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - spi@7000c380 { - status = "okay"; - spi-max-frequency = <25000000>; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */ - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000000 { - status = "okay"; - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - cd-gpios = <&gpio 121 1>; /* gpio PP1 */ - wp-gpios = <&gpio 122 0>; /* gpio PP2 */ - bus-width = <4>; - }; -}; diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile index f3bd00d..311eb92 100644 --- a/board/compulab/trimslice/Makefile +++ b/board/compulab/trimslice/Makefile @@ -7,4 +7,4 @@ obj-y := trimslice.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/cray/L1/Makefile b/board/cray/L1/Makefile index 5f6c690..63f43da 100644 --- a/board/cray/L1/Makefile +++ b/board/cray/L1/Makefile @@ -9,8 +9,10 @@ obj-y = L1.o flash.o obj-y += init.o obj-y += bootscript.o -$(obj)bootscript.c: $(obj)bootscript.image - od -t x1 -v -A x $^ | awk -f x2c.awk > $@ +$(obj)/bootscript.c: $(obj)/bootscript.image + od -t x1 -v -A x $^ | awk -f $(srctree)/$(src)/x2c.awk > $@ -$(obj)bootscript.image: $(src)bootscript.hush $(src)Makefile - -$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $(src)bootscript.hush $@ +$(obj)/bootscript.image: $(src)/bootscript.hush + -$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $< $@ + +clean-files := bootscript.c bootscript.image
\ No newline at end of file diff --git a/board/dvlhost/Makefile b/board/dvlhost/Makefile deleted file mode 100644 index 8b48936..0000000 --- a/board/dvlhost/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dvlhost.o watchdog.o diff --git a/board/dvlhost/dvlhost.c b/board/dvlhost/dvlhost.c deleted file mode 100644 index 087070f..0000000 --- a/board/dvlhost/dvlhost.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2009 - * Michael Schwingen, michael@schwingen.org - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <miiphy.h> -#ifdef CONFIG_PCI -#include <pci.h> -#include <asm/arch/ixp425pci.h> -#endif - -#include "dvlhost_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* CS1: LED Latch */ - writel(0xBFFF0002, IXP425_EXP_CS1); - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - /* Setup GPIOs used as output */ - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_WDGTRIGGER); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DLAN_PAIRING); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PCIRST); - - /* - * LED latch enable and watchdog enable are tied to the same GPIO, - * so we need to trigger the watchdog if we want to enable the LEDs. - */ -#ifdef CONFIG_HW_WATCHDOG - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_WDG_LED_EN); -#else - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_WDG_LED_EN); -#endif - - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_WDGTRIGGER); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DLAN_PAIRING); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_WDG_LED_EN); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCIRST); - - /* Setup GPIOs for Interrupt inputs */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_WLAN); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_PAIRING); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_RESET); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_IRQA); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_IRQB); - - /* Setup GPIO's for 33MHz clock output */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - writel(0x01FF01FF, IXP425_GPIO_GPCLKR); - - /* turn off all LEDs */ - writew(0x0000, DVLHOST_LED_LATCH); - - udelay(533); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_PCIRST); - - return 0; -} - -/* Check Board Identity */ -int checkboard(void) -{ - char *s = getenv("serial#"); - - puts("Board: dLAN 200AV (dvlhost)"); - - if (s != NULL) { - puts(", serial# "); - puts(s); - } - putc('\n'); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - -#ifdef CONFIG_PCI -struct pci_controller hose; - -void pci_init_board(void) -{ - pci_ixp_init(&hose); -} -#endif - -void reset_phy(void) -{ - /* init IcPlus IP175C ethernet switch to native IP175C mode */ - miiphy_write("NPE1", 29, 31, 0x175C); -} diff --git a/board/dvlhost/dvlhost_hw.h b/board/dvlhost/dvlhost_hw.h deleted file mode 100644 index 545099e..0000000 --- a/board/dvlhost/dvlhost_hw.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * (C) Copyright 2009 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the - * dLAN200 AV Wireless G ("dvlhost") board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _DVLHOST_HW_H -#define _DVLHOST_HW_H - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPIO_WDGTRIGGER 0 /* Out */ -#define CONFIG_SYS_GPIO_BTN_WLAN 1 -#define CONFIG_SYS_GPIO_BTN_PAIRING 6 -#define CONFIG_SYS_GPIO_DLAN_PAIRING 7 /* Out */ -#define CONFIG_SYS_GPIO_BTN_RESET 9 -#define CONFIG_SYS_GPIO_IRQB 10 -#define CONFIG_SYS_GPIO_IRQA 11 -#define CONFIG_SYS_GPIO_WDG_LED_EN 12 /* Out */ -#define CONFIG_SYS_GPIO_PCIRST 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#define DVLHOST_LED_LATCH IXP425_EXP_BUS_CS1_BASE_PHYS - -#endif diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds deleted file mode 100644 index ebcaf44..0000000 --- a/board/dvlhost/u-boot.lds +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") -OUTPUT_ARCH (arm) -ENTRY (_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN (4); - .text : { - *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) - net/built-in.o(.text*) - board/dvlhost/built-in.o(.text*) - arch/arm/cpu/ixp/built-in.o(.text*) - drivers/serial/built-in.o(.text*) - - . = env_offset; - common/env_embedded.o(.ppcenv) - *(.text*) - } - - . = ALIGN (4); - .rodata : { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - . = ALIGN (4); - .data : { - *(.data*) - } - . = ALIGN (4); - .got : { - *(.got) - } - . =.; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN (4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - _end = .; - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/dvlhost/watchdog.c b/board/dvlhost/watchdog.c deleted file mode 100644 index 02ec35e..0000000 --- a/board/dvlhost/watchdog.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * (C) Copyright 2009 - * Michael Schwingen, michael@schwingen.org - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> -#include <asm/io.h> -#include "dvlhost_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_HW_WATCHDOG -#include <watchdog.h> -#include <asm/arch/ixp425.h> - -void hw_watchdog_reset(void) -{ - unsigned int x; - x = readl(IXP425_GPIO_GPOUTR); - x ^= (1 << (CONFIG_SYS_GPIO_WDGTRIGGER)); - writel(x, IXP425_GPIO_GPOUTR); -} - -#endif /* CONFIG_HW_WATCHDOG */ diff --git a/board/fads/fads.h b/board/fads/fads.h index cf6c928..fa49080 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -127,8 +127,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c index 3cfdb72..2111711 100644 --- a/board/freescale/c29xpcie/spl.c +++ b/board/freescale/c29xpcie/spl.c @@ -12,7 +12,7 @@ DECLARE_GLOBAL_DATA_PTR; -ulong get_effective_memsize(void) +phys_size_t get_effective_memsize(void) { return CONFIG_SYS_L2_SIZE; } diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 25f063d..f6a0879 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -13,7 +13,10 @@ MINIMAL=y endif endif -ifndef MINIMAL +ifdef MINIMAL +# necessary to create built-in.o +obj- := __dummy__.o +else obj-$(CONFIG_FSL_CADMUS) += cadmus.o obj-$(CONFIG_FSL_VIA) += cds_via.o obj-$(CONFIG_FMAN_ENET) += fman.o diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index db0bf17..08dd66f 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -343,6 +343,7 @@ int board_early_init_f(void) return 0; } +#if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) { u32 cpurev; @@ -356,6 +357,7 @@ int print_cpuinfo(void) printf("Reset cause: %s\n", get_reset_cause()); return 0; } +#endif /* * Do not overwrite the console diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg index 6d192a6..16bf473 100644 --- a/board/freescale/mx6qsabreauto/imximage.cfg +++ b/board/freescale/mx6qsabreauto/imximage.cfg @@ -29,119 +29,101 @@ BOOT_FROM sd * Address absolute address of the register * value value to be stored in the register */ +DATA 4 0x020e0798 0x000C0000 +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0588 0x00000030 +DATA 4 0x020e0594 0x00000030 +DATA 4 0x020e056c 0x00000030 +DATA 4 0x020e0578 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e057c 0x00000030 +DATA 4 0x020e058c 0x00000000 +DATA 4 0x020e059c 0x00000030 +DATA 4 0x020e05a0 0x00000030 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0750 0x00020000 DATA 4 0x020e05a8 0x00000028 DATA 4 0x020e05b0 0x00000028 DATA 4 0x020e0524 0x00000028 DATA 4 0x020e051c 0x00000028 - DATA 4 0x020e0518 0x00000028 DATA 4 0x020e050c 0x00000028 DATA 4 0x020e05b8 0x00000028 DATA 4 0x020e05c0 0x00000028 - -DATA 4 0x020e05ac 0x00000028 -DATA 4 0x020e05b4 0x00000028 -DATA 4 0x020e0528 0x00000028 -DATA 4 0x020e0520 0x00000028 - -DATA 4 0x020e0514 0x00000028 -DATA 4 0x020e0510 0x00000028 -DATA 4 0x020e05bc 0x00000028 -DATA 4 0x020e05c4 0x00000028 - -DATA 4 0x020e056c 0x00000030 -DATA 4 0x020e0578 0x00000030 -DATA 4 0x020e0588 0x00000030 -DATA 4 0x020e0594 0x00000030 - -DATA 4 0x020e057c 0x00000030 -DATA 4 0x020e0590 0x00000030 -DATA 4 0x020e0598 0x00000030 -DATA 4 0x020e058c 0x00000000 - -DATA 4 0x020e059c 0x00003030 -DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e0774 0x00020000 DATA 4 0x020e0784 0x00000028 DATA 4 0x020e0788 0x00000028 - DATA 4 0x020e0794 0x00000028 DATA 4 0x020e079c 0x00000028 DATA 4 0x020e07a0 0x00000028 DATA 4 0x020e07a4 0x00000028 - DATA 4 0x020e07a8 0x00000028 DATA 4 0x020e0748 0x00000028 -DATA 4 0x020e074c 0x00000030 -DATA 4 0x020e0750 0x00020000 - -DATA 4 0x020e0758 0x00000000 -DATA 4 0x020e0774 0x00020000 -DATA 4 0x020e078c 0x00000030 -DATA 4 0x020e0798 0x000C0000 - +DATA 4 0x020e05ac 0x00000028 +DATA 4 0x020e05b4 0x00000028 +DATA 4 0x020e0528 0x00000028 +DATA 4 0x020e0520 0x00000028 +DATA 4 0x020e0514 0x00000028 +DATA 4 0x020e0510 0x00000028 +DATA 4 0x020e05bc 0x00000028 +DATA 4 0x020e05c4 0x00000028 +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F +DATA 4 0x021b480c 0x001F001F +DATA 4 0x021b4810 0x001F001F +DATA 4 0x021b083c 0x43260335 +DATA 4 0x021b0840 0x031A030B +DATA 4 0x021b483c 0x4323033B +DATA 4 0x021b4840 0x0323026F +DATA 4 0x021b0848 0x483D4545 +DATA 4 0x021b4848 0x44433E48 +DATA 4 0x021b0850 0x41444840 +DATA 4 0x021b4850 0x4835483E DATA 4 0x021b081c 0x33333333 DATA 4 0x021b0820 0x33333333 DATA 4 0x021b0824 0x33333333 DATA 4 0x021b0828 0x33333333 - DATA 4 0x021b481c 0x33333333 DATA 4 0x021b4820 0x33333333 DATA 4 0x021b4824 0x33333333 DATA 4 0x021b4828 0x33333333 - +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 +DATA 4 0x021b0004 0x00020036 +DATA 4 0x021b0008 0x09444040 +DATA 4 0x021b000c 0x8A8F7955 +DATA 4 0x021b0010 0xFF328F64 +DATA 4 0x021b0014 0x01FF00DB DATA 4 0x021b0018 0x00001740 - DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b000c 0x8A8F7975 -DATA 4 0x021b0010 0xFF538E64 -DATA 4 0x021b0014 0x01FF00DB -DATA 4 0x021b002c 0x000026D2 - -DATA 4 0x021b0030 0x008F0E21 -DATA 4 0x021b0008 0x09444040 -DATA 4 0x021b0004 0x00020036 +DATA 4 0x021b002c 0x000026d2 +DATA 4 0x021b0030 0x008F1023 DATA 4 0x021b0040 0x00000047 DATA 4 0x021b0000 0x841A0000 - DATA 4 0x021b001c 0x04088032 DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00048031 DATA 4 0x021b001c 0x09408030 - DATA 4 0x021b001c 0x04008040 -DATA 4 0x021b0800 0xA1380003 DATA 4 0x021b0020 0x00005800 -DATA 4 0x021b0818 0x00000007 -DATA 4 0x021b4818 0x00000007 - -/* Calibration values based on ARD and 528MHz */ -DATA 4 0x021b083c 0x434B0358 -DATA 4 0x021b0840 0x033D033C -DATA 4 0x021b483c 0x03520362 -DATA 4 0x021b4840 0x03480318 -DATA 4 0x021b0848 0x41383A3C -DATA 4 0x021b4848 0x3F3C374A -DATA 4 0x021b0850 0x42434444 -DATA 4 0x021b4850 0x4932473A - -DATA 4 0x021b080c 0x001F001F -DATA 4 0x021b0810 0x001F001F - -DATA 4 0x021b480c 0x001F001F -DATA 4 0x021b4810 0x001F001F - -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b48b8 0x00000800 - -DATA 4 0x021b0404 0x00011006 +DATA 4 0x021b0818 0x00011117 +DATA 4 0x021b4818 0x00011117 DATA 4 0x021b0004 0x00025576 - +DATA 4 0x021b0404 0x00011006 DATA 4 0x021b001c 0x00000000 +/* set the default clock gate to save power */ DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC00 +DATA 4 0x020c406c 0x0030FC03 DATA 4 0x020c4070 0x0FFFC000 DATA 4 0x020c4074 0x3FF00000 -DATA 4 0x020c4078 0x00FFF300 -DATA 4 0x020c407c 0x0F0000C3 -DATA 4 0x020c4080 0x000003FF +DATA 4 0x020c4078 0xFFFFF300 +DATA 4 0x020c407c 0x0F0000F3 +DATA 4 0x020c4080 0x00000FFF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c index 8fed26d..11bd9cf 100644 --- a/board/freescale/p1010rdb/spl.c +++ b/board/freescale/p1010rdb/spl.c @@ -14,7 +14,7 @@ DECLARE_GLOBAL_DATA_PTR; -ulong get_effective_memsize(void) +phys_size_t get_effective_memsize(void) { return CONFIG_SYS_L2_SIZE; } diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c index 7f151e3..7bd9d29 100644 --- a/board/freescale/p1022ds/spl.c +++ b/board/freescale/p1022ds/spl.c @@ -21,7 +21,7 @@ static const u32 sysclk_tbl[] = { 99999000, 11111000, 12499800, 13333200 }; -ulong get_effective_memsize(void) +phys_size_t get_effective_memsize(void) { return CONFIG_SYS_L2_SIZE; } diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c index 9bb0716..8d0d850 100644 --- a/board/freescale/p1_p2_rdb_pc/spl.c +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -20,7 +20,7 @@ static const u32 sysclk_tbl[] = { 99999000, 11111000, 12499800, 13333200 }; -ulong get_effective_memsize(void) +phys_size_t get_effective_memsize(void) { return CONFIG_SYS_L2_SIZE; } diff --git a/board/h2200/Makefile b/board/h2200/Makefile index d4fa153..e516e91 100644 --- a/board/h2200/Makefile +++ b/board/h2200/Makefile @@ -10,5 +10,5 @@ obj-y := h2200.o extra-y := h2200-header.bin -$(obj)h2200-header.bin: $(obj)h2200-header.o +$(obj)/h2200-header.bin: $(obj)/h2200-header.o $(OBJCOPY) -O binary $< $@ diff --git a/board/hymod/config.mk b/board/hymod/config.mk index abcd2d5..ee15890 100644 --- a/board/hymod/config.mk +++ b/board/hymod/config.mk @@ -11,4 +11,4 @@ PLATFORM_CPPFLAGS += -I$(TOPDIR) -OBJCFLAGS = --remove-section=.ppcenv +OBJCOPYFLAGS = --remove-section=.ppcenv diff --git a/board/ip04/config.mk b/board/ip04/config.mk index ae2ea0b..bc0e747 100644 --- a/board/ip04/config.mk +++ b/board/ip04/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/keymile/km_arm/fpga_config.c b/board/keymile/km_arm/fpga_config.c index cbfc7d2..51a3cfe 100644 --- a/board/keymile/km_arm/fpga_config.c +++ b/board/keymile/km_arm/fpga_config.c @@ -189,6 +189,31 @@ int wait_for_fpga_config(void) return 0; } +#if defined(KM_PCIE_RESET_MPP7) + +#define KM_PEX_RST_GPIO_PIN 7 +int fpga_reset(void) +{ + if (!check_boco2()) { + /* we do not have BOCO2, this is not really used */ + return 0; + } + + printf("PCIe reset through GPIO7: "); + /* apply PCIe reset via GPIO */ + kw_gpio_set_valid(KM_PEX_RST_GPIO_PIN, 1); + kw_gpio_direction_output(KM_PEX_RST_GPIO_PIN, 1); + kw_gpio_set_value(KM_PEX_RST_GPIO_PIN, 0); + udelay(1000*10); + kw_gpio_set_value(KM_PEX_RST_GPIO_PIN, 1); + + printf(" done\n"); + + return 0; +} + +#else + #define PRST1 0x4 #define PCIE_RST 0x10 #define TRAFFIC_RST 0x04 @@ -219,6 +244,7 @@ int fpga_reset(void) return 0; } +#endif /* the FPGA was configured, we configure the BOCO2 so that the EEPROM * is available from the Bobcat SPI bus */ diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 5620737..35402c8 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -46,7 +46,11 @@ static const u32 kwmpp_config[] = { MPP4_NF_IO6, MPP5_NF_IO7, MPP6_SYSRST_OUTn, +#if defined(KM_PCIE_RESET_MPP7) + MPP7_GPO, +#else MPP7_PEX_RST_OUTn, +#endif #if defined(CONFIG_SYS_I2C_SOFT) MPP8_GPIO, /* SDA */ MPP9_GPIO, /* SCL */ @@ -102,7 +106,7 @@ static const u32 kwmpp_config[] = { /* * Wait for startup OK from mgcoge3ne */ -int startup_allowed(void) +static int startup_allowed(void) { unsigned char buf; @@ -164,7 +168,6 @@ static int initialize_unit_leds(void) return 0; } -#if defined(CONFIG_BOOTCOUNT_LIMIT) static void set_bootcount_addr(void) { uchar buf[32]; @@ -173,7 +176,6 @@ static void set_bootcount_addr(void) sprintf((char *)buf, "0x%x", bootcountaddr); setenv("bootcountaddr", (char *)buf); } -#endif int misc_init_r(void) { @@ -210,9 +212,7 @@ int misc_init_r(void) initialize_unit_leds(); set_km_env(); -#if defined(CONFIG_BOOTCOUNT_LIMIT) set_bootcount_addr(); -#endif return 0; } @@ -322,15 +322,15 @@ void reset_phy(void) return; /* RGMII clk transition on data stable */ - if (!miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, ®)) + if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, ®)) printf("Error reading PHY spec ctrl reg\n"); - if (!miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, - reg | PHY_RGMII_CLK_STABLE | PHY_CLSA)) + if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, + reg | PHY_RGMII_CLK_STABLE | PHY_CLSA)) printf("Error writing PHY spec ctrl reg\n"); /* leds setup */ - if (!miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG, - PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT)) + if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG, + PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT)) printf("Error writing PHY LED reg\n"); /* reset the phy */ diff --git a/board/keymile/scripts/develop-arm.txt b/board/keymile/scripts/develop-arm.txt index 922afea..d3c974f 100644 --- a/board/keymile/scripts/develop-arm.txt +++ b/board/keymile/scripts/develop-arm.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=true diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt index a6bb1b1..a80812a 100644 --- a/board/keymile/scripts/develop-common.txt +++ b/board/keymile/scripts/develop-common.txt @@ -3,6 +3,7 @@ bootcmd=run ${subbootcmds} configure=run set_uimage; km_setboardid && saveenv && reset subbootcmds=tftpfdt tftpkernel nfsargs add_default boot nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch} +tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage} toolchain=/opt/eldk rootfssize=0 diff --git a/board/keymile/scripts/develop-ppc_82xx.txt b/board/keymile/scripts/develop-ppc_82xx.txt index 909f6a3..d3c974f 100644 --- a/board/keymile/scripts/develop-ppc_82xx.txt +++ b/board/keymile/scripts/develop-ppc_82xx.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb diff --git a/board/keymile/scripts/develop-ppc_8xx.txt b/board/keymile/scripts/develop-ppc_8xx.txt index 909f6a3..d3c974f 100644 --- a/board/keymile/scripts/develop-ppc_8xx.txt +++ b/board/keymile/scripts/develop-ppc_8xx.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb diff --git a/board/keymile/scripts/ramfs-arm.txt b/board/keymile/scripts/ramfs-arm.txt index 79974f1..87e984e 100644 --- a/board/keymile/scripts/ramfs-arm.txt +++ b/board/keymile/scripts/ramfs-arm.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=true diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt index 502c863..d79ad2e 100644 --- a/board/keymile/scripts/ramfs-common.txt +++ b/board/keymile/scripts/ramfs-common.txt @@ -7,6 +7,7 @@ nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} configure=run set_uimage; km_setboardid && saveenv && reset rootfsfile=${hostname}/rootfsImage setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value} +tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage} tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage set_uimage=printenv uimage || setenv uimage uImage diff --git a/board/keymile/scripts/ramfs-ppc_82xx.txt b/board/keymile/scripts/ramfs-ppc_82xx.txt index 970927a..87e984e 100644 --- a/board/keymile/scripts/ramfs-ppc_82xx.txt +++ b/board/keymile/scripts/ramfs-ppc_82xx.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb diff --git a/board/keymile/scripts/ramfs-ppc_8xx.txt b/board/keymile/scripts/ramfs-ppc_8xx.txt index 970927a..87e984e 100644 --- a/board/keymile/scripts/ramfs-ppc_8xx.txt +++ b/board/keymile/scripts/ramfs-ppc_8xx.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb diff --git a/board/matrix_vision/mvblm7/Makefile b/board/matrix_vision/mvblm7/Makefile index 879d794..1bc1d61 100644 --- a/board/matrix_vision/mvblm7/Makefile +++ b/board/matrix_vision/mvblm7/Makefile @@ -8,5 +8,5 @@ obj-y := mvblm7.o pci.o fpga.o extra-y := bootscript.img -$(obj)bootscript.img: - @mkimage -T script -C none -n M7_script -d bootscript $@ +$(obj)/bootscript.img: $(src)/bootscript + @mkimage -T script -C none -n M7_script -d $< $@ diff --git a/board/matrix_vision/mvblx/Makefile b/board/matrix_vision/mvblx/Makefile index c6c0933..c056eba 100644 --- a/board/matrix_vision/mvblx/Makefile +++ b/board/matrix_vision/mvblx/Makefile @@ -8,4 +8,4 @@ obj-y += mvblx.o fpga.o obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o -CFLAGS += -Werror +ccflags-y += -Werror diff --git a/board/matrix_vision/mvsmr/Makefile b/board/matrix_vision/mvsmr/Makefile index b6a4f67..9454259 100644 --- a/board/matrix_vision/mvsmr/Makefile +++ b/board/matrix_vision/mvsmr/Makefile @@ -12,5 +12,5 @@ obj-y := mvsmr.o fpga.o extra-y := bootscript.img -$(obj)bootscript.img: bootscript +$(obj)/bootscript.img: $(src)/bootscript @mkimage -T script -C none -n mvSMR_Script -d $< $@ diff --git a/board/nokia/rx51/rx51.h b/board/nokia/rx51/rx51.h index 4a230dd..0d2f0a5 100644 --- a/board/nokia/rx51/rx51.h +++ b/board/nokia/rx51/rx51.h @@ -22,8 +22,6 @@ struct emu_hal_params_rx51 { u32 param4; }; -int print_cpuinfo(void); - /* * IEN - Input Enable * IDIS - Input Disable diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile index e3fcf2b..e3b2651 100644 --- a/board/nvidia/common/Makefile +++ b/board/nvidia/common/Makefile @@ -1,4 +1,4 @@ # Copyright (c) 2011 The Chromium OS Authors. # SPDX-License-Identifier: GPL-2.0+ -include common.mk +include $(src)/common.mk diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index e650fed..3b18e28 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -67,12 +67,14 @@ void __gpio_early_init_uart(void) void gpio_early_init_uart(void) __attribute__((weak, alias("__gpio_early_init_uart"))); +#if defined(CONFIG_TEGRA_NAND) void __pin_mux_nand(void) { funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT); } void pin_mux_nand(void) __attribute__((weak, alias("__pin_mux_nand"))); +#endif void __pin_mux_display(void) { diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts deleted file mode 100644 index 435c01e..0000000 --- a/board/nvidia/dts/tegra114-dalmore.dts +++ /dev/null @@ -1,71 +0,0 @@ -/dts-v1/; - -#include "tegra114.dtsi" - -/ { - model = "NVIDIA Dalmore"; - compatible = "nvidia,dalmore", "nvidia,tegra114"; - - aliases { - i2c0 = "/i2c@7000d000"; - i2c1 = "/i2c@7000c000"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000400"; - usb0 = "/usb@7d008000"; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <400000>; - }; - - spi@7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - }; - - sdhci@78000400 { - cd-gpios = <&gpio 170 1>; /* gpio PV2 */ - bus-width = <4>; - status = "okay"; - }; - - sdhci@78000600 { - bus-width = <8>; - status = "okay"; - }; - - usb@7d008000 { - /* SPDIF_IN: USB_VBUS_EN1 */ - nvidia,vbus-gpio = <&gpio 86 0>; - status = "okay"; - }; -}; diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts deleted file mode 100644 index b115f87..0000000 --- a/board/nvidia/dts/tegra20-harmony.dts +++ /dev/null @@ -1,105 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Tegra20 Harmony evaluation board"; - compatible = "nvidia,harmony", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5004000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000200"; - }; - - memory { - reg = <0x00000000 0x40000000>; - }; - - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ - }; - - sdhci@c8000200 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - cd-gpios = <&gpio 58 1>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <8>; - }; - - lcd_panel: panel { - clock = <42430000>; - xres = <1024>; - yres = <600>; - left-margin = <138>; - right-margin = <34>; - hsync-len = <136>; - lower-margin = <4>; - upper-margin = <21>; - vsync-len = <4>; - hsync-active-high; - vsyncx-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 0>; - nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ - nvidia,panel-timings = <0 0 200 0 0>; - }; -}; diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts deleted file mode 100644 index c0e2e1e..0000000 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ /dev/null @@ -1,191 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Seaboard"; - compatible = "nvidia,seaboard", "nvidia,tegra20"; - - chosen { - bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait"; - }; - - aliases { - /* This defines the order of our ports */ - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; - i2c0 = "/i2c@7000d000"; - i2c1 = "/i2c@7000c000"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; - }; - - memory { - device_type = "memory"; - reg = < 0x00000000 0x40000000 >; - }; - - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; - }; - - /* This is not used in U-Boot, but is expected to be in kernel .dts */ - i2c@7000d000 { - clock-frequency = <100000>; - pmic@34 { - compatible = "ti,tps6586x"; - reg = <0x34>; - - clk_32k: clock { - compatible = "fixed-clock"; - /* - * leave out for now due to CPP: - * #clock-cells = <0>; - */ - clock-frequency = <32768>; - }; - }; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; - }; - - i2c@7000c000 { - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - clock-frequency = <100000>; - }; - - kbc@7000e200 { - linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c - 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006 - 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020 - 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023 - 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a - 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031 - 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018 - 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032 - 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036 - 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019 - 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044 - 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067 - 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068 - 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057 - 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d - 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f - 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040 - 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f - 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050 - 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053 - 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072 - 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071 - 0x1f04008a>; - linux,fn-keymap = <0x05040002>; - }; - - emc@7000f400 { - emc-table@190000 { - reg = < 190000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 190000 >; - nvidia,emc-registers = < 0x0000000c 0x00000026 - 0x00000009 0x00000003 0x00000004 0x00000004 - 0x00000002 0x0000000c 0x00000003 0x00000003 - 0x00000002 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x0000059f - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000003 0x00000001 0x0000000b 0x000000c8 - 0x00000003 0x00000007 0x00000004 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xa06204ae - 0x007dc010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - emc-table@380000 { - reg = < 380000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 380000 >; - nvidia,emc-registers = < 0x00000017 0x0000004b - 0x00000012 0x00000006 0x00000004 0x00000005 - 0x00000003 0x0000000c 0x00000006 0x00000006 - 0x00000003 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x00000b5f - 0x00000000 0x00000003 0x00000003 0x00000006 - 0x00000006 0x00000001 0x00000011 0x000000c8 - 0x00000003 0x0000000e 0x00000007 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xe044048b - 0x007d8010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - }; - - usb@c5000000 { - nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ - dr_mode = "otg"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000400 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - }; - - lcd_panel: panel { - /* Seaboard has 1366x768 */ - clock = <70600000>; - xres = <1366>; - yres = <768>; - left-margin = <58>; - right-margin = <58>; - hsync-len = <58>; - lower-margin = <4>; - upper-margin = <4>; - vsync-len = <4>; - hsync-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 2 0>; - nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ - nvidia,panel-timings = <400 4 203 17 15>; - }; -}; diff --git a/board/nvidia/dts/tegra20-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts deleted file mode 100644 index 1a526ba..0000000 --- a/board/nvidia/dts/tegra20-ventana.dts +++ /dev/null @@ -1,91 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Tegra20 Ventana evaluation board"; - compatible = "nvidia,ventana", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; - }; - - memory { - reg = <0x00000000 0x40000000>; - }; - - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000400 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - }; - - lcd_panel: panel { - clock = <72072000>; - xres = <1366>; - yres = <768>; - left-margin = <58>; - right-margin = <58>; - hsync-len = <58>; - lower-margin = <4>; - upper-margin = <4>; - vsync-len = <4>; - hsync-active-high; - vsync-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 2 0>; - nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ - nvidia,panel-timings = <0 0 200 0 0>; - }; -}; diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts deleted file mode 100644 index eb92264..0000000 --- a/board/nvidia/dts/tegra20-whistler.dts +++ /dev/null @@ -1,73 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Tegra20 Whistler evaluation board"; - compatible = "nvidia,whistler", "nvidia,tegra20"; - - aliases { - i2c0 = "/i2c@7000d000"; - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; - }; - - memory { - device_type = "memory"; - reg = < 0x00000000 0x20000000 >; - }; - - serial@70006000 { - clock-frequency = < 216000000 >; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - clock-frequency = <100000>; - - pmic@3c { - compatible = "maxim,max8907b"; - reg = <0x3c>; - - clk_32k: clock { - compatible = "fixed-clock"; - /* - * leave out for now due to CPP: - * #clock-cells = <0>; - */ - clock-frequency = <32768>; - }; - }; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000400 { - status = "okay"; - wp-gpios = <&gpio 173 0>; /* gpio PV5 */ - bus-width = <8>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - }; -}; diff --git a/board/nvidia/dts/tegra30-beaver.dts b/board/nvidia/dts/tegra30-beaver.dts deleted file mode 100644 index a7cc93e..0000000 --- a/board/nvidia/dts/tegra30-beaver.dts +++ /dev/null @@ -1,77 +0,0 @@ -/dts-v1/; - -#include "tegra30.dtsi" - -/ { - model = "NVIDIA Beaver"; - compatible = "nvidia,beaver", "nvidia,tegra30"; - - aliases { - i2c0 = "/i2c@7000d000"; - i2c1 = "/i2c@7000c000"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000000"; - usb0 = "/usb@7d008000"; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x7ff00000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - }; - - spi@7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - spi-flash@1 { - compatible = "winbond,w25q32"; - reg = <1>; - spi-max-frequency = <20000000>; - }; - }; - - sdhci@78000000 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ - bus-width = <4>; - }; - - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - usb@7d008000 { - nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */ - status = "okay"; - }; -}; diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts deleted file mode 100644 index ea2cf76..0000000 --- a/board/nvidia/dts/tegra30-cardhu.dts +++ /dev/null @@ -1,72 +0,0 @@ -/dts-v1/; - -#include "tegra30.dtsi" - -/ { - model = "NVIDIA Cardhu"; - compatible = "nvidia,cardhu", "nvidia,tegra30"; - - aliases { - i2c0 = "/i2c@7000d000"; - i2c1 = "/i2c@7000c000"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000000"; - usb0 = "/usb@7d008000"; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - }; - - spi@7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - }; - - sdhci@78000000 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ - bus-width = <4>; - }; - - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - usb@7d008000 { - nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */ - status = "okay"; - }; -}; diff --git a/board/nvidia/venice2/Makefile b/board/nvidia/venice2/Makefile new file mode 100644 index 0000000..5fac5ab --- /dev/null +++ b/board/nvidia/venice2/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2013-2014 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += as3722_init.o +obj-y += venice2.o diff --git a/board/nvidia/venice2/as3722_init.c b/board/nvidia/venice2/as3722_init.c new file mode 100644 index 0000000..960fea7 --- /dev/null +++ b/board/nvidia/venice2/as3722_init.c @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch-tegra/tegra_i2c.h> +#include "as3722_init.h" + +/* AS3722-PMIC-specific early init code - get CPU rails up, etc */ + +void tegra_i2c_ll_write_addr(uint addr, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(addr, ®->cmd_addr0); + writel(config, ®->cnfg); +} + +void tegra_i2c_ll_write_data(uint data, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(data, ®->cmd_data1); + writel(config, ®->cnfg); +} + +void pmic_enable_cpu_vdd(void) +{ + debug("%s entry\n", __func__); + + /* Don't need to set up VDD_CORE - already done - by OTP */ + + debug("%s: Setting VDD_CPU to 1.0V via AS3722 reg 0/4D\n", __func__); + /* + * Bring up VDD_CPU via the AS3722 PMIC on the PWR I2C bus. + * First set VDD to 1.0V, then enable the VDD regulator. + */ + tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2); + tegra_i2c_ll_write_data(AS3722_SD0VOLTAGE_DATA, I2C_SEND_2_BYTES); + /* + * Don't write SDCONTROL - it's already 0x7F, i.e. all SDs enabled. + * tegra_i2c_ll_write_data(AS3722_SD0CONTROL_DATA, I2C_SEND_2_BYTES); + */ + udelay(10 * 1000); + + debug("%s: Setting VDD_GPU to 1.0V via AS3722 reg 6/4D\n", __func__); + /* + * Bring up VDD_GPU via the AS3722 PMIC on the PWR I2C bus. + * First set VDD to 1.0V, then enable the VDD regulator. + */ + tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2); + tegra_i2c_ll_write_data(AS3722_SD6VOLTAGE_DATA, I2C_SEND_2_BYTES); + /* + * Don't write SDCONTROL - it's already 0x7F, i.e. all SDs enabled. + * tegra_i2c_ll_write_data(AS3722_SD6CONTROL_DATA, I2C_SEND_2_BYTES); + */ + udelay(10 * 1000); + + debug("%s: Set VPP_FUSE to 1.2V via AS3722 reg 0x12/4E\n", __func__); + /* + * Bring up VPP_FUSE via the AS3722 PMIC on the PWR I2C bus. + * First set VDD to 1.2V, then enable the VDD regulator. + */ + tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2); + tegra_i2c_ll_write_data(AS3722_LDO2VOLTAGE_DATA, I2C_SEND_2_BYTES); + /* + * Don't write LDCONTROL - it's already 0xFF, i.e. all LDOs enabled. + * tegra_i2c_ll_write_data(AS3722_LDO2CONTROL_DATA, I2C_SEND_2_BYTES); + */ + udelay(10 * 1000); + + debug("%s: Set VDD_SDMMC to 3.3V via AS3722 reg 0x16/4E\n", __func__); + /* + * Bring up VDD_SDMMC via the AS3722 PMIC on the PWR I2C bus. + * First set it to bypass 3.3V straight thru, then enable the regulator + * + * NOTE: We do this early because doing it later seems to hose the CPU + * power rail/partition startup. Need to debug. + */ + tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2); + tegra_i2c_ll_write_data(AS3722_LDO6VOLTAGE_DATA, I2C_SEND_2_BYTES); + /* + * Don't write LDCONTROL - it's already 0xFF, i.e. all LDOs enabled. + * tegra_i2c_ll_write_data(AS3722_LDO6CONTROL_DATA, I2C_SEND_2_BYTES); + */ + udelay(10 * 1000); +} diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h new file mode 100644 index 0000000..2a9e7cd --- /dev/null +++ b/board/nvidia/venice2/as3722_init.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* AS3722-PMIC-specific early init regs */ + +#define AS3722_I2C_ADDR 0x80 + +#define AS3722_SD0VOLTAGE_REG 0x00 /* CPU */ +#define AS3722_SD1VOLTAGE_REG 0x01 /* CORE, already set by OTP */ +#define AS3722_SD6VOLTAGE_REG 0x06 /* GPU */ +#define AS3722_SDCONTROL_REG 0x4D + +#define AS3722_LDO2VOLTAGE_REG 0x12 /* VPP_FUSE */ +#define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */ +#define AS3722_LDCONTROL_REG 0x4E + +#define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG) +#define AS3722_SD0CONTROL_DATA (0x0100 | AS3722_SDCONTROL_REG) + +#define AS3722_SD1VOLTAGE_DATA (0x3200 | AS3722_SD1VOLTAGE_REG) +#define AS3722_SD1CONTROL_DATA (0x0200 | AS3722_SDCONTROL_REG) + +#define AS3722_SD6CONTROL_DATA (0x4000 | AS3722_SDCONTROL_REG) +#define AS3722_SD6VOLTAGE_DATA (0x2800 | AS3722_SD6VOLTAGE_REG) + +#define AS3722_LDO2CONTROL_DATA (0x0400 | AS3722_LDCONTROL_REG) +#define AS3722_LDO2VOLTAGE_DATA (0x1000 | AS3722_LDO2VOLTAGE_REG) + +#define AS3722_LDO6CONTROL_DATA (0x4000 | AS3722_LDCONTROL_REG) +#define AS3722_LDO6VOLTAGE_DATA (0x3F00 | AS3722_LDO6VOLTAGE_REG) + +#define I2C_SEND_2_BYTES 0x0A02 + +void pmic_enable_cpu_vdd(void); diff --git a/board/nvidia/venice2/pinmux-config-venice2.h b/board/nvidia/venice2/pinmux-config-venice2.h new file mode 100644 index 0000000..50868e6 --- /dev/null +++ b/board/nvidia/venice2/pinmux-config-venice2.h @@ -0,0 +1,339 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PINMUX_CONFIG_VENICE2_H_ +#define _PINMUX_CONFIG_VENICE2_H_ + +#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_DEFAULT, \ + .od = PMUX_PIN_OD_DEFAULT, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_##_od, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define DDC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _rcv_sel) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define VI_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_DEFAULT, \ + .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ + } + +#define CEC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_##_od, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define USB_PINMUX CEC_PINMUX + +#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ + { \ + .padgrp = PDRIVE_PINGROUP_##_padgrp, \ + .slwf = _slwf, \ + .slwr = _slwr, \ + .drvup = _drvup, \ + .drvdn = _drvdn, \ + .lpmd = PGRP_LPMD_##_lpmd, \ + .schmt = PGRP_SCHMT_##_schmt, \ + .hsm = PGRP_HSM_##_hsm, \ + } + +static struct pingroup_config tegra124_pinmux_common[] = { + /* EXTPERIPH1 pinmux */ + DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, OUTPUT), + + /* I2S0 pinmux */ + DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT), + + /* I2S1 pinmux */ + DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT), + + /* I2S3 pinmux */ + DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT), + + /* CLDVFS pinmux */ + DEFAULT_PINMUX(DVFS_PWM, CLDVFS, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(DVFS_CLK, CLDVFS, NORMAL, NORMAL, OUTPUT), + + /* ULPI pinmux */ + DEFAULT_PINMUX(ULPI_DATA0, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA1, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA2, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA3, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA4, ULPI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA5, ULPI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA6, ULPI, NORMAL, NORMAL, INPUT), + + /* EC KBC/SPI */ + DEFAULT_PINMUX(ULPI_CLK, SPI1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DIR, SPI1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_NXT, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_STP, SPI1, NORMAL, NORMAL, INPUT), + + /* I2C3 (TPM) pinmux */ + I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* I2C2 pinmux */ + I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* UARTD pinmux (UART4 on Servo board, unused) */ + DEFAULT_PINMUX(GPIO_PJ7, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PB0, UARTD, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PB1, UARTD, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PK7, UARTD, NORMAL, NORMAL, OUTPUT), + + /* SPI4 (Winbond 'boot ROM') */ + DEFAULT_PINMUX(GPIO_PG5, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG6, SPI4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG7, SPI4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PI3, SPI4, NORMAL, NORMAL, INPUT), + + /* Touch IRQ */ + DEFAULT_PINMUX(GPIO_W3_AUD, RSVD1, NORMAL, NORMAL, INPUT), + + /* PWM1 pinmux */ + DEFAULT_PINMUX(GPIO_PH1, PWM1, NORMAL, NORMAL, OUTPUT), + + /* SDMMC1 pinmux */ + DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT), + + /* SDMMC3 pinmux */ + DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, UP, TRISTATE, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, DOWN, NORMAL, INPUT), + + /* SDMMC4 pinmux */ + DEFAULT_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT), + + /* BLINK pinmux */ + DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT), + + /* KBC pinmux */ + DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT), + + /* Misc */ + DEFAULT_PINMUX(GPIO_PV0, RSVD1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(KB_ROW7, RSVD1, UP, NORMAL, INPUT), + + /* UARTA pinmux (BR_UART_TXD/RXD on Servo board) */ + DEFAULT_PINMUX(KB_ROW9, UARTA, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_ROW10, UARTA, UP, TRISTATE, INPUT), + + /* I2CPWR pinmux (I2C5) */ + I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* RTCK pinmux */ + DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, INPUT), + + /* CLK pinmux */ + DEFAULT_PINMUX(CLK_32K_IN, CLK, NORMAL, TRISTATE, INPUT), + + /* PWRON pinmux */ + DEFAULT_PINMUX(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT), + + /* CPU pinmux */ + DEFAULT_PINMUX(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT), + + /* PMI pinmux */ + DEFAULT_PINMUX(PWR_INT_N, PMI, NORMAL, TRISTATE, INPUT), + + /* RESET_OUT_N pinmux */ + DEFAULT_PINMUX(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT), + + /* EXTPERIPH3 pinmux */ + DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), + + /* I2C1 pinmux */ + I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* UARTB, GPS */ + DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT), + + /* UARTC (WIFI/BT) */ + DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT), + + /* CEC pinmux */ + CEC_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* I2C4 (HDMI_DDC) pinmux */ + DDC_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH), + DDC_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH), + + /* USB pinmux */ + USB_PINMUX(USB_VBUS_EN0, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE), + USB_PINMUX(USB_VBUS_EN1, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE), + + /* Unused, marked SNN_ on schematic, TRISTATE 'em */ + DEFAULT_PINMUX(GPIO_PBB0, RSVD3, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB3, RSVD3, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB4, RSVD3, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB5, RSVD2, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB6, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB7, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PCC2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PH3, GMI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PI7, GMI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PJ2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_X5_AUD, RSVD3, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_X6_AUD, GMI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PFF2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(USB_VBUS_EN2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_COL5, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW3, KBC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW5, RSVD2, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW6, KBC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW13, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW14, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW16, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(OWR, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(ULPI_DATA7, ULPI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP3_DIN, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP3_FS, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP3_SCLK, RSVD2, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(CLK2_OUT, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(SDMMC1_WP_N, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(CAM_MCLK, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(CLK3_REQ, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(SPDIF_OUT, RSVD1, NORMAL, TRISTATE, INPUT), +}; + +static struct pingroup_config unused_pins_lowpower[] = { + DEFAULT_PINMUX(CLK1_REQ, RSVD3, DOWN, TRISTATE, OUTPUT), +}; + +/* Initially setting all used GPIO's to non-TRISTATE */ +static struct pingroup_config tegra124_pinmux_set_nontristate[] = { + DEFAULT_PINMUX(GPIO_X4_AUD, RSVD1, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_X7_AUD, RSVD1, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X3_AUD, RSVD3, UP, NORMAL, INPUT), + + /* EN_VDD_BL */ + DEFAULT_PINMUX(DAP3_DOUT, I2S2, DOWN, NORMAL, OUTPUT), + + /* MODEM */ + DEFAULT_PINMUX(GPIO_PV0, RSVD3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PV1, RSVD1, NORMAL, NORMAL, INPUT), + + /* BOOT_SEL0-3 */ + DEFAULT_PINMUX(GPIO_PG0, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG1, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG2, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG3, GMI, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(CLK2_REQ, RSVD3, NORMAL, NORMAL, OUTPUT), + + DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_COL4, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_ROW4, KBC, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(GPIO_PU4, RSVD3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU5, RSVD3, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU6, RSVD3, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(HDMI_INT, RSVD1, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(SPDIF_IN, USB, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT), + + /* TS_SHDN_L */ + DEFAULT_PINMUX(GPIO_PK1, GMI, NORMAL, NORMAL, OUTPUT), +}; + +static struct padctrl_config venice2_padctrl[] = { + /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */ + DEFAULT_PADCFG(SDIO3, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, + SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, NONE, NONE), +}; +#endif /* PINMUX_CONFIG_VENICE2_H */ diff --git a/board/nvidia/venice2/venice2.c b/board/nvidia/venice2/venice2.c new file mode 100644 index 0000000..1ed2fd7 --- /dev/null +++ b/board/nvidia/venice2/venice2.c @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2013-2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm-generic/gpio.h> +#include <asm/arch/gpio.h> +#include <asm/arch/gp_padctrl.h> +#include <asm/arch/pinmux.h> +#include "pinmux-config-venice2.h" +#include <i2c.h> + +/* + * Routine: pinmux_init + * Description: Do individual peripheral pinmux configs + */ +void pinmux_init(void) +{ + pinmux_config_table(tegra124_pinmux_set_nontristate, + ARRAY_SIZE(tegra124_pinmux_set_nontristate)); + + pinmux_config_table(tegra124_pinmux_common, + ARRAY_SIZE(tegra124_pinmux_common)); + + pinmux_config_table(unused_pins_lowpower, + ARRAY_SIZE(unused_pins_lowpower)); + + /* Initialize any non-default pad configs (APB_MISC_GP regs) */ + padgrp_config_table(venice2_padctrl, ARRAY_SIZE(venice2_padctrl)); +} diff --git a/board/pcs440ep/config.mk b/board/pcs440ep/config.mk index 1e76128..b90d5d0 100644 --- a/board/pcs440ep/config.mk +++ b/board/pcs440ep/config.mk @@ -10,7 +10,7 @@ # # Check the U-Boot Image with a SHA1 checksum -ALL-y += $(obj)u-boot.sha1 +ALL-y += u-boot.sha1 PLATFORM_CPPFLAGS += -DCONFIG_440=1 diff --git a/board/pr1/config.mk b/board/pr1/config.mk index 5c18d5c..2436ec0 100644 --- a/board/pr1/config.mk +++ b/board/pr1/config.mk @@ -9,6 +9,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile index 22bd6b1..7d2bb8c 100644 --- a/board/samsung/common/Makefile +++ b/board/samsung/common/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o obj-$(CONFIG_THOR_FUNCTION) += thor.o obj-$(CONFIG_CMD_USB_MASS_STORAGE) += ums.o +obj-$(CONFIG_MISC_COMMON) += misc.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_BOARD_COMMON) += board.o diff --git a/board/samsung/common/dfu_sample_env.txt b/board/samsung/common/dfu_sample_env.txt new file mode 100644 index 0000000..d6ee8a2 --- /dev/null +++ b/board/samsung/common/dfu_sample_env.txt @@ -0,0 +1,9 @@ +mmcboot=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} ${rootfstype} rootwait ${console}; run loaduimage; bootm 0x40007FC0 +rootfstype=ext4 +loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage +mmcdev=0 +mmcbootpart=2 +mmcrootpart=5 +console=console=ttySAC2,115200n8 +bootcmd=run mmcboot +dfu_alt_info=u-boot mmc 80 800;params.bin mmc 0x38 0x8;uImage ext4 0 2 diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c new file mode 100644 index 0000000..eb15739 --- /dev/null +++ b/board/samsung/common/misc.c @@ -0,0 +1,411 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <lcd.h> +#include <libtizen.h> +#include <samsung/misc.h> +#include <errno.h> +#include <version.h> +#include <asm/sizes.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/gpio.h> +#include <linux/input.h> +#include <power/pmic.h> +#include <mmc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +void set_board_info(void) +{ + char info[64]; + + snprintf(info, ARRAY_SIZE(info), "%d.%d", s5p_cpu_rev & 0x0f, + (s5p_cpu_rev & 0xf0) >> 0x04); + setenv("soc_rev", info); + + snprintf(info, ARRAY_SIZE(info), "%x", s5p_cpu_id); + setenv("soc_id", info); + +#ifdef CONFIG_REVISION_TAG + snprintf(info, ARRAY_SIZE(info), "%x", get_board_rev()); + setenv("board_rev", info); +#endif +#ifdef CONFIG_OF_LIBFDT + snprintf(info, ARRAY_SIZE(info), "%s%x-%s.dtb", + CONFIG_SYS_SOC, s5p_cpu_id, CONFIG_SYS_BOARD); + setenv("fdtfile", info); +#endif +} +#endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */ + +#ifdef CONFIG_LCD_MENU +static int power_key_pressed(u32 reg) +{ + struct pmic *pmic; + u32 status; + u32 mask; + + pmic = pmic_get(KEY_PWR_PMIC_NAME); + if (!pmic) { + printf("%s: Not found\n", KEY_PWR_PMIC_NAME); + return 0; + } + + if (pmic_probe(pmic)) + return 0; + + if (reg == KEY_PWR_STATUS_REG) + mask = KEY_PWR_STATUS_MASK; + else + mask = KEY_PWR_INTERRUPT_MASK; + + if (pmic_reg_read(pmic, reg, &status)) + return 0; + + return !!(status & mask); +} + +static int key_pressed(int key) +{ + int value; + + switch (key) { + case KEY_POWER: + value = power_key_pressed(KEY_PWR_INTERRUPT_REG); + break; + case KEY_VOLUMEUP: + value = !gpio_get_value(KEY_VOL_UP_GPIO); + break; + case KEY_VOLUMEDOWN: + value = !gpio_get_value(KEY_VOL_DOWN_GPIO); + break; + default: + value = 0; + break; + } + + return value; +} + +static int check_keys(void) +{ + int keys = 0; + + if (key_pressed(KEY_POWER)) + keys += KEY_POWER; + if (key_pressed(KEY_VOLUMEUP)) + keys += KEY_VOLUMEUP; + if (key_pressed(KEY_VOLUMEDOWN)) + keys += KEY_VOLUMEDOWN; + + return keys; +} + +/* + * 0 BOOT_MODE_INFO + * 1 BOOT_MODE_THOR + * 2 BOOT_MODE_UMS + * 3 BOOT_MODE_DFU + * 4 BOOT_MODE_EXIT + */ +static char * +mode_name[BOOT_MODE_EXIT + 1] = { + "DEVICE", + "THOR", + "UMS", + "DFU", + "EXIT" +}; + +static char * +mode_info[BOOT_MODE_EXIT + 1] = { + "info", + "downloader", + "mass storage", + "firmware update", + "and run normal boot" +}; + +#define MODE_CMD_ARGC 4 + +static char * +mode_cmd[BOOT_MODE_EXIT + 1][MODE_CMD_ARGC] = { + {"", "", "", ""}, + {"thor", "0", "mmc", "0"}, + {"ums", "0", "mmc", "0"}, + {"dfu", "0", "mmc", "0"}, + {"", "", "", ""}, +}; + +static void display_board_info(void) +{ +#ifdef CONFIG_GENERIC_MMC + struct mmc *mmc = find_mmc_device(0); +#endif + vidinfo_t *vid = &panel_info; + + lcd_position_cursor(4, 4); + + lcd_printf("%s\n\t", U_BOOT_VERSION); + lcd_puts("\n\t\tBoard Info:\n"); +#ifdef CONFIG_SYS_BOARD + lcd_printf("\tBoard name: %s\n", CONFIG_SYS_BOARD); +#endif +#ifdef CONFIG_REVISION_TAG + lcd_printf("\tBoard rev: %u\n", get_board_rev()); +#endif + lcd_printf("\tDRAM banks: %u\n", CONFIG_NR_DRAM_BANKS); + lcd_printf("\tDRAM size: %u MB\n", gd->ram_size / SZ_1M); + +#ifdef CONFIG_GENERIC_MMC + if (mmc) { + if (!mmc->capacity) + mmc_init(mmc); + + lcd_printf("\teMMC size: %llu MB\n", mmc->capacity / SZ_1M); + } +#endif + if (vid) + lcd_printf("\tDisplay resolution: %u x % u\n", + vid->vl_col, vid->vl_row); + + lcd_printf("\tDisplay BPP: %u\n", 1 << vid->vl_bpix); +} + +static int mode_leave_menu(int mode) +{ + char *exit_option; + char *exit_boot = "boot"; + char *exit_back = "back"; + cmd_tbl_t *cmd; + int cmd_result; + int cmd_repeatable; + int leave; + + lcd_clear(); + + switch (mode) { + case BOOT_MODE_EXIT: + return 1; + case BOOT_MODE_INFO: + display_board_info(); + exit_option = exit_back; + leave = 0; + break; + default: + cmd = find_cmd(mode_cmd[mode][0]); + if (cmd) { + printf("Enter: %s %s\n", mode_name[mode], + mode_info[mode]); + lcd_printf("\n\n\t%s %s\n", mode_name[mode], + mode_info[mode]); + lcd_puts("\n\tDo not turn off device before finish!\n"); + + cmd_result = cmd_process(0, MODE_CMD_ARGC, + *(mode_cmd + mode), + &cmd_repeatable, NULL); + + if (cmd_result == CMD_RET_SUCCESS) { + printf("Command finished\n"); + lcd_clear(); + lcd_printf("\n\n\t%s finished\n", + mode_name[mode]); + + exit_option = exit_boot; + leave = 1; + } else { + printf("Command error\n"); + lcd_clear(); + lcd_printf("\n\n\t%s command error\n", + mode_name[mode]); + + exit_option = exit_back; + leave = 0; + } + } else { + lcd_puts("\n\n\tThis mode is not supported.\n"); + exit_option = exit_back; + leave = 0; + } + } + + lcd_printf("\n\n\tPress POWER KEY to %s\n", exit_option); + + /* Clear PWR button Rising edge interrupt status flag */ + power_key_pressed(KEY_PWR_INTERRUPT_REG); + + /* Wait for PWR key */ + while (!key_pressed(KEY_POWER)) + mdelay(1); + + lcd_clear(); + return leave; +} + +static void display_download_menu(int mode) +{ + char *selection[BOOT_MODE_EXIT + 1]; + int i; + + for (i = 0; i <= BOOT_MODE_EXIT; i++) + selection[i] = "[ ]"; + + selection[mode] = "[=>]"; + + lcd_clear(); + lcd_printf("\n\t\tDownload Mode Menu\n"); + + for (i = 0; i <= BOOT_MODE_EXIT; i++) + lcd_printf("\t%s %s - %s\n\n", selection[i], + mode_name[i], + mode_info[i]); +} + +static void download_menu(void) +{ + int mode = 0; + int last_mode = 0; + int run; + int key; + + display_download_menu(mode); + + while (1) { + run = 0; + + if (mode != last_mode) + display_download_menu(mode); + + last_mode = mode; + mdelay(100); + + key = check_keys(); + switch (key) { + case KEY_POWER: + run = 1; + break; + case KEY_VOLUMEUP: + if (mode > 0) + mode--; + break; + case KEY_VOLUMEDOWN: + if (mode < BOOT_MODE_EXIT) + mode++; + break; + default: + break; + } + + if (run) { + if (mode_leave_menu(mode)) + break; + + display_download_menu(mode); + } + } + + lcd_clear(); +} + +static void display_mode_info(void) +{ + lcd_position_cursor(4, 4); + lcd_printf("%s\n", U_BOOT_VERSION); + lcd_puts("\nDownload Mode Menu\n"); +#ifdef CONFIG_SYS_BOARD + lcd_printf("Board name: %s\n", CONFIG_SYS_BOARD); +#endif + lcd_printf("Press POWER KEY to display MENU options."); +} + +static int boot_menu(void) +{ + int key = 0; + int timeout = 10; + + display_mode_info(); + + while (timeout--) { + lcd_printf("\rNormal boot will start in: %d seconds.", timeout); + mdelay(1000); + + key = key_pressed(KEY_POWER); + if (key) + break; + } + + lcd_clear(); + + /* If PWR pressed - show download menu */ + if (key) { + printf("Power pressed - go to download menu\n"); + download_menu(); + printf("Download mode exit.\n"); + } + + return 0; +} + +void check_boot_mode(void) +{ + int pwr_key; + + pwr_key = power_key_pressed(KEY_PWR_STATUS_REG); + if (!pwr_key) + return; + + /* Clear PWR button Rising edge interrupt status flag */ + power_key_pressed(KEY_PWR_INTERRUPT_REG); + + if (key_pressed(KEY_VOLUMEUP)) + boot_menu(); + else if (key_pressed(KEY_VOLUMEDOWN)) + mode_leave_menu(BOOT_MODE_THOR); +} + +void keys_init(void) +{ + /* Set direction to input */ + gpio_direction_input(KEY_VOL_UP_GPIO); + gpio_direction_input(KEY_VOL_DOWN_GPIO); +} +#endif /* CONFIG_LCD_MENU */ + +#ifdef CONFIG_CMD_BMP +void draw_logo(void) +{ + int x, y; + ulong addr; + + addr = panel_info.logo_addr; + if (!addr) { + error("There is no logo data."); + return; + } + + if (panel_info.vl_width >= panel_info.logo_width) { + x = ((panel_info.vl_width - panel_info.logo_width) >> 1); + x += panel_info.logo_x_offset; /* For X center align */ + } else { + x = 0; + printf("Warning: image width is bigger than display width\n"); + } + + if (panel_info.vl_height >= panel_info.logo_height) { + y = ((panel_info.vl_height - panel_info.logo_height) >> 1); + y += panel_info.logo_y_offset; /* For Y center align */ + } else { + y = 0; + printf("Warning: image height is bigger than display height\n"); + } + + bmp_display(addr, x, y); +} +#endif /* CONFIG_CMD_BMP */ diff --git a/board/samsung/dts/exynos5250-arndale.dts b/board/samsung/dts/exynos5250-arndale.dts deleted file mode 100644 index 202f2ea..0000000 --- a/board/samsung/dts/exynos5250-arndale.dts +++ /dev/null @@ -1,39 +0,0 @@ -/* - * SAMSUNG Arndale board device tree source - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * SPDX-License-Identifier: GPL-2.0+ -*/ - -/dts-v1/; -#include "exynos5250.dtsi" - -/ { - model = "SAMSUNG Arndale board based on EXYNOS5250"; - compatible = "samsung,arndale", "samsung,exynos5250"; - - aliases { - serial0 = "/serial@12C20000"; - console = "/serial@12C20000"; - }; - - mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - }; - - mmc@12210000 { - status = "disabled"; - }; - - mmc@12220000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - }; - - mmc@12230000 { - status = "disabled"; - }; -}; diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts deleted file mode 100644 index c4ed346..0000000 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ /dev/null @@ -1,151 +0,0 @@ -/* - * SAMSUNG SMDK5250 board device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/dts-v1/; -/include/ "exynos5250.dtsi" - -/ { - model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; - compatible = "samsung,smdk5250", "samsung,exynos5250"; - - aliases { - i2c0 = "/i2c@12c60000"; - i2c1 = "/i2c@12c70000"; - i2c2 = "/i2c@12c80000"; - i2c3 = "/i2c@12c90000"; - i2c4 = "/i2c@12ca0000"; - i2c5 = "/i2c@12cb0000"; - i2c6 = "/i2c@12cc0000"; - i2c7 = "/i2c@12cd0000"; - spi0 = "/spi@12d20000"; - spi1 = "/spi@12d30000"; - spi2 = "/spi@12d40000"; - spi3 = "/spi@131a0000"; - spi4 = "/spi@131b0000"; - mmc0 = "/mmc@12200000"; - mmc1 = "/mmc@12210000"; - mmc2 = "/mmc@12220000"; - mmc3 = "/mmc@12230000"; - serial0 = "/serial@12C30000"; - console = "/serial@12C30000"; - i2s = "/sound@3830000"; - }; - - sromc@12250000 { - bank = <1>; - srom-timing = <1 9 12 1 6 1 1>; - width = <2>; - lan@5000000 { - compatible = "smsc,lan9215", "smsc,lan"; - reg = <0x5000000 0x100>; - phy-mode = "mii"; - }; - }; - - sound@3830000 { - samsung,codec-type = "wm8994"; - }; - - sound@12d60000 { - status = "disabled"; - }; - - i2c@12c70000 { - soundcodec@1a { - reg = <0x1a>; - compatible = "wolfson,wm8994-codec"; - }; - }; - - i2c@12c60000 { - pmic@9 { - reg = <0x9>; - compatible = "maxim,max77686_pmic"; - }; - }; - - tmu@10060000 { - samsung,min-temp = <25>; - samsung,max-temp = <125>; - samsung,start-warning = <95>; - samsung,start-tripping = <105>; - samsung,hw-tripping = <110>; - samsung,efuse-min-value = <40>; - samsung,efuse-value = <55>; - samsung,efuse-max-value = <100>; - samsung,slope = <274761730>; - samsung,dc-value = <25>; - }; - - fimd@14400000 { - samsung,vl-freq = <60>; - samsung,vl-col = <2560>; - samsung,vl-row = <1600>; - samsung,vl-width = <2560>; - samsung,vl-height = <1600>; - - samsung,vl-clkp; - samsung,vl-dp; - samsung,vl-bpix = <4>; - - samsung,vl-hspw = <32>; - samsung,vl-hbpd = <80>; - samsung,vl-hfpd = <48>; - samsung,vl-vspw = <6>; - samsung,vl-vbpd = <37>; - samsung,vl-vfpd = <3>; - samsung,vl-cmd-allow-len = <0xf>; - - samsung,winid = <3>; - samsung,interface-mode = <1>; - samsung,dp-enabled = <1>; - samsung,dual-lcd-enabled = <0>; - }; - - dp@145b0000 { - samsung,lt-status = <0>; - - samsung,master-mode = <0>; - samsung,bist-mode = <0>; - samsung,bist-pattern = <0>; - samsung,h-sync-polarity = <0>; - samsung,v-sync-polarity = <0>; - samsung,interlaced = <0>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - }; - - mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - samsung,removable = <0>; - }; - - mmc@12210000 { - status = "disabled"; - }; - - mmc@12220000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - samsung,removable = <1>; - }; - - mmc@12230000 { - status = "disabled"; - }; - - ehci@12110000 { - samsung,vbus-gpio = <&gpio 0xbe 0>; /* X26 */ - }; -}; diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts deleted file mode 100644 index 091cdb9..0000000 --- a/board/samsung/dts/exynos5250-snow.dts +++ /dev/null @@ -1,187 +0,0 @@ -/* - * SAMSUNG Snow board device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/dts-v1/; -/include/ "exynos5250.dtsi" - -/ { - model = "Google Snow"; - compatible = "google,snow", "samsung,exynos5250"; - - aliases { - i2c0 = "/i2c@12c60000"; - i2c1 = "/i2c@12c70000"; - i2c2 = "/i2c@12c80000"; - i2c3 = "/i2c@12c90000"; - i2c4 = "/i2c@12ca0000"; - i2c5 = "/i2c@12cb0000"; - i2c6 = "/i2c@12cc0000"; - i2c7 = "/i2c@12cd0000"; - spi0 = "/spi@12d20000"; - spi1 = "/spi@12d30000"; - spi2 = "/spi@12d40000"; - spi3 = "/spi@131a0000"; - spi4 = "/spi@131b0000"; - mmc0 = "/mmc@12200000"; - mmc1 = "/mmc@12210000"; - mmc2 = "/mmc@12220000"; - mmc3 = "/mmc@12230000"; - serial0 = "/serial@12C30000"; - console = "/serial@12C30000"; - i2s = "/sound@3830000"; - }; - - i2c4: i2c@12ca0000 { - cros-ec@1e { - reg = <0x1e>; - compatible = "google,cros-ec"; - i2c-max-frequency = <100000>; - ec-interrupt = <&gpio 782 1>; - }; - - power-regulator@48 { - compatible = "ti,tps65090"; - reg = <0x48>; - }; - }; - - spi@131b0000 { - spi-max-frequency = <1000000>; - spi-deactivate-delay = <100>; - cros-ec@0 { - reg = <0>; - compatible = "google,cros-ec"; - spi-max-frequency = <5000000>; - ec-interrupt = <&gpio 782 1>; - optimise-flash-write; - status = "disabled"; - }; - }; - - sound@3830000 { - samsung,codec-type = "max98095"; - codec-enable-gpio = <&gpio 0xb7 0>; - }; - - sound@12d60000 { - status = "disabled"; - }; - - i2c@12cd0000 { - soundcodec@22 { - reg = <0x22>; - compatible = "maxim,max98095-codec"; - }; - }; - - i2c@12c60000 { - pmic@9 { - reg = <0x9>; - compatible = "maxim,max77686_pmic"; - }; - }; - - mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - samsung,removable = <0>; - }; - - mmc@12210000 { - status = "disabled"; - }; - - mmc@12220000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - samsung,removable = <1>; - }; - - mmc@12230000 { - status = "disabled"; - }; - - ehci@12110000 { - samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */ - }; - - xhci@12000000 { - samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */ - }; - - tmu@10060000 { - samsung,min-temp = <25>; - samsung,max-temp = <125>; - samsung,start-warning = <95>; - samsung,start-tripping = <105>; - samsung,hw-tripping = <110>; - samsung,efuse-min-value = <40>; - samsung,efuse-value = <55>; - samsung,efuse-max-value = <100>; - samsung,slope = <274761730>; - samsung,dc-value = <25>; - }; - - cros-ec-keyb { - compatible = "google,cros-ec-keyb"; - google,key-rows = <8>; - google,key-columns = <13>; - google,repeat-delay-ms = <240>; - google,repeat-rate-ms = <30>; - google,ghost-filter; - /* - * Keymap entries take the form of 0xRRCCKKKK where - * RR=Row CC=Column KKKK=Key Code - * The values below are for a US keyboard layout and - * are taken from the Linux driver. Note that the - * 102ND key is not used for US keyboards. - */ - linux,keymap = < - /* CAPSLCK F1 B F10 */ - 0x0001003a 0x0002003b 0x00030030 0x00040044 - /* N = R_ALT ESC */ - 0x00060031 0x0008000d 0x000a0064 0x01010001 - /* F4 G F7 H */ - 0x0102003e 0x01030022 0x01040041 0x01060023 - /* ' F9 BKSPACE L_CTRL */ - 0x01080028 0x01090043 0x010b000e 0x0200001d - /* TAB F3 T F6 */ - 0x0201000f 0x0202003d 0x02030014 0x02040040 - /* ] Y 102ND [ */ - 0x0205001b 0x02060015 0x02070056 0x0208001a - /* F8 GRAVE F2 5 */ - 0x02090042 0x03010029 0x0302003c 0x03030006 - /* F5 6 - \ */ - 0x0304003f 0x03060007 0x0308000c 0x030b002b - /* R_CTRL A D F */ - 0x04000061 0x0401001e 0x04020020 0x04030021 - /* S K J ; */ - 0x0404001f 0x04050025 0x04060024 0x04080027 - /* L ENTER Z C */ - 0x04090026 0x040b001c 0x0501002c 0x0502002e - /* V X , M */ - 0x0503002f 0x0504002d 0x05050033 0x05060032 - /* L_SHIFT / . SPACE */ - 0x0507002a 0x05080035 0x05090034 0x050B0039 - /* 1 3 4 2 */ - 0x06010002 0x06020004 0x06030005 0x06040003 - /* 8 7 0 9 */ - 0x06050009 0x06060008 0x0608000b 0x0609000a - /* L_ALT DOWN RIGHT Q */ - 0x060a0038 0x060b006c 0x060c006a 0x07010010 - /* E R W I */ - 0x07020012 0x07030013 0x07040011 0x07050017 - /* U R_SHIFT P O */ - 0x07060016 0x07070036 0x07080019 0x07090018 - /* UP LEFT */ - 0x070b0067 0x070c0069>; - }; -}; diff --git a/board/samsung/dts/exynos5420-smdk5420.dts b/board/samsung/dts/exynos5420-smdk5420.dts deleted file mode 100644 index d739763..0000000 --- a/board/samsung/dts/exynos5420-smdk5420.dts +++ /dev/null @@ -1,169 +0,0 @@ -/* - * SAMSUNG SMDK5420 board device tree source - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/dts-v1/; -/include/ "exynos5420.dtsi" - -/ { - model = "SAMSUNG SMDK5420 board based on EXYNOS5420"; - compatible = "samsung,smdk5420", "samsung,exynos5"; - - config { - hwid = "smdk5420 TEST A-A 9382"; - }; - - aliases { - i2c0 = "/i2c@12c60000"; - i2c1 = "/i2c@12c70000"; - i2c2 = "/i2c@12c80000"; - i2c3 = "/i2c@12c90000"; - i2c4 = "/i2c@12ca0000"; - i2c5 = "/i2c@12cb0000"; - i2c6 = "/i2c@12cc0000"; - i2c7 = "/i2c@12cd0000"; - i2c8 = "/i2c@12e00000"; - i2c9 = "/i2c@12e10000"; - i2c10 = "/i2c@12e20000"; - spi0 = "/spi@12d20000"; - spi1 = "/spi@12d30000"; - spi2 = "/spi@12d40000"; - spi3 = "/spi@131a0000"; - spi4 = "/spi@131b0000"; - mmc0 = "/mmc@12200000"; - mmc1 = "/mmc@12210000"; - mmc2 = "/mmc@12220000"; - xhci0 = "/xhci@12000000"; - xhci1 = "/xhci@12400000"; - serial0 = "/serial@12C30000"; - console = "/serial@12C30000"; - }; - - tmu@10060000 { - samsung,min-temp = <25>; - samsung,max-temp = <125>; - samsung,start-warning = <95>; - samsung,start-tripping = <105>; - samsung,hw-tripping = <110>; - samsung,efuse-min-value = <40>; - samsung,efuse-value = <55>; - samsung,efuse-max-value = <100>; - samsung,slope = <274761730>; - samsung,dc-value = <25>; - }; - - /* s2mps11 is on i2c bus 4 */ - i2c@12ca0000 { - #address-cells = <1>; - #size-cells = <0>; - pmic@66 { - reg = <0x66>; - compatible = "samsung,s2mps11-pmic"; - }; - }; - - spi@12d20000 { /* spi0 */ - spi-max-frequency = <50000000>; - firmware_storage_spi: flash@0 { - reg = <0>; - }; - }; - - fimd@14400000 { - samsung,vl-freq = <60>; - samsung,vl-col = <2560>; - samsung,vl-row = <1600>; - samsung,vl-width = <2560>; - samsung,vl-height = <1600>; - - samsung,vl-clkp; - samsung,vl-dp; - samsung,vl-bpix = <4>; - - samsung,vl-hspw = <32>; - samsung,vl-hbpd = <80>; - samsung,vl-hfpd = <48>; - samsung,vl-vspw = <6>; - samsung,vl-vbpd = <37>; - samsung,vl-vfpd = <3>; - samsung,vl-cmd-allow-len = <0xf>; - - samsung,winid = <3>; - samsung,interface-mode = <1>; - samsung,dp-enabled = <1>; - samsung,dual-lcd-enabled = <0>; - }; - - sound@3830000 { - samsung,codec-type = "wm8994"; - }; - - i2c@12c70000 { - soundcodec@1a { - reg = <0x1a>; - compatible = "wolfson,wm8994-codec"; - }; - }; - - mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - samsung,removable = <0>; - samsung,pre-init; - }; - - mmc@12210000 { - status = "disabled"; - }; - - mmc@12220000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - samsung,removable = <1>; - }; - - mmc@12230000 { - status = "disabled"; - }; - - fimd@14400000 { - /* sysmmu is not used in U-Boot */ - samsung,disable-sysmmu; - }; - - dp@145b0000 { - samsung,lt-status = <0>; - - samsung,master-mode = <0>; - samsung,bist-mode = <0>; - samsung,bist-pattern = <0>; - samsung,h-sync-polarity = <0>; - samsung,v-sync-polarity = <0>; - samsung,interlaced = <0>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - }; - - dmc { - mem-type = "ddr3"; - }; - - xhci1: xhci@12400000 { - compatible = "samsung,exynos5250-xhci"; - reg = <0x12400000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - - phy { - compatible = "samsung,exynos5250-usb3-phy"; - reg = <0x12500000 0x100>; - }; - }; -}; diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index 366f648..61b9ece 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -13,10 +13,17 @@ #include <usb/s3c_udc.h> #include <asm/arch/cpu.h> #include <power/max8998_pmic.h> +#include <samsung/misc.h> + DECLARE_GLOBAL_DATA_PTR; static struct s5pc110_gpio *s5pc110_gpio; +u32 get_board_rev(void) +{ + return 0; +} + int board_init(void) { /* Set Initial global variables */ @@ -173,3 +180,13 @@ struct s3c_plat_otg_data s5pc110_otg_data = { .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL, }; #endif + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif + return 0; +} +#endif diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile index e8818bf..1add9fe 100644 --- a/board/samsung/origen/Makefile +++ b/board/samsung/origen/Makefile @@ -4,16 +4,19 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SPL_BUILD -obj-y += origen.o -endif - ifdef CONFIG_SPL_BUILD -all: $(OBJTREE)/tools/mk$(BOARD)spl -endif +# necessary to create built-in.o +obj- := __dummy__.o -# Fix ME after we implement hostprogs-y. -ifdef CONFIG_SPL_BUILD -$(OBJTREE)/tools/mk$(BOARD)spl: tools/mkv310_image.c - $(HOSTCC) tools/mkv310_image.c -o $(OBJTREE)/tools/mk$(BOARD)spl +hostprogs-y := tools/mkorigenspl +always := $(hostprogs-y) + +# omit -O2 option to suppress +# warning: dereferencing type-punned pointer will break strict-aliasing rules +# +# TODO: +# Fix the root cause in tools/mkorigenspl.c and delete the following work-around +$(obj)/tools/mkorigenspl: HOSTCFLAGS:=$(filter-out -O2,$(HOSTCFLAGS)) +else +obj-y += origen.o endif diff --git a/board/samsung/origen/tools/mkv310_image.c b/board/samsung/origen/tools/mkorigenspl.c index 3ed20ef..3ed20ef 100644 --- a/board/samsung/origen/tools/mkv310_image.c +++ b/board/samsung/origen/tools/mkorigenspl.c diff --git a/board/samsung/smdk5250/lowlevel_init.S b/board/samsung/smdk5250/lowlevel_init.S deleted file mode 100644 index 9003e2d..0000000 --- a/board/samsung/smdk5250/lowlevel_init.S +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Lowlevel setup for SMDK5250 board based on S5PC520 - * - * Copyright (C) 2012 Samsung Electronics - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - - /* use iRAM stack in bl2 */ - ldr sp, =CONFIG_IRAM_STACK - stmdb r13!, {ip,lr} - - /* check reset status */ - ldr r0, =(EXYNOS5_POWER_BASE + INFORM1_OFFSET) - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* LPA wakeup reset */ - ldr r2, =S5P_CHECK_LPA - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in RAM, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_init - -1: - bl arch_cpu_init - bl tzpc_init - ldmia r13!, {ip,pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup: - /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS5_POWER_BASE + INFORM0_OFFSET) - - /* r1 = physical address of exynos5_cpu_resume function*/ - ldr r1, [r0] - - /* Jump to kernel */ - mov pc, r1 - nop - nop diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 943c29a..a69f73d 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -26,22 +26,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_USB_EHCI_EXYNOS -static int board_usb_vbus_init(void) -{ - struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *) - samsung_get_base_gpio_part1(); - - /* Enable VBUS power switch */ - s5p_gpio_direction_output(&gpio1->x2, 6, 1); - - /* VBUS turn ON time */ - mdelay(3); - - return 0; -} -#endif - #ifdef CONFIG_SOUND_MAX98095 static void board_enable_audio_codec(void) { @@ -56,9 +40,6 @@ static void board_enable_audio_codec(void) int exynos_init(void) { -#ifdef CONFIG_USB_EHCI_EXYNOS - board_usb_vbus_init(); -#endif #ifdef CONFIG_SOUND_MAX98095 board_enable_audio_codec(); #endif diff --git a/board/samsung/smdkv310/Makefile b/board/samsung/smdkv310/Makefile index dbc621b..de0da16 100644 --- a/board/samsung/smdkv310/Makefile +++ b/board/samsung/smdkv310/Makefile @@ -4,16 +4,12 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SPL_BUILD -obj-y += smdkv310.o -endif - ifdef CONFIG_SPL_BUILD -all: $(OBJTREE)/tools/mk$(BOARD)spl -endif +# necessary to create built-in.o +obj- := __dummy__.o -# Fix ME after we implement hostprogs-y. -ifdef CONFIG_SPL_BUILD -$(OBJTREE)/tools/mk$(BOARD)spl: tools/mkv310_image.c - $(HOSTCC) tools/mkv310_image.c -o $(OBJTREE)/tools/mk$(BOARD)spl +hostprogs-y := tools/mksmdkv310spl +always := $(hostprogs-y) +else +obj-y += smdkv310.o endif diff --git a/board/samsung/smdkv310/tools/mkv310_image.c b/board/samsung/smdkv310/tools/mksmdkv310spl.c index 9a64ca6..9a64ca6 100644 --- a/board/samsung/smdkv310/tools/mkv310_image.c +++ b/board/samsung/smdkv310/tools/mksmdkv310spl.c diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 640a193..b725505 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -28,6 +28,7 @@ #include <power/max17042_fg.h> #include <usb.h> #include <usb_mass_storage.h> +#include <samsung/misc.h> #include "setup.h" @@ -742,7 +743,7 @@ vidinfo_t panel_info = { .vl_hsp = CONFIG_SYS_LOW, .vl_vsp = CONFIG_SYS_LOW, .vl_dp = CONFIG_SYS_LOW, - .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */ + .vl_bpix = 4, /* Bits per pixel, 2^4 = 16 */ /* s6e8ax0 Panel infomation */ .vl_hspw = 5, @@ -786,3 +787,21 @@ void init_panel_info(vidinfo_t *vid) setenv("lcdinfo", "lcd=s6e8ax0"); } + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif +#ifdef CONFIG_LCD_MENU + keys_init(); + check_boot_mode(); +#endif +#ifdef CONFIG_CMD_BMP + if (panel_info.logo_on) + draw_logo(); +#endif + return 0; +} +#endif diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index be15357..c17c24d 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -28,6 +28,7 @@ #include <usb.h> #include <usb/s3c_udc.h> #include <usb_mass_storage.h> +#include <samsung/misc.h> DECLARE_GLOBAL_DATA_PTR; @@ -72,15 +73,12 @@ static void check_hw_revision(void) int checkboard(void) { puts("Board:\tTRATS2\n"); + printf("HW Revision:\t0x%04x\n", board_rev); + return 0; } #endif -static void show_hw_revision(void) -{ - printf("HW Revision:\t0x%04x\n", board_rev); -} - u32 get_board_rev(void) { return board_rev; @@ -144,17 +142,17 @@ static void board_init_i2c(void) int get_soft_i2c_scl_pin(void) { if (I2C_ADAP_HWNR) - return exynos4x12_gpio_part2_get_nr(m2, 1); /* I2C9 */ + return exynos4x12_gpio_get(2, m2, 1); /* I2C9 */ else - return exynos4x12_gpio_part1_get_nr(f1, 4); /* I2C8 */ + return exynos4x12_gpio_get(1, f1, 4); /* I2C8 */ } int get_soft_i2c_sda_pin(void) { if (I2C_ADAP_HWNR) - return exynos4x12_gpio_part2_get_nr(m2, 0); /* I2C9 */ + return exynos4x12_gpio_get(2, m2, 0); /* I2C9 */ else - return exynos4x12_gpio_part1_get_nr(f1, 5); /* I2C8 */ + return exynos4x12_gpio_get(1, f1, 5); /* I2C8 */ } #endif @@ -568,7 +566,7 @@ vidinfo_t panel_info = { .vl_hsp = CONFIG_SYS_LOW, .vl_vsp = CONFIG_SYS_LOW, .vl_dp = CONFIG_SYS_LOW, - .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */ + .vl_bpix = 4, /* Bits per pixel, 2^4 = 16 */ /* s6e8ax0 Panel infomation */ .vl_hspw = 5, @@ -618,11 +616,17 @@ void init_panel_info(vidinfo_t *vid) #ifdef CONFIG_MISC_INIT_R int misc_init_r(void) { - setenv("model", "GT-I8800"); - setenv("board", "TRATS2"); - - show_hw_revision(); - +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif +#ifdef CONFIG_LCD_MENU + keys_init(); + check_boot_mode(); +#endif +#ifdef CONFIG_CMD_BMP + if (panel_info.logo_on) + draw_logo(); +#endif return 0; } #endif diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 3feef3f..96da7e0 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -22,6 +22,7 @@ #include <usb/s3c_udc.h> #include <asm/arch/cpu.h> #include <power/max8998_pmic.h> +#include <samsung/misc.h> DECLARE_GLOBAL_DATA_PTR; @@ -446,7 +447,7 @@ vidinfo_t panel_info = { .vl_vsp = CONFIG_SYS_HIGH, .vl_dp = CONFIG_SYS_HIGH, - .vl_bpix = 5, /* Bits per pixel */ + .vl_bpix = 4, /* Bits per pixel */ /* LD9040 LCD Panel */ .vl_hspw = 2, @@ -511,3 +512,21 @@ int board_init(void) return 0; } + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif +#ifdef CONFIG_LCD_MENU + keys_init(); + check_boot_mode(); +#endif +#ifdef CONFIG_CMD_BMP + if (panel_info.logo_on) + draw_logo(); +#endif + return 0; +} +#endif diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile index f890008..ce29b41 100644 --- a/board/sandburst/karef/Makefile +++ b/board/sandburst/karef/Makefile @@ -10,11 +10,7 @@ # # TBS: add for debugging purposes -BUILDUSER := $(shell whoami) -FORCEBUILD := $(shell rm -f karef.o) - -CFLAGS += -DBUILDUSER='"$(BUILDUSER)"' -# TBS: end debugging +ccflags-y += -DBUILDUSER='"$(shell whoami)"' obj-y = karef.o ../common/flash.o ../common/sb_common.o extra-y += init.o diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile index 37d91a5..2c1028b 100644 --- a/board/sandburst/metrobox/Makefile +++ b/board/sandburst/metrobox/Makefile @@ -9,11 +9,7 @@ # # TBS: add for debugging purposes -BUILDUSER := $(shell whoami) -FORCEBUILD := $(shell rm -f metrobox.o) - -CFLAGS += -DBUILDUSER='"$(BUILDUSER)"' -# TBS: end debugging +ccflags-y += -DBUILDUSER='"$(shell whoami)"' obj-y = metrobox.o ../common/flash.o ../common/sb_common.o extra-y += init.o diff --git a/board/solidrun/hummingboard/hummingboard.c b/board/solidrun/hummingboard/hummingboard.c index 8b309b4..2e2fb2a 100644 --- a/board/solidrun/hummingboard/hummingboard.c +++ b/board/solidrun/hummingboard/hummingboard.c @@ -156,11 +156,7 @@ int board_eth_init(bd_t *bis) setup_iomux_enet(); - ret = cpu_eth_init(bis); - if (ret) - printf("FEC MXC: %s:failed\n", __func__); - - return ret; + return cpu_eth_init(bis); } #endif diff --git a/board/spear/common/Makefile b/board/spear/common/Makefile index 08dc09f..b0ba320 100644 --- a/board/spear/common/Makefile +++ b/board/spear/common/Makefile @@ -5,7 +5,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_BUILD +# necessary to create built-in.o +obj- := __dummy__.o +else obj-y := spr_misc.o obj-y += spr_lowlevel_init.o endif diff --git a/board/spear/x600/Makefile b/board/spear/x600/Makefile index f9053fe..18d3dd2 100644 --- a/board/spear/x600/Makefile +++ b/board/spear/x600/Makefile @@ -5,6 +5,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_BUILD +# necessary to create built-in.o +obj- := __dummy__.o +else obj-y := fpga.o x600.o endif diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile index 6867a70..f0605e2 100644 --- a/board/st-ericsson/snowball/Makefile +++ b/board/st-ericsson/snowball/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS += -D__RELEASE -D__STN_8500 +ccflags-y += -D__RELEASE -D__STN_8500 obj-y := snowball.o diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile index b9dfbe9..d6c4280 100644 --- a/board/st-ericsson/u8500/Makefile +++ b/board/st-ericsson/u8500/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS += -D__RELEASE -D__STN_8500 +ccflags-y += -D__RELEASE -D__STN_8500 obj-y := u8500_href.o gpio.o diff --git a/board/synopsys/axs101/axs101.c b/board/synopsys/axs101/axs101.c index 4dbeaea..d1271ff 100644 --- a/board/synopsys/axs101/axs101.c +++ b/board/synopsys/axs101/axs101.c @@ -36,7 +36,7 @@ int board_mmc_init(bd_t *bis) int board_eth_init(bd_t *bis) { - if (designware_initialize(0, ARC_DWGMAC_BASE, 0, + if (designware_initialize(ARC_DWGMAC_BASE, PHY_INTERFACE_MODE_RGMII) >= 0) return 1; diff --git a/board/tcm-bf518/config.mk b/board/tcm-bf518/config.mk index f1ef9bf..0d3df2d 100644 --- a/board/tcm-bf518/config.mk +++ b/board/tcm-bf518/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/tcm-bf537/config.mk b/board/tcm-bf537/config.mk index 973d357..97eaafe 100644 --- a/board/tcm-bf537/config.mk +++ b/board/tcm-bf537/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index ed87cd9..4e6846a 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -188,7 +188,7 @@ const struct ctrl_ioregs ioregs_ddr3 = { .dt1ioctl = DDR3_DATA0_IOCTRL_VALUE, .dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE, .dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE, - .emif_sdram_config_ext = 0x0043, + .emif_sdram_config_ext = 0x0143, }; const struct emif_regs ddr3_emif_regs_400Mhz = { diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c index 810b194..f96c56f 100644 --- a/board/ti/am43xx/mux.c +++ b/board/ti/am43xx/mux.c @@ -38,6 +38,16 @@ static struct module_pin_mux gpio0_22_pin_mux[] = { {-1}, }; +static struct module_pin_mux qspi_pin_mux[] = { + {OFFSET(gpmc_csn0), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_CS0 */ + {OFFSET(gpmc_csn3), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* QSPI_CLK */ + {OFFSET(gpmc_advn_ale), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D0 */ + {OFFSET(gpmc_oen_ren), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D1 */ + {OFFSET(gpmc_wen), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D2 */ + {OFFSET(gpmc_be0n_cle), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D3 */ + {-1}, +}; + void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); @@ -50,6 +60,7 @@ void enable_board_pin_mux(void) if (board_is_gpevm()) configure_module_pin_mux(gpio0_22_pin_mux); + configure_module_pin_mux(qspi_pin_mux); } void enable_i2c0_pin_mux(void) diff --git a/board/ti/dra7xx/README b/board/ti/dra7xx/README new file mode 100644 index 0000000..2fdaeac --- /dev/null +++ b/board/ti/dra7xx/README @@ -0,0 +1,25 @@ +Summary +======= + +This document covers various features of the 'dra7xx_evm' build and some +related uses. + +eMMC boot partition use +======================= + +It is possible, depending on SYSBOOT configuration to boot from the eMMC +boot partitions using (name depending on documentation referenced) +Alternative Boot operation mode or Boot Sequence Option 1/2. In this +example we load MLO and u-boot.img from the build into DDR and then use +'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to +set boot0 as the boot device. +U-Boot # setenv autoload no +U-Boot # usb start +U-Boot # dhcp +U-Boot # mmc dev 1 1 +U-Boot # tftp ${loadaddr} dra7xx/MLO +U-Boot # mmc write ${loadaddr} 0 100 +U-Boot # tftp ${loadaddr} dra7xx/u-boot.img +U-Boot # mmc write ${loadaddr} 300 400 +U-Boot # mmc bootbus 1 2 0 2 +U-Boot # mmc partconf 1 1 1 0 diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 1b60b8f..bed8285 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -12,6 +12,7 @@ */ #include <common.h> #include <palmas.h> +#include <sata.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sata.h> @@ -80,7 +81,7 @@ int board_init(void) int board_late_init(void) { - omap_sata_init(); + init_sata(0); return 0; } diff --git a/board/ti/omap5_uevm/README b/board/ti/omap5_uevm/README new file mode 100644 index 0000000..970e2ec --- /dev/null +++ b/board/ti/omap5_uevm/README @@ -0,0 +1,25 @@ +Summary +======= + +This document covers various features of the 'omap5_uevm' build and some +related uses. + +eMMC boot partition use +======================= + +It is possible, depending on SYSBOOT configuration to boot from the eMMC +boot partitions using (name depending on documentation referenced) +Alternative Boot operation mode or Boot Sequence Option 1/2. In this +example we load MLO and u-boot.img from the build into DDR and then use +'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to +set boot0 as the boot device. +U-Boot # setenv autoload no +U-Boot # usb start +U-Boot # dhcp +U-Boot # mmc dev 1 1 +U-Boot # tftp ${loadaddr} omap5uevm/MLO +U-Boot # mmc write ${loadaddr} 0 100 +U-Boot # tftp ${loadaddr} omap5uevm/u-boot.img +U-Boot # mmc write ${loadaddr} 300 400 +U-Boot # mmc bootbus 1 2 0 2 +U-Boot # mmc partconf 1 1 1 0 diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index af854da..3eaa5ac 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -15,6 +15,7 @@ #include "mux_data.h" #if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP) +#include <sata.h> #include <usb.h> #include <asm/gpio.h> #include <asm/arch/clock.h> @@ -70,7 +71,7 @@ int board_init(void) int board_late_init(void) { - omap_sata_init(); + init_sata(0); return 0; } @@ -157,19 +158,6 @@ void set_muxconf_regs_essential(void) sizeof(struct pad_conf_entry)); } -void set_muxconf_regs_non_essential(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_non_essential, - sizeof(core_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_non_essential, - sizeof(wkup_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); -} - #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h index 31ce363..de7ce9f 100644 --- a/board/ti/omap5_uevm/mux_data.h +++ b/board/ti/omap5_uevm/mux_data.h @@ -55,238 +55,4 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = { }; -const struct pad_conf_entry core_padconf_array_non_essential[] = { - - {C2C_DATAIN0, (IEN | M0)}, /* C2C_DATAIN0 */ - {C2C_DATAIN1, (IEN | M0)}, /* C2C_DATAIN1 */ - {C2C_DATAIN2, (IEN | M0)}, /* C2C_DATAIN2 */ - {C2C_DATAIN3, (IEN | M0)}, /* C2C_DATAIN3 */ - {C2C_DATAIN4, (IEN | M0)}, /* C2C_DATAIN4 */ - {C2C_DATAIN5, (IEN | M0)}, /* C2C_DATAIN5 */ - {C2C_DATAIN6, (IEN | M0)}, /* C2C_DATAIN6 */ - {C2C_DATAIN7, (IEN | M0)}, /* C2C_DATAIN7 */ - {C2C_CLKIN1, (IEN | M0)}, /* C2C_CLKIN1 */ - {C2C_CLKIN0, (IEN | M0)}, /* C2C_CLKIN0 */ - {C2C_CLKOUT0, (M0)}, /* C2C_CLKOUT0 */ - {C2C_CLKOUT1, (M0)}, /* C2C_CLKOUT1 */ - {C2C_DATAOUT0, (M0)}, /* C2C_DATAOUT0 */ - {C2C_DATAOUT1, (M0)}, /* C2C_DATAOUT1 */ - {C2C_DATAOUT2, (M0)}, /* C2C_DATAOUT2 */ - {C2C_DATAOUT3, (M0)}, /* C2C_DATAOUT3 */ - {C2C_DATAOUT4, (M0)}, /* C2C_DATAOUT4 */ - {C2C_DATAOUT5, (M0)}, /* C2C_DATAOUT5 */ - {C2C_DATAOUT6, (M0)}, /* C2C_DATAOUT6 */ - {C2C_DATAOUT7, (M0)}, /* C2C_DATAOUT7 */ - {C2C_DATA8, (IEN | M0)}, /* C2C_DATA8 */ - {C2C_DATA9, (IEN | M0)}, /* C2C_DATA9 */ - {C2C_DATA10, (IEN | M0)}, /* C2C_DATA10 */ - {C2C_DATA11, (IEN | M0)}, /* C2C_DATA11 */ - {C2C_DATA12, (IEN | M0)}, /* C2C_DATA12 */ - {C2C_DATA13, (IEN | M0)}, /* C2C_DATA13 */ - {C2C_DATA14, (IEN | M0)}, /* C2C_DATA14 */ - {C2C_DATA15, (IEN | M0)}, /* C2C_DATA15 */ - {LLIB_WAKEREQOUT, (PTU | IEN | M6)}, /* GPIO2_32 */ - {LLIA_WAKEREQOUT, (M1)}, /* C2C_WAKEREQOUT */ - {HSI1_ACREADY, (PTD | M6)}, /* GPIO3_64 */ - {HSI1_CAREADY, (PTD | M6)}, /* GPIO3_65 */ - {HSI1_ACWAKE, (PTD | IEN | M6)}, /* GPIO3_66 */ - {HSI1_CAWAKE, (PTU | IEN | M6)}, /* GPIO3_67 */ - {HSI1_ACFLAG, (PTD | IEN | M6)}, /* GPIO3_68 */ - {HSI1_ACDATA, (PTD | M6)}, /* GPIO3_69 */ - {HSI1_CAFLAG, (M6)}, /* GPIO3_70 */ - {HSI1_CADATA, (M6)}, /* GPIO3_71 */ - {UART1_TX, (M0)}, /* UART1_TX */ - {UART1_CTS, (PTU | IEN | M0)}, /* UART1_CTS */ - {UART1_RX, (PTU | IEN | M0)}, /* UART1_RX */ - {UART1_RTS, (M0)}, /* UART1_RTS */ - {HSI2_CAREADY, (IEN | M0)}, /* HSI2_CAREADY */ - {HSI2_ACREADY, (OFF_EN | M0)}, /* HSI2_ACREADY */ - {HSI2_CAWAKE, (IEN | PTD | M0)}, /* HSI2_CAWAKE */ - {HSI2_ACWAKE, (M0)}, /* HSI2_ACWAKE */ - {HSI2_CAFLAG, (IEN | PTD | M0)}, /* HSI2_CAFLAG */ - {HSI2_CADATA, (IEN | PTD | M0)}, /* HSI2_CADATA */ - {HSI2_ACFLAG, (M0)}, /* HSI2_ACFLAG */ - {HSI2_ACDATA, (M0)}, /* HSI2_ACDATA */ - {UART2_RTS, (IEN | M1)}, /* MCSPI3_SOMI */ - {UART2_CTS, (IEN | M1)}, /* MCSPI3_CS0 */ - {UART2_RX, (IEN | M1)}, /* MCSPI3_SIMO */ - {UART2_TX, (IEN | M1)}, /* MCSPI3_CLK */ - {TIMER10_PWM_EVT, (IEN | M0)}, /* TIMER10_PWM_EVT */ - {DSIPORTA_TE0, (IEN | M0)}, /* DSIPORTA_TE0 */ - {DSIPORTA_LANE0X, (IEN | M0)}, /* DSIPORTA_LANE0X */ - {DSIPORTA_LANE0Y, (IEN | M0)}, /* DSIPORTA_LANE0Y */ - {DSIPORTA_LANE1X, (IEN | M0)}, /* DSIPORTA_LANE1X */ - {DSIPORTA_LANE1Y, (IEN | M0)}, /* DSIPORTA_LANE1Y */ - {DSIPORTA_LANE2X, (IEN | M0)}, /* DSIPORTA_LANE2X */ - {DSIPORTA_LANE2Y, (IEN | M0)}, /* DSIPORTA_LANE2Y */ - {DSIPORTA_LANE3X, (IEN | M0)}, /* DSIPORTA_LANE3X */ - {DSIPORTA_LANE3Y, (IEN | M0)}, /* DSIPORTA_LANE3Y */ - {DSIPORTA_LANE4X, (IEN | M0)}, /* DSIPORTA_LANE4X */ - {DSIPORTA_LANE4Y, (IEN | M0)}, /* DSIPORTA_LANE4Y */ - {TIMER9_PWM_EVT, (IEN | M0)}, /* TIMER9_PWM_EVT */ - {DSIPORTC_TE0, (IEN | M0)}, /* DSIPORTC_TE0 */ - {DSIPORTC_LANE0X, (IEN | M0)}, /* DSIPORTC_LANE0X */ - {DSIPORTC_LANE0Y, (IEN | M0)}, /* DSIPORTC_LANE0Y */ - {DSIPORTC_LANE1X, (IEN | M0)}, /* DSIPORTC_LANE1X */ - {DSIPORTC_LANE1Y, (IEN | M0)}, /* DSIPORTC_LANE1Y */ - {DSIPORTC_LANE2X, (IEN | M0)}, /* DSIPORTC_LANE2X */ - {DSIPORTC_LANE2Y, (IEN | M0)}, /* DSIPORTC_LANE2Y */ - {DSIPORTC_LANE3X, (IEN | M0)}, /* DSIPORTC_LANE3X */ - {DSIPORTC_LANE3Y, (IEN | M0)}, /* DSIPORTC_LANE3Y */ - {DSIPORTC_LANE4X, (IEN | M0)}, /* DSIPORTC_LANE4X */ - {DSIPORTC_LANE4Y, (IEN | M0)}, /* DSIPORTC_LANE4Y */ - {RFBI_HSYNC0, (M4)}, /* KBD_COL5 */ - {RFBI_TE_VSYNC0, (PTD | M6)}, /* GPIO6_161 */ - {RFBI_RE, (M4)}, /* KBD_COL4 */ - {RFBI_A0, (PTD | IEN | M6)}, /* GPIO6_165 */ - {RFBI_DATA8, (M4)}, /* KBD_COL3 */ - {RFBI_DATA9, (PTD | M6)}, /* GPIO6_175 */ - {RFBI_DATA10, (PTD | M6)}, /* GPIO6_176 */ - {RFBI_DATA11, (PTD | M6)}, /* GPIO6_177 */ - {RFBI_DATA12, (PTD | M6)}, /* GPIO6_178 */ - {RFBI_DATA13, (PTU | IEN | M6)}, /* GPIO6_179 */ - {RFBI_DATA14, (M4)}, /* KBD_COL7 */ - {RFBI_DATA15, (M4)}, /* KBD_COL6 */ - {GPIO6_182, (M6)}, /* GPIO6_182 */ - {GPIO6_183, (PTD | M6)}, /* GPIO6_183 */ - {GPIO6_184, (M4)}, /* KBD_COL2 */ - {GPIO6_185, (PTD | IEN | M6)}, /* GPIO6_185 */ - {GPIO6_186, (PTD | M6)}, /* GPIO6_186 */ - {GPIO6_187, (PTU | IEN | M4)}, /* KBD_ROW2 */ - {RFBI_DATA0, (PTD | M6)}, /* GPIO6_166 */ - {RFBI_DATA1, (PTD | M6)}, /* GPIO6_167 */ - {RFBI_DATA2, (PTD | M6)}, /* GPIO6_168 */ - {RFBI_DATA3, (PTD | IEN | M6)}, /* GPIO6_169 */ - {RFBI_DATA4, (IEN | M6)}, /* GPIO6_170 */ - {RFBI_DATA5, (IEN | M6)}, /* GPIO6_171 */ - {RFBI_DATA6, (PTD | M6)}, /* GPIO6_172 */ - {RFBI_DATA7, (PTD | M6)}, /* GPIO6_173 */ - {RFBI_CS0, (PTD | IEN | M6)}, /* GPIO6_163 */ - {RFBI_WE, (PTD | M6)}, /* GPIO6_162 */ - {MCSPI2_CS0, (M0)}, /* MCSPI2_CS0 */ - {MCSPI2_CLK, (IEN | M0)}, /* MCSPI2_CLK */ - {MCSPI2_SIMO, (IEN | M0)}, /* MCSPI2_SIMO*/ - {MCSPI2_SOMI, (PTU | IEN | M0)}, /* MCSPI2_SOMI*/ - {I2C4_SCL, (IEN | M0)}, /* I2C4_SCL */ - {I2C4_SDA, (IEN | M0)}, /* I2C4_SDA */ - {HDMI_CEC, (IEN | M0)}, /* HDMI_CEC */ - {HDMI_HPD, (PTD | IEN | M0)}, /* HDMI_HPD */ - {HDMI_DDC_SCL, (IEN | M0)}, /* HDMI_DDC_SCL */ - {HDMI_DDC_SDA, (IEN | M0)}, /* HDMI_DDC_SDA */ - {CSIPORTA_LANE0X, (IEN | M0)}, /* CSIPORTA_LANE0X */ - {CSIPORTA_LANE0Y, (IEN | M0)}, /* CSIPORTA_LANE0Y */ - {CSIPORTA_LANE1Y, (IEN | M0)}, /* CSIPORTA_LANE1Y */ - {CSIPORTA_LANE1X, (IEN | M0)}, /* CSIPORTA_LANE1X */ - {CSIPORTA_LANE2Y, (IEN | M0)}, /* CSIPORTA_LANE2Y */ - {CSIPORTA_LANE2X, (IEN | M0)}, /* CSIPORTA_LANE2X */ - {CSIPORTA_LANE3X, (IEN | M0)}, /* CSIPORTA_LANE3X */ - {CSIPORTA_LANE3Y, (IEN | M0)}, /* CSIPORTA_LANE3Y */ - {CSIPORTA_LANE4X, (IEN | M0)}, /* CSIPORTA_LANE4X */ - {CSIPORTA_LANE4Y, (IEN | M0)}, /* CSIPORTA_LANE4Y */ - {CSIPORTB_LANE0X, (IEN | M0)}, /* CSIPORTB_LANE0X */ - {CSIPORTB_LANE0Y, (IEN | M0)}, /* CSIPORTB_LANE0Y */ - {CSIPORTB_LANE1Y, (IEN | M0)}, /* CSIPORTB_LANE1Y */ - {CSIPORTB_LANE1X, (IEN | M0)}, /* CSIPORTB_LANE1X */ - {CSIPORTB_LANE2Y, (IEN | M0)}, /* CSIPORTB_LANE2Y */ - {CSIPORTB_LANE2X, (IEN | M0)}, /* CSIPORTB_LANE2X */ - {CSIPORTC_LANE0Y, (IEN | M0)}, /* CSIPORTC_LANE0Y */ - {CSIPORTC_LANE0X, (IEN | M0)}, /* CSIPORTC_LANE0X */ - {CSIPORTC_LANE1Y, (IEN | M0)}, /* CSIPORTC_LANE1Y */ - {CSIPORTC_LANE1X, (IEN | M0)}, /* CSIPORTC_LANE1X */ - {CAM_SHUTTER, (M0)}, /* CAM_SHUTTER */ - {CAM_STROBE, (M0)}, /* CAM_STROBE */ - {CAM_GLOBALRESET, (IEN | M0)}, /* CAM_GLOBALRESET */ - {TIMER11_PWM_EVT, (PTD | M6)}, /* GPIO8_227 */ - {TIMER5_PWM_EVT, (PTD | M6)}, /* GPIO8_228 */ - {TIMER6_PWM_EVT, (PTD | M6)}, /* GPIO8_229 */ - {TIMER8_PWM_EVT, (PTU | M6)}, /* GPIO8_230 */ - {I2C3_SCL, (IEN | M0)}, /* I2C3_SCL */ - {I2C3_SDA, (IEN | M0)}, /* I2C3_SDA */ - {GPIO8_233, (IEN | M2)}, /* TIMER8_PWM_EVT */ - {ABE_CLKS, (IEN | M0)}, /* ABE_CLKS */ - {ABEDMIC_DIN1, (IEN | M0)}, /* ABEDMIC_DIN1 */ - {ABEDMIC_DIN2, (IEN | M0)}, /* ABEDMIC_DIN2 */ - {ABEDMIC_DIN3, (IEN | M0)}, /* ABEDMIC_DIN3 */ - {ABEDMIC_CLK1, (M0)}, /* ABEDMIC_CLK1 */ - {ABEDMIC_CLK2, (IEN | M1)}, /* ABEMCBSP1_FSX */ - {ABEDMIC_CLK3, (M1)}, /* ABEMCBSP1_DX */ - {ABESLIMBUS1_CLOCK, (IEN | M1)}, /* ABEMCBSP1_CLKX */ - {ABESLIMBUS1_DATA, (IEN | M1)}, /* ABEMCBSP1_DR */ - {ABEMCBSP2_DR, (IEN | M0)}, /* ABEMCBSP2_DR */ - {ABEMCBSP2_DX, (M0)}, /* ABEMCBSP2_DX */ - {ABEMCBSP2_FSX, (IEN | M0)}, /* ABEMCBSP2_FSX */ - {ABEMCBSP2_CLKX, (IEN | M0)}, /* ABEMCBSP2_CLKX */ - {ABEMCPDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_UL_DATA */ - {ABEMCPDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_DL_DATA */ - {ABEMCPDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_FRAME */ - {ABEMCPDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_LB_CLK */ - {WLSDIO_CLK, (PTU | IEN | M0)}, /* WLSDIO_CLK */ - {WLSDIO_CMD, (PTU | IEN | M0)}, /* WLSDIO_CMD */ - {WLSDIO_DATA0, (PTU | IEN | M0)}, /* WLSDIO_DATA0*/ - {WLSDIO_DATA1, (PTU | IEN | M0)}, /* WLSDIO_DATA1*/ - {WLSDIO_DATA2, (PTU | IEN | M0)}, /* WLSDIO_DATA2*/ - {WLSDIO_DATA3, (PTU | IEN | M0)}, /* WLSDIO_DATA3*/ - {UART5_RX, (PTU | IEN | M0)}, /* UART5_RX */ - {UART5_TX, (M0)}, /* UART5_TX */ - {UART5_CTS, (PTU | IEN | M0)}, /* UART5_CTS */ - {UART5_RTS, (M0)}, /* UART5_RTS */ - {I2C2_SCL, (IEN | M0)}, /* I2C2_SCL */ - {I2C2_SDA, (IEN | M0)}, /* I2C2_SDA */ - {MCSPI1_CLK, (M6)}, /* GPIO5_140 */ - {MCSPI1_SOMI, (IEN | M6)}, /* GPIO5_141 */ - {MCSPI1_SIMO, (PTD | M6)}, /* GPIO5_142 */ - {MCSPI1_CS0, (PTD | M6)}, /* GPIO5_143 */ - {MCSPI1_CS1, (PTD | IEN | M6)}, /* GPIO5_144 */ - {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */ - {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */ - {PERSLIMBUS2_CLOCK, (PTD | M6)}, /* GPIO5_145 */ - {PERSLIMBUS2_DATA, (PTD | IEN | M6)}, /* GPIO5_146 */ - {UART6_TX, (PTU | IEN | M6)}, /* GPIO5_149 */ - {UART6_RX, (PTU | IEN | M6)}, /* GPIO5_150 */ - {UART6_CTS, (PTU | IEN | M6)}, /* GPIO5_151 */ - {UART6_RTS, (PTU | M0)}, /* UART6_RTS */ - {UART3_CTS_RCTX, (PTU | IEN | M6)}, /* GPIO5_153 */ - {UART3_RTS_IRSD, (PTU | IEN | M1)}, /* HDQ_SIO */ - {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */ - {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */ - -}; - -const struct pad_conf_entry wkup_padconf_array_non_essential[] = { - -/* - * This pad keeps C2C Module always enabled. - * Putting this in safe mode do not cause the issue. - * C2C driver could enable this mux setting if needed. - */ - {LLIA_WAKEREQIN, (M7)}, /* SAFE MODE */ - {LLIB_WAKEREQIN, (M7)}, /* SAFE MODE */ - {DRM_EMU0, (PTU | IEN | M0)}, /* DRM_EMU0 */ - {DRM_EMU1, (PTU | IEN | M0)}, /* DRM_EMU1 */ - {JTAG_NTRST, (IEN | M0)}, /* JTAG_NTRST */ - {JTAG_TCK, (IEN | M0)}, /* JTAG_TCK */ - {JTAG_RTCK, (M0)}, /* JTAG_RTCK */ - {JTAG_TMSC, (IEN | M0)}, /* JTAG_TMSC */ - {JTAG_TDI, (IEN | M0)}, /* JTAG_TDI */ - {JTAG_TDO, (M0)}, /* JTAG_TDO */ - {FREF_CLK_IOREQ, (IEN | M0)}, /* FREF_CLK_IOREQ */ - {FREF_CLK0_OUT, (M0)}, /* FREF_CLK0_OUT */ - {FREF_CLK1_OUT, (M0)}, /* FREF_CLK1_OUT */ - {FREF_CLK2_OUT, (M0)}, /* FREF_CLK2_OUT */ - {FREF_CLK2_REQ, (PTU | IEN | M6)}, /* GPIO1_WK9 */ - {FREF_CLK1_REQ, (PTD | IEN | M6)}, /* GPIO1_WK8 */ - {SYS_NRESPWRON, (IEN | M0)}, /* SYS_NRESPWRON */ - {SYS_NRESWARM, (PTU | IEN | M0)}, /* SYS_NRESWARM */ - {SYS_PWR_REQ, (M0)}, /* SYS_PWR_REQ */ - {SYS_NIRQ1, (PTU | IEN | M0)}, /* SYS_NIRQ1 */ - {SYS_NIRQ2, (PTU | IEN | M0)}, /* SYS_NIRQ2 */ - {SYS_BOOT0, (IEN | M0)}, /* SYS_BOOT0 */ - {SYS_BOOT1, (IEN | M0)}, /* SYS_BOOT1 */ - {SYS_BOOT2, (IEN | M0)}, /* SYS_BOOT2 */ - {SYS_BOOT3, (IEN | M0)}, /* SYS_BOOT3 */ - {SYS_BOOT4, (IEN | M0)}, /* SYS_BOOT4 */ - {SYS_BOOT5, (IEN | M0)}, /* SYS_BOOT5 */ - -}; - #endif /* _EVM4430_MUX_DATA_H */ diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index cda09a9..5ab6db9 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -284,36 +284,6 @@ void set_muxconf_regs_essential(void) sizeof(struct pad_conf_entry)); } -void set_muxconf_regs_non_essential(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_non_essential, - sizeof(core_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); - - if (omap_revision() < OMAP4460_ES1_0) - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_non_essential_4430, - sizeof(core_padconf_array_non_essential_4430) / - sizeof(struct pad_conf_entry)); - else - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_non_essential_4460, - sizeof(core_padconf_array_non_essential_4460) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_non_essential, - sizeof(wkup_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); - - if (omap_revision() < OMAP4460_ES1_0) - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_non_essential_4430, - sizeof(wkup_padconf_array_non_essential_4430) / - sizeof(struct pad_conf_entry)); -} - #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h index fb83eac..53c7080 100644 --- a/board/ti/panda/panda_mux_data.h +++ b/board/ti/panda/panda_mux_data.h @@ -84,190 +84,4 @@ const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { }; -const struct pad_conf_entry core_padconf_array_non_essential[] = { - {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */ - {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */ - {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */ - {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */ - {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */ - {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */ - {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */ - {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */ - {GPMC_A16, (M3)}, /* gpio_40 */ - {GPMC_A17, (PTD | M3)}, /* gpio_41 */ - {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */ - {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */ - {GPMC_A20, (IEN | M3)}, /* gpio_44 */ - {GPMC_A21, (M3)}, /* gpio_45 */ - {GPMC_A22, (M3)}, /* gpio_46 */ - {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */ - {GPMC_A24, (PTD | M3)}, /* gpio_48 */ - {GPMC_A25, (PTD | M3)}, /* gpio_49 */ - {GPMC_NCS0, (M3)}, /* gpio_50 */ - {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */ - {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */ - {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */ - {GPMC_NWP, (M3)}, /* gpio_54 */ - {GPMC_CLK, (PTD | M3)}, /* gpio_55 */ - {GPMC_NADV_ALE, (M3)}, /* gpio_56 */ - {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */ - {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */ - {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */ - {C2C_DATA11, (PTD | M3)}, /* gpio_100 */ - {C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101 */ - {C2C_DATA13, (PTD | M3)}, /* gpio_102 */ - {C2C_DATA14, (M1)}, /* dsi2_te0 */ - {C2C_DATA15, (PTD | M3)}, /* gpio_104 */ - {HDMI_HPD, (M0)}, /* hdmi_hpd */ - {HDMI_CEC, (M0)}, /* hdmi_cec */ - {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */ - {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */ - {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */ - {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */ - {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */ - {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */ - {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */ - {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */ - {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */ - {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */ - {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */ - {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */ - {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */ - {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */ - {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */ - {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */ - {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */ - {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */ - {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */ - {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ - {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ - {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */ - {ABE_MCBSP1_CLKX, (IEN | M0)}, /* abe_mcbsp1_clkx */ - {ABE_MCBSP1_DR, (IEN | M0)}, /* abe_mcbsp1_dr */ - {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */ - {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */ - {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */ - {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */ - {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */ - {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */ - {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */ - {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */ - {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */ - {ABE_DMIC_DIN2, (PTU | IEN | M3)}, /* gpio_121 */ - {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */ - {UART2_CTS, (PTU | IEN | M7)}, /* uart2_cts */ - {UART2_RTS, (M7)}, /* uart2_rts */ - {UART2_RX, (PTU | IEN | M7)}, /* uart2_rx */ - {UART2_TX, (M7)}, /* uart2_tx */ - {HDQ_SIO, (M3)}, /* gpio_127 */ - {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */ - {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */ - {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */ - {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */ - {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */ - {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */ - {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */ - {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */ - {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */ - {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */ - {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */ - {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */ - {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */ - {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */ - {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */ - {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */ - {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */ - {UART4_RX, (IEN | M0)}, /* uart4_rx */ - {UART4_TX, (M0)}, /* uart4_tx */ - {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */ - {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */ - {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */ - {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */ - {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */ - {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */ - {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */ - {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */ - {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */ - {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */ - {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */ - {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */ - {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */ - {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */ - {UNIPRO_TX0, (PTD | IEN | M3)}, /* gpio_171 */ - {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */ - {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */ - {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */ - {UNIPRO_TX2, (PTU | IEN | M3)}, /* gpio_0 */ - {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */ - {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */ - {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */ - {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */ - {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */ - {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */ - {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ - {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ - {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ - {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */ - {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ - {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */ - {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */ - {SYS_BOOT1, (M3)}, /* gpio_185 */ - {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */ - {SYS_BOOT3, (M3)}, /* gpio_187 */ - {SYS_BOOT4, (M3)}, /* gpio_188 */ - {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */ - {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */ - {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */ - {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */ - {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */ - {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */ - {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */ - {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */ - {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */ - {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */ - {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */ - {DPM_EMU10, (IEN | M5)}, /* dispc2_de */ - {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */ - {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */ - {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */ - {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */ - {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */ - {DPM_EMU16, (M3)}, /* gpio_27 */ - {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */ - {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */ - {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */ -}; - -const struct pad_conf_entry core_padconf_array_non_essential_4430[] = { - {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */ -}; - -const struct pad_conf_entry core_padconf_array_non_essential_4460[] = { - {ABE_MCBSP2_CLKX, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */ -}; - -const struct pad_conf_entry wkup_padconf_array_non_essential[] = { - {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */ - {PAD1_SIM_CLK, (M0)}, /* sim_clk */ - {PAD0_SIM_RESET, (M0)}, /* sim_reset */ - {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */ - {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */ - {PAD1_FREF_XTAL_IN, (M0)}, /* # */ - {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ - {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ - {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ - {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */ - {PAD0_FREF_CLK4_OUT, (PTU | M3)}, /* led status_2 */ - {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ - {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ - {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ - {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ - {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */ - {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */ -}; - -const struct pad_conf_entry wkup_padconf_array_non_essential_4430[] = { - {PAD1_FREF_CLK4_REQ, (PTU | M3)}, /* led status_1 */ -}; - #endif /* _PANDA_MUX_DATA_H_ */ diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 79270a9..1e9ef9e 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -73,26 +73,6 @@ void set_muxconf_regs_essential(void) sizeof(struct pad_conf_entry)); } -void set_muxconf_regs_non_essential(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_non_essential, - sizeof(core_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_non_essential, - sizeof(wkup_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); - - if (omap_revision() < OMAP4460_ES1_0) { - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_non_essential_4430, - sizeof(wkup_padconf_array_non_essential_4430) / - sizeof(struct pad_conf_entry)); - } -} - #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h index 4394dba..9a9efe7 100644 --- a/board/ti/sdp4430/sdp4430_mux_data.h +++ b/board/ti/sdp4430/sdp4430_mux_data.h @@ -65,201 +65,4 @@ const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { }; -const struct pad_conf_entry core_padconf_array_non_essential[] = { - {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */ - {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */ - {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */ - {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */ - {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */ - {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */ - {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */ - {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */ - {GPMC_A16, (M3)}, /* gpio_40 */ - {GPMC_A17, (PTD | M3)}, /* gpio_41 */ - {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */ - {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */ - {GPMC_A20, (IEN | M3)}, /* gpio_44 */ - {GPMC_A21, (M3)}, /* gpio_45 */ - {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */ - {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */ - {GPMC_A24, (PTD | M3)}, /* gpio_48 */ - {GPMC_A25, (PTD | M3)}, /* gpio_49 */ - {GPMC_NCS0, (M3)}, /* gpio_50 */ - {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */ - {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */ - {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */ - {GPMC_NWP, (M3)}, /* gpio_54 */ - {GPMC_CLK, (PTD | M3)}, /* gpio_55 */ - {GPMC_NADV_ALE, (M3)}, /* gpio_56 */ - {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */ - {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */ - {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */ - {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */ - {C2C_DATA11, (PTD | M3)}, /* gpio_100 */ - {C2C_DATA12, (M1)}, /* dsi1_te0 */ - {C2C_DATA13, (PTD | M3)}, /* gpio_102 */ - {C2C_DATA14, (M1)}, /* dsi2_te0 */ - {C2C_DATA15, (PTD | M3)}, /* gpio_104 */ - {HDMI_HPD, (M0)}, /* hdmi_hpd */ - {HDMI_CEC, (M0)}, /* hdmi_cec */ - {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */ - {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */ - {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */ - {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */ - {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */ - {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */ - {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */ - {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */ - {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */ - {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */ - {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */ - {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */ - {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */ - {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */ - {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */ - {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */ - {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */ - {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */ - {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */ - {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cawake */ - {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cadata */ - {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caflag */ - {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /* hsi1_acready */ - {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /* hsi1_acwake */ - {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */ - {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */ - {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */ - {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */ - {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ - {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ - {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */ - {ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_clkx */ - {ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dr */ - {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */ - {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */ - {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */ - {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */ - {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */ - {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */ - {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */ - {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */ - {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */ - {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */ - {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */ - {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */ - {UART2_RTS, (M0)}, /* uart2_rts */ - {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */ - {UART2_TX, (M0)}, /* uart2_tx */ - {HDQ_SIO, (M3)}, /* gpio_127 */ - {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */ - {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */ - {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */ - {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */ - {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */ - {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */ - {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */ - {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */ - {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */ - {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */ - {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */ - {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */ - {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */ - {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */ - {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */ - {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */ - {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */ - {UART4_RX, (IEN | M0)}, /* uart4_rx */ - {UART4_TX, (M0)}, /* uart4_tx */ - {USBB2_ULPITLL_CLK, (PTD | IEN | M3)}, /* gpio_157 */ - {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */ - {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */ - {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */ - {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */ - {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */ - {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */ - {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */ - {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */ - {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */ - {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */ - {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */ - {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */ - {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */ - {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */ - {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */ - {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */ - {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */ - {UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col4 */ - {UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col5 */ - {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */ - {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */ - {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */ - {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */ - {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */ - {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */ - {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */ - {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */ - {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ - {SYS_NIRQ2, (M7)}, /* sys_nirq2 */ - {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */ - {SYS_BOOT1, (M3)}, /* gpio_185 */ - {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */ - {SYS_BOOT3, (PTD | IEN | M3)}, /* gpio_187 */ - {SYS_BOOT4, (M3)}, /* gpio_188 */ - {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */ - {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */ - {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */ - {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */ - {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */ - {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */ - {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */ - {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */ - {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */ - {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */ - {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */ - {DPM_EMU10, (IEN | M5)}, /* dispc2_de */ - {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */ - {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */ - {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */ - {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */ - {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */ - {DPM_EMU16, (M3)}, /* gpio_27 */ - {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */ - {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */ - {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */ - {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ - {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ - {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ - {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ - {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ - {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ - {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ - {I2C4_SDA, (PTU | IEN | M0)} /* i2c4_sda */ - -}; - -const struct pad_conf_entry wkup_padconf_array_non_essential[] = { - {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */ - {PAD1_SIM_CLK, (M0)}, /* sim_clk */ - {PAD0_SIM_RESET, (M0)}, /* sim_reset */ - {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */ - {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */ - {PAD1_FREF_XTAL_IN, (M0)}, /* # */ - {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ - {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ - {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ - {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 - Debug led-1 */ - {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ - {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 - Debug led-3 */ - {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ - {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ - {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ - {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ - {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */ - {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */ -}; - -const struct pad_conf_entry wkup_padconf_array_non_essential_4430[] = { - {PAD1_FREF_CLK4_REQ, (M3)} /* gpio_wk7 - Debug led-2 */ -}; - #endif /* _SDP4430_MUX_DATA_H */ diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts deleted file mode 100644 index c0e54af..0000000 --- a/board/toradex/dts/tegra20-colibri_t20_iris.dts +++ /dev/null @@ -1,45 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "Toradex Colibri T20"; - compatible = "toradex,t20", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; - usb2 = "/usb@c5004000"; - sdhci0 = "/sdhci@c8000600"; - }; - - usb@c5000000 { - dr_mode = "otg"; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */ - nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */ - }; - - usb@c5008000 { - nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */ - }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */ - nvidia,width = <8>; - nvidia,timing = <15 100 25 80 25 10 15 10 100>; - - nand@0 { - reg = <0>; - compatible = "nand-flash"; - }; - }; - - sdhci@c8000600 { - status = "okay"; - cd-gpios = <&gpio 23 1>; /* gpio PC7 */ - bus-width = <4>; - }; -}; diff --git a/board/xilinx/dts/microblaze-generic.dts b/board/xilinx/dts/microblaze-generic.dts deleted file mode 100644 index 2033309..0000000 --- a/board/xilinx/dts/microblaze-generic.dts +++ /dev/null @@ -1,7 +0,0 @@ -/dts-v1/; -/ { - #address-cells = <1>; - #size-cells = <1>; - aliases { - } ; -} ; diff --git a/board/xilinx/dts/zynq-microzed.dts b/board/xilinx/dts/zynq-microzed.dts deleted file mode 100644 index 6da71c1..0000000 --- a/board/xilinx/dts/zynq-microzed.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx MicroZED board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq MicroZED Board"; - compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc702.dts b/board/xilinx/dts/zynq-zc702.dts deleted file mode 100644 index 667dc28..0000000 --- a/board/xilinx/dts/zynq-zc702.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC702 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC702 Board"; - compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc706.dts b/board/xilinx/dts/zynq-zc706.dts deleted file mode 100644 index 526fc88..0000000 --- a/board/xilinx/dts/zynq-zc706.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC706 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC706 Board"; - compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc770-xm010.dts b/board/xilinx/dts/zynq-zc770-xm010.dts deleted file mode 100644 index 8b542a1..0000000 --- a/board/xilinx/dts/zynq-zc770-xm010.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC770 XM010 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC770 XM010 Board"; - compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc770-xm012.dts b/board/xilinx/dts/zynq-zc770-xm012.dts deleted file mode 100644 index 0379a07..0000000 --- a/board/xilinx/dts/zynq-zc770-xm012.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC770 XM012 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC770 XM012 Board"; - compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc770-xm013.dts b/board/xilinx/dts/zynq-zc770-xm013.dts deleted file mode 100644 index a4f9e05..0000000 --- a/board/xilinx/dts/zynq-zc770-xm013.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC770 XM013 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC770 XM013 Board"; - compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zed.dts b/board/xilinx/dts/zynq-zed.dts deleted file mode 100644 index 91a5deb..0000000 --- a/board/xilinx/dts/zynq-zed.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZED board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZED Board"; - compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/zynq/Makefile b/board/xilinx/zynq/Makefile index 6301a8c..3f19a1c 100644 --- a/board/xilinx/zynq/Makefile +++ b/board/xilinx/zynq/Makefile @@ -6,3 +6,4 @@ # obj-y := board.o +obj-$(CONFIG_SPL_BUILD) += ps7_init.o diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 5a47149..82f2345 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -12,12 +12,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Bootmode setting values */ -#define ZYNQ_BM_MASK 0x0F -#define ZYNQ_BM_NOR 0x02 -#define ZYNQ_BM_SD 0x05 -#define ZYNQ_BM_JTAG 0x0 - #ifdef CONFIG_FPGA Xilinx_desc fpga; @@ -59,8 +53,6 @@ int board_init(void) } #endif - icache_enable(); - #ifdef CONFIG_FPGA fpga_init(); fpga_add(fpga_xilinx, &fpga); @@ -89,7 +81,6 @@ int board_late_init(void) return 0; } -#ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bis) { u32 ret = 0; @@ -123,7 +114,6 @@ int board_eth_init(bd_t *bis) #endif return ret; } -#endif #ifdef CONFIG_CMD_MMC int board_mmc_init(bd_t *bd) diff --git a/board/xilinx/zynq/ps7_init.c b/board/xilinx/zynq/ps7_init.c new file mode 100644 index 0000000..c47da09 --- /dev/null +++ b/board/xilinx/zynq/ps7_init.c @@ -0,0 +1,12 @@ +/* + * (C) Copyright 2014 Xilinx, Inc. Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/arch/spl.h> + +__weak void ps7_init(void) +{ + puts("Please copy ps7_init.c/h from hw project\n"); +} |