diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/tqc/tqm8xx/tqm8xx.c | 70 |
1 files changed, 35 insertions, 35 deletions
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c index 59bbdbc..5537d04 100644 --- a/board/tqc/tqm8xx/tqm8xx.c +++ b/board/tqc/tqm8xx/tqm8xx.c @@ -400,8 +400,6 @@ phys_size_t initdram (int board_type) memctl->memc_or5 = CFG_OR5_ISP1362; memctl->memc_br5 = CFG_BR5_ISP1362; #endif /* CONFIG_ISP1362_USB */ - - return (size_b0 + size_b1); } @@ -453,7 +451,7 @@ int board_early_init_r (void) #ifdef CONFIG_MISC_INIT_R int misc_init_r (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; #ifdef CFG_OR_TIMING_FLASH_AT_50MHZ @@ -463,28 +461,29 @@ int misc_init_r (void) if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) { trlx = OR_TRLX; scy *= 2; - } else + } else { trlx = 0; + } - /* - * We assume that each 10MHz of bus clock require 1-clk SCY - * adjustment. - */ + /* + * We assume that each 10MHz of bus clock require 1-clk SCY + * adjustment. + */ clk_diff = (gd->bus_clk / 1000000) - 50; - /* - * We need proper rounding here. This is what the "+5" and "-5" - * are here for. - */ + /* + * We need proper rounding here. This is what the "+5" and "-5" + * are here for. + */ if (clk_diff >= 0) scy += (clk_diff + 5) / 10; else scy += (clk_diff - 5) / 10; - /* - * For bus frequencies above 50MHz, we want to use relaxed timing - * (OR_TRLX). - */ + /* + * For bus frequencies above 50MHz, we want to use relaxed timing + * (OR_TRLX). + */ if (gd->bus_clk >= 50000000) trlx = OR_TRLX; else @@ -499,35 +498,39 @@ int misc_init_r (void) scy = 1; flash_or_timing = (scy << 4) | trlx | - (CFG_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK)); + (CFG_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK)); - memctl->memc_or0 = flash_or_timing | (-flash_info[0].size & OR_AM_MSK); + memctl->memc_or0 = + flash_or_timing | (-flash_info[0].size & OR_AM_MSK); #else - memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-flash_info[0].size & OR_AM_MSK); + memctl->memc_or0 = + CFG_OR_TIMING_FLASH | (-flash_info[0].size & OR_AM_MSK); #endif memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; debug ("## BR0: 0x%08x OR0: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0); + memctl->memc_br0, memctl->memc_or0); if (flash_info[1].size) { #ifdef CFG_OR_TIMING_FLASH_AT_50MHZ memctl->memc_or1 = flash_or_timing | - (-flash_info[1].size & 0xFFFF8000); + (-flash_info[1].size & 0xFFFF8000); #else memctl->memc_or1 = CFG_OR_TIMING_FLASH | - (-flash_info[1].size & 0xFFFF8000); + (-flash_info[1].size & 0xFFFF8000); #endif - memctl->memc_br1 = ((CFG_FLASH_BASE + flash_info[0].size) & BR_BA_MSK) | - BR_MS_GPCM | BR_V; + memctl->memc_br1 = + ((CFG_FLASH_BASE + + flash_info[0]. + size) & BR_BA_MSK) | BR_MS_GPCM | BR_V; debug ("## BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br1, memctl->memc_or1); + memctl->memc_br1, memctl->memc_or1); } else { - memctl->memc_br1 = 0; /* invalidate bank */ + memctl->memc_br1 = 0; /* invalidate bank */ debug ("## DISABLE BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br1, memctl->memc_or1); + memctl->memc_br1, memctl->memc_or1); } # ifdef CONFIG_IDE_LED @@ -540,11 +543,11 @@ int misc_init_r (void) #ifdef CONFIG_NSCU /* wake up ethernet module */ - immap->im_ioport.iop_pcpar &= ~0x0004; /* GPIO pin */ - immap->im_ioport.iop_pcdir |= 0x0004; /* output */ - immap->im_ioport.iop_pcso &= ~0x0004; /* for clarity */ - immap->im_ioport.iop_pcdat |= 0x0004; /* enable */ -#endif /* CONFIG_NSCU */ + immap->im_ioport.iop_pcpar &= ~0x0004; /* GPIO pin */ + immap->im_ioport.iop_pcdir |= 0x0004; /* output */ + immap->im_ioport.iop_pcso &= ~0x0004; /* for clarity */ + immap->im_ioport.iop_pcdat |= 0x0004; /* enable */ +#endif /* CONFIG_NSCU */ return (0); } @@ -609,7 +612,4 @@ int last_stage_init(void) return 0; } - #endif - -/* ------------------------------------------------------------------------- */ |