summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/cogent/lcd.c2
-rw-r--r--board/compulab/cm_t35/cm_t35.c157
-rw-r--r--board/compulab/cm_t3517/Kconfig12
-rw-r--r--board/compulab/cm_t3517/MAINTAINERS6
-rw-r--r--board/compulab/cm_t3517/Makefile9
-rw-r--r--board/compulab/cm_t3517/cm_t3517.c231
-rw-r--r--board/compulab/cm_t3517/mux.c236
-rw-r--r--board/compulab/cm_t54/cm_t54.c7
-rw-r--r--board/compulab/common/Makefile7
-rw-r--r--board/compulab/common/common.c59
-rw-r--r--board/compulab/common/common.h47
-rw-r--r--board/compulab/common/eeprom.c14
-rw-r--r--board/compulab/common/omap3_smc911x.c93
-rw-r--r--board/compulab/common/splash.c72
-rw-r--r--board/esd/common/auto_update.c3
-rw-r--r--board/esd/pci405/cmd_pci405.c4
-rw-r--r--board/keymile/common/common.c1
-rw-r--r--board/matrix_vision/mvblx/sys_eeprom.c2
-rw-r--r--board/scb9328/flash.c2
-rw-r--r--board/siemens/pxm2/board.c2
-rw-r--r--board/ti/am335x/Kconfig15
-rw-r--r--board/ti/ks2_evm/README20
-rw-r--r--board/ti/ks2_evm/board.c7
-rw-r--r--board/ti/ks2_evm/board_k2l.c40
24 files changed, 877 insertions, 171 deletions
diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c
index 8e90f98..05ffc4d 100644
--- a/board/cogent/lcd.c
+++ b/board/cogent/lcd.c
@@ -234,7 +234,7 @@ lcd_heartbeat(void)
void board_show_activity (ulong timestamp)
{
#ifdef CONFIG_STATUS_LED
- if ((timestamp % (CONFIG_SYS_HZ / 2) == 0)
+ if ((timestamp % (CONFIG_SYS_HZ / 2)) == 0)
lcd_heartbeat ();
#endif
}
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index d0b0930..886c723 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -19,12 +19,11 @@
#include <i2c.h>
#include <usb.h>
#include <mmc.h>
-#include <nand.h>
#include <twl4030.h>
-#include <bmp_layout.h>
#include <linux/compiler.h>
#include <asm/io.h>
+#include <asm/errno.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/mmc_host_def.h>
@@ -33,6 +32,7 @@
#include <asm/ehci-omap.h>
#include <asm/gpio.h>
+#include "../common/common.h"
#include "../common/eeprom.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -43,58 +43,6 @@ const omap3_sysinfo sysinfo = {
"NAND",
};
-static u32 gpmc_net_config[GPMC_MAX_REG] = {
- NET_GPMC_CONFIG1,
- NET_GPMC_CONFIG2,
- NET_GPMC_CONFIG3,
- NET_GPMC_CONFIG4,
- NET_GPMC_CONFIG5,
- NET_GPMC_CONFIG6,
- 0
-};
-
-#ifdef CONFIG_LCD
-#ifdef CONFIG_CMD_NAND
-static int splash_load_from_nand(u32 bmp_load_addr)
-{
- struct bmp_header *bmp_hdr;
- int res, splash_screen_nand_offset = 0x100000;
- size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
-
- if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
- goto splash_address_too_high;
-
- res = nand_read_skip_bad(&nand_info[nand_curr_device],
- splash_screen_nand_offset, &bmp_header_size,
- NULL, nand_info[nand_curr_device].size,
- (u_char *)bmp_load_addr);
- if (res < 0)
- return res;
-
- bmp_hdr = (struct bmp_header *)bmp_load_addr;
- bmp_size = le32_to_cpu(bmp_hdr->file_size);
-
- if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
- goto splash_address_too_high;
-
- return nand_read_skip_bad(&nand_info[nand_curr_device],
- splash_screen_nand_offset, &bmp_size,
- NULL, nand_info[nand_curr_device].size,
- (u_char *)bmp_load_addr);
-
-splash_address_too_high:
- printf("Error: splashimage address too high. Data overwrites U-Boot "
- "and/or placed beyond DRAM boundaries.\n");
-
- return -1;
-}
-#else
-static inline int splash_load_from_nand(void)
-{
- return -1;
-}
-#endif /* CONFIG_CMD_NAND */
-
#ifdef CONFIG_SPL_BUILD
/*
* Routine: get_board_mem_timings
@@ -111,24 +59,12 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
}
#endif
+#define CM_T35_SPLASH_NAND_OFFSET 0x100000
+
int splash_screen_prepare(void)
{
- char *env_splashimage_value;
- u32 bmp_load_addr;
-
- env_splashimage_value = getenv("splashimage");
- if (env_splashimage_value == NULL)
- return -1;
-
- bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
- if (bmp_load_addr == 0) {
- printf("Error: bad splashimage address specified\n");
- return -1;
- }
-
- return splash_load_from_nand(bmp_load_addr);
+ return cl_splash_screen_prepare(CM_T35_SPLASH_NAND_OFFSET);
}
-#endif /* CONFIG_LCD */
/*
* Routine: board_init
@@ -154,34 +90,18 @@ int board_init(void)
return 0;
}
-static u32 cm_t3x_rev;
-
/*
* Routine: get_board_rev
* Description: read system revision
*/
u32 get_board_rev(void)
{
- if (!cm_t3x_rev)
- cm_t3x_rev = cl_eeprom_get_board_rev();
-
- return cm_t3x_rev;
+ return cl_eeprom_get_board_rev();
};
-/*
- * Routine: misc_init_r
- * Description: display die ID
- */
int misc_init_r(void)
{
- u32 board_rev = get_board_rev();
- u32 rev_major = board_rev / 100;
- u32 rev_minor = board_rev - (rev_major * 100);
-
- if ((rev_minor / 10) * 10 == rev_minor)
- rev_minor = rev_minor / 10;
-
- printf("PCB: %u.%u\n", rev_major, rev_minor);
+ cl_print_pcb_info();
dieid_num_r();
return 0;
@@ -462,37 +382,12 @@ int board_mmc_init(bd_t *bis)
}
#endif
-/*
- * Routine: setup_net_chip_gmpc
- * Description: Setting up the configuration GPMC registers specific to the
- * Ethernet hardware.
- */
-static void setup_net_chip_gmpc(void)
-{
- struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
- enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
- CM_T3X_SMC911X_BASE, GPMC_SIZE_16M);
- enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
- SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
-
- /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
- writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-
- /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-
- /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
- &ctrl_base->gpmc_nadv_ale);
-}
-
#ifdef CONFIG_SYS_I2C_OMAP34XX
/*
* Routine: reset_net_chip
* Description: reset the Ethernet controller via TPS65930 GPIO
*/
-static void reset_net_chip(void)
+static int cm_t3x_reset_net_chip(int gpio)
{
/* Set GPIO1 of TPS65930 as output */
twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03,
@@ -507,9 +402,10 @@ static void reset_net_chip(void)
twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
0x02);
mdelay(1);
+ return 0;
}
#else
-static inline void reset_net_chip(void) {}
+static inline int cm_t3x_reset_net_chip(int gpio) { return 0; }
#endif
#ifdef CONFIG_SMC911X
@@ -536,7 +432,6 @@ static int handle_mac_address(void)
return eth_setenv_enetaddr("ethaddr", enetaddr);
}
-
/*
* Routine: board_eth_init
* Description: initialize module and base-board Ethernet chips
@@ -545,18 +440,16 @@ int board_eth_init(bd_t *bis)
{
int rc = 0, rc1 = 0;
- setup_net_chip_gmpc();
- reset_net_chip();
-
rc1 = handle_mac_address();
if (rc1)
printf("No MAC address found! ");
- rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE);
+ rc1 = cl_omap3_smc911x_init(0, 5, CM_T3X_SMC911X_BASE,
+ cm_t3x_reset_net_chip, -EINVAL);
if (rc1 > 0)
rc++;
- rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
+ rc1 = cl_omap3_smc911x_init(1, 4, SB_T35_SMC911X_BASE, NULL, -EINVAL);
if (rc1 > 0)
rc++;
@@ -564,16 +457,6 @@ int board_eth_init(bd_t *bis)
}
#endif
-void __weak get_board_serial(struct tag_serialnr *serialnr)
-{
- /*
- * This corresponds to what happens when we can communicate with the
- * eeprom but don't get a valid board serial value.
- */
- serialnr->low = 0;
- serialnr->high = 0;
-};
-
#ifdef CONFIG_USB_EHCI_OMAP
struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
@@ -583,21 +466,12 @@ struct omap_usbhs_board_data usbhs_bdata = {
#define SB_T35_USB_HUB_RESET_GPIO 167
int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
u8 val;
int offset;
- if (gpio_request(SB_T35_USB_HUB_RESET_GPIO, "SB-T35 usb hub reset")) {
- printf("Error: can't obtain GPIO %d for SB-T35 usb hub reset",
- SB_T35_USB_HUB_RESET_GPIO);
- return -1;
- }
-
- gpio_direction_output(SB_T35_USB_HUB_RESET_GPIO, 0);
- udelay(10);
- gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
- udelay(1000);
+ cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst");
offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1;
twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val);
@@ -614,6 +488,7 @@ int ehci_hcd_init(int index, enum usb_init_type init,
int ehci_hcd_stop(void)
{
+ cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO);
return omap_ehci_hcd_stop();
}
#endif /* CONFIG_USB_EHCI_OMAP */
diff --git a/board/compulab/cm_t3517/Kconfig b/board/compulab/cm_t3517/Kconfig
new file mode 100644
index 0000000..2f5473d
--- /dev/null
+++ b/board/compulab/cm_t3517/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_CM_T3517
+
+config SYS_BOARD
+ default "cm_t3517"
+
+config SYS_VENDOR
+ default "compulab"
+
+config SYS_CONFIG_NAME
+ default "cm_t3517"
+
+endif
diff --git a/board/compulab/cm_t3517/MAINTAINERS b/board/compulab/cm_t3517/MAINTAINERS
new file mode 100644
index 0000000..fbb6882
--- /dev/null
+++ b/board/compulab/cm_t3517/MAINTAINERS
@@ -0,0 +1,6 @@
+CM_T3517 BOARD
+M: Igor Grinberg <grinberg@compulab.co.il>
+S: Maintained
+F: board/compulab/cm_t3517/
+F: include/configs/cm_t3517.h
+F: configs/cm_t3517_defconfig
diff --git a/board/compulab/cm_t3517/Makefile b/board/compulab/cm_t3517/Makefile
new file mode 100644
index 0000000..4f0db01
--- /dev/null
+++ b/board/compulab/cm_t3517/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+#
+# Authors: Igor Grinberg <grinberg@compulab.co.il>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cm_t3517.o mux.o
diff --git a/board/compulab/cm_t3517/cm_t3517.c b/board/compulab/cm_t3517/cm_t3517.c
new file mode 100644
index 0000000..cac1ad9
--- /dev/null
+++ b/board/compulab/cm_t3517/cm_t3517.c
@@ -0,0 +1,231 @@
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <status_led.h>
+#include <net.h>
+#include <netdev.h>
+#include <usb.h>
+#include <mmc.h>
+#include <linux/compiler.h>
+#include <linux/usb/musb.h>
+
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/am35x_def.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/musb.h>
+#include <asm/omap_musb.h>
+#include <asm/ehci-omap.h>
+
+#include "../common/common.h"
+#include "../common/eeprom.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "CM-T3517 board",
+ "NAND 128/512M",
+};
+
+#ifdef CONFIG_USB_MUSB_AM35X
+static struct musb_hdrc_config cm_t3517_musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 16,
+ .ram_bits = 12,
+};
+
+static struct omap_musb_board_data cm_t3517_musb_board_data = {
+ .set_phy_power = am35x_musb_phy_power,
+ .clear_irq = am35x_musb_clear_irq,
+ .reset = am35x_musb_reset,
+};
+
+static struct musb_hdrc_platform_data cm_t3517_musb_pdata = {
+#if defined(CONFIG_MUSB_HOST)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_MUSB_GADGET)
+ .mode = MUSB_PERIPHERAL,
+#else
+#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#endif
+ .config = &cm_t3517_musb_config,
+ .power = 250,
+ .platform_ops = &am35x_ops,
+ .board_data = &cm_t3517_musb_board_data,
+};
+
+static void cm_t3517_musb_init(void)
+{
+ /*
+ * Set up USB clock/mode in the DEVCONF2 register.
+ * USB2.0 PHY reference clock is 13 MHz
+ */
+ clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+ CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE,
+ CONF2_REFFREQ_13MHZ | CONF2_SESENDEN |
+ CONF2_VBDTCTEN | CONF2_DATPOL);
+
+ if (musb_register(&cm_t3517_musb_pdata, &cm_t3517_musb_board_data,
+ (void *)AM35XX_IPSS_USBOTGSS_BASE))
+ printf("Failed initializing AM35x MUSB!\n");
+}
+#else
+static inline void am3517_evm_musb_init(void) {}
+#endif
+
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
+
+ cm_t3517_musb_init();
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ cl_print_pcb_info();
+ dieid_num_r();
+
+ return 0;
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#define SB_T35_CD_GPIO 144
+#define SB_T35_WP_GPIO 59
+
+int board_mmc_init(bd_t *bis)
+{
+ return omap_mmc_init(0, 0, 0, SB_T35_CD_GPIO, SB_T35_WP_GPIO);
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+#define CONTROL_EFUSE_EMAC_LSB 0x48002380
+#define CONTROL_EFUSE_EMAC_MSB 0x48002384
+
+static int am3517_get_efuse_enetaddr(u8 *enetaddr)
+{
+ u32 lsb = __raw_readl(CONTROL_EFUSE_EMAC_LSB);
+ u32 msb = __raw_readl(CONTROL_EFUSE_EMAC_MSB);
+
+ enetaddr[0] = (u8)((msb >> 16) & 0xff);
+ enetaddr[1] = (u8)((msb >> 8) & 0xff);
+ enetaddr[2] = (u8)(msb & 0xff);
+ enetaddr[3] = (u8)((lsb >> 16) & 0xff);
+ enetaddr[4] = (u8)((lsb >> 8) & 0xff);
+ enetaddr[5] = (u8)(lsb & 0xff);
+
+ return is_valid_ether_addr(enetaddr);
+}
+
+static inline int cm_t3517_init_emac(bd_t *bis)
+{
+ int ret = cpu_eth_init(bis);
+
+ if (ret > 0)
+ return ret;
+
+ printf("Failed initializing EMAC! ");
+ return 0;
+}
+#else /* !CONFIG_DRIVER_TI_EMAC */
+static inline int am3517_get_efuse_enetaddr(u8 *enetaddr) { return 1; }
+static inline int cm_t3517_init_emac(bd_t *bis) { return 0; }
+#endif /* CONFIG_DRIVER_TI_EMAC */
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int cm_t3517_handle_mac_address(void)
+{
+ unsigned char enetaddr[6];
+ int ret;
+
+ ret = eth_getenv_enetaddr("ethaddr", enetaddr);
+ if (ret)
+ return 0;
+
+ ret = cl_eeprom_read_mac_addr(enetaddr);
+ if (ret) {
+ ret = am3517_get_efuse_enetaddr(enetaddr);
+ if (ret)
+ return ret;
+ }
+
+ if (!is_valid_ether_addr(enetaddr))
+ return -1;
+
+ return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+#define SB_T35_ETH_RST_GPIO 164
+
+/*
+ * Routine: board_eth_init
+ * Description: initialize module and base-board Ethernet chips
+ */
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0, rc1 = 0;
+
+ rc1 = cm_t3517_handle_mac_address();
+ if (rc1)
+ printf("No MAC address found! ");
+
+ rc1 = cm_t3517_init_emac(bis);
+ if (rc1 > 0)
+ rc++;
+
+ rc1 = cl_omap3_smc911x_init(0, 4, CONFIG_SMC911X_BASE,
+ NULL, SB_T35_ETH_RST_GPIO);
+ if (rc1 > 0)
+ rc++;
+
+ return rc;
+}
+
+#ifdef CONFIG_USB_EHCI_OMAP
+static struct omap_usbhs_board_data cm_t3517_usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+};
+
+#define CM_T3517_USB_HUB_RESET_GPIO 152
+#define SB_T35_USB_HUB_RESET_GPIO 98
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ cl_usb_hub_init(CM_T3517_USB_HUB_RESET_GPIO, "cm-t3517 hub rst");
+ cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst");
+
+ return omap_ehci_hcd_init(index, &cm_t3517_usbhs_bdata, hccr, hcor);
+}
+
+int ehci_hcd_stop(void)
+{
+ cl_usb_hub_deinit(CM_T3517_USB_HUB_RESET_GPIO);
+ cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO);
+
+ return omap_ehci_hcd_stop();
+}
+#endif /* CONFIG_USB_EHCI_OMAP */
diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c
new file mode 100644
index 0000000..88ce2cc
--- /dev/null
+++ b/board/compulab/cm_t3517/mux.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+
+void set_muxconf_regs(void)
+{
+ /* SDRC */
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7));
+
+ /* GPMC */
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));
+
+ /* SB-T35 Ethernet */
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0));
+ /* DVI enable */
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPIO_54*/
+ /* DataImage backlight */
+ MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/
+
+ /* SB-T35 SD/MMC WP GPIO59 */
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)); /*GPIO_59*/
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));
+ /* SB-T35 Audio Enable GPIO61 */
+ MUX_VAL(CP(GPMC_NBE1), (IDIS | PTU | EN | M4)); /*GPIO_61*/
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0));
+ /* SB-T35 Ethernet IRQ GPIO65 */
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)); /*GPIO_65*/
+
+ /* UART3 Console */
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0));
+ /* RTC V3020 nCS GPIO163 */
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | EN | M4)); /*GPIO_163*/
+ /* SB-T35 Ethernet nRESET GPIO164 */
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)); /*GPIO_164*/
+
+ /* SB-T35 SD/MMC CD GPIO144 */
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)); /*GPIO_144*/
+ /* WIFI nRESET GPIO145 */
+ MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)); /*GPIO_145*/
+ /* USB1 PHY Reset GPIO 146 */
+ MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)); /*GPIO_146*/
+ /* USB2 PHY Reset GPIO 147 */
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/
+
+ /* MMC1 */
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));
+
+ /* DSS */
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0));
+
+ /* I2C */
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));
+
+ /* SB-T35 USB HUB Reset GPIO98 */
+ MUX_VAL(CP(CCDC_WEN), (IDIS | PTU | EN | M4)); /*GPIO_98*/
+ /* CM-T3517 USB HUB Reset GPIO152 */
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/
+
+ /* RMII */
+ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(RMII_MDIO_CLK), (M0));
+ MUX_VAL(CP(RMII_RXD0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_RXD1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_RXER), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_TXD0), (IDIS | M0));
+ MUX_VAL(CP(RMII_TXD1), (IDIS | M0));
+ MUX_VAL(CP(RMII_TXEN), (IDIS | M0));
+ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTU | DIS | M0));
+
+ /* Green LED GPIO186 */
+ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*GPIO_186*/
+
+ /* SPI */
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/
+ MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/
+ /* LCD reset GPIO157 */
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/
+
+ /* RTC V3020 CS Enable GPIO160 */
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | EN | M4)); /*GPIO_160*/
+ /* SB-T35 LVDS Transmitter SHDN GPIO162 */
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | DIS | M4)); /*GPIO_162*/
+
+ /* USB0 - mUSB */
+ MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0));
+ /* USB1 EHCI */
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/
+ /* USB2 EHCI */
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT0*/
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT1*/
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)); /*HSUSB2_DT2*/
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)); /*HSUSB2_DT3*/
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)); /*HSUSB2_DT4*/
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)); /*HSUSB2_DT5*/
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)); /*HSUSB2_DT6*/
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)); /*HSUSB2_DT7*/
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DIR*/
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_NXT*/
+ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/
+ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/
+
+ /* SYS_BOOT */
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTU | DIS | M4)); /*GPIO_2*/
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTU | DIS | M4)); /*GPIO_3*/
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTU | DIS | M4)); /*GPIO_4*/
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTU | DIS | M4)); /*GPIO_5*/
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTU | DIS | M4)); /*GPIO_6*/
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTU | DIS | M4)); /*GPIO_7*/
+}
diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c
index 944b723..b1a067d 100644
--- a/board/compulab/cm_t54/cm_t54.c
+++ b/board/compulab/cm_t54/cm_t54.c
@@ -100,16 +100,11 @@ uint mmc_get_env_part(struct mmc *mmc)
#define SB_T54_CD_GPIO 228
#define SB_T54_WP_GPIO 229
-int board_mmc_getcd(struct mmc *mmc)
-{
- return !gpio_get_value(SB_T54_CD_GPIO);
-}
-
int board_mmc_init(bd_t *bis)
{
int ret0, ret1;
- ret0 = omap_mmc_init(0, 0, 0, -1, SB_T54_WP_GPIO);
+ ret0 = omap_mmc_init(0, 0, 0, SB_T54_CD_GPIO, SB_T54_WP_GPIO);
if (ret0)
printf("cm_t54: failed to initialize mmc0\n");
diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile
index 4044ac9..dbf0009 100644
--- a/board/compulab/common/Makefile
+++ b/board/compulab/common/Makefile
@@ -6,5 +6,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_SYS_I2C) += eeprom.o
-obj-$(CONFIG_LCD) += omap3_display.o
+obj-y += common.o
+obj-$(CONFIG_SYS_I2C) += eeprom.o
+obj-$(CONFIG_LCD) += omap3_display.o
+obj-$(CONFIG_SPLASH_SCREEN) += splash.o
+obj-$(CONFIG_SMC911X) += omap3_smc911x.o
diff --git a/board/compulab/common/common.c b/board/compulab/common/common.c
new file mode 100644
index 0000000..b25d9a2
--- /dev/null
+++ b/board/compulab/common/common.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/bootm.h>
+#include <asm/gpio.h>
+
+#include "common.h"
+#include "eeprom.h"
+
+void cl_print_pcb_info(void)
+{
+ u32 board_rev = get_board_rev();
+ u32 rev_major = board_rev / 100;
+ u32 rev_minor = board_rev - (rev_major * 100);
+
+ if ((rev_minor / 10) * 10 == rev_minor)
+ rev_minor = rev_minor / 10;
+
+ printf("PCB: %u.%u\n", rev_major, rev_minor);
+}
+
+#ifdef CONFIG_SERIAL_TAG
+void __weak get_board_serial(struct tag_serialnr *serialnr)
+{
+ /*
+ * This corresponds to what happens when we can communicate with the
+ * eeprom but don't get a valid board serial value.
+ */
+ serialnr->low = 0;
+ serialnr->high = 0;
+};
+#endif
+
+#ifdef CONFIG_CMD_USB
+int cl_usb_hub_init(int gpio, const char *label)
+{
+ if (gpio_request(gpio, label)) {
+ printf("Error: can't obtain GPIO%d for %s", gpio, label);
+ return -1;
+ }
+
+ gpio_direction_output(gpio, 0);
+ udelay(10);
+ gpio_set_value(gpio, 1);
+ udelay(1000);
+ return 0;
+}
+
+void cl_usb_hub_deinit(int gpio)
+{
+ gpio_free(gpio);
+}
+#endif
diff --git a/board/compulab/common/common.h b/board/compulab/common/common.h
new file mode 100644
index 0000000..68ffb11
--- /dev/null
+++ b/board/compulab/common/common.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CL_COMMON_
+#define _CL_COMMON_
+
+#include <asm/errno.h>
+
+void cl_print_pcb_info(void);
+
+#ifdef CONFIG_CMD_USB
+int cl_usb_hub_init(int gpio, const char *label);
+void cl_usb_hub_deinit(int gpio);
+#else /* !CONFIG_CMD_USB */
+static inline int cl_usb_hub_init(int gpio, const char *label)
+{
+ return -ENOSYS;
+}
+static inline void cl_usb_hub_deinit(int gpio) {}
+#endif /* CONFIG_CMD_USB */
+
+#ifdef CONFIG_SPLASH_SCREEN
+int cl_splash_screen_prepare(int nand_offset);
+#else /* !CONFIG_SPLASH_SCREEN */
+static inline int cl_splash_screen_prepare(int nand_offset)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_SPLASH_SCREEN */
+
+#ifdef CONFIG_SMC911X
+int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio);
+#else /* !CONFIG_SMC911X */
+static inline int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_SMC911X */
+
+#endif /* _CL_COMMON_ */
diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c
index 2df3ada..a45e7be 100644
--- a/board/compulab/common/eeprom.c
+++ b/board/compulab/common/eeprom.c
@@ -109,23 +109,27 @@ int cl_eeprom_read_mac_addr(uchar *buf)
return cl_eeprom_read(offset, buf, 6);
}
+static u32 board_rev;
+
/*
* Routine: cl_eeprom_get_board_rev
* Description: read system revision from eeprom
*/
u32 cl_eeprom_get_board_rev(void)
{
- u32 rev = 0;
char str[5]; /* Legacy representation can contain at most 4 digits */
uint offset = BOARD_REV_OFFSET_LEGACY;
+ if (board_rev)
+ return board_rev;
+
if (cl_eeprom_setup_layout())
return 0;
if (cl_eeprom_layout != LAYOUT_LEGACY)
offset = BOARD_REV_OFFSET;
- if (cl_eeprom_read(offset, (uchar *)&rev, BOARD_REV_SIZE))
+ if (cl_eeprom_read(offset, (uchar *)&board_rev, BOARD_REV_SIZE))
return 0;
/*
@@ -133,9 +137,9 @@ u32 cl_eeprom_get_board_rev(void)
* representation. i.e. for rev 1.00: 0x100 --> 0x64
*/
if (cl_eeprom_layout == LAYOUT_LEGACY) {
- sprintf(str, "%x", rev);
- rev = simple_strtoul(str, NULL, 10);
+ sprintf(str, "%x", board_rev);
+ board_rev = simple_strtoul(str, NULL, 10);
}
- return rev;
+ return board_rev;
};
diff --git a/board/compulab/common/omap3_smc911x.c b/board/compulab/common/omap3_smc911x.c
new file mode 100644
index 0000000..4561661
--- /dev/null
+++ b/board/compulab/common/omap3_smc911x.c
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+
+#include "common.h"
+
+static u32 cl_omap3_smc911x_gpmc_net_config[GPMC_MAX_REG] = {
+ NET_GPMC_CONFIG1,
+ NET_GPMC_CONFIG2,
+ NET_GPMC_CONFIG3,
+ NET_GPMC_CONFIG4,
+ NET_GPMC_CONFIG5,
+ NET_GPMC_CONFIG6,
+ 0
+};
+
+static void cl_omap3_smc911x_setup_net_chip_gmpc(int cs, u32 base_addr)
+{
+ struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+ enable_gpmc_cs_config(cl_omap3_smc911x_gpmc_net_config,
+ &gpmc_cfg->cs[cs], base_addr, GPMC_SIZE_16M);
+
+ /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+ writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+
+ /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+
+ /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+ &ctrl_base->gpmc_nadv_ale);
+}
+
+#ifdef CONFIG_OMAP_GPIO
+static int cl_omap3_smc911x_reset_net_chip(int gpio)
+{
+ int err;
+
+ if (!gpio_is_valid(gpio))
+ return -EINVAL;
+
+ err = gpio_request(gpio, "eth rst");
+ if (err)
+ return err;
+
+ /* Set gpio as output and send a pulse */
+ gpio_direction_output(gpio, 1);
+ udelay(1);
+ gpio_set_value(gpio, 0);
+ mdelay(40);
+ gpio_set_value(gpio, 1);
+ mdelay(1);
+
+ return 0;
+}
+#else /* !CONFIG_OMAP_GPIO */
+static inline int cl_omap3_smc911x_reset_net_chip(int gpio) { return 0; }
+#endif /* CONFIG_OMAP_GPIO */
+
+int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio)
+{
+ int ret;
+
+ cl_omap3_smc911x_setup_net_chip_gmpc(cs, base_addr);
+
+ if (reset)
+ reset(rst_gpio);
+ else
+ cl_omap3_smc911x_reset_net_chip(rst_gpio);
+
+ ret = smc911x_initialize(id, base_addr);
+ if (ret > 0)
+ return ret;
+
+ printf("Failed initializing SMC911x! ");
+ return 0;
+}
diff --git a/board/compulab/common/splash.c b/board/compulab/common/splash.c
new file mode 100644
index 0000000..49ed49b
--- /dev/null
+++ b/board/compulab/common/splash.c
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <bmp_layout.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static int splash_load_from_nand(u32 bmp_load_addr, int nand_offset)
+{
+ struct bmp_header *bmp_hdr;
+ int res;
+ size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
+
+ if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
+ goto splash_address_too_high;
+
+ res = nand_read_skip_bad(&nand_info[nand_curr_device],
+ nand_offset, &bmp_header_size,
+ NULL, nand_info[nand_curr_device].size,
+ (u_char *)bmp_load_addr);
+ if (res < 0)
+ return res;
+
+ bmp_hdr = (struct bmp_header *)bmp_load_addr;
+ bmp_size = le32_to_cpu(bmp_hdr->file_size);
+
+ if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
+ goto splash_address_too_high;
+
+ return nand_read_skip_bad(&nand_info[nand_curr_device],
+ nand_offset, &bmp_size,
+ NULL, nand_info[nand_curr_device].size,
+ (u_char *)bmp_load_addr);
+
+splash_address_too_high:
+ printf("Error: splashimage address too high. Data overwrites U-Boot "
+ "and/or placed beyond DRAM boundaries.\n");
+
+ return -1;
+}
+#else
+static inline int splash_load_from_nand(u32 bmp_load_addr, int nand_offset)
+{
+ return -1;
+}
+#endif /* CONFIG_CMD_NAND */
+
+int cl_splash_screen_prepare(int nand_offset)
+{
+ char *env_splashimage_value;
+ u32 bmp_load_addr;
+
+ env_splashimage_value = getenv("splashimage");
+ if (env_splashimage_value == NULL)
+ return -1;
+
+ bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
+ if (bmp_load_addr == 0) {
+ printf("Error: bad splashimage address specified\n");
+ return -1;
+ }
+
+ return splash_load_from_nand(bmp_load_addr, nand_offset);
+}
diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index 85c3567..b168074 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -377,7 +377,7 @@ int do_auto_update(void)
{
block_dev_desc_t *stor_dev = NULL;
long sz;
- int i, res, cnt, old_ctrlc;
+ int i, res, old_ctrlc;
char buffer[32];
char str[80];
int n;
@@ -455,7 +455,6 @@ int do_auto_update(void)
clear_ctrlc ();
break;
}
- cnt++;
} while (res < 0);
}
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index 55c20d0..29c688a 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -23,7 +23,7 @@
*/
int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- unsigned int *ptr = 0;
+ unsigned int *ptr;
int count = 0;
int count2 = 0;
int i;
@@ -35,12 +35,14 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
* Mark sync address
*/
ptr = 0;
+ /* cppcheck-suppress nullPointer */
*ptr = 0xffffffff;
puts("\nWaiting for image from pci host -");
/*
* Wait for host to write the start address
*/
+ /* cppcheck-suppress nullPointer */
while (*ptr == 0xffffffff) {
count++;
if (!(count % 100)) {
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 2ddb3da..b9aff1a 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -360,6 +360,7 @@ static int do_checktestboot(cmd_tbl_t *cmdtp, int flag, int argc,
testboot = (testpin != 0) && (s);
if (verbose) {
printf("testpin = %d\n", testpin);
+ /* cppcheck-suppress nullPointer */
printf("test_bank = %s\n", s ? s : "not set");
printf("boot test app : %s\n", (testboot) ? "yes" : "no");
}
diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c
index 1a2ac8d..db42987 100644
--- a/board/matrix_vision/mvblx/sys_eeprom.c
+++ b/board/matrix_vision/mvblx/sys_eeprom.c
@@ -348,7 +348,7 @@ int mac_read_from_eeprom(void)
if (memcmp(&e.mac, "\0\0\0\0\0\0", 6) &&
memcmp(&e.mac, "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
- char ethaddr[9];
+ char ethaddr[18];
sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
e.mac[0],
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
index e3a582f..73bfa00 100644
--- a/board/scb9328/flash.c
+++ b/board/scb9328/flash.c
@@ -72,8 +72,10 @@ static FLASH_BUS_RET flash_status_reg (void)
FLASH_BUS *addr = (FLASH_BUS *) 0;
+ /* cppcheck-suppress nullPointer */
*addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+ /* cppcheck-suppress nullPointer */
return *addr;
}
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 64e69dc..559af0e 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -229,7 +229,7 @@ int board_eth_init(bd_t *bis)
#endif /* #ifdef CONFIG_FACTORYSET */
/* Set rgmii mode and enable rmii clock to be sourced from chip */
- writel(RGMII_MODE_ENABLE , &cdev->miisel);
+ writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
rv = cpsw_register(&cpsw_data);
if (rv < 0)
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
index b9f6bd7..1ddbb2c 100644
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -22,4 +22,19 @@ config CONS_INDEX
board you may want something other than UART0 as for example the IDK
uses UART3 so enter 4 here.
+config NOR
+ bool "Support for NOR flash"
+ help
+ The AM335x SoC supports having a NOR flash connected to the GPMC.
+ In practice this is seen as a NOR flash module connected to the
+ "memory cape" for the BeagleBone family.
+
+config NOR_BOOT
+ bool "Support for booting from NOR flash"
+ depends on NOR
+ help
+ Enabling this will make a U-Boot binary that is capable of being
+ booted via NOR. In this case we will enable certain pinmux early
+ as the ROM only partially sets up pinmux. We also default to using
+ NOR for environment.
endif
diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README
index a551e28..9ee90a4 100644
--- a/board/ti/ks2_evm/README
+++ b/board/ti/ks2_evm/README
@@ -3,10 +3,11 @@ U-Boot port for Texas Instruments Keystone II EVM boards
Author: Murali Karicheri <m-karicheri2@ti.com>
-This README has information on the u-boot port for K2HK, K2E boards.
+This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards.
Documentation for this board can be found at
http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
The K2HK board is based on Texas Instruments Keystone2 family of SoCs: K2H, K2K.
More details on these SoCs are available at company websites
@@ -14,7 +15,10 @@ More details on these SoCs are available at company websites
K2H: http://www.ti.com/product/tci6638k2h
The K2E SoC details are available at
- K2E http://www.ti.com/lit/ds/symlink/66ak2e05.pdf
+ http://www.ti.com/lit/ds/symlink/66ak2e05.pdf
+
+The K2L SoC details are available at
+ http://www.ti.com/lit/ds/symlink/tci6630k2l.pdf
Board configuration:
====================
@@ -25,6 +29,7 @@ Some of the peripherals that are configured by u-boot
+------+-------+-------+-----------+-----------+-------+-------+----+
|K2HK |2 |512MB |6MB |4(2) |2 |3 |3 |
|K2E |4 |512MB |2MB |8(2) |2 |3 |3 |
+|K2L |2 |512MB |2MB |4(2) |4 |3 |3 |
+------+-------+-------+-----------+-----------+-------+-------+----+
There are only 2 eth port installed on the boards.
@@ -41,10 +46,13 @@ The port related files can be found at following folders
Board configuration files:
include/configs/k2hk_evm.h
include/configs/k2e_evm.h
+include/configs/k2l_evm.h
+include/configs/k2l_evm.h
As u-boot is migrating to Kconfig there is also board defconfig files
configs/k2e_evm_defconfig
configs/k2hk_evm_defconfig
+configs/k2l_evm_defconfig
Supported boot modes:
- SPI NOR boot
@@ -58,7 +66,7 @@ Supported image formats:
Build instructions:
===================
-Examples for k2hk, for k2e just replace k2hk prefix accordingly.
+Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly.
Don't forget to add ARCH=arm and CROSS_COMPILE.
To build u-boot.bin
@@ -84,6 +92,8 @@ Use u-boot.bin from the build folder for loading and running u-boot binary
on EVM. Follow instructions at
K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup
K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup
+K2L http://processors.wiki.ti.com/index.php/TCIEVMK2L_Hardware_Setup
+
to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode"
and Power ON the EVM. Follow instructions to connect serial port of EVM to
PC and start TeraTerm or Hyper Terminal.
@@ -128,8 +138,8 @@ instructions:
2. Suspend Target. Select Run -> Suspend from top level menu
CortexA15_1 (Free Running)"
3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000
- through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E EVM
- using CCS", but using address 0x87000000.
+ through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L
+ EVM using CCS", but using address 0x87000000.
4. Free Run the target as described earlier (step 4) to get u-boot prompt
5. At the U-Boot console type following to setup u-boot environment variables.
setenv addr_uboot 0x87000000
diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
index 4029493..ff7bc4b 100644
--- a/board/ti/ks2_evm/board.c
+++ b/board/ti/ks2_evm/board.c
@@ -122,7 +122,6 @@ void ft_board_setup(void *blob, bd_t *bd)
int nbanks;
u64 size[2];
u64 start[2];
- char name[32];
int nodeoffset;
u32 ddr3a_size;
int unitrd_fixup = 0;
@@ -158,15 +157,13 @@ void ft_board_setup(void *blob, bd_t *bd)
}
/* reserve memory at start of bank */
- sprintf(name, "mem_reserve_head");
- env = getenv(name);
+ env = getenv("mem_reserve_head");
if (env) {
start[0] += ustrtoul(env, &endp, 0);
size[0] -= ustrtoul(env, &endp, 0);
}
- sprintf(name, "mem_reserve");
- env = getenv(name);
+ env = getenv("mem_reserve");
if (env)
size[0] -= ustrtoul(env, &endp, 0);
diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c
index 559d20c..729a193 100644
--- a/board/ti/ks2_evm/board_k2l.c
+++ b/board/ti/ks2_evm/board_k2l.c
@@ -10,7 +10,7 @@
#include <common.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
-#include <asm/ti-common/ti-aemif.h>
+#include <asm/ti-common/keystone_net.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -42,6 +42,44 @@ static struct pll_init_data tetris_pll_config[] = {
static struct pll_init_data pa_pll_config =
PASS_PLL_983;
+#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
+struct eth_priv_t eth_priv_cfg[] = {
+ {
+ .int_name = "K2L_EMAC",
+ .rx_flow = 0,
+ .phy_addr = 0,
+ .slave_port = 1,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2L_EMAC1",
+ .rx_flow = 8,
+ .phy_addr = 1,
+ .slave_port = 2,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2L_EMAC2",
+ .rx_flow = 16,
+ .phy_addr = 2,
+ .slave_port = 3,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2L_EMAC3",
+ .rx_flow = 32,
+ .phy_addr = 3,
+ .slave_port = 4,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+};
+
+int get_num_eth_ports(void)
+{
+ return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
+}
+#endif
+
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{