diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/ronetix/pm9263/led.c | 15 | ||||
-rw-r--r-- | board/ronetix/pm9263/pm9263.c | 195 |
2 files changed, 109 insertions, 101 deletions
diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c index fe1a1d2..4e585a4 100644 --- a/board/ronetix/pm9263/led.c +++ b/board/ronetix/pm9263/led.c @@ -26,18 +26,19 @@ #include <common.h> #include <asm/arch/at91sam9263.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> #include <asm/arch/io.h> void coloured_LED_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | - 1 << AT91SAM9263_ID_PIOCDE); + writel(1 << AT91SAM9263_ID_PIOB, &pmc->pcer); - at91_set_gpio_output(CONFIG_RED_LED, 1); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_pio_output(CONFIG_RED_LED, 1); + at91_set_pio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(CONFIG_RED_LED, 0); - at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_pio_value(CONFIG_RED_LED, 0); + at91_set_pio_value(CONFIG_GREEN_LED, 1); } diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 23ea154..c7835de 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -27,13 +27,13 @@ #include <common.h> #include <asm/sizes.h> #include <asm/arch/at91sam9263.h> -#include <asm/arch/at91sam9263_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_matrix.h> +#include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> -#include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h> #include <lcd.h> @@ -55,52 +55,59 @@ DECLARE_GLOBAL_DATA_PTR; static void pm9263_nand_hw_init(void) { unsigned long csa; + at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE; + at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, - csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; + writel(csa, &matrix->csa[0]); /* Configure SMC CS3 for NAND/SmartMedia */ - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(1) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(1)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1), + &smc->cs[3].setup); + + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_DBW_16 | + AT91_SMC_MODE_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_DBW_8 | + AT91_SMC_MODE_DBW_8 | #endif - AT91_SMC_TDF_(2)); + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif #ifdef CONFIG_MACB static void pm9263_macb_hw_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE; + /* * PB27 enables the 50MHz oscillator for Ethernet PHY * 1 - enable * 0 - disable */ - at91_set_gpio_output(AT91_PIN_PB27, 1); - at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */ + at91_set_pio_output(AT91_PIO_PORTB, 27, 1); + at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */ /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); + writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer); /* * Disable pull-up on: @@ -110,19 +117,15 @@ static void pm9263_macb_hw_init(void) * * PHY has internal pull-down */ - writel(pin_to_mask(AT91_PIN_PC25), - pin_to_controller(AT91_PIN_PC0) + PIO_PUDR); - writel(pin_to_mask(AT91_PIN_PE25) | - pin_to_mask(AT91_PIN_PE26), - pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); + at91_set_pio_pullup(AT91_PIO_PORTC, 25, 0); + at91_set_pio_pullup(AT91_PIO_PORTE, 25, 0); + at91_set_pio_pullup(AT91_PIO_PORTE, 26, 0); /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PC25), - pin_to_controller(AT91_PIN_PC0) + PIO_PUER); - writel(pin_to_mask(AT91_PIN_PE25) | - pin_to_mask(AT91_PIN_PE26), - pin_to_controller(AT91_PIN_PE0) + PIO_PUER); + at91_set_pio_pullup(AT91_PIO_PORTC, 25, 1); + at91_set_pio_pullup(AT91_PIO_PORTE, 25, 1); + at91_set_pio_pullup(AT91_PIO_PORTE, 26, 1); at91_macb_hw_init(); } @@ -148,17 +151,17 @@ vidinfo_t panel_info = { void lcd_enable(void) { - at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */ + at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power up */ } void lcd_disable(void) { - at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */ + at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */ } #ifdef CONFIG_LCD_IN_PSRAM -#define PSRAM_CRE_PIN AT91_PIN_PB29 +#define PSRAM_CRE_PIN AT91_PIO_PORTB, 29 #define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2) /* Initialize the PSRAM memory */ @@ -166,31 +169,34 @@ static int pm9263_lcd_hw_psram_init(void) { volatile uint16_t x; unsigned long csa; + at91_smc_t *smc = (at91_smc_t *) AT91_SMC1_BASE; + at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; /* Enable CS3 3.3v, no pull-ups */ - csa = at91_sys_read(AT91_MATRIX_EBI1CSA); - at91_sys_write(AT91_MATRIX_EBI1CSA, - csa | AT91_MATRIX_EBI1_DBPUC | - AT91_MATRIX_EBI1_VDDIOMSEL_3_3V); + csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC | + AT91_MATRIX_CSA_VDDIOMSEL_3_3V; + + writel(csa, &matrix->csa[1]); /* Configure SMC1 CS0 for PSRAM - 16-bit */ - at91_sys_write(AT91_SMC1_SETUP(0), - AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC1_PULSE(0), - AT91_SMC_NWEPULSE_(7) | AT91_SMC_NCS_WRPULSE_(7) | - AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(7)); - at91_sys_write(AT91_SMC1_CYCLE(0), - AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); - at91_sys_write(AT91_SMC1_MODE(0), - AT91_SMC_DBW_16 | - AT91_SMC_PMEN | - AT91_SMC_PS_32); + writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[0].setup); + + writel(AT91_SMC_PULSE_NWE(7) | AT91_SMC_PULSE_NCS_WR(7) | + AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(7), + &smc->cs[0].pulse); + + writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8), + &smc->cs[0].cycle); + + writel(AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_PMEN | AT91_SMC_MODE_PS_32, + &smc->cs[0].mode); /* setup PB29 as output */ - at91_set_gpio_output(PSRAM_CRE_PIN, 1); + at91_set_pio_output(PSRAM_CRE_PIN, 1); - at91_set_gpio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */ + at91_set_pio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */ /* PSRAM: write BCR */ x = readw(PSRAM_CTRL_REG); @@ -216,7 +222,7 @@ static int pm9263_lcd_hw_psram_init(void) /* test if the chip is MT45W2M16B */ if ((readw(PHYS_PSRAM) != 0x1234) || (readw(PHYS_PSRAM+2) != 0x5678)) { /* try with CRE=1 (MT45W2M16A) */ - at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */ + at91_set_pio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */ /* write RCR of the PSRAM */ x = readw(PSRAM_CTRL_REG); @@ -229,17 +235,14 @@ static int pm9263_lcd_hw_psram_init(void) writew(0x1234, PHYS_PSRAM); writew(0x5678, PHYS_PSRAM+2); if ((readw(PHYS_PSRAM) != 0x1234) - || (readw(PHYS_PSRAM + 2) != 0x5678)) + || (readw(PHYS_PSRAM + 2) != 0x5678)) return 1; } /* Bus matrix */ - at91_sys_write( AT91_MATRIX_PRAS5, AT91_MATRIX_M5PR ); - at91_sys_write( AT91_MATRIX_SCFG5, AT91_MATRIX_ARBT_FIXED_PRIORITY | - (AT91_MATRIX_FIXED_DEFMSTR & (5 << 18)) | - AT91_MATRIX_DEFMSTR_TYPE_FIXED | - (AT91_MATRIX_SLOT_CYCLE & (0xFF << 0))); + writel(AT91_MATRIX_PRA_M5(3), &matrix->pr[5].a); + writel(CONFIG_PSRAM_SCFG, &matrix->scfg[5]); return 0; } @@ -247,35 +250,37 @@ static int pm9263_lcd_hw_psram_init(void) static void pm9263_lcd_hw_init(void) { - at91_set_A_periph(AT91_PIN_PC0, 0); /* LCDVSYNC */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC); + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ + at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */ + at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */ + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */ + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */ + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */ + at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */ + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ + + writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer); /* Power Control */ - at91_set_gpio_output(AT91_PIN_PA22, 1); - at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */ + at91_set_pio_output(AT91_PIO_PORTA, 22, 1); + at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */ #ifdef CONFIG_LCD_IN_PSRAM /* initialize te PSRAM */ @@ -337,13 +342,15 @@ void lcd_show_board_info(void) int board_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Enable Ctrlc */ console_init_f(); - at91_sys_write(AT91_PMC_PCER, - (1 << AT91SAM9263_ID_PIOA) | - (1 << AT91SAM9263_ID_PIOCDE) | - (1 << AT91SAM9263_ID_PIOB)); + writel((1 << AT91SAM9263_ID_PIOA) | + (1 << AT91SAM9263_ID_PIOCDE) | + (1 << AT91SAM9263_ID_PIOB), + &pmc->pcer); /* arch number of AT91SAM9263EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_PM9263; @@ -394,7 +401,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x01); + rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01); #endif return rc; } |