diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/esd/du440/du440.c | 51 |
1 files changed, 43 insertions, 8 deletions
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 8765cc1..6dca35d 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -52,15 +52,15 @@ int board_early_init_f(void) * Setup the GPIO pins */ out_be32((void*)GPIO0_OR, 0x00000000 | CFG_GPIO0_EP_EEP); - out_be32((void*)GPIO0_TCR, 0x0000000f | CFG_GPIO0_EP_EEP); + out_be32((void*)GPIO0_TCR, 0x0000001f | CFG_GPIO0_EP_EEP); out_be32((void*)GPIO0_OSRL, 0x50055400); - out_be32((void*)GPIO0_OSRH, 0x550050aa); + out_be32((void*)GPIO0_OSRH, 0x55005000); out_be32((void*)GPIO0_TSRL, 0x50055400); out_be32((void*)GPIO0_TSRH, 0x55005000); out_be32((void*)GPIO0_ISR1L, 0x50000000); out_be32((void*)GPIO0_ISR1H, 0x00000000); out_be32((void*)GPIO0_ISR2L, 0x00000000); - out_be32((void*)GPIO0_ISR2H, 0x00000100); + out_be32((void*)GPIO0_ISR2H, 0x00000000); out_be32((void*)GPIO0_ISR3L, 0x00000000); out_be32((void*)GPIO0_ISR3H, 0x00000000); @@ -73,9 +73,9 @@ int board_early_init_f(void) CFG_GPIO1_LEDPOST | CFG_GPIO1_LEDDU); out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU); - out_be32((void*)GPIO1_OSRL, 0x5c280000); + out_be32((void*)GPIO1_OSRL, 0x0c280000); out_be32((void*)GPIO1_OSRH, 0x00000000); - out_be32((void*)GPIO1_TSRL, 0x0c000000); + out_be32((void*)GPIO1_TSRL, 0xcc000000); out_be32((void*)GPIO1_TSRH, 0x00000000); out_be32((void*)GPIO1_ISR1L, 0x00005550); out_be32((void*)GPIO1_ISR1H, 0x00000000); @@ -169,6 +169,7 @@ int misc_init_r(void) unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; + unsigned long sdr0_srst0, sdr0_srst1; int i, j; /* adjust flash start and offset */ @@ -223,10 +224,38 @@ int misc_init_r(void) mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); - /* clear resets */ - udelay (1000); + /* + * Take USB out of reset: + * -Initial status = all cores are in reset + * -deassert reset to OPB1, P4OPB0, OPB2, PLB42OPB1 OPB2PLB40 cores + * -wait 1 ms + * -deassert reset to PHY + * -wait 1 ms + * -deassert reset to HOST + * -wait 4 ms + * -deassert all other resets + */ + mfsdr(SDR0_SRST1, sdr0_srst1); + sdr0_srst1 &= ~(SDR0_SRST1_OPBA1 | \ + SDR0_SRST1_P4OPB0 | \ + SDR0_SRST1_OPBA2 | \ + SDR0_SRST1_PLB42OPB1 | \ + SDR0_SRST1_OPB2PLB40); + mtsdr(SDR0_SRST1, sdr0_srst1); + udelay(1000); + + mfsdr(SDR0_SRST1, sdr0_srst1); + sdr0_srst1 &= ~SDR0_SRST1_USB20PHY; + mtsdr(SDR0_SRST1, sdr0_srst1); + udelay(1000); + + mfsdr(SDR0_SRST0, sdr0_srst0); + sdr0_srst0 &= ~SDR0_SRST0_USB2H; + mtsdr(SDR0_SRST0, sdr0_srst0); + udelay(4000); + + /* finally all the other resets */ mtsdr(SDR0_SRST1, 0x00000000); - udelay (1000); mtsdr(SDR0_SRST0, 0x00000000); printf("USB: Host(int phy)\n"); @@ -733,6 +762,12 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* sdsdp[1]=0x095fa030; */ sdsdp[2] = 0x40082350; sdsdp[3] = 0x0d050000; + } else if (!strcmp(argv[1], "667-166")) { + printf("Bootstrapping for 667-166MHz\n"); + sdsdp[0] = 0x8778a252; + sdsdp[1] = 0x09d7a030; + sdsdp[2] = 0x40082350; + sdsdp[3] = 0x0d050000; } } else { printf("Bootstrapping for 533MHz (default)\n"); |