diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/modnet50/Makefile | 51 | ||||
| -rw-r--r-- | board/modnet50/config.mk | 29 | ||||
| -rw-r--r-- | board/modnet50/flash.c | 538 | ||||
| -rw-r--r-- | board/modnet50/lowlevel_init.S | 204 | ||||
| -rw-r--r-- | board/modnet50/modnet50.c | 49 |
5 files changed, 0 insertions, 871 deletions
diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile deleted file mode 100644 index d5a541f..0000000 --- a/board/modnet50/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := modnet50.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/modnet50/config.mk b/board/modnet50/config.mk deleted file mode 100644 index 4e4d305..0000000 --- a/board/modnet50/config.mk +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2000 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -CONFIG_SYS_TEXT_BASE = 0x00f00000 -#CROSS_COMPILE = arm-elf- diff --git a/board/modnet50/flash.c b/board/modnet50/flash.c deleted file mode 100644 index 4834e21..0000000 --- a/board/modnet50/flash.c +++ /dev/null @@ -1,538 +0,0 @@ -/* - * (C) Copyright 2002 - * MAZeT GmbH <www.mazet.de> - * Stephan Linz <linz@mazet.de>, <linz@li-pro.net> - * - * The most stuff comes from PPCBoot and Linux. - * - * IMMS gGmbH <www.imms.de> - * Thomas Elste <info@elste.org> - * - * Modifications for ModNET50 Board - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/netarm_registers.h> - -#define SCR (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_SYSTEM_CONTROL)) - -#define ALIGN_ABORT_OFF SCR = SCR & ~NETARM_GEN_SYS_CFG_ALIGN_ABORT -#define ALIGN_ABORT_ON SCR = SCR | NETARM_GEN_SYS_CFG_ALIGN_ABORT - -#define PROG_ADDR (0x555*2) -#define SETUP_ADDR (0x555*2) -#define ID_ADDR (0x555*2) -#define UNLOCK_ADDR1 (0x555*2) -#define UNLOCK_ADDR2 (0x2AA*2) - -#define UNLOCK_CMD1 (0xAA) -#define UNLOCK_CMD2 (0x55) -#define ERASE_SUSPEND_CMD (0xB0) -#define ERASE_RESUME_CMD (0x30) -#define RESET_CMD (0xF0) -#define ID_CMD (0x90) -#define SECERASE_CMD (0x30) -#define CHIPERASE_CMD (0x10) -#define PROG_CMD (0xa0) -#define SETUP_CMD (0x80) - -#define DQ2 (0x04) -#define DQ3 (DQ2*2) -#define DQ5 (DQ3*4) -#define DQ6 (DQ5*2) - -#define WRITE_UNLOCK(addr) { \ - *(volatile __u16*)(addr + UNLOCK_ADDR1) = (__u16)UNLOCK_CMD1; \ - *(volatile __u16*)(addr + UNLOCK_ADDR2) = (__u16)UNLOCK_CMD2; \ -} - -#define CONFIG_AM29_RESERVED (0) -#define K (1024) -#define MB (4) - -#define CELL_SIZE (64*K) -#define DEVICE_SIZE (MB*K*K) -#define CELLS_PER_DEVICE (DEVICE_SIZE/CELL_SIZE) -#define RESERVED_CELLS (CONFIG_AM29_RESERVED*K)/CELL_SIZE -#define MAX_FLASH_DEVICES (1) -#define AVAIL_SIZE (DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE) - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; -static __u16 toggling_bits; - - -/*----------------------------------------------------------------------- - */ -ulong flash_get_size (ulong baseaddr, flash_info_t * info) -{ - short i; - __u16 flashtest; - - /* Write auto select command sequence and test FLASH answer */ - WRITE_UNLOCK (baseaddr); - *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD; - flashtest /* manufacturer ID */ = *(volatile __u16 *) (baseaddr); - *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD; - - switch ((__u32) ((flashtest << 16) + flashtest)) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD & FLASH_VENDMASK; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ & FLASH_VENDMASK; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - /* Write auto select command sequence and test FLASH answer */ - WRITE_UNLOCK (baseaddr); - *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD; - flashtest /* device ID */ = *(volatile __u16 *) (baseaddr + 2); - *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD; - - /* toggling_bits = (flashtest == TOSHIBA)?(DQ6):(DQ2|DQ6); */ - toggling_bits = (DQ2 | DQ6); - - switch ((__u32) ((flashtest << 16) + flashtest)) { - case AMD_ID_LV160B: - info->flash_id += - (FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK; - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - info->size = CONFIG_SYS_FLASH_SIZE; - /* 1*16K Boot Block - 2*8K Parameter Block - 1*32K Small Main Block */ - info->start[0] = baseaddr; - info->start[1] = baseaddr + 0x4000; - info->start[2] = baseaddr + 0x6000; - info->start[3] = baseaddr + 0x8000; - for (i = 1; i < info->sector_count; i++) - info->start[3 + i] = baseaddr + i * CONFIG_SYS_MAIN_SECT_SIZE; - break; - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* no or unknown flash */ - } - - for (i = 0; i < info->sector_count; i++) { - /* Write auto select command sequence and test FLASH answer */ - WRITE_UNLOCK (info->start[i]); - *(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) ID_CMD; - flashtest /* protected verify */ = *(volatile __u16 *) (info->start[i] + 4); - *(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) RESET_CMD; - if (flashtest & 0x0001) { - info->protect[i] = 1; /* D0 = 1 if protected */ - } else { - info->protect[i] = 0; - } - } - return (info->size); -} - -/*----------------------------------------------------------------------- - */ -ulong flash_init (void) -{ - ulong size = 0; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here (only one bank) */ - size = flash_get_size (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size, size >> 20); - } - - /* - * protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf ("AMD "); - break; - case FLASH_MAN_FUJ: - printf ("Fujitsu "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AMDL323B: - printf ("29DL323B (32 M, bottom sector)\n"); - break; - case (FLASH_AM160LV | FLASH_AM160B): - printf ("29LV160BE (1M x 16, bottom sector)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 4) == 0) - printf ("\n "); - printf (" S%02d @ 0x%08lX%s", i, - info->start[i], info->protect[i] ? " !" : " "); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ -int flash_check_protection (flash_info_t * info, int s_first, int s_last) -{ - int sect, prot = 0; - - for (sect = s_first; sect <= s_last; sect++) - if (info->protect[sect]) - prot++; - if (prot) - printf ("- can't erase %d protected sectors\n", prot); - return prot; -} - -/*----------------------------------------------------------------------- - */ -int flash_check_erase_amd (ulong start) -{ - __u16 v1, v2; - - v1 = *(volatile __u16 *) (start); - v2 = *(volatile __u16 *) (start); - - if (((v1 ^ v2) & toggling_bits) == toggling_bits) { - if (((v1 | v2) & DQ5) == DQ5) { - printf ("[DQ5] "); - /* OOPS: exceeded timing limits */ - - v1 = *(volatile __u16 *) (start); - v2 = *(volatile __u16 *) (start); - - if (((v1 ^ v2) & toggling_bits) == toggling_bits) { - - printf ("[%s] ", - ((toggling_bits & (DQ2 | DQ6)) == - (DQ2 | DQ6)) ? "DQ2,DQ6" : "DQ6"); - - /* OOPS: there is an erasure in progress, - * try to reset chip */ - *(volatile __u16 *) (start) = - (__u16) RESET_CMD; - - return 1; /* still busy */ - } - } - return 1; /* still busy */ - } - return 0; /* be free */ -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, sect, setup_offset = 0; - int rc = ERR_OK; - ulong start; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - return ERR_UNKNOWN_FLASH_TYPE; - } - - if ((s_first < 0) || (s_first > s_last)) { - printf ("- no sectors to erase\n"); - return ERR_INVAL; - } - - if (flash_check_protection (info, s_first, s_last)) - return ERR_PROTECTED; - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_FUJ: - case FLASH_MAN_AMD: - switch (info->flash_id & FLASH_TYPEMASK) { - case (FLASH_AM160LV | FLASH_AM160B): - setup_offset = UNLOCK_ADDR1; /* just the adress for setup_cmd differs */ - case FLASH_AMDL323B: - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); - sect++) { - printf ("Erasing sector %2d ... ", sect); - - if (info->protect[sect] == 0) { - /* not protected */ - /* Write sector erase command sequence */ - WRITE_UNLOCK (info->start[0]); - *(volatile __u16 *) (info->start[0] + - setup_offset) = - (__u16) SETUP_CMD; - WRITE_UNLOCK (info->start[0]); - *(volatile __u16 *) (info-> - start[sect]) = - (__u16) SECERASE_CMD; - - /* wait some time */ - start = get_timer(0); - while (get_timer(start) < 1000) { - } - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - while (flash_check_erase_amd (info->start[sect])) { - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("timeout!\n"); - /* OOPS: reach timeout, - * try to reset chip - */ - *(volatile __u16 *) (info-> start[sect]) = (__u16) RESET_CMD; - rc = ERR_TIMOUT; - goto outahere_323B; - } - } - printf ("ok.\n"); - } else { - printf ("protected!\n"); - } - } - if (ctrlc ()) - printf ("User Interrupt!\n"); -outahere_323B: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - if (flag) - enable_interrupts (); - return rc; - default: - printf ("- unknown chip type\n"); - return ERR_UNKNOWN_FLASH_TYPE; - } - break; - default: - printf ("- unknown vendor "); - return ERR_UNKNOWN_FLASH_VENDOR; - } -} - -/*----------------------------------------------------------------------- - */ -int flash_check_write_amd (ulong dest) -{ - __u16 v1, v2; - - v1 = *(volatile __u16 *) (dest); - v2 = *(volatile __u16 *) (dest); - - /* DQ6 toggles during write */ - if (((v1 ^ v2) & DQ6) == DQ6) { - if (((v1 | v2) & DQ5) == DQ5) { - printf ("[DQ5] @ %08lX\n", dest); - - /* OOPS: exceeded timing limits, - * try to reset chip */ - *(volatile __u16 *) (dest) = (__u16) RESET_CMD; - return 0; /* be free */ - } - return 1; /* still busy */ - } - - return 0; /* be free */ -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ -static int write_word (flash_info_t * info, ulong dest, ushort data) -{ - int rc = ERR_OK; - int flag; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*(__u16 *) (dest) & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - /* Write program command sequence */ - WRITE_UNLOCK (info->start[0]); - - /* Flash dependend program seqence */ - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_FUJ: - case FLASH_MAN_AMD: - switch (info->flash_id & FLASH_TYPEMASK) { - case (FLASH_AM160LV | FLASH_AM160B): - *(volatile __u16 *) (info->start[0] + UNLOCK_ADDR1) = - (__u16) PROG_CMD; - *(volatile __u16 *) (dest) = (__u16) data; - break; - case FLASH_AMDL323B: - *(volatile __u16 *) (dest) = (__u16) PROG_CMD; - *(volatile __u16 *) (dest) = (__u16) data; - break; - } - } - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - while (flash_check_write_amd (dest)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - printf ("timeout! @ %08lX\n", dest); - /* OOPS: reach timeout, - * try to reset chip */ - *(volatile __u16 *) (dest) = (__u16) RESET_CMD; - - rc = ERR_TIMOUT; - goto outahere_323B; - } - } - - /* Check if Flash was (accurately) written */ - if (*(__u16 *) (dest) != data) - rc = ERR_PROG_ERROR; - -outahere_323B: - if (flag) - enable_interrupts (); - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - ushort data; - int l; - int i, rc; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - for (; i < 2 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((ushort *) src); - if ((rc = write_word (info, wp, data)) != 0) - return (rc); - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) - return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - return write_word (info, wp, data); -} diff --git a/board/modnet50/lowlevel_init.S b/board/modnet50/lowlevel_init.S deleted file mode 100644 index 52ef2a8..0000000 --- a/board/modnet50/lowlevel_init.S +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Memory Setup stuff - taken from Linux - * - * Copyright (c) 2002 Stephan Linz <linz@mazet.de>, <linz@li-pro.net> - * (c) 2004 IMMS gGmbH <www.imms.de>, Thomas Elste <info@elste.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <config.h> -#include <version.h> -#include <asm/arch/netarm_registers.h> - - -/* some parameters for the board */ -#define FLASH_90ns_WAIT_STATES ((NETARM_PLL_COUNT_VAL + 2) / 3) -#define FLASH_70ns_WAIT_STATES 4 - -#define NETARM_MMAP_CS0_BASE (PHYS_FLASH_1) -#if 1 -#define NETARM_MMAP_CS0_MASK (~(PHYS_FLASH_1_SIZE - 1)) -#else -#define NETARM_MMAP_CS0_MASK (~(1000000 - 1)) -#endif -#define NETARM_MMAP_CS1_BASE (PHYS_SDRAM_1) -#define NETARM_MMAP_CS1_MASK (~(PHYS_SDRAM_1_SIZE - 1)) -#define NETARM_MMAP_CS2_BASE (PHYS_SDRAM_2) -#define NETARM_MMAP_CS2_MASK (~(PHYS_SDRAM_2_SIZE - 1)) -#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE) -#define NETARM_MMAP_CS3_BASE (PHYS_NVRAM_1) -#define NETARM_MMAP_CS3_MASK (~(PHYS_NVRAM_SIZE - 1)) -#endif -#define NETARM_MMAP_CS4_BASE (PHYS_EXT_1) -#define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1)) - -/* setting up the memory */ -.globl lowlevel_init -lowlevel_init: - -#if defined(CONFIG_MODNET50) - ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - CONFIG_SYS_TEXT_BASE) - -_jump_to_high: - /* - * MEM Config Reg - * --------------------------------------------------- - */ - ldr r0, =NETARM_MEM_MODULE_BASE - ldr r1, =( NETARM_MEM_REFR_PERIOD_USEC(16) | \ - NETARM_MEM_CFG_REFRESH_EN | \ - NETARM_MEM_CFG_REFR_CYCLE_5CLKS ) - str r1, [r0, #+NETARM_MEM_MODULE_CONFIG] - - -memsetup_cs0: - /* - * Base Addr / Option Reg 0 (Flash) - * --------------------------------------------------- - */ - ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \ - NETARM_MEM_BAR_DRAM_FP | \ - NETARM_MEM_BAR_DRAM_MUX_INT | \ - NETARM_MEM_BAR_DRAM_MUX_BAL | \ - NETARM_MEM_BAR_VALID ) - str r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR] - - /* trust that the bus size for flash was strapped correctly */ - /* this saves the bus width in r2 and then ORs it back in */ - /* it's pretty safe assumption, otherwise it wouldn't boot */ - ldr r2, [r0, #+NETARM_MEM_CS0_OPTIONS] - and r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK - -/* just a test: assume 32 bit flash mem */ -/* mov r2, #NETARM_MEM_OPT_32BIT */ - - ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \ - NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \ - NETARM_MEM_OPT_BCYC_4 | \ - NETARM_MEM_OPT_BSIZE_16 | \ - NETARM_MEM_OPT_16BIT | \ - NETARM_MEM_OPT_READ_ASYNC | \ - NETARM_MEM_OPT_WRITE_ASYNC ) - - orr r1, r1, r2 - str r1, [r0, #+NETARM_MEM_CS0_OPTIONS] - - -memsetup_cs1: - /* - * Base Addr / Option Reg 1 (DRAM #1) - * --------------------------------------------------- - */ -#ifdef CONFIG_NETARM_NET40_REV2 - /* we have to config SDRAM in burst mode */ - ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \ - NETARM_MEM_OPT_BCYC_2 | \ - NETARM_MEM_OPT_BSIZE_16 | \ - NETARM_MEM_OPT_WAIT_STATES(0) | \ - NETARM_MEM_OPT_32BIT | \ - NETARM_MEM_OPT_READ_ASYNC | \ - NETARM_MEM_OPT_WRITE_ASYNC ) - str r1, [r0, #+NETARM_MEM_CS1_OPTIONS] - - ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \ - NETARM_MEM_BAR_DRAM_SYNC | \ - NETARM_MEM_BAR_DRAM_MUX_INT | \ - NETARM_MEM_BAR_DRAM_MUX_UNBAL | \ - NETARM_MEM_BAR_DRAM_SEL | \ - NETARM_MEM_BAR_BURST_EN | \ - NETARM_MEM_BAR_VALID ) - str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR] -#else - /* we have to config FPDRAM in burst mode with smaller burst access size */ - ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \ - NETARM_MEM_OPT_BCYC_2 | \ - NETARM_MEM_OPT_BSIZE_16 | \ - NETARM_MEM_OPT_WAIT_STATES(0) | \ - NETARM_MEM_OPT_32BIT | \ - NETARM_MEM_OPT_READ_ASYNC | \ - NETARM_MEM_OPT_WRITE_ASYNC ) - str r1, [r0, #+NETARM_MEM_CS1_OPTIONS] - - ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \ - NETARM_MEM_BAR_DRAM_SYNC | \ - NETARM_MEM_BAR_DRAM_MUX_INT | \ - NETARM_MEM_BAR_DRAM_MUX_UNBAL | \ - NETARM_MEM_BAR_DRAM_SEL | \ - NETARM_MEM_BAR_BURST_EN | \ - NETARM_MEM_BAR_VALID ) - str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR] - -#endif /* CONFIG_NETARM_NET40_REV2 */ - - -memsetup_cs3: - /* - * Base Addr / Option Reg 3 (EEPROM, NVRAM) - * --------------------------------------------------- - */ -#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE) - ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \ - NETARM_MEM_OPT_BCYC_3 | \ - NETARM_MEM_OPT_BSIZE_2 | \ - NETARM_MEM_OPT_WAIT_STATES(10) | \ - NETARM_MEM_OPT_8BIT | \ - NETARM_MEM_OPT_READ_ASYNC | \ - NETARM_MEM_OPT_WRITE_ASYNC ) - str r1, [r0, #+NETARM_MEM_CS3_OPTIONS] - - ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \ - NETARM_MEM_BAR_DRAM_FP | \ - NETARM_MEM_BAR_DRAM_MUX_INT | \ - NETARM_MEM_BAR_DRAM_MUX_BAL | \ - NETARM_MEM_BAR_VALID ) - str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR] -#else - /* we don't need EEPROM --> no config */ - ldr r1, =( 0 ) - str r1, [r0, #+NETARM_MEM_CS3_OPTIONS] - - ldr r1, =( 0 ) - str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR] -#endif - - -#else -/* -#error "missing CONFIG_MODNET50 (see your config.h)" -*/ -#endif /* CONFIG_MODNET50 */ - - -lowlevel_init_end: - /* - * manipulate address in lr and ip to match new - * address space - */ - ldr r3, =(NETARM_MMAP_CS0_BASE) - mov r0, lr - add r0, r3, r0 - mov lr, r0 - mov r0, ip - add r0, r3, r0 - mov ip, r0 - - /* everything is fine now */ - mov pc, lr diff --git a/board/modnet50/modnet50.c b/board/modnet50/modnet50.c deleted file mode 100644 index 4544069..0000000 --- a/board/modnet50/modnet50.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* address for the kernel command line */ - gd->bd->bi_boot_params = 0x800; - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - if (CONFIG_NR_DRAM_BANKS == 2) { - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - } - return (0); -} |