diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/bf537-stamp/Makefile | 1 | ||||
| -rw-r--r-- | board/bf537-stamp/nand.c | 100 |
2 files changed, 0 insertions, 101 deletions
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index 4c9e015..f728e2c 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y := $(BOARD).o cmd_bf537led.o COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o COBJS-$(CONFIG_CMD_EEPROM) += spi_flash.o -COBJS-$(CONFIG_CMD_NAND) += nand.o COBJS-$(CONFIG_POST) += post.o post-memory.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c deleted file mode 100644 index 181e83d..0000000 --- a/board/bf537-stamp/nand.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright (c) 2006-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> - -#include <nand.h> - -#define CONCAT(a,b,c,d) a ## b ## c ## d -#define PORT(a,b) CONCAT(pPORT,a,b,) - -#ifndef CONFIG_NAND_GPIO_PORT -#define CONFIG_NAND_GPIO_PORT F -#endif - -/* - * hardware specific access to control-lines - */ -static void bfin_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - register struct nand_chip *this = mtd->priv; - u32 IO_ADDR_W = (u32) this->IO_ADDR_W; - - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_CLE) - IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_CLE; - else - IO_ADDR_W = CONFIG_SYS_NAND_BASE; - if (ctrl & NAND_ALE) - IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_ALE; - else - IO_ADDR_W = CONFIG_SYS_NAND_BASE; - this->IO_ADDR_W = (void __iomem *) IO_ADDR_W; - } - this->IO_ADDR_R = this->IO_ADDR_W; - - /* Drain the writebuffer */ - SSYNC(); - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -int bfin_device_ready(struct mtd_info *mtd) -{ - int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0; - SSYNC(); - return ret; -} - -/* - * Board-specific NAND initialization. The following members of the - * argument are board-specific (per include/linux/mtd/nand.h): - * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device - * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device - * - cmd_ctrl: hardwarespecific function for accesing control-lines - * - dev_ready: hardwarespecific function for accesing device ready/busy line - * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must - * only be provided if a hardware ECC is available - * - ecc.mode: mode of ecc, see defines - * - chip_delay: chip dependent delay for transfering data from array to - * read regs (tR) - * - options: various chip options. They can partly be set to inform - * nand_scan about special functionality. See the defines for further - * explanation - * Members with a "?" were not set in the merged testing-NAND branch, - * so they are not set here either. - */ -int board_nand_init(struct nand_chip *nand) -{ - *PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY; - *PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY; - *PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY; - - nand->cmd_ctrl = bfin_hwcontrol; - nand->ecc.mode = NAND_ECC_SOFT; - nand->dev_ready = bfin_device_ready; - nand->chip_delay = 30; - - return 0; -} |