diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/amcc/common/flash.c | 60 | ||||
| -rw-r--r-- | board/amcc/yucca/yucca.c | 105 | ||||
| -rw-r--r-- | board/amcc/yucca/yucca.h | 3 | ||||
| -rw-r--r-- | board/cpu87/cpu87.c | 8 | ||||
| -rw-r--r-- | board/mcc200/Makefile | 2 | ||||
| -rw-r--r-- | board/mcc200/lcd.c | 190 | ||||
| -rw-r--r-- | board/mcc200/mcc200.c | 4 | ||||
| -rw-r--r-- | board/tqm5200/tqm5200.c | 6 |
8 files changed, 329 insertions, 49 deletions
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c index a0acbba..e6429ec 100644 --- a/board/amcc/common/flash.c +++ b/board/amcc/common/flash.c @@ -35,7 +35,7 @@ #include <ppc4xx.h> #include <asm/processor.h> -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- * Functions @@ -76,7 +76,7 @@ void flash_print_info(flash_info_t * info) case FLASH_MAN_SST: printf("SST "); break; - case FLASH_MAN_MX: + case FLASH_MAN_MX: printf ("MACRONIX "); break; default: @@ -223,75 +223,75 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info) return (0); /* no or unknown flash */ } - value = addr2[1]; /* device ID */ + value = addr2[1]; /* device ID */ DEBUGF("\nFLASH DEVICEID: %x\n", value); switch (value) { case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B: info->flash_id += FLASH_AM040; info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ + info->size = 0x0080000; /* => 512 KiB */ break; case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B: info->flash_id += FLASH_AM040; info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ + info->size = 0x0080000; /* => 512 KiB */ break; case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B: info->flash_id += FLASH_AM040; info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ + info->size = 0x0080000; /* => 512 KiB */ break; case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D: info->flash_id += FLASH_AMD016; info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ + info->size = 0x00200000; /* => 2 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C: info->flash_id += FLASH_AMDLV033C; info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ + info->size = 0x00400000; /* => 4 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T: info->flash_id += FLASH_AM400T; info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ + info->size = 0x00080000; /* => 512 KiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B: info->flash_id += FLASH_AM400B; info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ + info->size = 0x00080000; /* => 512 KiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T: info->flash_id += FLASH_AM800T; info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ + info->size = 0x00100000; /* => 1 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B: info->flash_id += FLASH_AM800B; info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ + info->size = 0x00100000; /* => 1 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T: info->flash_id += FLASH_AM160T; info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ + info->size = 0x00200000; /* => 2 MiB */ + break; case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B: info->flash_id += FLASH_AM160B; info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ + info->size = 0x00200000; /* => 2 MiB */ + break; default: info->flash_id = FLASH_UNKNOWN; @@ -306,7 +306,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info) info->start[i] = base + (i * 0x00010000); } else { if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ + /* set sector offsets for bottom boot block type */ info->start[0] = base + 0x00000000; info->start[1] = base + 0x00004000; info->start[2] = base + 0x00006000; @@ -316,7 +316,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info) base + (i * 0x00010000) - 0x00030000; } } else { - /* set sector offsets for top boot block type */ + /* set sector offsets for top boot block type */ i = info->sector_count - 1; info->start[i--] = base + info->size - 0x00004000; info->start[i--] = base + info->size - 0x00006000; @@ -666,7 +666,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) return (0); /* no or unknown flash */ } - value = addr2[1]; /* device ID */ + value = addr2[1]; /* device ID */ DEBUGF("\nFLASH DEVICEID: %x\n", value); @@ -675,17 +675,17 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T: info->flash_id += FLASH_AM320T; info->sector_count = 71; - info->size = 0x00400000; break; /* => 4 MB */ + info->size = 0x00400000; break; /* => 4 MiB */ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B: info->flash_id += FLASH_AM320B; info->sector_count = 71; - info->size = 0x00400000; break; /* => 4 MB */ + info->size = 0x00400000; break; /* => 4 MiB */ case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT: info->flash_id += FLASH_STMW320DT; info->sector_count = 67; - info->size = 0x00400000; break; /* => 4 MB */ + info->size = 0x00400000; break; /* => 4 MiB */ case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T: info->flash_id += FLASH_MXLV320T; @@ -743,7 +743,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) info->start[i] = base + i * 0x00010000; } else { if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ + /* set sector offsets for bottom boot block type */ info->start[0] = base + 0x00000000; info->start[1] = base + 0x00004000; info->start[2] = base + 0x00006000; @@ -753,7 +753,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) base + (i * 0x00010000) - 0x00030000; } } else { - /* set sector offsets for top boot block type */ + /* set sector offsets for top boot block type */ i = info->sector_count - 1; info->start[i--] = base + info->size - 0x00004000; info->start[i--] = base + info->size - 0x00006000; diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index af12839..cd17526 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -32,6 +32,10 @@ #include <asm-ppc/io.h> #include "yucca.h" +#include "../cpu/ppc4xx/440spe_pcie.h" + +#undef PCIE_ENDPOINT +/* #define PCIE_ENDPOINT 1 */ void fpga_init (void); @@ -562,10 +566,11 @@ int checkboard (void) static long int yucca_probe_for_dimms(void) { - long int dimm_installed[MAXDIMMS]; - long int dimm_num, probe_result; - long int dimms_found = 0; - uchar dimm_addr = IIC0_DIMM0_ADDR; + int dimm_installed[MAXDIMMS]; + int dimm_num, result; + int dimms_found = 0; + uchar dimm_addr = IIC0_DIMM0_ADDR; + uchar dimm_spd_data[MAX_SPD_BYTES]; for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { /* check if there is a chip at the dimm address */ @@ -577,12 +582,28 @@ static long int yucca_probe_for_dimms(void) dimm_addr = IIC0_DIMM1_ADDR; break; } - probe_result = i2c_probe(dimm_addr); - if (probe_result == 0) { + result = i2c_probe(dimm_addr); + + memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char)); + if (result == 0) { + /* read first byte of SPD data, if there is any data */ + result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1); + + if (result == 0) { + result = dimm_spd_data[0]; + result = result > MAX_SPD_BYTES ? + MAX_SPD_BYTES : result; + result = i2c_read(dimm_addr, 0, 1, + dimm_spd_data, result); + } + } + + if ((result == 0) && + (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) { dimm_installed[dimm_num] = TRUE; dimms_found++; - debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num); + debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num); } else { dimm_installed[dimm_num] = FALSE; debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num); @@ -1012,6 +1033,57 @@ void yucca_setup_pcie_fpga_rootpoint(int port) out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C)); } +/* + * For the given slot, set endpoint mode, send power to the slot, + * turn on the green LED and turn off the yellow LED, enable the clock + * .In end point mode reset bit is read only. + */ +void yucca_setup_pcie_fpga_endpoint(int port) +{ + u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + + switch(port) { + case 0: + rootpoint = FPGA_REG1C_PE0_ROOTPOINT; + endpoint = 0; + power = FPGA_REG1A_PE0_PWRON; + green_led = FPGA_REG1A_PE0_GLED; + clock = FPGA_REG1A_PE0_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE0_YLED; + reset_off = FPGA_REG1C_PE0_PERST; + break; + case 1: + rootpoint = 0; + endpoint = FPGA_REG1C_PE1_ENDPOINT; + power = FPGA_REG1A_PE1_PWRON; + green_led = FPGA_REG1A_PE1_GLED; + clock = FPGA_REG1A_PE1_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE1_YLED; + reset_off = FPGA_REG1C_PE1_PERST; + break; + case 2: + rootpoint = 0; + endpoint = FPGA_REG1C_PE2_ENDPOINT; + power = FPGA_REG1A_PE2_PWRON; + green_led = FPGA_REG1A_PE2_GLED; + clock = FPGA_REG1A_PE2_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE2_YLED; + reset_off = FPGA_REG1C_PE2_PERST; + break; + + default: + return; + } + + out_be16((u16 *)FPGA_REG1A, + ~(power | clock | green_led) & + (yellow_led | in_be16((u16 *)FPGA_REG1A))); + + out_be16((u16 *)FPGA_REG1C, + ~(rootpoint | reset_off) & + (endpoint | in_be16((u16 *)FPGA_REG1C))); +} + static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; @@ -1031,9 +1103,13 @@ void pcie_setup_hoses(void) if (!yucca_pcie_card_present(i)) continue; +#ifdef PCIE_ENDPOINT + yucca_setup_pcie_fpga_endpoint(i); + if (ppc440spe_init_pcie_endport(i)) { +#else yucca_setup_pcie_fpga_rootpoint(i); - if (ppc440spe_init_pcie_rootport(i)) { +#endif printf("PCIE%d: initialization failed\n", i); continue; } @@ -1053,8 +1129,19 @@ void pcie_setup_hoses(void) hose->region_count = 1; pci_register_hose(hose); - ppc440spe_setup_pcie(hose, i); +#ifdef PCIE_ENDPOINT + ppc440spe_setup_pcie_endpoint(hose, i); + /* + * Reson for no scanning is endpoint can not generate + * upstream configuration accesses. + */ +#else + ppc440spe_setup_pcie_rootpoint(hose, i); + /* + * Config access can only go down stream + */ hose->last_busno = pci_hose_scan(hose); +#endif } } #endif /* defined(CONFIG_PCI) */ diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h index 66f7584..4d13021 100644 --- a/board/amcc/yucca/yucca.h +++ b/board/amcc/yucca/yucca.h @@ -60,6 +60,9 @@ extern "C" { #define NUM_TLB_ENTRIES 64 +/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */ +#define MICRON_SPD_JEDEC_ID 0x2c + /*----------------------------------------------------------------------------+ | TLB specific defines. +----------------------------------------------------------------------------*/ diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c index e8c2614..9fecdd0 100644 --- a/board/cpu87/cpu87.c +++ b/board/cpu87/cpu87.c @@ -294,15 +294,15 @@ long int initdram (int board_type) */ size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL, (uchar *) CFG_SDRAM_BASE); - + size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL, (uchar *) CFG_SDRAM_BASE); - + size10 = try_init (memctl, CFG_PSDMR_10COL, CFG_OR2_10COL, (uchar *) CFG_SDRAM_BASE); - + psize = max(size8,max(size9,size10)); - + if (psize == size8) { psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL, (uchar *) CFG_SDRAM_BASE); diff --git a/board/mcc200/Makefile b/board/mcc200/Makefile index 4b2bbe2..eb1d059 100644 --- a/board/mcc200/Makefile +++ b/board/mcc200/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o +COBJS := $(BOARD).o lcd.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c new file mode 100644 index 0000000..b262516 --- /dev/null +++ b/board/mcc200/lcd.c @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <lcd.h> +#include <mpc5xxx.h> + +#ifdef CONFIG_LCD + +#define SWAPPED_LCD +/* + * The name of the device used for communication + * with the PSoC. + */ +#define PSOC_PSC MPC5XXX_PSC2 +#define PSOC_BAUD 500000UL + +#define RTS_ASSERT 1 +#define RTS_NEGATE 0 +#define CTS_ASSERT 1 +#define CTS_NEGATE 0 + +/* + * Dimensions in pixels + */ +#define LCD_WIDTH 160 +#define LCD_HEIGHT 100 + +/* + * Dimensions in bytes + */ +#define LCD_BUF_SIZE ((LCD_WIDTH*LCD_HEIGHT)>>3) + +#if LCD_BPP != LCD_MONOCHROME +#error "MCC200 support only monochrome displays (1 bpp)!" +#endif + +#define PSOC_RETRIES 10 /* each of PSOC_WAIT_TIME */ +#define PSOC_WAIT_TIME 10 /* usec */ + +DECLARE_GLOBAL_DATA_PTR; + +/* + * LCD information + */ +vidinfo_t panel_info = { + LCD_WIDTH, LCD_HEIGHT, LCD_BPP +}; + +int lcd_line_length; + +int lcd_color_fg; +int lcd_color_bg; + +/* + * Frame buffer memory information + */ +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +short console_col = 0; +short console_row = 0; + +/* + * The device we use to communicate with PSoC + */ +int serial_inited = 0; + +/* + * Exported functions + */ +void lcd_initcolregs (void); +void lcd_ctrl_init (void *lcdbase); +void lcd_enable (void); + +/* + * Imported functions to support the PSoC protocol + */ +extern int serial_init_dev (unsigned long dev_base); +extern void serial_setrts_dev (unsigned long dev_base, int s); +extern int serial_getcts_dev (unsigned long dev_base); +extern void serial_putc_raw_dev(unsigned long dev_base, const char c); + +/* + * Just stubs for our driver, needed for compiling compabilty with + * the common LCD driver code. + */ +void lcd_initcolregs (void) +{ +} + +void lcd_ctrl_init (void *lcdbase) +{ +} + +/* + * Function sends the contents of the frame-buffer to the LCD + */ +void lcd_enable (void) +{ + int i, retries, fb_size; + + if (!serial_inited) { + unsigned long baud; + + baud = gd->baudrate; + gd->baudrate = PSOC_BAUD; + serial_init_dev(PSOC_PSC); + gd->baudrate = baud; + serial_setrts_dev (PSOC_PSC, RTS_ASSERT); + serial_inited = 1; + } + + /* + * Implement PSoC communication protocol: + * 1. Assert RTS, wait CTS assertion + * 2. Transmit data + * 3. Negate RTS, wait CTS negation + */ + + /* 1 */ + serial_setrts_dev (PSOC_PSC, RTS_ASSERT); + for (retries = PSOC_RETRIES; retries; retries--) { + if (serial_getcts_dev(PSOC_PSC) == CTS_ASSERT) + break; + udelay (PSOC_WAIT_TIME); + } + if (!retries) { + printf ("%s Error: PSoC doesn't respond on " + "RTS ASSERT\n", __FUNCTION__); + } + + /* 2 */ + fb_size = panel_info.vl_row * (panel_info.vl_col >> 3); + +#if !defined(SWAPPED_LCD) + for (i=0; i<fb_size; i++) { + serial_putc_raw_dev (PSOC_PSC, ((char *)lcd_base)[i]); + } +#else + { + int x, y, pwidth; + char *p = (char *)lcd_base; + + pwidth = ((panel_info.vl_col+7) >> 3); + for (y=0; y<panel_info.vl_row; y++) { + i = y * pwidth; + for (x=0; x<pwidth; x+=5) { + serial_putc_raw_dev (PSOC_PSC, (p[i+x+2]<<4 & 0xF0) | (p[i+x+3]>>4 & 0x0F)); + serial_putc_raw_dev (PSOC_PSC, (p[i+x+3]<<4 & 0xF0) | (p[i+x+4]>>4 & 0x0F)); + serial_putc_raw_dev (PSOC_PSC, (p[i+x+4]<<4 & 0xF0) | (p[i+x]>>4 & 0x0F)); + serial_putc_raw_dev (PSOC_PSC, (p[i+x]<<4 & 0xF0) | (p[i+x+1]>>4 & 0x0F)); + serial_putc_raw_dev (PSOC_PSC, (p[i+x+1]<<4 & 0xF0) | (p[i+x+2]>>4 & 0x0F)); + } + } + } +#endif + + /* 3 */ + serial_setrts_dev (PSOC_PSC, RTS_NEGATE); + for (retries = PSOC_RETRIES; retries; retries--) { + if (serial_getcts_dev(PSOC_PSC) == CTS_NEGATE) + break; + udelay (PSOC_WAIT_TIME); + } + if (!retries) { + printf ("%s Error: PSoC doesn't respond on " + "RTS NEGATE\n", __FUNCTION__); + } + + return; +} +#endif /* CONFIG_LCD */ diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 9c57809..71a691b 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -265,8 +265,8 @@ int misc_init_r (void) *(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6); printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n"); flash_info[0].size = 32 << 20; - for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20); - flash_info[0].start[snum] < flash_sup_end; + for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20); + flash_info[0].start[snum] < flash_sup_end; snum++); flash_info[0].sector_count = snum; } diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index c8350ab..2a0d542 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -743,7 +743,7 @@ int board_early_init_f (void) /* Read in TIMER_3 pin status */ timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS; - + #ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* Force silent console mode if S1 switch * is in closed position (TIMER_3 pin status is LOW). */ @@ -757,5 +757,5 @@ int board_early_init_f (void) return 0; } -#endif -#endif +#endif /* CONFIG_FO300 */ +#endif /* CONFIG_BOARD_EARLY_INIT_F */ |