diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/mpc8641hpcn/mpc8641hpcn.c | 64 | ||||
| -rw-r--r-- | board/mpc8641hpcn/oftree.dts | 2 |
2 files changed, 65 insertions, 1 deletions
diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c index 2626ccc..5023c1c 100644 --- a/board/mpc8641hpcn/mpc8641hpcn.c +++ b/board/mpc8641hpcn/mpc8641hpcn.c @@ -359,3 +359,67 @@ my_usage: puts("For example: reset cf 40 2.5 10\n"); puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n"); } + +/* + * get_board_sys_clk + * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ + */ + +unsigned long get_board_sys_clk(ulong dummy) +{ + u8 i, go_bit, rd_clks; + ulong val = 0; + + go_bit = in8(PIXIS_BASE + PIXIS_VCTL); + go_bit &= 0x01; + + rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0); + rd_clks &= 0x1C; + + /* + * Only if both go bit and the SCLK bit in VCFGEN0 are set + * should we be using the AUX register. Remember, we also set the + * GO bit to boot from the alternate bank on the on-board flash + */ + + if (go_bit) { + if (rd_clks == 0x1c) + i = in8(PIXIS_BASE + PIXIS_AUX); + else + i = in8(PIXIS_BASE + PIXIS_SPD); + } else { + i = in8(PIXIS_BASE + PIXIS_SPD); + } + + i &= 0x07; + + switch (i) { + case 0: + val = 33000000; + break; + case 1: + val = 40000000; + break; + case 2: + val = 50000000; + break; + case 3: + val = 66000000; + break; + case 4: + val = 83000000; + break; + case 5: + val = 100000000; + break; + case 6: + val = 134000000; + break; + case 7: + val = 166000000; + break; + } + + return val; +} + diff --git a/board/mpc8641hpcn/oftree.dts b/board/mpc8641hpcn/oftree.dts index e3f5efa..742a140 100644 --- a/board/mpc8641hpcn/oftree.dts +++ b/board/mpc8641hpcn/oftree.dts @@ -187,7 +187,7 @@ compatible = "ns16550"; reg = <4600 100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <1c 2>; interrupt-parent = <40000>; }; |