summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/BuS/eb_cpux9k2/cpux9k2.c52
-rw-r--r--board/atmel/at91rm9200ek/at91rm9200ek.c4
-rw-r--r--board/atmel/at91rm9200ek/led.c22
3 files changed, 40 insertions, 38 deletions
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c
index fe62a0f..e9a1cb2 100644
--- a/board/BuS/eb_cpux9k2/cpux9k2.c
+++ b/board/BuS/eb_cpux9k2/cpux9k2.c
@@ -57,12 +57,12 @@ DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
/* Enable Ctrlc */
console_init_f();
/* Correct IRDA resistor problem / Set PA23_TXD in Output */
- writel(AT91_PMX_AA_TXD2, &pio->pioa.oer);
+ writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
/* adress of boot parameters */
@@ -147,7 +147,7 @@ int dram_init(void)
int board_eth_init(bd_t *bis)
{
int rc = 0;
- rc = at91emac_register(bis, (u32) AT91_EMAC_BASE);
+ rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
return rc;
}
#endif
@@ -164,9 +164,9 @@ int board_eth_init(bd_t *bis)
void cpux9k2_nand_hw_init(void)
{
unsigned long csr;
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_mc_t *mc = (at91_mc_t *) AT91_MC_BASE;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+ at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
/* Setup Smart Media, fitst enable the address range of CS3 */
writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa);
@@ -178,23 +178,23 @@ void cpux9k2_nand_hw_init(void)
AT91_SMC_CSR_WSEN;
writel(csr, &mc->smc.csr[3]);
- writel(AT91_PMX_CA_SMOE | AT91_PMX_CA_SMWE, &pio->pioc.asr);
- writel(AT91_PMX_CA_BFCK | AT91_PMX_CA_SMOE | AT91_PMX_CA_SMWE,
+ writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
+ writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE,
&pio->pioc.pdr);
/* Configure PC2 as input (signal Nand READY ) */
- writel(AT91_PMX_CA_BFAVD, &pio->pioc.per);
- writel(AT91_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
- writel(AT91_PMX_CA_BFCK, &pio->pioc.codr);
+ writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
+ writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
+ writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);
/* PIOC clock enabling */
- writel(1 << AT91_ID_PIOC, &pmc->pcer);
+ writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
}
static void board_nand_hwcontrol(struct mtd_info *mtd,
int cmd, unsigned int ctrl)
{
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
struct nand_chip *this = mtd->priv;
ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
@@ -219,7 +219,7 @@ static void board_nand_hwcontrol(struct mtd_info *mtd,
static int board_nand_dev_ready(struct mtd_info *mtd)
{
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
}
@@ -248,8 +248,8 @@ int drv_video_init(void)
#endif
char *s;
unsigned long csr;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_mc_t *mc = (at91_mc_t *) AT91_MC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+ at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
printf("Init Video as ");
s = getenv("displaywidth");
@@ -270,7 +270,7 @@ int drv_video_init(void)
AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
writel(csr, &mc->smc.csr[2]);
- writel(1 << AT91_ID_PIOB, &pmc->pcer);
+ writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
vcxk_init(display_width, display_height);
#ifdef CONFIG_SPLASH_SCREEN
@@ -290,11 +290,11 @@ int drv_video_init(void)
void i2c_init_board(void)
{
u32 pin;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- writel(1 << AT91_ID_PIOA, &pmc->pcer);
- pin = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK;
+ writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
+ pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK;
writel(pin, &pio->pioa.idr);
writel(pin, &pio->pioa.pudr);
writel(pin, &pio->pioa.per);
@@ -310,7 +310,7 @@ void i2c_init_board(void)
void __led_toggle(led_id_t mask)
{
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
if (readl(&pio->piod.odsr) & mask)
writel(mask, &pio->piod.codr);
@@ -320,10 +320,10 @@ void __led_toggle(led_id_t mask)
void __led_init(led_id_t mask, int state)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- writel(1 << AT91_ID_PIOD, &pmc->pcer); /* Enable PIOB clock */
+ writel(1 << ATMEL_ID_PIOD, &pmc->pcer); /* Enable PIOB clock */
/* Disable peripherals on LEDs */
writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
/* Enable pins as outputs */
@@ -336,7 +336,7 @@ void __led_init(led_id_t mask, int state)
void __led_set(led_id_t mask, int state)
{
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
if (state == STATUS_LED_ON)
writel(mask, &pio->piod.codr);
else
diff --git a/board/atmel/at91rm9200ek/at91rm9200ek.c b/board/atmel/at91rm9200ek/at91rm9200ek.c
index d242583..5ebc24d 100644
--- a/board/atmel/at91rm9200ek/at91rm9200ek.c
+++ b/board/atmel/at91rm9200ek/at91rm9200ek.c
@@ -44,7 +44,7 @@ int board_init(void)
* Correct IRDA resistor problem
* Set PA23_TXD in Output
*/
- writel(AT91_PMX_AA_TXD2, &pio->pioa.oer);
+ writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
/* arch number of AT91RM9200EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200EK;
@@ -65,6 +65,6 @@ int dram_init (void)
#ifdef CONFIG_DRIVER_AT91EMAC
int board_eth_init(bd_t *bis)
{
- return at91emac_register(bis, (u32) AT91_EMAC_BASE);
+ return at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
}
#endif
diff --git a/board/atmel/at91rm9200ek/led.c b/board/atmel/at91rm9200ek/led.c
index 8d512e0..1766ddf 100644
--- a/board/atmel/at91rm9200ek/led.c
+++ b/board/atmel/at91rm9200ek/led.c
@@ -26,8 +26,10 @@
*/
#include <common.h>
-#include <asm/arch/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pio.h>
/* bit mask in PIO port B */
#define GREEN_LED (1<<0)
@@ -36,47 +38,47 @@
void green_LED_on(void)
{
- at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
writel(GREEN_LED, &pio->piob.codr);
}
void yellow_LED_on(void)
{
- at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
writel(YELLOW_LED, &pio->piob.codr);
}
void red_LED_on(void)
{
- at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
writel(RED_LED, &pio->piob.codr);
}
void green_LED_off(void)
{
- at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
writel(GREEN_LED, &pio->piob.sodr);
}
void yellow_LED_off(void)
{
- at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
writel(YELLOW_LED, &pio->piob.sodr);
}
void red_LED_off(void)
{
- at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+ at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
writel(RED_LED, &pio->piob.sodr);
}
void coloured_LED_init (void)
{
- at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE;
- at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+ at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
/* Enable PIOB clock */
- writel(1 << AT91_ID_PIOB, &pmc->pcer);
+ writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
/* Disable peripherals on LEDs */
writel(GREEN_LED | YELLOW_LED | RED_LED, &pio->piob.per);
generated by cgit v1.1 at 2024-11-25 23:10:07 +0000