diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/dbau1x00/dbau1x00.c | 4 | ||||
-rw-r--r-- | board/freescale/common/pixis.c | 5 | ||||
-rw-r--r-- | board/freescale/m54455evb/u-boot.atm | 144 | ||||
-rw-r--r-- | board/freescale/m54455evb/u-boot.int | 141 | ||||
-rw-r--r-- | board/gth2/gth2.c | 6 | ||||
-rw-r--r-- | board/incaip/incaip.c | 5 | ||||
-rw-r--r-- | board/lwmon5/lwmon5.c | 26 | ||||
-rw-r--r-- | board/pb1x00/pb1x00.c | 4 | ||||
-rw-r--r-- | board/purple/flash.c | 2 | ||||
-rw-r--r-- | board/purple/purple.c | 3 | ||||
-rw-r--r-- | board/rsdproto/rsdproto.c | 4 | ||||
-rw-r--r-- | board/tb0229/tb0229.c | 7 |
12 files changed, 330 insertions, 21 deletions
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c index d29e8d5..a13eeeb 100644 --- a/board/dbau1x00/dbau1x00.c +++ b/board/dbau1x00/dbau1x00.c @@ -25,6 +25,7 @@ #include <command.h> #include <asm/au1x00.h> #include <asm/mipsregs.h> +#include <asm/io.h> long int initdram(int board_type) { @@ -77,6 +78,9 @@ int checkboard (void) default: printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); } + + set_io_port_base(0); + #ifdef CONFIG_IDE_PCMCIA /* Enable 3.3 V on slot 0 ( VCC ) No 5V */ diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index fd99a93..45dcf4d 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -207,13 +207,16 @@ void read_from_px_regs_altbank(int set) out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp); } +#ifndef CFG_PIXIS_VBOOT_MASK +#define CFG_PIXIS_VBOOT_MASK 0x40 +#endif void set_altbank(void) { u8 tmp; tmp = in8(PIXIS_BASE + PIXIS_VBOOT); - tmp ^= 0x40; + tmp ^= CFG_PIXIS_VBOOT_MASK; out8(PIXIS_BASE + PIXIS_VBOOT, tmp); } diff --git a/board/freescale/m54455evb/u-boot.atm b/board/freescale/m54455evb/u-boot.atm new file mode 100644 index 0000000..bda68e4 --- /dev/null +++ b/board/freescale/m54455evb/u-boot.atm @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf5445x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m54455evb/u-boot.int b/board/freescale/m54455evb/u-boot.int new file mode 100644 index 0000000..e480c29 --- /dev/null +++ b/board/freescale/m54455evb/u-boot.int @@ -0,0 +1,141 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf5445x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c index ffeaf58..1593f02 100644 --- a/board/gth2/gth2.c +++ b/board/gth2/gth2.c @@ -26,14 +26,13 @@ #include <asm/au1x00.h> #include <asm/addrspace.h> #include <asm/mipsregs.h> +#include <asm/io.h> #include <watchdog.h> #include "ee_access.h" static int wdi_status = 0; -unsigned long mips_io_port_base = 0; - #define SDRAM_SIZE ((64*1024*1024)-(12*4096)) @@ -147,6 +146,9 @@ int checkboard (void) default: printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); } + + set_io_port_base(0); + #ifdef CONFIG_IDE_PCMCIA /* PCMCIA is on a 36 bit physical address. We need to map it into a 32 bit addresses */ diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c index b5d9e00..dbf0ecc 100644 --- a/board/incaip/incaip.c +++ b/board/incaip/incaip.c @@ -25,7 +25,7 @@ #include <command.h> #include <asm/addrspace.h> #include <asm/inca-ip.h> - +#include <asm/io.h> extern uint incaip_get_cpuclk(void); @@ -85,7 +85,6 @@ long int initdram(int board_type) int checkboard (void) { - unsigned long chipid = *INCA_IP_WDT_CHIPID; int part_num; @@ -107,5 +106,7 @@ int checkboard (void) printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000); + set_io_port_base(0); + return 0; } diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 77f9989..9b24a7e 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -96,6 +96,23 @@ int board_early_init_f(void) gpio_write_bit(CFG_GPIO_FLASH_WP, 1); + /* + * Reset PHY's: + * The PHY's need a 2nd reset pulse, since the MDIO address is latched + * upon reset, and with the first reset upon powerup, the addresses are + * not latched reliable, since the IRQ line is multiplexed with an + * MDIO address. A 2nd reset at this time will make sure, that the + * correct address is latched. + */ + gpio_write_bit(CFG_GPIO_PHY0_RST, 1); + gpio_write_bit(CFG_GPIO_PHY1_RST, 1); + udelay(1000); + gpio_write_bit(CFG_GPIO_PHY0_RST, 0); + gpio_write_bit(CFG_GPIO_PHY1_RST, 0); + udelay(1000); + gpio_write_bit(CFG_GPIO_PHY0_RST, 1); + gpio_write_bit(CFG_GPIO_PHY1_RST, 1); + return 0; } @@ -231,15 +248,6 @@ int misc_init_r(void) out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE); /* - * Reset PHY's - */ - gpio_write_bit(CFG_GPIO_PHY0_RST, 0); - gpio_write_bit(CFG_GPIO_PHY1_RST, 0); - udelay(100); - gpio_write_bit(CFG_GPIO_PHY0_RST, 1); - gpio_write_bit(CFG_GPIO_PHY1_RST, 1); - - /* * Init display controller */ /* Setup dot clock (internal PLL, division rate 1/16) */ diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c index 40ac2a4..95b7d82 100644 --- a/board/pb1x00/pb1x00.c +++ b/board/pb1x00/pb1x00.c @@ -25,6 +25,7 @@ #include <command.h> #include <asm/au1x00.h> #include <asm/mipsregs.h> +#include <asm/io.h> long int initdram(int board_type) { @@ -69,6 +70,9 @@ int checkboard (void) default: printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); } + + set_io_port_base(0); + #if defined(CONFIG_IDE_PCMCIA) && 0 /* Enable 3.3 V on slot 0 ( VCC ) No 5V */ diff --git a/board/purple/flash.c b/board/purple/flash.c index 7522580..1baae35 100644 --- a/board/purple/flash.c +++ b/board/purple/flash.c @@ -299,7 +299,7 @@ void flash_print_info (flash_info_t *info) int i; uchar *boottype; uchar *bootletter; - uchar *fmt; + char *fmt; uchar botbootletter[] = "B"; uchar topbootletter[] = "T"; uchar botboottype[] = "bottom boot sector"; diff --git a/board/purple/purple.c b/board/purple/purple.c index 4c3e5b4..74718af 100644 --- a/board/purple/purple.c +++ b/board/purple/purple.c @@ -26,6 +26,7 @@ #include <asm/inca-ip.h> #include <asm/regdef.h> #include <asm/mipsregs.h> +#include <asm/io.h> #include <asm/addrspace.h> #include <asm/cacheops.h> @@ -145,6 +146,8 @@ int checkboard (void) printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000); + set_io_port_base(0); + return 0; } diff --git a/board/rsdproto/rsdproto.c b/board/rsdproto/rsdproto.c index bf4fd53..312d4b8 100644 --- a/board/rsdproto/rsdproto.c +++ b/board/rsdproto/rsdproto.c @@ -210,7 +210,7 @@ void read_RS5C372_time (struct tm *timedate) #define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) - if (i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) { + if (! i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) { timedate->tm_sec = BCD_TO_BIN (buffer[0]); timedate->tm_min = BCD_TO_BIN (buffer[1]); timedate->tm_hour = BCD_TO_BIN (buffer[2]); @@ -231,7 +231,7 @@ int read_LM84_temp (int address) unsigned char buffer[8]; /*int rc;*/ - if (i2c_read (address, 0, 1, buffer, 1)) { + if (! i2c_read (address, 0, 1, buffer, 1)) { return (int) buffer[0]; } else { /*printf("i2c error %02x\n", rc); */ diff --git a/board/tb0229/tb0229.c b/board/tb0229/tb0229.c index e7914bd..61c2e9b 100644 --- a/board/tb0229/tb0229.c +++ b/board/tb0229/tb0229.c @@ -13,10 +13,9 @@ #include <command.h> #include <asm/addrspace.h> #include <asm/inca-ip.h> +#include <asm/io.h> #include <pci.h> -unsigned long mips_io_port_base = 0; - #if defined(CONFIG_PCI) static struct pci_controller hose; @@ -26,17 +25,17 @@ void pci_init_board (void) } #endif - long int initdram(int board_type) { return get_ram_size (CFG_SDRAM_BASE, 0x8000000); } - int checkboard (void) { printf("Board: TANBAC TB0229 "); printf("(CPU Speed %d MHz)\n", (int)CPU_CLOCK_RATE/1000000); + set_io_port_base(0); + return 0; } |